Resource Management tab: Net Availability

HI,
xRPM: Under resource management: we can see the resources and their net availablity.
Can anybody guide me: where these net availablity get stored..? (any table:where i can find the net availbility)
our client want these data as a report on excel sheet or in BI reports.
Thanks,
Regards,
Nitin Bhagat

Hi Nitin,
Actually the net availibility is not stored, it's calculated based on the total availibility and the staffed hours.
Staffing data is in: DPR_BUPA_DIST
BR
Matthias

Similar Messages

  • XRPM Resource Management issue

    Gurus,
    In xRPM under Resource Management Tab. I am not able to find any resources under resource view.TAble is empty.
    Although I have created Resource pool and assinged a resources to administrator.
    Please let me know if i am missing any settings
    Thanks in advance.

    Hello Riya,
    Here are the steps to assign the Resource Manager to a Resource Pool:
    1) Create a Resource Pool
    2) Add resources based on the selection criteria.
    3) Add a Resource (BP in employee Role) as Resource Manager to this Resource Pool.
    NOTE: this resource manager should be attached to your User.
    to see which User this Resource Manager is attached to, go to Portfolio Management -> Administration -> Resources
    find the resource with its Name or Resource ID (BP) and Display. you will see the linked user. If it is not linked to any user you can assign the user to this resource manager.
    4) when you login with this Resource Manager's User, and navigate to Resource Management -> Resources, you will see all the resources under the Resource Pool where this current user is Resource Manager.
    Hope this will help.
    Thanks and Regards,
    Piyusha

  • Resource Manager in Cloud Control 12c still available?

    Hi ,
    is the Resource Manager in Cloud Control 12c still available? The Resource Manager could be found in Grid Control 10g under the tab Database -> Administration.
    Rgds
    JH

    Yes, in EM 12c you can navigate to the "Getting Started with Database Resource Manager" page by selecting Resource Manager from the Administration drop-down list in a database homepage. I believe, in EM 10g the Resource Manager link is in the Server tab.
    Regards,
    - Loc

  • Party Resource selected from the Assignment Manager is not available on SR

    Party Resource selected from the Assignment Manager is not available on Service Request.
    Hi,
    Im working on Oracle Customer Support and observed the following.
    I imported a party (dealer) from AR and created it as a resource.
    Then created a Service Request, assigned Tasks to the service request and then tried to assign the task to the imported resource using Assignment Manager.
    In the assignment manager searched for the resources using Unassisted search. In the resource type selected 'Party Resource'. Found the party resources by clicking on the search button.
    Double clicked on the party resource and specified the Start Time and End Time.
    After clicking on the Ok button, the selected party resource is not available in the Service Request Form.
    Can somebody please help me in this matter. I want the party resource on the service request form.
    Thanks in advance.
    Regards
    Anil

    Shiv,
    Thank you for your reply. I don't have access to the production instance..but I will definitely recommend the solution. I did these steps in test instances earlier whenever I had this error. But they used to go away after bouncing app server.
    Now, some of the functions are available to the responsibility without any modifications..seems like it takes a while for the newly added functions to a menu to propagate in the E-Business system.
    What confounds me is that even after a mid-tier bounce, the system didn't pickup the menu changes.
    Regards,
    Arun

  • Available tasks not displaying under Manage Tab in Portal.

    Hi,
    I have configured the custom web enabled tasks for creating business role and changing the user data.
    When I log into portal and select the person from manage tab, and try to choose the task, I am not able to view the tasks created under custom web enabled tasks folder.
    Could you please help me.
    Regards,
    Giridhar

    >
    Chennai SAP HELPDESK wrote:
    > On-behalf of=user, Value=All Users(self service).
    I think there is your problem: If you set on behalf of "self service" the task will show under the Self-Service tab. Try something like on behalf of "everybody" or some kind of filter etc.
    Regards

  • Resource Assignment without Project Resource Management Module

    Hi Dina,
    We are implementing Oracle projects for one of our customers. The customer does not want to implement Project Resource Management module. Is it possible to assign resources to a project or create a new requirement using the Resources tab in Project screen (HTML page) without implementing the Project Resource Management module. Pls let us know.
    Regards,
    Sri
    Edited by: user12209290 on Nov 18, 2011 9:30 AM

    Hi
    With Project Management you can assign resources to the work plan. Resources might be named people or generic resource by job.
    You can track planned hours by resource versus actual time worked, You can look at roll-up of planned hours across multiple projects for the same resource, or summarization of planned and actual hours using the RBS.
    However, you will not get the functionality of demand published to resource managers, and the search functionality for available person to join the requiring project.
    Dina

  • Unable to find the master data loaded request in manage tab

    Hi All,
    Iam unable to see the loaded request in the master data manage tab after some time of loading.
    Immediately after loading i could see the request.If i revisit the manage tab,iam unable to see the request.
    However data is available for the info object .
    Can anyone please suggest on this.
    Regards,
    Kavya

    hi Devupalli,
    Note your request number, find it using RSRQ tcode. Now click on the target icon and see if it takes you to the manage of your infoobject.
    There is a very common error which we sometimes make: are u sure you're checking the right thing? please check that if your infoobject has text, attribute and hierarchy, you're checking in the manage of the relevant one.
    For ex, if you're loading text, you have to go to manage of the text.
    Hope this helps!
    Sheen

  • How to configure ex90 for use with polycom resource manager GAB

    My customer has a Polycom infrastructure, including using Resource Manager for the GAB server. I also have several Cisco endpoints deployed (EX90 and C40) and I need to get these units configured to use the GAB. Polycom documentation sucks and only says:
    1. At the endpoint, enter the information required for directory set up including the Polycom Global Address Book/RealPresence Resource Manager system IP address and the path.
    For example, http://<RPRM_IP_ADDRESS>/TMS/Public/external/phonebook/PhoneBookService.asmx.
    To do this on Cisco endpoints, go to System Configuration> Phone Book Server.
    2. Wait for the connections to take effect
    When I go to the EX90 phone book server setup page, I only have ID, Type and URL fields. The type field has a drop down that only has Cisco options available (VCS, TMS, Callway and CUCM)
    No matter what combination I use, I haven't been able to get the EX90 to pickup the Polycom directory.
    Any suggestions? Thanks

    What happens when you try that URL (http://<RPRM_IP_ADDRESS>/TMS/Public/external/phonebook/PhoneBookService.asmx) from a Web Browser - do you see anything, or get an error?
    You'll need to make sure that's accessible first before trying to configure your endpoints to use it.

  • Resource Management of Shared Resource Pool at the Project Level

    I am having difficulty figuring out how to implement our resource management process. Currently we have one "Resource Pool" project that has all the shared resources. It is connected to both a "master portfolio" plan that has some task
    detail in it and other individual project plans that have their own WBS (for larger projects).
    The difficulty arises because we want to do resource allocation at a project level, but the resource usage view shows the WBS/task level detail.  I've tried grouping the resources assignments by resource and then project, but since everything is
    in the "Resource Pool" project, they all group under that project.  I've tried adding the "Project" field and it does show as the source project, but it doesn't group on that field, but rather the "Resource Pool" project
    only.
    How can I see resource allocation/usage at just the project level so our managers can do planning, negotiation, and re-allocation on a periodic basis with one simple view?
    My best current idea is to disconnect all the sub-tasks from the sharer, eliminate the WBS below the project level in the master plan and attach resources at that single line project in that master plan.  Then, we would have to manually alter the "Max"
    available time in the individual sub-plans as we altered allocations.  That essentially disconnects individual plans from both the master plan and the shared resource pool.
    Is there a better way?

    Mark,
    Yeah, I think there is a better way. Having a linked structure the contains both a pool file and a dynamic master is tenuous enough (i.e. prone to corruption), but if you start disconnecting from the pool and and messing with the master, you will most certainly
    invite trouble.
    But here is an approach that might work. I tested it on a sample pool file with two sharer files and I think it might give you what you want.
    1. First, either manually copy or use VBA to copy the contents of the Project field to a custom text field in each sharer file
    2. In the pool file display the Resource Usage view
    3. Create a group that first groups on the Resource Name and then on the Text1 field, and select "group assignments, not resource"
    4. Change the Text1 group field to be "assignment"
    Does that give you what you want?
    To help visualize, here is a screenshot of my test file. After grouping I applied a filter to Text1 with the option to also show summary tasks:
    John

  • RH8 hangs with 100% CPU when closing a topic. Resource Manager to blame?

    Please refer to the following thread for background information: http://forums.adobe.com/thread/734972?tstart=0
    I'm re-listing this issue, as it has rasied its ugly head again, and I've no resolution this time.
    Summary:
    The original issue was that RH8 would hang whenever I closed a topic for anywhere between 15-30 seconds before allowing me to interact with the application again. Attempting to interact with the GUI during this freeze would result in the 'Not Responding' message at the upper-left of the application window (suffice it to say I'm on a PC with Windows).
    After much investigation it was suggested to me that my profile may be corrupt, and in order to test this, another user should log on and see whether they experienced the same problem. As it is, they did not. So I had my Systems Admin recreate my domain profile, and everything worked just fine.
    ...until now.
    Last week we all upgraded from Windows XP to Windows 7 (32 bit). We also changed our anti-virus software. The awful hanging issue in RH has returned.
    We've attempted the solution from last time, by recreating my profile on the domain, to no avail. We have in fact gone to the extent of reformatting the hard drive and reinstalling Windows, the anti-virus software and RH8 (plus all available patches) from scratch. In case anyone is wondering, we've tried running RH without the antivirus installed, and when installed have also tried excluding the RH application folder and all my project folders, just in case it was the anti-virus software at fault. Regardless, the RH problem exists.
    I can't understand why I'm now having this problem. Truth be told, I never really understood why recreating my domain profile in the first place resolved the problem last time.
    However, I have now discovered something else...
    In my RH Resource Manager I have a few thousand images in the Image folder. Not much I can do about this - the applications I write Help for have many screens users can access, and I write the Help for half a dozen applications. When I delete the contents of the images folder within the Resources Manager, RH works perfectly - no hanging whatsoever. As soon as I import the images into this folder again, the hanging is back. I have tested this a few times now, and have rebooted and had another user log on to confirm, and it happens every time. I'm dumbfounded of course, particularly because the same set of images has been sitting in the Resource Manager for months (since my original post about this issue, last year), and RH has been working perfectly.
    I've also tried Peter Grainge's suggestion to create an empty BaseCSS_res.dll file (http://www.grainge.org/pages/authoring/rh8/using_rh8.htm), but as I've installed all the RH8 updates, this shouldn't be an issue.
    I've also tried deleting the CPD file without success.
    Thanks in advance.

    It seems this has been resolved!
    Many thanks for all the suggestions. Peter ultimately forwarded the solution - something that he'd sourced from a rep at Adobe, as follows:
    Every file/folder change in the root folder of RH8 Resource Manager triggers a rescan of all the sub-folder/files. That is why in case of thousand image it will take time. Like xxxx said we may ask user for root folder, it should not be project folder or frequently changing folder.
    Probably he is using the default path given in the root folder and RoboHelp changes a temporary css file in that folder very frequently, in fact with every topic close.
    That is causing the slowness and it should be easy to reproduce in the default scenario. This is RH8 only issue.
    So, to fix my issue:
    Open the Resource Manager Pod.
    Click the Add/Edit Categories icon. The Add/Edit Categories window appears.
    Within this window, change the 'Root Folder' path to something other than the default. In my case, I create a new folder on my root hard drive, outside of the Robohelp folder, just to be sure.
    So far this is working perfectly - no 'hanging'. I'll keep an eye on it.
    I love the comment "This is RH8 only issue."
    Oh?! Is it? Was it fixed in a patch, Adobe? Please don't tell me that it was fixed in RH9, because there's no way known I should have to pay for an upgrade to resolve something that certainly looks like a bug. As happy and grateful I am to have this resolved, it has cost me a week's work.

  • Project Online Resource Management

    We will be using project online for Resource Management - managing the workload on many machines - and do this function across the team collaboratively.
    I was wondering how resources are managed in Project online. After loading tasks on my resources/machines , I need to be able to see/view how much workload is distributed on these resources/machines and if I can assign a pending task to the resource or shuffle
    the work around.
    I would like to use 2 project pro and 2 project lite licenses to manage resources/machines.

    msayani2 --
    Firstly, all of your people and machines need to b entered in the Enterprise Resource Pool.  For each of the machines you list, enter a Max. Units value that represents 100% multiplied by the number of machines you have.  For example, if you have
    three road graders, you would enter 300% in the Max. Units column for a Road Grader resource.
    Next, you will need to build enterprise projects, add the required people and machines as team members in the project, assign the resources to each task as needed, and then save and publish each enterprise project.
    To see how the workload is distributed for your resources, navigate to the Resource Center page and select the resources whose assignments and availability you want to study.  At the right end of the Resources ribbon, click the Resource Availability
    button.  On the Resource Availability, select the time range you want to use and you can then see the availability of your selected resources.  You can also click the Resource Assignments button to study how the resources are being used on tasks
    across all projects in Project Server.
    Hope this helps.
    Dale A. Howard [MVP]

  • Resource manager and images being rewritten in the project root

    Hi everybody,
    I began using the Resource Manager, and I created two folders, one with HTML files (topics), and another one with pictures present in those topics.
    As I transferred the topics to the HTML shared folder the pictures references remained the old ones, i.e. the ones inside the project folder, right?
    Therefore I began reassigning the pictures to the ones copied in the pictures shared folder, and here begins to be a little bit illogical and difficult.
    I deleted the pictures from the original project folder as I want to save the space and have, of course, the pictures only in the shared folder, however after I reassign the pictures to one of the topics, and I sync it, the pictures I deleted appear in the root folder of the project.
    I wanted to have the "common" pictures (they appear in 2 different projects) only in the shared folder (declared as pictures folder in Resource Manager) because if I do a modification of one picture, I would like to have this modification propagated in the second project, right?
    And also save some space, as it does not make any sense to me to have the same pictures in 2 places (double space consumed) when I can have them in only one folder.
    I would like to know how I can avoid this recopying of the picture files in my project folder, if possible.
    The procedure I used was:
    1. Found out which are the common topics for the 2 projects and copied them in the Resource Manager shared folder for HTML files.
    2. Found out which pictures were on those topics and copied them in the Resource Manger shared folder for pictures
    3. I included the shared topics into the project, and reassigned the pictures to the ones that are in the Resource Manager shared pictures folder
    4. I saved the topic, and did a sync in the Resource Manger
    Did I do something wrong here?
    Thank you.

    The repository has all the images you may want to use in any of your projects or elsewhere.
    Each time you link in a project, that image only is copied to the project, not the whole repository. If either copy changes, you are notified. You then have the choice of updating the out of date copy or breaking the link because for some reason you now want the difference.
    Your statement "I saw that if I use an external directory to the actual project where I have pictures, RoboHelp will copy those into the project's folder" is not correct. The Resource pod will show all the images available in the repository but only the ones in used in the project are copied locally.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • The requested resource /MobileOTA14/ is not available

    Hi,
    I am trying to deploy the mobile 4.0 client package MobileOTA14.war file on tomcat6/Windows. I have used the following command to deploy the file. The command executes successfully. The I have restarted the web server.
    wdeploy.bat tomcat6 -Dwar_dir="C:\Program Files (x86)\SAP BusinessObjects\Mobile 14\Client" -DAPP=MobileOTA14 deploy
    But when I execute the url " http://hostname:8080/MobileOTA14, I get an error "The requested resource /MobileOTA14/ is not available"
    I see the /MobileOTA14/ is deployed on the tomcat through Tomcat Manager webpage.
    Can anybody advise what was the problem?
    Thanks,
    Kris

    I couldn't get you
    I think we need to download Mobile application (Symbian/Blackberry/Windows) using the link " http://hostname:8080/MobileOTA14" on the Mobile.
    But I am getting "The requested resource /MobileOTA14/ is not available" when I executed in the browser
    Thanks,
    Kris

  • MQSeries as a Transactional Resource Manager with Weblogic Server

              I am trying to setup the example given in the BEA white paper:
              Using MQSeries as a Transactional Resource Manager with Weblogic Server.
              Version 1.
              October 25, 2001.
              I followed the instructions given in the documents, but when i run client program
              >java MQClient t3://localhost:7001 "MQSeries test"
              I received the following exception below. Does anyone how what is the reason for
              this exception(s) and how i can solve the problem? My MQSeries Server and Weblogic
              6.1 sp2 are installed on seperate NT machines. I installed the MQSeries classes
              for java and the MQSeries classes for Java Message Service on the weblogic
              server machine.
              sending: "MQSEries test"
              Exception in thread "main" java.rmi.ServerError: A error occurred the server; ne
              sted exception is:
              java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              Start server side stack trace:
              java.rmi.ServerError: A error occurred the server; nested exception is:
              java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
              at java.lang.Runtime.loadLibrary0(Runtime.java:749)
              at java.lang.System.loadLibrary(System.java:820)
              at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
              at java.security.AccessController.doPrivileged(Native Method)
              at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
              at com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
              at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
              at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
              149)
              at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
              tion(MQBindingsManagedConnectionFactoryJ11.java:139)
              at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
              ion(MQBindingsManagedConnectionFactoryJ11.java:157)
              at com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
              a:80)
              at com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
              ctionManager.java:150)
              at com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
              a:666)
              at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
              at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
              at com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
              at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
              at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
              at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
              at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
              at com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
              at com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
              AQueueConnectionFactory.java:53)
              at weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
              QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
              at MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
              at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
              at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
              at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
              at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
              a:267)
              at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
              .java:22)
              at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
              at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              End server side stack trace
              ; nested exception is:
              java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              Start server side stack trace:
              java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
              at java.lang.Runtime.loadLibrary0(Runtime.java:749)
              at java.lang.System.loadLibrary(System.java:820)
              at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
              at java.security.AccessController.doPrivileged(Native Method)
              at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
              at com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
              at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
              at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
              149)
              at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
              tion(MQBindingsManagedConnectionFactoryJ11.java:139)
              at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
              ion(MQBindingsManagedConnectionFactoryJ11.java:157)
              at com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
              a:80)
              at com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
              ctionManager.java:150)
              at com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
              a:666)
              at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
              at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
              at com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
              at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
              at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
              at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
              at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
              at com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
              at com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
              AQueueConnectionFactory.java:53)
              at weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
              QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
              at MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
              at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
              at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
              at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
              at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
              a:267)
              at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
              .java:22)
              at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
              at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              End server side stack trace
              java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              Start server side stack trace:
              java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
              at java.lang.Runtime.loadLibrary0(Runtime.java:749)
              at java.lang.System.loadLibrary(System.java:820)
              at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
              at java.security.AccessController.doPrivileged(Native Method)
              at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
              at com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
              at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
              at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
              149)
              at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
              tion(MQBindingsManagedConnectionFactoryJ11.java:139)
              at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
              ion(MQBindingsManagedConnectionFactoryJ11.java:157)
              at com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
              a:80)
              at com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
              ctionManager.java:150)
              at com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
              a:666)
              at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
              at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
              at com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
              at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
              at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
              at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
              at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
              at com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
              at com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
              AQueueConnectionFactory.java:53)
              at weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
              QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
              at MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
              at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
              at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
              at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
              at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
              a:267)
              at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
              .java:22)
              at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
              at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              End server side stack trace
              <<no stack trace available>>
              --------------- nested within: ------------------
              weblogic.rmi.extensions.RemoteRuntimeException - with nested exception:
              [java.rmi.ServerError: A error occurred the server; nested exception is:
                      java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              Start server side stack trace:
              java.rmi.ServerError: A error occurred the server; nested exception is:
                      java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
                      at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
                      at java.lang.Runtime.loadLibrary0(Runtime.java:749)
                      at java.lang.System.loadLibrary(System.java:820)
                      at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
                      at java.security.AccessController.doPrivileged(Native Method)
                      at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
                      at com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
                      at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
                      at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
              149)
                      at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
              tion(MQBindingsManagedConnectionFactoryJ11.java:139)
                      at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
              ion(MQBindingsManagedConnectionFactoryJ11.java:157)
                      at com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
              a:80)
                      at com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
              ctionManager.java:150)
                      at com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
              a:666)
                      at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
                      at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
                      at com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
                      at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
                      at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
                      at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
                      at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
                      at com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
                      at com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
              AQueueConnectionFactory.java:53)
                      at weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
              QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
                      at MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
                      at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
                      at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
                      at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
                      at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
              a:267)
                      at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
              .java:22)
                      at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
                      at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              End  server side stack trace
              ; nested exception is:
                      java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              Start server side stack trace:
              java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
                      at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
                      at java.lang.Runtime.loadLibrary0(Runtime.java:749)
                      at java.lang.System.loadLibrary(System.java:820)
                      at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
                      at java.security.AccessController.doPrivileged(Native Method)
                      at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
                      at com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
                      at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
                      at com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
              149)
                      at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
              tion(MQBindingsManagedConnectionFactoryJ11.java:139)
                      at com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
              ion(MQBindingsManagedConnectionFactoryJ11.java:157)
                      at com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
              a:80)
                      at com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
              ctionManager.java:150)
                      at com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
              a:666)
                      at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
                      at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
                      at com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
                      at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
                      at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
                      at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
                      at com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
                      at com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
                      at com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
              AQueueConnectionFactory.java:53)
                      at weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
              QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
                      at MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
                      at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
                      at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
                      at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
                      at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
              a:267)
                      at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
              .java:22)
                      at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
                      at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              End  server side stack trace
              at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:60)
              at $Proxy1.bridgeWLS2MQS(Unknown Source)
              at MQClient.main(MQClient.java:54)
              

    The point is that over TCPIP the MQ XA connection factory is not available.
              The MQ shared memory/JNI driver is required to access it, which limits
              access to those processes that are on the same box as the MQ q manager.
              This is an MQ series limitation.
              Douglas WF Acheson wrote:
              > Hello,
              >
              > If memory server me correct, default connection to MQ Series is through
              > JNI calls and shared memory. You have to change the protocol to TCPIP when
              > connection to the queue manager on another box (do not know much about XA
              > with MQ Series); that is when you connect to MQ Series vi JMS on another
              > box you must do something like the following:
              >
              > qcf = new MQQueueConnectionFactory() ;
              > qcf.setHostName(hostName) ;
              > qcf.setPort(port) ;
              > qcf.setTransportType(JMSC.MQJMS_TP_CLIENT_MQ_TCPIP) ;
              > qcf.setQueueManager(qManagerName) ;
              >
              > Then when you create you queues, sesions etc. you are point at the correct Q
              > manager.
              >
              > Hope this helps ...
              >
              > Douglas WF Acheson
              >
              > "Raja Mukherjee" <[email protected]> wrote in message
              > news:[email protected]...
              > > On a closer look at the original post (sorry for missing that, it was
              > early
              > > in the morning), you would not be able to use XA if your QM and WLS are in
              > > different boxes. Check on this newsgroup, there are several posts on this
              > > subject. The whitepaper, if I recall correctly, installs both MQ and WLS
              > on
              > > the sames box. This is a MQSeries limitation not WLS.
              > >
              > > .raja
              > >
              > >
              > > "ibrahim Nehme" <[email protected]> wrote in message
              > > news:[email protected]...
              > > >
              > > > I am trying to setup the example given in the BEA white paper:
              > > > Using MQSeries as a Transactional Resource Manager with Weblogic Server.
              > > > Version 1.
              > > > October 25, 2001.
              > > > I followed the instructions given in the documents, but when i run
              > client
              > > program
              > > >
              > > > >java MQClient t3://localhost:7001 "MQSeries test"
              > > > I received the following exception below. Does anyone how what is the
              > > reason for
              > > >
              > > > this exception(s) and how i can solve the problem? My MQSeries Server
              > and
              > > Weblogic
              > > > 6.1 sp2 are installed on seperate NT machines. I installed the MQSeries
              > > classes
              > > > for java and the MQSeries classes for Java Message Service on the
              > weblogic
              > > > server machine.
              > > > ---------------------------------------
              > > > sending: "MQSEries test"
              > > > Exception in thread "main" java.rmi.ServerError: A error occurred the
              > > server; ne
              > > > sted exception is:
              > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              > > >
              > > > Start server side stack trace:
              > > > java.rmi.ServerError: A error occurred the server; nested exception is:
              > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              > > > at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
              > > > at java.lang.Runtime.loadLibrary0(Runtime.java:749)
              > > > at java.lang.System.loadLibrary(System.java:820)
              > > > at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
              > > > at java.security.AccessController.doPrivileged(Native Method)
              > > > at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
              > > > at
              > > com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
              > > > at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
              > > > at
              > > com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
              > > > 149)
              > > > at
              > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
              > > > tion(MQBindingsManagedConnectionFactoryJ11.java:139)
              > > > at
              > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
              > > > ion(MQBindingsManagedConnectionFactoryJ11.java:157)
              > > > at
              > > com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
              > > > a:80)
              > > > at
              > > com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
              > > > ctionManager.java:150)
              > > > at
              > > com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
              > > > a:666)
              > > > at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
              > > > at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
              > > > at
              > com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
              > > > at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
              > > > at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
              > > > at
              > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
              > > > at
              > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
              > > > at
              > > com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
              > > > )
              > > > at
              > > com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
              > > > AQueueConnectionFactory.java:53)
              > > > at
              > > weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
              > > > QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
              > > > at
              > > MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
              > > > at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
              > > > at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
              > > > at
              > > weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
              > > > at
              > > weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
              > > > a:267)
              > > > at
              > > weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
              > > > java:22)
              > > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
              > > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              > > > End server side stack trace
              > > > ; nested exception is:
              > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              > > >
              > > > Start server side stack trace:
              > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              > > > at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
              > > > at java.lang.Runtime.loadLibrary0(Runtime.java:749)
              > > > at java.lang.System.loadLibrary(System.java:820)
              > > > at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
              > > > at java.security.AccessController.doPrivileged(Native Method)
              > > > at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
              > > > at
              > > com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
              > > > at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
              > > > at
              > > com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
              > > > 149)
              > > > at
              > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
              > > > tion(MQBindingsManagedConnectionFactoryJ11.java:139)
              > > > at
              > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
              > > > ion(MQBindingsManagedConnectionFactoryJ11.java:157)
              > > > at
              > > com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
              > > > a:80)
              > > > at
              > > com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
              > > > ctionManager.java:150)
              > > > at
              > > com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
              > > > a:666)
              > > > at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
              > > > at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
              > > > at
              > com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
              > > > at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
              > > > at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
              > > > at
              > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
              > > > at
              > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
              > > > at
              > > com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
              > > > )
              > > > at
              > > com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
              > > > AQueueConnectionFactory.java:53)
              > > > at
              > > weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
              > > > QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
              > > > at
              > > MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
              > > > at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
              > > > at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
              > > > at
              > > weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
              > > > at
              > > weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
              > > > a:267)
              > > > at
              > > weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
              > > > java:22)
              > > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
              > > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              > > > End server side stack trace
              > > >
              > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              > > >
              > > > Start server side stack trace:
              > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              > > > at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
              > > > at java.lang.Runtime.loadLibrary0(Runtime.java:749)
              > > > at java.lang.System.loadLibrary(System.java:820)
              > > > at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
              > > > at java.security.AccessController.doPrivileged(Native Method)
              > > > at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
              > > > at
              > > com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
              > > > at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
              > > > at
              > > com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
              > > > 149)
              > > > at
              > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
              > > > tion(MQBindingsManagedConnectionFactoryJ11.java:139)
              > > > at
              > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
              > > > ion(MQBindingsManagedConnectionFactoryJ11.java:157)
              > > > at
              > > com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
              > > > a:80)
              > > > at
              > > com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
              > > > ctionManager.java:150)
              > > > at
              > > com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
              > > > a:666)
              > > > at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
              > > > at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
              > > > at
              > com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
              > > > at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
              > > > at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
              > > > at
              > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
              > > > at
              > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
              > > > at
              > > com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
              > > > )
              > > > at
              > > com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
              > > > AQueueConnectionFactory.java:53)
              > > > at
              > > weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
              > > > QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
              > > > at
              > > MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
              > > > at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
              > > > at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
              > > > at
              > > weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
              > > > at
              > > weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
              > > > a:267)
              > > > at
              > > weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
              > > > java:22)
              > > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
              > > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              > > > End server side stack trace
              > > >
              > > > <<no stack trace available>>
              > > > --------------- nested within: ------------------
              > > > weblogic.rmi.extensions.RemoteRuntimeException - with nested exception:
              > > > [java.rmi.ServerError: A error occurred the server; nested exception is:
              > > >         java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              > > >
              > > > Start server side stack trace:
              > > > java.rmi.ServerError: A error occurred the server; nested exception is:
              > > >         java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              > > >         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
              > > >         at java.lang.Runtime.loadLibrary0(Runtime.java:749)
              > > >         at java.lang.System.loadLibrary(System.java:820)
              > > >         at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
              > > >         at java.security.AccessController.doPrivileged(Native Method)
              > > >         at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
              > > >         at
              > > com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
              > > >         at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
              > > >         at
              > > com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
              > > > 149)
              > > >         at
              > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
              > > > tion(MQBindingsManagedConnectionFactoryJ11.java:139)
              > > >         at
              > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
              > > > ion(MQBindingsManagedConnectionFactoryJ11.java:157)
              > > >         at
              > > com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
              > > > a:80)
              > > >         at
              > > com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
              > > > ctionManager.java:150)
              > > >         at
              > > com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
              > > > a:666)
              > > >         at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
              > > >         at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
              > > >         at
              > com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
              > > >         at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
              > > >         at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
              > > >         at
              > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
              > > >         at
              > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
              > > >         at
              > > com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
              > > > )
              > > >         at
              > > com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
              > > > AQueueConnectionFactory.java:53)
              > > >         at
              > > weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
              > > > QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
              > > >         at
              > > MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
              > > >         at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
              > > >         at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
              > > >         at
              > > weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
              > > >         at
              > > weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
              > > > a:267)
              > > >         at
              > > weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
              > > > java:22)
              > > >         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
              > > >         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              > > > End  server side stack trace
              > > > ; nested exception is:
              > > >         java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              > > >
              > > > Start server side stack trace:
              > > > java.lang.UnsatisfiedLinkError: no mqjbnd04 in java.library.path
              > > >         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
              > > >         at java.lang.Runtime.loadLibrary0(Runtime.java:749)
              > > >         at java.lang.System.loadLibrary(System.java:820)
              > > >         at com.ibm.mq.server.MQSESSION$1.run(MQSESSION.java:179)
              > > >         at java.security.AccessController.doPrivileged(Native Method)
              > > >         at com.ibm.mq.server.MQSESSION.<clinit>(MQSESSION.java:175)
              > > >         at
              > > com.ibm.mq.MQSESSIONServer.getMQSESSION(MQSESSIONServer.java:67)
              > > >         at com.ibm.mq.MQSESSION.getSession(MQSESSION.java:329)
              > > >         at
              > > com.ibm.mq.MQManagedConnectionJ11.<init>(MQManagedConnectionJ11.java:
              > > > 149)
              > > >         at
              > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11._createManagedConnec
              > > > tion(MQBindingsManagedConnectionFactoryJ11.java:139)
              > > >         at
              > > com.ibm.mq.MQBindingsManagedConnectionFactoryJ11.createManagedConnect
              > > > ion(MQBindingsManagedConnectionFactoryJ11.java:157)
              > > >         at
              > > com.ibm.mq.StoredManagedConnection.<init>(StoredManagedConnection.jav
              > > > a:80)
              > > >         at
              > > com.ibm.mq.MQSimpleConnectionManager.allocateConnection(MQSimpleConne
              > > > ctionManager.java:150)
              > > >         at
              > > com.ibm.mq.MQQueueManager.obtainBaseMQQueueManager(MQQueueManager.jav
              > > > a:666)
              > > >         at com.ibm.mq.MQQueueManager.construct(MQQueueManager.java:615)
              > > >         at com.ibm.mq.MQQueueManager.<init>(MQQueueManager.java:436)
              > > >         at
              > com.ibm.mq.MQSPIQueueManager.<init>(MQSPIQueueManager.java:52)
              > > >         at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:1067)
              > > >         at com.ibm.mq.jms.MQConnection.createQMXA(MQConnection.java:757)
              > > >         at
              > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:209)
              > > >         at
              > > com.ibm.mq.jms.MQQueueConnection.<init>(MQQueueConnection.java:78)
              > > >         at
              > > com.ibm.mq.jms.MQXAQueueConnection.<init>(MQXAQueueConnection.java:46
              > > > )
              > > >         at
              > > com.ibm.mq.jms.MQXAQueueConnectionFactory.createXAQueueConnection(MQX
              > > > AQueueConnectionFactory.java:53)
              > > >         at
              > > weblogic.jms.foreign.mqseries.WrapMQXAQueueConnectionFactory.createXA
              > > > QueueConnection(WrapMQXAQueueConnectionFactory.java:29)
              > > >         at
              > > MQSeriesHelperImpl$JMSObject.<init>(MQSeriesHelperImpl.java:237)
              > > >         at MQSeriesHelperImpl.bridgeWLS2MQS(MQSeriesHelperImpl.java:125)
              > > >         at MQSeriesHelperImpl_WLSkel.invoke(Unknown Source)
              > > >         at
              > > weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
              > > >         at
              > > weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
              > > > a:267)
              > > >         at
              > > weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
              > > > java:22)
              > > >         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
              > > >         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
              > > > End  server side stack trace
              > > > ]
              > > > at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:60)
              > > > at $Proxy1.bridgeWLS2MQS(Unknown Source)
              > > > at MQClient.main(MQClient.java:54)
              > >
              > >
              

  • Start() failed on resource 'jackrabbit': XAER_RMFAIL : Resource manager ...

    Hello Group,
    We are using Weblogic Version 9.2.3 & facing some problem related to 'jackrabbit' not available. I feel we are facing problem similar to the one mentioned in following link
    Re: What causes XAER_RMFAIL : Resource manager is unavailable / unregistered
    Following above post, we tried increased the Initial Capacity of this 'jackrabbit' Resource Adapter to 50. Initially it was 1. Although this doesn't change anything. Although it works fine for a few hours but seems like after server has run for a few hours and served some requests it starts showing this exception.
    Following is our weblogic-ra.xml file.
    <?xml version='1.0' encoding='UTF-8'?>
    <weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <native-libdir></native-libdir>
    <jndi-name>repository</jndi-name>
    <enable-access-outside-app>true</enable-access-outside-app>
    <enable-global-access-to-classes>true</enable-global-access-to-classes>
    <security></security>
    <outbound-resource-adapter>
    <default-connection-properties>
    <pool-params></pool-params>
    <logging></logging>
    </default-connection-properties>
    <connection-definition-group>
    <connection-factory-interface>javax.jcr.Repository</connection-factory-interface>
    <default-connection-properties>
    <pool-params>
         <initial-capacity>50</initial-capacity>
         <max-capacity>100</max-capacity>
    </pool-params>
    <logging></logging>
    <properties>
    <property>
    <name>HomeDir</name>
    <value>jackrabbit-preferences</value>
    </property>
    <property>
    <name>ConfigFile</name>
    <value>jackrabbit-preferences/repository.xml</value>
    </property>
    </properties>
    </default-connection-properties>
    <connection-instance>
    <jndi-name>jackrabbit</jndi-name>
    <connection-properties>
    <pool-params>
         <initial-capacity>50</initial-capacity>
         <max-capacity>250</max-capacity>
    </pool-params>
    <logging></logging>
    <properties>
    <property>
    <name>HomeDir</name>
    <value>jackrabbit-preferences</value>
    </property>
    </properties>
    </connection-properties>
    </connection-instance>
    </connection-definition-group>
    </outbound-resource-adapter>
    </weblogic-connector>
    Also please find below the exception that we see in the logs.
    Caused by: ag.mycompany1.workflow.runtime.DocumentManagementServiceException: null: javax.jcr.RepositoryException: start() failed on resource 'jackrabbit': XAER_RMFAIL : Resource manager is unavailable
    javax.transaction.xa.XAException: Internal error: XAResource 'jackrabbit' is unavailable
         at weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceDescriptor.java:1143)
         at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:685)
         at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1181)
         at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1115)
         at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:274)
         at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:497)
         at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:429)
         at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:118)
         at weblogic.connector.outbound.ConnectionHandlerBaseImpl.prepareHandle(ConnectionHandlerBaseImpl.java:670)
         at weblogic.connector.outbound.ConnectionHandlerBaseImpl.createConnectionHandle(ConnectionHandlerBaseImpl.java:361)
         at weblogic.connector.outbound.ConnectionInfo.createConnectionHandle(ConnectionInfo.java:411)
         at weblogic.connector.outbound.ConnectionManagerImpl.getConnection(ConnectionManagerImpl.java:308)
         at weblogic.connector.outbound.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:115)
         at org.apache.jackrabbit.jca.JCARepositoryHandle.login(JCARepositoryHandle.java:98)
         at org.apache.jackrabbit.jca.JCARepositoryHandle.login(JCARepositoryHandle.java:89)
         at com.mycompany2.infinity.bpm.vfs.jcr.spring.JcrSessionFactory.createSession(JcrSessionFactory.java:38)
         at com.mycompany2.infinity.bpm.vfs.jcr.spring.JcrSessionFactoryUtils.getSession(JcrSessionFactoryUtils.java:72)
         at com.mycompany2.infinity.bpm.vfs.jcr.spring.JcrSessionFactory.getSession(JcrSessionFactory.java:33)
         at com.mycompany2.infinity.bpm.vfs.impl.jcr.AbstractJcrDocumentRepositoryService.doWithJcrVfs(AbstractJcrDocumentRepositoryService.java:537)
         at com.mycompany2.infinity.bpm.vfs.impl.jcr.AbstractJcrDocumentRepositoryService.doWithJcrVfs(AbstractJcrDocumentRepositoryService.java:564)
         at com.mycompany2.infinity.bpm.vfs.impl.jcr.AbstractJcrDocumentRepositoryService.retrieveFileContent(AbstractJcrDocumentRepositoryService.java:186)
         at com.mycompany2.infinity.bpm.vfs.impl.AbstractDocumentRepositoryServiceImpl.retrieveFileContent(AbstractDocumentRepositoryServiceImpl.java:46)
         at ag.mycompany1.workflow.runtime.beans.DocumentManagementServiceImpl$5.withVfs(DocumentManagementServiceImpl.java:112)
         at ag.mycompany1.workflow.runtime.beans.DocumentManagementServiceImpl.adaptVfsCall(DocumentManagementServiceImpl.java:417)
         at ag.mycompany1.workflow.runtime.beans.DocumentManagementServiceImpl.retrieveDocumentContent(DocumentManagementServiceImpl.java:108)
         at sun.reflect.GeneratedMethodAccessor826.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at ag.mycompany1.workflow.runtime.beans.interceptors.CallingInterceptor.invoke(CallingInterceptor.java:18)
         at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
         at ag.mycompany1.workflow.runtime.beans.interceptors.POJOExceptionHandler.invoke(POJOExceptionHandler.java:23)
         at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
         at ag.mycompany1.workflow.runtime.beans.interceptors.GuardingInterceptor.invoke(GuardingInterceptor.java:87)
         at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
         at ag.mycompany1.workflow.runtime.beans.interceptors.AbstractLoginInterceptor.performCall(AbstractLoginInterceptor.java:142)
         at ag.mycompany1.workflow.runtime.beans.interceptors.AbstractLoginInterceptor.invoke(AbstractLoginInterceptor.java:80)
         at ag.mycompany1.workflow.runtime.spring.SpringBeanLoginInterceptor.invoke(SpringBeanLoginInterceptor.java:58)
         at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
         at ag.mycompany1.workflow.runtime.spring.SpringSessionInterceptor$1.doInConnection(SpringSessionInterceptor.java:104)
         at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:342)
         at ag.mycompany1.workflow.runtime.spring.SpringSessionInterceptor.invoke(SpringSessionInterceptor.java:52)
         at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
         at ag.mycompany1.workflow.runtime.spring.SpringConfigurationInterceptor.invoke(SpringConfigurationInterceptor.java:94)
         at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
         at ag.mycompany1.workflow.runtime.beans.interceptors.PropertyLayerProviderInterceptor.invoke(PropertyLayerProviderInterceptor.java:85)
         at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
         at ag.mycompany1.workflow.runtime.beans.interceptors.DebugInterceptor.invoke(DebugInterceptor.java:25)
         at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
         at ag.mycompany1.workflow.runtime.spring.SpringTxInterceptor$1.doInTransaction(SpringTxInterceptor.java:62)
         at org.springframework.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:128)
         at ag.mycompany1.workflow.runtime.spring.SpringTxInterceptor.invoke(SpringTxInterceptor.java:47)
         at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
         at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.execute(MethodInvocationImpl.java:55)
         at ag.mycompany1.workflow.runtime.beans.InvocationManager.invoke(InvocationManager.java:46)
         at $Proxy175.retrieveDocumentContent(Unknown Source)
         at ag.mycompany1.workflow.runtime.spring.DocumentManagementServiceBean.retrieveDocumentContent(DocumentManagementServiceBean.java:70)
         at sun.reflect.GeneratedMethodAccessor826.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at ag.mycompany1.workflow.runtime.spring.SpringServiceFactory$SpringServiceInvocationHandler.invoke(SpringServiceFactory.java:159)
         at $Proxy175.retrieveDocumentContent(Unknown Source)
         at com.infinity.bpm.ui.preferences.AbstractDocumentServicePreferencesManager.loadPreferences(AbstractDocumentServicePreferencesManager.java:318)
         at com.infinity.bpm.ui.preferences.AbstractDocumentServicePreferencesManager.getPreferences(AbstractDocumentServicePreferencesManager.java:269)
         at com.infinity.bpm.ui.preferences.AbstractDocumentServicePreferencesManager.getPreferencesEditor(AbstractDocumentServicePreferencesManager.java:133)
         at com.mycompany2.infinity.bpm.bcc.configuration.TrafficLightViewPropertyProvider.<init>(TrafficLightViewPropertyProvider.java:85)
         at com.mycompany2.infinity.bpm.bcc.configuration.TrafficLightViewPropertyProvider.getInstance(TrafficLightViewPropertyProvider.java:103)
         at com.mycompany2.sims.workflow.tlv.TrafficLightDataLoader.persistData(TrafficLightDataLoader.java:129)
         at com.mycompany2.sims.workflow.tlv.TrafficLightDataLoader.loadData(TrafficLightDataLoader.java:73)
         at com.mycompany2.sims.workflow.SyncSettingsBean.reload(SyncSettingsBean.java:73)
         at com.mycompany2.sims.workflow.EnterpriseSettings.isWorklistConfigured(EnterpriseSettings.java:143)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.myfaces.el.PropertyResolverImpl.getProperty(PropertyResolverImpl.java:457)
         at org.apache.myfaces.el.PropertyResolverImpl.getValue(PropertyResolverImpl.java:85)
         at com.sun.facelets.el.LegacyELContext$LegacyELResolver.getValue(LegacyELContext.java:141)
         at com.sun.el.parser.AstValue.getValue(AstValue.java:96)
         at com.sun.el.ValueExpressionImpl.getValue(ValueExpressionImpl.java:183)
         at com.sun.facelets.el.TagValueExpression.getValue(TagValueExpression.java:71)
         at com.sun.facelets.tag.TagAttribute.getObject(TagAttribute.java:233)
         at com.sun.facelets.tag.TagAttribute.getBoolean(TagAttribute.java:79)
         at com.sun.facelets.tag.jstl.core.ChooseWhenHandler.isTestTrue(ChooseWhenHandler.java:49)
         at com.sun.facelets.tag.jstl.core.ChooseHandler.apply(ChooseHandler.java:67)
         at com.sun.facelets.tag.jsf.ComponentHandler.applyNextHandler(ComponentHandler.java:314)
         at com.sun.facelets.tag.jsf.ComponentHandler.apply(ComponentHandler.java:169)
         at com.sun.facelets.tag.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:47)
         at com.sun.facelets.tag.jsf.core.ViewHandler.apply(ViewHandler.java:109)
         at com.sun.facelets.compiler.NamespaceHandler.apply(NamespaceHandler.java:49)
         at com.sun.facelets.compiler.EncodingHandler.apply(EncodingHandler.java:25)
         at com.sun.facelets.impl.DefaultFacelet.apply(DefaultFacelet.java:95)
         at com.sun.facelets.FaceletViewHandler.buildView(FaceletViewHandler.java:524)
         at com.sun.facelets.FaceletViewHandler.renderView(FaceletViewHandler.java:567)
         at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
         at org.apache.myfaces.lifecycle.RenderResponseExecutor.execute(RenderResponseExecutor.java:41)
         at org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:132)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:140)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:147)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at ag.mycompany1.web.jsf.common.ExceptionFilter.doFilter(ExceptionFilter.java:45)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:290)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._invokeDoFilter(TrinidadFilterImpl.java:250)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:207)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:161)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at ag.mycompany1.web.jsf.common.LoginFilter.doFilter(LoginFilter.java:250)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3251)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    : start() failed on resource 'jackrabbit': XAER_RMFAIL : Resource manager is unavailable
    Any help in this regard is highly appreciated. Thanks.

    Hi,
    Can you please try increase the below MaxXACallMillis setting in Weblogic set 'Maximum Duration of XA Calls' to a bigger value
    MaxXACallMillis: Sets the maximum allowed duration (in milliseconds) of XA calls to XA resources. This setting applies to the entire domain.
    http://docs.oracle.com/cd/E12840_01/wls/docs103/jta/trxcon.html
    The parameter is exposed through administration console: services --> jta --> advanced --> "Maximum Duration of XA Calls:"
    Check the below docs for more information
    WLS 10.3: Intermittent XA error: XAResource.XAER_RMERR (Doc ID 1118264.1)
    Hope it Helps

Maybe you are looking for