Resource  for zones

Hello,
I've four zones running on PrimePower650 server (8xCPU, 64GB RAM).
All of them are only for developers (different instances of oracle 10g).
Zone config is as minimal as it can be: only shared network (the same interface on global) and FSS enabled.
Should I use some elements from resource control (capped mem and capped cpu) for each zone? 10 minutes ago it was impossible to log-in into global zone (prompt hangs after providing valid pass). When I logged in zone-04 (root@zone-04# poweroff ;)), and turned it off - prompt in global zone began to respond. That's why I think it could be something with resources.
Regards

Welcome to the Boards
This should help
http://dvdstepbystep.com/useelements.php - in some versions the templates may have moved to the Application Support Folder (do a search for .dsptemplate and you can find the path if they have moved outside the application itself, depends on DVD SP version)
You can make you own overlays and menus also, usually you would compile the items outside of DVD SP for best results (in Motion/Photoshop/Final Cut etc.)
http://dvdstepbystep.com/motion.php
http://dvdstepbystep.com/newmap.php

Similar Messages

  • Transportation Planning Error - u2018No resource for optimizationu2019

    Dear All,
    While generating the Transportation proposal , I am getting an error u2018No resource for optimizationu2019. Can anyone please guide me what could be the possible reason for the same? Below are some more information:-
    1. The resources created by us are getting displayed with the following dimensions.
    Weight 40TO, Volume 80M3, Used Qty 0.0, Rem Qty 0.0, Max Utli 0.0, Last Loc u2013 Blank, Multires u2013 false, No. Res. u2013 0, Lock Res u2013 false.
    2. The Freight Unit is having following dimensions. Weight u2013 7.770 KG, Volume 38M3, and one container is assigned as a transportation Unit.
    3. Source and destination locations both are belonging to same transportation zone for which we have defined one intra-zone land and MTr to which this resource is assigned. This is not a passive resource.
    Please advise what could be the possible reason for the same.
    Thanks & Regards,
    Vikram

    Hi Vikram,
    Please check the following
    1) The resource category is "T"
    2) The resource is attached to active model 000
    3)  The resource is attached/assigned to material/item where it is
    getting planned.
    4) All resource data are maintained properly.
    5) Check whether resource is not blocked
    Regards
    R. Senthil Mareeswaran.

  • File upload in KM throws a system exception: java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key xtlt_Required

    Hi All,
    We are on Netweaver 7.01 SP14. (well I understand we are way behind patch levels, but a simple file upload should be working ?/)
    We are trying to upload (HTML &/ Image) a file in one of the KM's public folder.
    As and when we select folder and click on upload we get the below message:
    Below is the error trace details:
    Full Message Text
    com.sapportals.wdf.WdfException
    at com.sapportals.wcm.control.edit.ResourceUploadControl.render(ResourceUploadControl.java:688)
    at com.sapportals.wdf.layout.HorizontalLayout.renderControls(HorizontalLayout.java:42)
    at com.sapportals.wdf.stack.Pane.render(Pane.java:155)
    at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
    at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
    at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
    at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
    at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
    at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
    at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
    at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
    at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
    at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
    at com.sapportals.wdf.WdfCompositeController.internalRender(WdfCompositeController.java:709)
    at com.sapportals.wdf.WdfCompositeController.buildComposition(WdfCompositeController.java:674)
    at com.sapportals.htmlb.AbstractCompositeComponent.preRender(AbstractCompositeComponent.java:33)
    at com.sapportals.htmlb.Container.preRender(Container.java:120)
    at com.sapportals.htmlb.Container.preRender(Container.java:120)
    at com.sapportals.htmlb.Container.preRender(Container.java:120)
    at com.sapportals.portal.htmlb.PrtContext.render(PrtContext.java:408)
    at com.sapportals.htmlb.page.DynPage.doOutput(DynPage.java:238)
    at com.sapportals.wcm.portal.component.base.KMControllerDynPage.doOutput(KMControllerDynPage.java:134)
    at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:133)
    at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
    at com.sapportals.wcm.portal.component.base.ControllerComponent.doContent(ControllerComponent.java:88)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:249)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:557)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1064)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    --- Nested WDF Exception -----------------------
    java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key xtlt_Required
    at java.util.ResourceBundle.getObject(ResourceBundle.java:327)
    at java.util.ResourceBundle.getObject(ResourceBundle.java:324)
    at java.util.ResourceBundle.getString(ResourceBundle.java:287)
    at com.sapportals.wcm.util.resource.ResourceBundles.getString(ResourceBundles.java:55)
    at com.sapportals.wcm.control.base.WcmBaseControl.getBaseBundleString(WcmBaseControl.java:150)
    at com.sapportals.wcm.control.base.WcmBaseControl.getBaseBundleString(WcmBaseControl.java:176)
    at com.sapportals.wcm.control.edit.ResourceUploadControl.renderUploadFileContent(ResourceUploadControl.java:773)
    at com.sapportals.wcm.control.edit.ResourceUploadControl.render(ResourceUploadControl.java:655)
    at com.sapportals.wdf.layout.HorizontalLayout.renderControls(HorizontalLayout.java:42)
    at com.sapportals.wdf.stack.Pane.render(Pane.java:155)
    at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
    at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
    at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
    at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
    at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
    at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
    at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
    at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
    at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
    at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
    at com.sapportals.wdf.WdfCompositeController.internalRender(WdfCompositeController.java:709)
    at com.sapportals.wdf.WdfCompositeController.buildComposition(WdfCompositeController.java:674)
    at com.sapportals.htmlb.AbstractCompositeComponent.preRender(AbstractCompositeComponent.java:33)
    at com.sapportals.htmlb.Container.preRender(Container.java:120)
    at com.sapportals.htmlb.Container.preRender(Container.java:120)
    at com.sapportals.htmlb.Container.preRender(Container.java:120)
    at com.sapportals.portal.htmlb.PrtContext.render(PrtContext.java:408)
    at com.sapportals.htmlb.page.DynPage.doOutput(DynPage.java:238)
    at com.sapportals.wcm.portal.component.base.KMControllerDynPage.doOutput(KMControllerDynPage.java:134)
    at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:133)
    at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
    at com.sapportals.wcm.portal.component.base.ControllerComponent.doContent(ControllerComponent.java:88)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:249)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:557)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1064)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) 

    Hi Vijay,
    Thanks for the quick reply.
    I have gone through the notes 1535201  & now on 1606563  after your advise.
    Both the notes says the fix is available on 7.01 after SP 07 and we are on SP 14 already.
    Also just in case I did checked with our basis and they confirmed we are a head and we have the above notes in our release already.
    Unfortunately the notes are not the solution to the investigation till date.
    Thanks,
    Sai

  • Error encountered while polling the resource for the service endpoint

    Hello everyone
    I'm a newbie on OSB world. Yesterday, I've tried to test OSB with FTP transport and got some problems.
    As you see in the title, I've search this forum to get a solution already, but I couldn't find anything. So that I create a new thread.
    I created a new OSB project, create a new Proxy service to connect to my FTP server:
    - service type: messaging service
    - request message type: Text, response message type: None
    - FTP transport: external user (I used a Service account), Post read action: archive, transfer mode: ascii, some directories needed were created in /tmp directory
    - Message flow: Start node -> pipeline pairs
    in request pipeline of pipeline pairs node: i created a new stage: Assign action -> Log (to get file contents, error severity) -> Assign -> Log (get file name)
    The expected results are: file file content and file name (display in osb console) after I submit a text file to ftp server (using test console or ftp client)
    But, some error occur continuously after I submit a text file (I can get the file content because error raise and log catch it). The error message is show below:
    <Jun 6, 2011 10:04:59 AM EDT> <Error> <ALSB Logging> <BEA-000000> < [PipelinePairNode1, PipelinePairNode1_request, show_text_info, REQUEST] file contents: li
    ag
    a
    glakjgk
    >
    <Jun 6, 2011 10:05:30 AM EDT> <Error> <WliSbTransports> <BEA-381602> <Error encountered while polling the resource for the service endpoint ProxyService$FTPTestProject$ProxyServices$FTPTestPS: *javax.naming.NameNotFoundException:* While trying to lookup *'wlsb.internal.transport.task.queue.ftp'* *didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'*
    *javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'*
         at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
         at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
         at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
         at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
         at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
         Truncated. see log file for complete stacktrace
    >
    <Jun 6, 2011 10:06:30 AM EDT> <Error> <WliSbTransports> <BEA-381602> <Error encountered while polling the resource for the service endpoint ProxyService$FTPTestProject$ProxyServices$FTPTestPS: javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'
    javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'
         at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
         at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
         at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
         at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
         at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
         Truncated. see log file for complete stacktrace
    >
    ...There are many BEA-381602 errors that occur continuously.
    My question is how to solve this problem.
    Any suggestion is appreciated.
    Thank in advance.
    Regards, CuongPT
    Edited by: Doubt_Man on Jun 6, 2011 11:17 AM

    Thank atheek1, I remember that I didnt do any manual configuration on my domain :). I use that domain for testing so that I will create a new domain for comparison.

  • Could not find the principal resource for user id: paf

    I think I have set up iCal server correctly on a MacOSX 10.5.1 server (upgraded from 10.4.x). But regardless of how many different URLs etc I am trying, I can neither access calendars, nor subscribe to them. I am trying both with Safari and Firefox and iCal client on MacOSX 10.5.1.
    I have iCal service running.
    I have added the user "paf" that have full admin access, and also calendar service is turned on on the server calendar.frobbit.se. Calendar.frobbit.se is one of the hostnames for the server btw.
    I have a group called "canusecalendar" that "paf" is a member of.
    The access for iCal service on the host is for the group canusecalendar and for the user paf, where paf is administrator.
    The closest I have come is when I use a web browser and try to access any URL starting with http://calendar.frobbit.se:8008/. It ask for login, I give the credentials, and in the error log for the iCal service I see the following:
    <pre>2008-02-10 20:46:57+0100 [-] [caldav-8009] [AMP,client] Could not find the principal resource for user id: paf</pre>
    I do see tons of postings by people that more or less guess what URIs to use in browsers, for group calendars, in iCal client when connecting to an account or subscribing. Does anyone on this list know of an authoritative list of URLs that one should use here and there? The closest I have come is the "advanced" section of the iCal Administration document from Apple.

    Yes, I add users using workgroup manager, although the one I now use was added already in version 10.4 of MacOSX Server. I.e. before I upgraded to 10.5.
    Here is error.log (after that access.log):
    <pre>
    2008-02-11 20:32:23+0100 [-] Log opened.
    2008-02-11 20:32:23+0100 [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
    2008-02-11 20:32:23+0100 [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
    2008-02-11 20:32:23+0100 [-] 4 processors found, configuring 4 processes.
    2008-02-11 20:32:23+0100 [-] Adding pydirector service with configuration: /tmp/pydirtLZ2ZY
    2008-02-11 20:32:23+0100 [-] twistedcaldav.logging.AMPLoggingFactory starting on "'/var/run/caldavd.sock'"
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Log opened.
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Log opened.
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Log opened.
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Log opened.
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up document root at: /Library/CalendarServer/Documents
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up default ACEs on root resource
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up AdminPrincipals
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting root ACL
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring authentication for realm: /Search
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up scheme: kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up document root at: /Library/CalendarServer/Documents
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up document root at: /Library/CalendarServer/Documents
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up default ACEs on root resource
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up AdminPrincipals
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting root ACL
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up default ACEs on root resource
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up AdminPrincipals
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting root ACL
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up document root at: /Library/CalendarServer/Documents
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up default ACEs on root resource
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up AdminPrincipals
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting root ACL
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Could not start Kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up scheme: digest
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Configuring authentication for realm: /Search
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up scheme: kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Configuring authentication for realm: /Search
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up scheme: kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Configuring authentication for realm: /Search
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up scheme: kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Could not start Kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up scheme: digest
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Could not start Kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up scheme: digest
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Could not start Kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up scheme: digest
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring authentication wrapper
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up service
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c930>
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Adding server at 127.0.0.1:8009
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Adding SSL server at 127.0.0.1:8444
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] twisted.web2.channel.http.HTTPFactory starting on 8009
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] twisted.web2.channel.http.HTTPFactory starting on 8444
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] set uid/gid 93/93
    2008-02-11 20:32:23+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Configuring authentication wrapper
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Setting up service
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Configuring authentication wrapper
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Setting up service
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c7b0>
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Configuring authentication wrapper
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Setting up service
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c7b0>
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Adding server at 127.0.0.1:8011
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c7b0>
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Adding server at 127.0.0.1:8012
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Adding SSL server at 127.0.0.1:8447
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Adding server at 127.0.0.1:8010
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Adding SSL server at 127.0.0.1:8445
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Adding SSL server at 127.0.0.1:8446
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] twisted.web2.channel.http.HTTPFactory starting on 8012
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] twisted.web2.channel.http.HTTPFactory starting on 8010
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] twisted.web2.channel.http.HTTPFactory starting on 8445
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] twisted.web2.channel.http.HTTPFactory starting on 8011
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] twisted.web2.channel.http.HTTPFactory starting on 8446
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] twisted.web2.channel.http.HTTPFactory starting on 8447
    2008-02-11 20:32:25+0100 [-] [caldav-8012] [-] set uid/gid 93/93
    2008-02-11 20:32:25+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:32:25+0100 [-] [caldav-8012] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
    2008-02-11 20:32:25+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:32:25+0100 [-] [caldav-8010] [-] set uid/gid 93/93
    2008-02-11 20:32:25+0100 [-] [caldav-8010] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
    2008-02-11 20:32:25+0100 [-] [caldav-8011] [-] set uid/gid 93/93
    2008-02-11 20:32:25+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:32:25+0100 [-] [caldav-8011] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
    2008-02-11 20:32:57+0100 [-] [caldav-8009] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd-pydir.sock'))
    2008-02-11 20:32:57+0100 [-] [caldav-8009] [AMP,client] Unauthenticated users not enabled with the 'calendar' SACL
    2008-02-11 20:33:04+0100 [-] [caldav-8010] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd-pydir.sock'))
    2008-02-11 20:33:04+0100 [-] [caldav-8010] [AMP,client] Could not find the principal resource for user id: paf
    2008-02-11 20:33:35+0100 [-] Received SIGTERM, shutting down.
    2008-02-11 20:33:35+0100 [-] (Port None Closed)
    2008-02-11 20:33:35+0100 [AMPLoggingProtocol,0,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:33:35+0100 [AMPLoggingProtocol,1,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:33:35+0100 [AMPLoggingProtocol,2,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:33:35+0100 [AMPLoggingProtocol,3,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:33:35+0100 [-] Main loop terminated.
    2008-02-11 20:33:35+0100 [-] Server Shut Down.
    </pre>
    And here is access.log:
    <pre>
    Log opened - server start: [Mon Feb 11 20:32:23 2008].
    192.165.72.12 - - [11/Feb/2008:20:32:57 +0200] "GET / HTTP/1.1" 401 141 "-" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en-us) AppleWebKit/523.10.6 (KHTML, like Gecko) Version/3.0.4 Safari/523.10.6" [6.4 ms]
    192.165.72.12 - - [11/Feb/2008:20:33:04 +0200] "GET / HTTP/1.1" 403 123 "-" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en-us) AppleWebKit/523.10.6 (KHTML, like Gecko) Version/3.0.4 Safari/523.10.6" [60.7 ms]
    Log closed - server stop: [Mon Feb 11 20:33:35 2008].
    </pre>

  • In Search of a Resource for FMS Configuration/Installation

    Good afternoon,
    I'm looking to build a resource list or find someone to help
    with our installation/confiugration of Flash Media Server. Our ITS
    group is shorthanded and I'd like to find someone in the Los
    Angeles area to come in and set it up for us. Where can I find
    contact information (Adobe, other sites, etc) that provides a
    resource for this kind of work.
    Any information would be APPRECIATED,
    Joe Simpson
    [email protected]

    Good afternoon,
    I'm looking to build a resource list or find someone to help
    with our installation/confiugration of Flash Media Server. Our ITS
    group is shorthanded and I'd like to find someone in the Los
    Angeles area to come in and set it up for us. Where can I find
    contact information (Adobe, other sites, etc) that provides a
    resource for this kind of work.
    Any information would be APPRECIATED,
    Joe Simpson
    [email protected]

  • Schedule parallel activities on different resources for the same period

    Hi,
    I am trying to create a PPM where I need to define parallel activities on different resources for the same time period.
    For example:
    Input prod: P1
    Output prod: O1
    Now I define a dummy activity A1 to define this consumption i.e. 1 PC of P1 gives 1 PC of O1.
    Now I have got 3 resources R1, R2, R3.
    I define 3 activities A2, A3, A4 for these resources.
    Now I have to arrange activities A2, A3, A4 such that they start simultaneouly after activity A1 and also end simultaneouly.
    The Fixed duration for all the resources is 1 week.
    My requirement is that out of these resources system should plan for demand considering the resource with minimum capacity
    i.e. kind of bottleneck resource.
    I am using CTM engine for planning.
    I have defined A1 as predecessor for all the 3 activities A2, A3, A4 and after completion all the activities have a dummy successor activity  S.
    But this setting is not working and PPM is not getting exploded, If I use a normal linear relationship between activities it works fine but my requirement is not getting satisfied.
    Can anyone please help me in this case or suggest some alternate method.
    Thanks & Regards,
    Sanjog Mishrikotkar

    Hi,
    You cannot use the old solman key as systems are on different server.
    I think you have to delete the old Dev system and then generate new solman key.
    Thanks
    Sunny

  • What is the best resource for Discoverer novice.

    I need direction in this tool. what is the best resource for me to use.

    Hi Ade
    You could do a lot worse than get hold of a copy of the Oracle Discoverer 10g Handbook that I wrote. It will walk you through much of what you need to know. You can find it on amazon.com or via a link from my website: http://learndiscoverer.com/books/books.htm
    Another good resource would be a training class in either the Admin tool or End User tool or both. Oracle Corporation offer excellent training as do many other companies, including mine. Just google Discoverer Training.
    Further resources are the Oracle By Example series on the OTN forum. These are free. You will find the Discoverer lessons here: http://www.oracle.com/technology/obe/obe_bi/discoverer/discoverer_1012/index.html
    Other resources, such as blogs, abound on the web too. Here are some:
    Oracle BI Blog: http://oraclebi.blogspot.com/
    Mark Rittman: http://www.rittmanmead.com/blog/
    My Blog: http://learndiscoverer.blogspot.com/
    Best wishes
    Michael

  • [SOLVED] X11 error: BadAlloc (insufficient resources for operation)

    Both VLC and mplayer are unable to display video (sound is ok). mplayer complains
    X11 error: BadAlloc (insufficient resources for operation)
    I am able to play the same file with
    mplayer -vo x11
    but no fullscreen with -vo x11 (which is to be expected), and I see no reason why the xv output should not work..
    This is on Dell Latitude D530, intel GM965/GL960. I've switched to arch from gentoo, where it worked, week or two ago.
    Any ideas what can be wrong?
    Last edited by renergy (2014-09-28 10:13:03)

    Have you tried any other video outputs? See 'mplayer -vo help' for the list.
    Try mpv, mplayer's cousin.
    Does it happen only with one file? Run mediainfo on it.
    Edit: Are you using SNA or UXA?
    Compare version numbers and configs of the respective packages of gentoo and Arch. Only what's to blame - the drivers?
    Last edited by karol (2014-09-27 15:14:26)

  • FAQ: What are the best resources for Premiere Pro CS6?

    Here are high quality resources for troubleshooting and tutorials related to Premiere Pro CS6.
    Premiere Pro CS6 troubleshooting articles
    Issue: I'm having trouble downloading and installing Premiere Pro CS6. What do I do?Answer: See troubleshooting documents, post in the appropriate forum, or contact support.
    More info: http://blogs.adobe.com/aftereffects/2013/09/troubleshooting-issues-with-downloading-and-in stalling-after-effects.html
    Issue: What are the system requirements for Premiere Pro CS6?See this article: http://helpx.adobe.com/premiere-pro/system-requirements.html#Adobe%20Premiere%20Pro%20CS6% 20system%20requirements
    Issue: Why won't Premiere Pro CS6 play back AVCHD media?Answer: Update to Premiere Pro CS6 (6.0.5). Previous versions of CS6 had this issue.
    More info: http://blogs.adobe.com/premierepro/2013/08/premiere-pro-cs6-6-0-4-update.html
    Issue: Does Premiere Pro CS6 work with OS X 10.9 (Mavericks)?Answer: Yes, make sure you update to Premiere Pro CS6 (6.0.5)
    More info: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
    Issue: Is there a trial available for Premiere Pro CS6?Answer: Yes, subscribe to the free version of Creative Cloud, then download the trial.
    Issue: I'm having unexpected behavior in Premiere Pro CS6 and want to trash preferences. How do I do that?Answer: See this blog post: http://blogs.adobe.com/genesisproject/2011/02/premiere-pro-cs5-maintenance-two-great-tips. html#more-537
    Issue: I'm getting errors related to QuickTime. What do I do?Answer: See this blog post for troubleshooting items related to QuickTime: http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
    Premiere Pro CS6 tutorials
    Issue: I'm new to Premiere Pro CS6. How do I get started?Answer: See this blog post: http://blogs.adobe.com/kevinmonahan/2011/05/20/getting-started-with-adobe-premiere-pro-cs4 -cs5-cs5-5/
    Issue: I'm switching to Premiere Pro CS6 from Final Cut Pro 7. Are there any tips for me?Answer: See this article by Scott Simmons on Pro Video Coalition: http://provideocoalition.com/ssimmons/story/105_adobe_premiere_pro_cs6_questions_answered
    Issue: I just switched to Premiere Pro CS6 from Final Cut Pro 7. Are there any missing features between the applications?Answer: See this article: http://provideocoalition.com/ssimmons/story/10_fcp_things_fcp_editors_might_be_missing_in_ adobe_premiere_pro_cs6
    Issue: Are there any good, free Premiere Pro CS6 tutorials available?Answer: See these tutorials: http://library.creativecow.net/series/Premiere-Pro-Basics-CS6--above-with-Andrew-Devis
    Issue: How do I optimize Premiere Pro CS6 for best performance?Answer: See this article: https://www.video2brain.com/en/courses/after-effects-premiere-pro-performance-workshop
    Issue: How do I operate the multicam function in Premiere Pro CS6?See this article: http://provideocoalition.com/ssimmons/story/working_with_multicam_in_adobe_premiere_pro_cs 6

    Hi ..
    GO to website www.Apache.org
    down load Apache tomcat server .
    install it ...
    Go to sun site
    c and download jsp tutorials ...
    Go to
    (www.coreservlets.com)download book core servlets
    u can find lots of nice books supported by sun on sunwebsite ...
    Now u r equipped ....
    start doing everything (R &D) on server ..
    Join This JSP forum and ask any thing u didnt got ..or learn or get confused..
    I thing once u go through this ..it will do all what u want
    Hope it helps
    Best of Luck :)
    regds & take care

  • "Missing signed entry in resource" for only some users

    Hi,
    I have recently updated my .jnlp file and .jar file and added some extra jar resources in the new jnlp.
    Since this new version, some users receive an error saying
    "Missing signed entry in resource:" for one particular resource.
    While for other users it works fine.
    I have signed the jar with jarsigner.
    Does anyone have an idea what could be the problem here?
    Thanks very much in advance,
    Best regards,
    Stein Aerts,
    University of Leuven, Belgium

    I remember hearing something like this, and had to do with :
    1.) what version of jarsigner was used to sign the jar, and
    2.) what version of JRE was used to validate the signed jar file on the client.
    (including US only vs. International version of JRE)
    For the jar that gets this error:
    Does it have any empty directories in it., or does it have entries with non-english characters in the resource names ?
    What version of the JDK was used to run jarsigner to sign this jar, and what jre is the application running on ?

  • " Server Error [2009]: Failed to allocate resources for results data" IR Error

    Hi,
    We recently moved form 9.3.3. to 11.1.2.3 and we run only IR and SQR reports. When we run few IR reports we get the below error.
    "Script(x):uncaught exception:  Server Error [2009]: Failed to allocate resources for results data."
    Any thought on what could be the cause. I changed the DSA setting, HTTP config settings for timeouts. I followed a oracle Knowledge base document to make sure I'm setting the right parameters still it doesn't work.
    Any advise will be appreciated.
    Thank you.

    Hi,
    Can you please try to increase the timeout settings for workspace and check the issue.
    You can refer following KM article for more information :
    Hyperion Interactive Reporting (IR) When Processing a BQY in Web Client and iHTML Error: "Server Error [2009] Failed To Allocate Resources To Results Data" [ID 1089121.1]
    To try in 11.1.2.x check these settings in workspace :
    Please go to Navigate -> Administer -> Reporting and Analysis -> Web Applications -> Right click on RA_FRAMEWORK_LWA and select Properties. A
    Window pops up. In that, go to Applications tab and then go to Data Access Servlet. There are two values there
    i) Hyperion Intelligence Client Polling Time(seconds) => Set this to zero
    ii) DAS Response Timeout => Set this to 3600
    Restart the R&A services and WebApp after this change.
    Hope this information helps.
    regards,
    Harish.

  • Authentication failure for zone 1 error

    We did some cleanup of old user accounts in our edir tree and after that I noticed a whole bunch of error messages on our catalina.out file. Problem is the error message does not specify what account it is looking for so I do not know what account I need to restore/recreate. Vibe seems to be working okay so I'm not sure what is broken with this account missing. Error message reads:
    2014-01-18 18:38:02,429 WARN [http-8443-55] [org.kablink.teaming.module.authentication.impl.Aut henticationModuleImpl] - Authentication failure for zone 1: org.springframework.security.userdetails.UsernameN otFoundException: User account disabled or deleted; nested exception is org.kablink.teaming.security.authentication.UserAc countNotActiveException: This account has been disabled or deleted.
    We are running on Vibe 3.4.0. Any help in identifying the account needed would be much appreciated.
    Thank you,
    Ronnie

    This looks okay.  An authFail indicates that someone is polling this device with the wrong community string.  Check x.x.x.x to make sure there aren't any applications polling this device with wrong credentials.
    Something else to note is that you should not be using '@' in your community strings.  While this shouldn't really matter for routers, it's a good rule of thumb not to use '@' on Cisco devices as that character is reserved for community string indexing.

  • Define resource for Anonymous user in OES

    Hi all,,
    I am using wls-ssm.
    By default, OES protect all resources from our application.
    how to define some resources for anonymous user?
    With Regards,
    WP

    You can either define an OES policy to GRANT allusers group which includes anonymous or you can look at deploying this custom authenticator which will exclude WLS resources that typically rely on anonymous user:
    https://oes-sspi-providers.samplecode.oracle.com/

  • Multiple IT Resources for LDAP Server?

    All,
    I have a client with several Sun Java System Directory Server (SJSDS) instances, each containing separate user repositories. The schemas for each SJSDS instance have been customised - uid is not the user identifier attribute, nor is inetorgperson the user objectClass.
    I have imported the SJSDS connector and am stuck at how I can represent these multiple real-world SJSDS instances in OIM. I understand that I can create separate IT Resources for each SJSDS instance, complete with their individual hostnames and IP addresses; this makes sense. However, according to the "Extending the Functionality" guide (http://download.oracle.com/docs/cd/E11223_01/doc.904/e10446/custom.htm#CIHDDEGA), the user identifier attribute and objectClass seem to be defined at the connector level through the Lookup.iPlanet.Configuration Lookup Definition? Am I correct in therefore assuming that this means all of my LDAP Server IT Resources have to share the same user identifier attribute and objectClass?
    Can anyone suggest how I might be able to define unique settings for attributes such as the user identifier attribute and objectClass for each LDAP Server IT Resource? What is the standard approach?
    Also, I read that there is a one-to-one relationship between a process task and its adapter. Does this therefore mean that I should create separate "Create User" adapters for the Process Definition associated with each IT Resource implemented?
    Any guidance / clarification would be greatly appreciated :-)
    Damian

    See this is the underlying assumption for multiple instances creation in OIM for any target system:
    - Create multiple IT Resources of same IT Resource type. Each one will have individual connection parameters specified in it. You know that.
    - Now while provisioning, you just select anyone of this IT Resource as required, so your request is directed towards the required target.
    Note
    - It considers that you are always provisioning same attributes to all those targets because you will always see same process form for all targets.
    - You have same objectClass for all.
    - You have same 'Unique Attribute' and 'Key Fields' for reconciliation.
    - Although you can modify the IT Resource for providing different attribute list for prov and recon based on your target system by providing different values for look up's in place of- AttrName.Prov.Map.iPlanet and AttrName.Recon.Map.iPlanet. But since RO, Process Form etc all are same so no such real usage.
    Note - Lookup - 'AttrName.Prov.Map.iPlanet' has got one attribute objectclass. See if modifying it works. But in OIM process form, attributes will always be same
    Work-Around if above doesn't work
    The only thing you can do is replicate one instance of SJSDS multiple times within OIM for every OIM object. Say if you want 5 different instances of SJSDS then like following:
    - Create 5 identical RO, Process Form, rules, Process Definition, Lookup's etc within xml for every OIM object that you thing will change for all these 5 instances. If anything is common then let all the 5 refer to it. Do it by copying + renaming xml.
    - Now import everything in OIM. So now you can see 5 different RO like SJSDS1, SJSDS2 ,SJSDS3 .. etc for all these 5 instances and they will behave differently with no overlapping and you can configure these individually.
    - But this is very critical procedure. You need to take proper care while replicating.
    Hope it helps.
    Thanks
    Sunny
    Edited by: rajsunny

Maybe you are looking for

  • Album Page not publishing correctly

    I've been using iWeb09 for about a year now for a small gallery. I've never had any problems until I recently tried to create an album page. Setting up the page was easy but I can't get it to publish correctly. Only 2 of the 8 albums appear on my web

  • Restrict my question to one person on this forum

    How do I create a message and send it to only one person on this forum? Thanks!

  • Where is the Real Trial Version of RoboHelp 7

    Support says there is a Splash page - well that has not appeared either. All I did was download a trial version and it extracted, etc. Got to the registration page where it prompts for SN. Has anybody tried the trial yet?

  • Song stopping where it should not

    I brought i song and it stop half way why that ??

  • Reader X, Windows 7, autofill forms wrong

    Reader X, Windows 7, autofill forms wrong I often use pre made forms at work in Reader X. I have auto complete turned on to basic and save numerical is checked, though I rarely use the same numbers. I think this started with the an update of Reader a