Resource for ....

Hi,
Could someone tell me which book/resource is the best for achiving good results in
1z0-044
1z0-046 exams ?
Also which certification can i achieve by passing this exams (OCP/OCE/OCM etc).
rgds
s

WIP  wrote:
Hi,
Could someone tell me which book/resource is the best for achiving good results in
1z0-044
1z0-046 exams ?
Also which certification can i achieve by passing this exams (OCP/OCE/OCM etc).
rgds
sSee: [http://www.oracle.com/education/certification] and drill down to these from Exams - list of exams. That gives recommended training and pre-requisites.
Methinks 1z0-044 has never been begatted.
For 1z0-046 maybe await [http://www.rampant-books.com/book_0902_managing_oracle_on_linux_OCE_oracle_certified_expert.htm] ... i've not seen it but seem reasonable.
Otherwise you will need to attend the relevant oracle course source information from Oracle Online resources plus possibly 2 or 3 books. 1z0-046 is a bit too 32bit orientated for current OEL practice though; and its generally easier to go 64 bit and slam the ram nowadays.

Similar Messages

  • File upload in KM throws a system exception: java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key xtlt_Required

    Hi All,
    We are on Netweaver 7.01 SP14. (well I understand we are way behind patch levels, but a simple file upload should be working ?/)
    We are trying to upload (HTML &/ Image) a file in one of the KM's public folder.
    As and when we select folder and click on upload we get the below message:
    Below is the error trace details:
    Full Message Text
    com.sapportals.wdf.WdfException
    at com.sapportals.wcm.control.edit.ResourceUploadControl.render(ResourceUploadControl.java:688)
    at com.sapportals.wdf.layout.HorizontalLayout.renderControls(HorizontalLayout.java:42)
    at com.sapportals.wdf.stack.Pane.render(Pane.java:155)
    at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
    at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
    at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
    at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
    at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
    at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
    at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
    at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
    at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
    at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
    at com.sapportals.wdf.WdfCompositeController.internalRender(WdfCompositeController.java:709)
    at com.sapportals.wdf.WdfCompositeController.buildComposition(WdfCompositeController.java:674)
    at com.sapportals.htmlb.AbstractCompositeComponent.preRender(AbstractCompositeComponent.java:33)
    at com.sapportals.htmlb.Container.preRender(Container.java:120)
    at com.sapportals.htmlb.Container.preRender(Container.java:120)
    at com.sapportals.htmlb.Container.preRender(Container.java:120)
    at com.sapportals.portal.htmlb.PrtContext.render(PrtContext.java:408)
    at com.sapportals.htmlb.page.DynPage.doOutput(DynPage.java:238)
    at com.sapportals.wcm.portal.component.base.KMControllerDynPage.doOutput(KMControllerDynPage.java:134)
    at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:133)
    at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
    at com.sapportals.wcm.portal.component.base.ControllerComponent.doContent(ControllerComponent.java:88)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:249)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:557)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1064)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    --- Nested WDF Exception -----------------------
    java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key xtlt_Required
    at java.util.ResourceBundle.getObject(ResourceBundle.java:327)
    at java.util.ResourceBundle.getObject(ResourceBundle.java:324)
    at java.util.ResourceBundle.getString(ResourceBundle.java:287)
    at com.sapportals.wcm.util.resource.ResourceBundles.getString(ResourceBundles.java:55)
    at com.sapportals.wcm.control.base.WcmBaseControl.getBaseBundleString(WcmBaseControl.java:150)
    at com.sapportals.wcm.control.base.WcmBaseControl.getBaseBundleString(WcmBaseControl.java:176)
    at com.sapportals.wcm.control.edit.ResourceUploadControl.renderUploadFileContent(ResourceUploadControl.java:773)
    at com.sapportals.wcm.control.edit.ResourceUploadControl.render(ResourceUploadControl.java:655)
    at com.sapportals.wdf.layout.HorizontalLayout.renderControls(HorizontalLayout.java:42)
    at com.sapportals.wdf.stack.Pane.render(Pane.java:155)
    at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
    at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
    at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
    at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
    at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
    at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
    at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
    at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:73)
    at com.sapportals.wdf.stack.Pane.render(Pane.java:158)
    at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:73)
    at com.sapportals.wdf.WdfCompositeController.internalRender(WdfCompositeController.java:709)
    at com.sapportals.wdf.WdfCompositeController.buildComposition(WdfCompositeController.java:674)
    at com.sapportals.htmlb.AbstractCompositeComponent.preRender(AbstractCompositeComponent.java:33)
    at com.sapportals.htmlb.Container.preRender(Container.java:120)
    at com.sapportals.htmlb.Container.preRender(Container.java:120)
    at com.sapportals.htmlb.Container.preRender(Container.java:120)
    at com.sapportals.portal.htmlb.PrtContext.render(PrtContext.java:408)
    at com.sapportals.htmlb.page.DynPage.doOutput(DynPage.java:238)
    at com.sapportals.wcm.portal.component.base.KMControllerDynPage.doOutput(KMControllerDynPage.java:134)
    at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:133)
    at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
    at com.sapportals.wcm.portal.component.base.ControllerComponent.doContent(ControllerComponent.java:88)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:249)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:557)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1064)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) 

    Hi Vijay,
    Thanks for the quick reply.
    I have gone through the notes 1535201  & now on 1606563  after your advise.
    Both the notes says the fix is available on 7.01 after SP 07 and we are on SP 14 already.
    Also just in case I did checked with our basis and they confirmed we are a head and we have the above notes in our release already.
    Unfortunately the notes are not the solution to the investigation till date.
    Thanks,
    Sai

  • Error encountered while polling the resource for the service endpoint

    Hello everyone
    I'm a newbie on OSB world. Yesterday, I've tried to test OSB with FTP transport and got some problems.
    As you see in the title, I've search this forum to get a solution already, but I couldn't find anything. So that I create a new thread.
    I created a new OSB project, create a new Proxy service to connect to my FTP server:
    - service type: messaging service
    - request message type: Text, response message type: None
    - FTP transport: external user (I used a Service account), Post read action: archive, transfer mode: ascii, some directories needed were created in /tmp directory
    - Message flow: Start node -> pipeline pairs
    in request pipeline of pipeline pairs node: i created a new stage: Assign action -> Log (to get file contents, error severity) -> Assign -> Log (get file name)
    The expected results are: file file content and file name (display in osb console) after I submit a text file to ftp server (using test console or ftp client)
    But, some error occur continuously after I submit a text file (I can get the file content because error raise and log catch it). The error message is show below:
    <Jun 6, 2011 10:04:59 AM EDT> <Error> <ALSB Logging> <BEA-000000> < [PipelinePairNode1, PipelinePairNode1_request, show_text_info, REQUEST] file contents: li
    ag
    a
    glakjgk
    >
    <Jun 6, 2011 10:05:30 AM EDT> <Error> <WliSbTransports> <BEA-381602> <Error encountered while polling the resource for the service endpoint ProxyService$FTPTestProject$ProxyServices$FTPTestPS: *javax.naming.NameNotFoundException:* While trying to lookup *'wlsb.internal.transport.task.queue.ftp'* *didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'*
    *javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'*
         at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
         at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
         at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
         at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
         at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
         Truncated. see log file for complete stacktrace
    >
    <Jun 6, 2011 10:06:30 AM EDT> <Error> <WliSbTransports> <BEA-381602> <Error encountered while polling the resource for the service endpoint ProxyService$FTPTestProject$ProxyServices$FTPTestPS: javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'
    javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.ftp' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/ftp'
         at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
         at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
         at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
         at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
         at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
         Truncated. see log file for complete stacktrace
    >
    ...There are many BEA-381602 errors that occur continuously.
    My question is how to solve this problem.
    Any suggestion is appreciated.
    Thank in advance.
    Regards, CuongPT
    Edited by: Doubt_Man on Jun 6, 2011 11:17 AM

    Thank atheek1, I remember that I didnt do any manual configuration on my domain :). I use that domain for testing so that I will create a new domain for comparison.

  • Could not find the principal resource for user id: paf

    I think I have set up iCal server correctly on a MacOSX 10.5.1 server (upgraded from 10.4.x). But regardless of how many different URLs etc I am trying, I can neither access calendars, nor subscribe to them. I am trying both with Safari and Firefox and iCal client on MacOSX 10.5.1.
    I have iCal service running.
    I have added the user "paf" that have full admin access, and also calendar service is turned on on the server calendar.frobbit.se. Calendar.frobbit.se is one of the hostnames for the server btw.
    I have a group called "canusecalendar" that "paf" is a member of.
    The access for iCal service on the host is for the group canusecalendar and for the user paf, where paf is administrator.
    The closest I have come is when I use a web browser and try to access any URL starting with http://calendar.frobbit.se:8008/. It ask for login, I give the credentials, and in the error log for the iCal service I see the following:
    <pre>2008-02-10 20:46:57+0100 [-] [caldav-8009] [AMP,client] Could not find the principal resource for user id: paf</pre>
    I do see tons of postings by people that more or less guess what URIs to use in browsers, for group calendars, in iCal client when connecting to an account or subscribing. Does anyone on this list know of an authoritative list of URLs that one should use here and there? The closest I have come is the "advanced" section of the iCal Administration document from Apple.

    Yes, I add users using workgroup manager, although the one I now use was added already in version 10.4 of MacOSX Server. I.e. before I upgraded to 10.5.
    Here is error.log (after that access.log):
    <pre>
    2008-02-11 20:32:23+0100 [-] Log opened.
    2008-02-11 20:32:23+0100 [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
    2008-02-11 20:32:23+0100 [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
    2008-02-11 20:32:23+0100 [-] 4 processors found, configuring 4 processes.
    2008-02-11 20:32:23+0100 [-] Adding pydirector service with configuration: /tmp/pydirtLZ2ZY
    2008-02-11 20:32:23+0100 [-] twistedcaldav.logging.AMPLoggingFactory starting on "'/var/run/caldavd.sock'"
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Log opened.
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Log opened.
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Log opened.
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Log opened.
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up document root at: /Library/CalendarServer/Documents
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up default ACEs on root resource
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up AdminPrincipals
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting root ACL
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring authentication for realm: /Search
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up scheme: kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up document root at: /Library/CalendarServer/Documents
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up document root at: /Library/CalendarServer/Documents
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up default ACEs on root resource
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up AdminPrincipals
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting root ACL
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up default ACEs on root resource
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up AdminPrincipals
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting root ACL
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up document root at: /Library/CalendarServer/Documents
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up default ACEs on root resource
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up AdminPrincipals
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting root ACL
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Could not start Kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up scheme: digest
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Configuring authentication for realm: /Search
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up scheme: kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Configuring authentication for realm: /Search
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up scheme: kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Configuring authentication for realm: /Search
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up scheme: kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Could not start Kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up scheme: digest
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Could not start Kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up scheme: digest
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Could not start Kerberos
    2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up scheme: digest
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring authentication wrapper
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up service
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c930>
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Adding server at 127.0.0.1:8009
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Adding SSL server at 127.0.0.1:8444
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] twisted.web2.channel.http.HTTPFactory starting on 8009
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] twisted.web2.channel.http.HTTPFactory starting on 8444
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] set uid/gid 93/93
    2008-02-11 20:32:23+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Configuring authentication wrapper
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Setting up service
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Configuring authentication wrapper
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Setting up service
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c7b0>
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Configuring authentication wrapper
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Setting up service
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c7b0>
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Adding server at 127.0.0.1:8011
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c7b0>
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Adding server at 127.0.0.1:8012
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Adding SSL server at 127.0.0.1:8447
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Adding server at 127.0.0.1:8010
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Adding SSL server at 127.0.0.1:8445
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Adding SSL server at 127.0.0.1:8446
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] twisted.web2.channel.http.HTTPFactory starting on 8012
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] twisted.web2.channel.http.HTTPFactory starting on 8010
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
    2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] twisted.web2.channel.http.HTTPFactory starting on 8445
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] twisted.web2.channel.http.HTTPFactory starting on 8011
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
    2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] twisted.web2.channel.http.HTTPFactory starting on 8446
    2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] twisted.web2.channel.http.HTTPFactory starting on 8447
    2008-02-11 20:32:25+0100 [-] [caldav-8012] [-] set uid/gid 93/93
    2008-02-11 20:32:25+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:32:25+0100 [-] [caldav-8012] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
    2008-02-11 20:32:25+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:32:25+0100 [-] [caldav-8010] [-] set uid/gid 93/93
    2008-02-11 20:32:25+0100 [-] [caldav-8010] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
    2008-02-11 20:32:25+0100 [-] [caldav-8011] [-] set uid/gid 93/93
    2008-02-11 20:32:25+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:32:25+0100 [-] [caldav-8011] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
    2008-02-11 20:32:57+0100 [-] [caldav-8009] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd-pydir.sock'))
    2008-02-11 20:32:57+0100 [-] [caldav-8009] [AMP,client] Unauthenticated users not enabled with the 'calendar' SACL
    2008-02-11 20:33:04+0100 [-] [caldav-8010] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd-pydir.sock'))
    2008-02-11 20:33:04+0100 [-] [caldav-8010] [AMP,client] Could not find the principal resource for user id: paf
    2008-02-11 20:33:35+0100 [-] Received SIGTERM, shutting down.
    2008-02-11 20:33:35+0100 [-] (Port None Closed)
    2008-02-11 20:33:35+0100 [AMPLoggingProtocol,0,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:33:35+0100 [AMPLoggingProtocol,1,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:33:35+0100 [AMPLoggingProtocol,2,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:33:35+0100 [AMPLoggingProtocol,3,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
    2008-02-11 20:33:35+0100 [-] Main loop terminated.
    2008-02-11 20:33:35+0100 [-] Server Shut Down.
    </pre>
    And here is access.log:
    <pre>
    Log opened - server start: [Mon Feb 11 20:32:23 2008].
    192.165.72.12 - - [11/Feb/2008:20:32:57 +0200] "GET / HTTP/1.1" 401 141 "-" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en-us) AppleWebKit/523.10.6 (KHTML, like Gecko) Version/3.0.4 Safari/523.10.6" [6.4 ms]
    192.165.72.12 - - [11/Feb/2008:20:33:04 +0200] "GET / HTTP/1.1" 403 123 "-" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en-us) AppleWebKit/523.10.6 (KHTML, like Gecko) Version/3.0.4 Safari/523.10.6" [60.7 ms]
    Log closed - server stop: [Mon Feb 11 20:33:35 2008].
    </pre>

  • In Search of a Resource for FMS Configuration/Installation

    Good afternoon,
    I'm looking to build a resource list or find someone to help
    with our installation/confiugration of Flash Media Server. Our ITS
    group is shorthanded and I'd like to find someone in the Los
    Angeles area to come in and set it up for us. Where can I find
    contact information (Adobe, other sites, etc) that provides a
    resource for this kind of work.
    Any information would be APPRECIATED,
    Joe Simpson
    [email protected]

    Good afternoon,
    I'm looking to build a resource list or find someone to help
    with our installation/confiugration of Flash Media Server. Our ITS
    group is shorthanded and I'd like to find someone in the Los
    Angeles area to come in and set it up for us. Where can I find
    contact information (Adobe, other sites, etc) that provides a
    resource for this kind of work.
    Any information would be APPRECIATED,
    Joe Simpson
    [email protected]

  • Schedule parallel activities on different resources for the same period

    Hi,
    I am trying to create a PPM where I need to define parallel activities on different resources for the same time period.
    For example:
    Input prod: P1
    Output prod: O1
    Now I define a dummy activity A1 to define this consumption i.e. 1 PC of P1 gives 1 PC of O1.
    Now I have got 3 resources R1, R2, R3.
    I define 3 activities A2, A3, A4 for these resources.
    Now I have to arrange activities A2, A3, A4 such that they start simultaneouly after activity A1 and also end simultaneouly.
    The Fixed duration for all the resources is 1 week.
    My requirement is that out of these resources system should plan for demand considering the resource with minimum capacity
    i.e. kind of bottleneck resource.
    I am using CTM engine for planning.
    I have defined A1 as predecessor for all the 3 activities A2, A3, A4 and after completion all the activities have a dummy successor activity  S.
    But this setting is not working and PPM is not getting exploded, If I use a normal linear relationship between activities it works fine but my requirement is not getting satisfied.
    Can anyone please help me in this case or suggest some alternate method.
    Thanks & Regards,
    Sanjog Mishrikotkar

    Hi,
    You cannot use the old solman key as systems are on different server.
    I think you have to delete the old Dev system and then generate new solman key.
    Thanks
    Sunny

  • What is the best resource for Discoverer novice.

    I need direction in this tool. what is the best resource for me to use.

    Hi Ade
    You could do a lot worse than get hold of a copy of the Oracle Discoverer 10g Handbook that I wrote. It will walk you through much of what you need to know. You can find it on amazon.com or via a link from my website: http://learndiscoverer.com/books/books.htm
    Another good resource would be a training class in either the Admin tool or End User tool or both. Oracle Corporation offer excellent training as do many other companies, including mine. Just google Discoverer Training.
    Further resources are the Oracle By Example series on the OTN forum. These are free. You will find the Discoverer lessons here: http://www.oracle.com/technology/obe/obe_bi/discoverer/discoverer_1012/index.html
    Other resources, such as blogs, abound on the web too. Here are some:
    Oracle BI Blog: http://oraclebi.blogspot.com/
    Mark Rittman: http://www.rittmanmead.com/blog/
    My Blog: http://learndiscoverer.blogspot.com/
    Best wishes
    Michael

  • [SOLVED] X11 error: BadAlloc (insufficient resources for operation)

    Both VLC and mplayer are unable to display video (sound is ok). mplayer complains
    X11 error: BadAlloc (insufficient resources for operation)
    I am able to play the same file with
    mplayer -vo x11
    but no fullscreen with -vo x11 (which is to be expected), and I see no reason why the xv output should not work..
    This is on Dell Latitude D530, intel GM965/GL960. I've switched to arch from gentoo, where it worked, week or two ago.
    Any ideas what can be wrong?
    Last edited by renergy (2014-09-28 10:13:03)

    Have you tried any other video outputs? See 'mplayer -vo help' for the list.
    Try mpv, mplayer's cousin.
    Does it happen only with one file? Run mediainfo on it.
    Edit: Are you using SNA or UXA?
    Compare version numbers and configs of the respective packages of gentoo and Arch. Only what's to blame - the drivers?
    Last edited by karol (2014-09-27 15:14:26)

  • FAQ: What are the best resources for Premiere Pro CS6?

    Here are high quality resources for troubleshooting and tutorials related to Premiere Pro CS6.
    Premiere Pro CS6 troubleshooting articles
    Issue: I'm having trouble downloading and installing Premiere Pro CS6. What do I do?Answer: See troubleshooting documents, post in the appropriate forum, or contact support.
    More info: http://blogs.adobe.com/aftereffects/2013/09/troubleshooting-issues-with-downloading-and-in stalling-after-effects.html
    Issue: What are the system requirements for Premiere Pro CS6?See this article: http://helpx.adobe.com/premiere-pro/system-requirements.html#Adobe%20Premiere%20Pro%20CS6% 20system%20requirements
    Issue: Why won't Premiere Pro CS6 play back AVCHD media?Answer: Update to Premiere Pro CS6 (6.0.5). Previous versions of CS6 had this issue.
    More info: http://blogs.adobe.com/premierepro/2013/08/premiere-pro-cs6-6-0-4-update.html
    Issue: Does Premiere Pro CS6 work with OS X 10.9 (Mavericks)?Answer: Yes, make sure you update to Premiere Pro CS6 (6.0.5)
    More info: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
    Issue: Is there a trial available for Premiere Pro CS6?Answer: Yes, subscribe to the free version of Creative Cloud, then download the trial.
    Issue: I'm having unexpected behavior in Premiere Pro CS6 and want to trash preferences. How do I do that?Answer: See this blog post: http://blogs.adobe.com/genesisproject/2011/02/premiere-pro-cs5-maintenance-two-great-tips. html#more-537
    Issue: I'm getting errors related to QuickTime. What do I do?Answer: See this blog post for troubleshooting items related to QuickTime: http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
    Premiere Pro CS6 tutorials
    Issue: I'm new to Premiere Pro CS6. How do I get started?Answer: See this blog post: http://blogs.adobe.com/kevinmonahan/2011/05/20/getting-started-with-adobe-premiere-pro-cs4 -cs5-cs5-5/
    Issue: I'm switching to Premiere Pro CS6 from Final Cut Pro 7. Are there any tips for me?Answer: See this article by Scott Simmons on Pro Video Coalition: http://provideocoalition.com/ssimmons/story/105_adobe_premiere_pro_cs6_questions_answered
    Issue: I just switched to Premiere Pro CS6 from Final Cut Pro 7. Are there any missing features between the applications?Answer: See this article: http://provideocoalition.com/ssimmons/story/10_fcp_things_fcp_editors_might_be_missing_in_ adobe_premiere_pro_cs6
    Issue: Are there any good, free Premiere Pro CS6 tutorials available?Answer: See these tutorials: http://library.creativecow.net/series/Premiere-Pro-Basics-CS6--above-with-Andrew-Devis
    Issue: How do I optimize Premiere Pro CS6 for best performance?Answer: See this article: https://www.video2brain.com/en/courses/after-effects-premiere-pro-performance-workshop
    Issue: How do I operate the multicam function in Premiere Pro CS6?See this article: http://provideocoalition.com/ssimmons/story/working_with_multicam_in_adobe_premiere_pro_cs 6

    Hi ..
    GO to website www.Apache.org
    down load Apache tomcat server .
    install it ...
    Go to sun site
    c and download jsp tutorials ...
    Go to
    (www.coreservlets.com)download book core servlets
    u can find lots of nice books supported by sun on sunwebsite ...
    Now u r equipped ....
    start doing everything (R &D) on server ..
    Join This JSP forum and ask any thing u didnt got ..or learn or get confused..
    I thing once u go through this ..it will do all what u want
    Hope it helps
    Best of Luck :)
    regds & take care

  • "Missing signed entry in resource" for only some users

    Hi,
    I have recently updated my .jnlp file and .jar file and added some extra jar resources in the new jnlp.
    Since this new version, some users receive an error saying
    "Missing signed entry in resource:" for one particular resource.
    While for other users it works fine.
    I have signed the jar with jarsigner.
    Does anyone have an idea what could be the problem here?
    Thanks very much in advance,
    Best regards,
    Stein Aerts,
    University of Leuven, Belgium

    I remember hearing something like this, and had to do with :
    1.) what version of jarsigner was used to sign the jar, and
    2.) what version of JRE was used to validate the signed jar file on the client.
    (including US only vs. International version of JRE)
    For the jar that gets this error:
    Does it have any empty directories in it., or does it have entries with non-english characters in the resource names ?
    What version of the JDK was used to run jarsigner to sign this jar, and what jre is the application running on ?

  • " Server Error [2009]: Failed to allocate resources for results data" IR Error

    Hi,
    We recently moved form 9.3.3. to 11.1.2.3 and we run only IR and SQR reports. When we run few IR reports we get the below error.
    "Script(x):uncaught exception:  Server Error [2009]: Failed to allocate resources for results data."
    Any thought on what could be the cause. I changed the DSA setting, HTTP config settings for timeouts. I followed a oracle Knowledge base document to make sure I'm setting the right parameters still it doesn't work.
    Any advise will be appreciated.
    Thank you.

    Hi,
    Can you please try to increase the timeout settings for workspace and check the issue.
    You can refer following KM article for more information :
    Hyperion Interactive Reporting (IR) When Processing a BQY in Web Client and iHTML Error: "Server Error [2009] Failed To Allocate Resources To Results Data" [ID 1089121.1]
    To try in 11.1.2.x check these settings in workspace :
    Please go to Navigate -> Administer -> Reporting and Analysis -> Web Applications -> Right click on RA_FRAMEWORK_LWA and select Properties. A
    Window pops up. In that, go to Applications tab and then go to Data Access Servlet. There are two values there
    i) Hyperion Intelligence Client Polling Time(seconds) => Set this to zero
    ii) DAS Response Timeout => Set this to 3600
    Restart the R&A services and WebApp after this change.
    Hope this information helps.
    regards,
    Harish.

  • Define resource for Anonymous user in OES

    Hi all,,
    I am using wls-ssm.
    By default, OES protect all resources from our application.
    how to define some resources for anonymous user?
    With Regards,
    WP

    You can either define an OES policy to GRANT allusers group which includes anonymous or you can look at deploying this custom authenticator which will exclude WLS resources that typically rely on anonymous user:
    https://oes-sspi-providers.samplecode.oracle.com/

  • Multiple IT Resources for LDAP Server?

    All,
    I have a client with several Sun Java System Directory Server (SJSDS) instances, each containing separate user repositories. The schemas for each SJSDS instance have been customised - uid is not the user identifier attribute, nor is inetorgperson the user objectClass.
    I have imported the SJSDS connector and am stuck at how I can represent these multiple real-world SJSDS instances in OIM. I understand that I can create separate IT Resources for each SJSDS instance, complete with their individual hostnames and IP addresses; this makes sense. However, according to the "Extending the Functionality" guide (http://download.oracle.com/docs/cd/E11223_01/doc.904/e10446/custom.htm#CIHDDEGA), the user identifier attribute and objectClass seem to be defined at the connector level through the Lookup.iPlanet.Configuration Lookup Definition? Am I correct in therefore assuming that this means all of my LDAP Server IT Resources have to share the same user identifier attribute and objectClass?
    Can anyone suggest how I might be able to define unique settings for attributes such as the user identifier attribute and objectClass for each LDAP Server IT Resource? What is the standard approach?
    Also, I read that there is a one-to-one relationship between a process task and its adapter. Does this therefore mean that I should create separate "Create User" adapters for the Process Definition associated with each IT Resource implemented?
    Any guidance / clarification would be greatly appreciated :-)
    Damian

    See this is the underlying assumption for multiple instances creation in OIM for any target system:
    - Create multiple IT Resources of same IT Resource type. Each one will have individual connection parameters specified in it. You know that.
    - Now while provisioning, you just select anyone of this IT Resource as required, so your request is directed towards the required target.
    Note
    - It considers that you are always provisioning same attributes to all those targets because you will always see same process form for all targets.
    - You have same objectClass for all.
    - You have same 'Unique Attribute' and 'Key Fields' for reconciliation.
    - Although you can modify the IT Resource for providing different attribute list for prov and recon based on your target system by providing different values for look up's in place of- AttrName.Prov.Map.iPlanet and AttrName.Recon.Map.iPlanet. But since RO, Process Form etc all are same so no such real usage.
    Note - Lookup - 'AttrName.Prov.Map.iPlanet' has got one attribute objectclass. See if modifying it works. But in OIM process form, attributes will always be same
    Work-Around if above doesn't work
    The only thing you can do is replicate one instance of SJSDS multiple times within OIM for every OIM object. Say if you want 5 different instances of SJSDS then like following:
    - Create 5 identical RO, Process Form, rules, Process Definition, Lookup's etc within xml for every OIM object that you thing will change for all these 5 instances. If anything is common then let all the 5 refer to it. Do it by copying + renaming xml.
    - Now import everything in OIM. So now you can see 5 different RO like SJSDS1, SJSDS2 ,SJSDS3 .. etc for all these 5 instances and they will behave differently with no overlapping and you can configure these individually.
    - But this is very critical procedure. You need to take proper care while replicating.
    Hope it helps.
    Thanks
    Sunny
    Edited by: rajsunny

  • "Insufficient resources for this video mode" error in IMAQ for IEEE-1394 1.1

    I'm using 3 Sony DFW-X700 cameras (1024x768 YUV 4:2:2) and 1 Sony XCD-X700 (1024x768 8-bit mono) connected to 2 IEEE-1394 adapter cards (3 ports each). I'm running LV 6.1 on WinXP Pro PT.
    I've tried several acquisition modes, and the only one that works fine is 'continuous acquisition', using 1 buffer per camera. The problem is that I can only setup 2 color cameras and 1 mono camera. If I try to setup 3 color cameras, I get an 'insufficient resources for this video mode' error. I would like to know if it's possible to configure more memory for the acquisition buffers under IEEE-1394 so that I can avoid this error.

    Habil,
    You might want to try to lower the frame rate of the cameras. This error is caused because the driver is able to allocate only part of the firewire bandwidth for your image acquisition, and a three camera color acquisition requires a huge amount of bandwidth. This is currently an issue that our R&D department worked this period and is going to be resolved in the next release of the driver. This release should be ready in one month. Good luck!
    Nestor.
    Nestor
    National Instruments

  • Good resource for HTML + JS mobile development

    Hello,
      It seems that while Adobe AIR is focusing strongly on mobile now, the resources for delveloping for it almost only limited to Flex. I've already spent a lot of time coding in HTML, CSS3 and I'm not intended to switch to Flash, Flex. My question is, that anybody aware of any good tutorial on HTML based mobile development with AIR?
    It should be the same as a desktop app, because AIR's philosophy is write once, use anywhere, but there must be some issues that we sould be aware of.
    Thanks,
    Tibor

    I don't work for Adobe, so I don't know their reasons. This is just what they have public communicated about the AIR for mobile solution. I think some of the choices about AIR were about time to market, and the number of users. Heck, there are people upset that it doesn't support ActionScript 2.
    Actually, Adobe seems quite committed to the web standard solution tools as well. They are hiring jQuery experts and are committing improvements back into the jQuery framework. I expect to see some real mobile based enhancements in Dreamweaver to support developers who want to build mobile web apps. To that end I think PhoneGap and jQuery are going to be your best friends for your development tool chest.
    AIR does have a StageWebView, you could just create an instance of that and attempt to build you app in it, but I personally would recommend PhoneGap
    Hope this clears up any questions,
    Chris

  • "Could not get needed resources for application to be launched (id=-669)"

    I keep getting this message
    Setup Resourses Status
    Could not get needed resources for application [App name. edir path] to
    be launched (id=-669).
    Problem: Unable to connect to server [server name]
    I am able to browse to the server no problem as well as map a drive
    directly to it?
    I am not sure why I am getting this ?

    This is under the "Environment" portion of the "Run Tab"
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Support Forums Volunteer Sysop
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared either Novell or any rational human.
    <[email protected]> wrote in message
    news:[email protected]...
    > Craig where do I to determine that? I know it has to run as admin but I
    > am not sure if it is set like that...
    >
    >> Is the application configured to run "Normal", "Secure System User", or
    >> "Unsecure System User".
    >>
    >> Methods #2 and #3 require the workstation not the user to have rights
    > and
    >> require the use of UNC instead of a mapped drive.
    >>
    >> --
    >> Craig Wilson - MCNE, MCSE, CCNA
    >> Novell Support Forums Volunteer Sysop
    >>
    >> Novell does not officially monitor these forums.
    >>
    >> Suggestions/Opinions/Statements made by me are solely my own.
    >> These thoughts may not be shared either Novell or any rational human.
    >>
    >> <[email protected]> wrote in message
    >> news:[email protected]...
    >> > It is associated with the user and I can get access to the exe via
    > their
    >> > PC using their login
    >> >
    >> >> ,
    >> >> > Could not get needed resources for application [App name. edir
    > path]
    >> > to
    >> >> > be launched (id=-669).
    >> >> >
    >> >> > Problem: Unable to connect to server [server name]
    >> >> >
    >> >> > I am able to browse to the server no problem as well as map a drive
    >> >> > directly to it?
    >> >> >
    >> >> -669 is "wrong password" IIRC. Is this app associated to user or WS,
    > ie
    >> > is
    >> >> t trying to access that path wth the User's or Workstation's
    >> > credentials?
    >> >>
    >> >> - Anders Gustafsson, Engineer, CNE6, ASE
    >> >> NSC Volunteer Sysop
    >> >> Pedago, The Aaland Islands (N60 E20)
    >> >>
    >> >> Novell does not monitor these forums officially.
    >> >> Enhancement requests for all Novell products may be made at
    >> >> http://support.novell.com/enhancement
    >> >>
    >> >> Using VA 5.51 build 315 on Windows 2000 build 2600
    >> >>
    >> >
    >>
    >>
    >

Maybe you are looking for

  • How to Change Fiscal year in Consolidation

    HI all, How to change Fiscal year in consolidation...iam posting the documents.... not showing any valuues in consolidation report only shwoing documents nos only  ... bcoz its whoing 2007 fiscal year.... regards JK

  • What is the keyboard shortcut for the search window?

    Is there a keyboard shortcut that takes me directly to the Google search window in the upper right hand corner of the Safari toolbar? I looking for the equivalent of Firefox's Cmd-K shortcut. I've looked at lists of Safari shortcuts online, but I can

  • Wireless Keyboard Low Battery Indicator

    I just purchased a new HP Touchsmart 300-1017 PC.  I got the "Low Battery Indicator" message for the wireless keyboard after taking it out of the box so I put new batteries in.   Now, two weeks later, I got the same message.  How long should the batt

  • Hard Drive Space/HD-PVR

    Alright i have a important question to ask... I have a very old laptop, and Dell Latitude e-6400 i think, but the point is they dont make them anymore! I am buying a HD-PVR (Personal Video Recorder). It HAS to be on a fast running, good system and th

  • Can't Define Epson R2400 Printer, Error -9672

    I had happily been using my Epson Stylus Photo R2400 (firewire connection) on my G4 PowerBook ever since we purchased it four or five months ago. Then, suddenly, it stopped printing. Eventually, I deleted the printer definition and found that I could