Resource minimized for ECC 6.0 with EHp5 upgrade

Hi All
Please can anybody help with the resource downtime queries?
1. During the shadow instance installation do we need to down the production system? Or we can install in parallel with the prodcution instance and during the upgrade activities we will shutdown the production isntance.
2. How much downtime is required for end to end if we go for Downtime minimised or Resource minimised?
Thanks
Rajat Sarkar

Hi,
Main difference between the resource minimized and downtime minimized strategies is - the length of production system downtime. As per the upgrade guide:
- if you go with resource minimized, the downtime of system starts at the end of preparation phase itself.
- if you go with downtime minimized, the downtime of system starts in between the actual upgrade - when actual import starts.
- the end of system downtime, ends at the same time - irrespective of the strategy chosen.
Would suggest you to refer to: https://service.sap.com/~sapidb/011000358700000749432010E Section 3.2 especially.
Hence the length of downtime for your system - increases if you choose the resource minimized. But however, as Sunny mentioned, we here in the forum cannot give you an exact downtime value for each of the strategies. It depends on a lot of factors and best approach is to do test runs for the your system - using both the strategies and then compare the results.
Regards,
Srikishan

Similar Messages

How to package resource files for iPad app along with ipa file

Hello,
I am developing an app for iPad in Flash Builder 4 and Packager for Iphone.
I want to keep my xml-asset files local to the app. When I run my app in flash builder, I load the resources locally.
When I upload the same onto iPad, I need to package the resource files along with the ipa file.
I tried compiling the air-project with "-include-file" compiler option, but in vain.
Any help?
Tanu

You can read through the resources documentation for iOS here:
http://help.adobe.com/en_US/air/extensions/WSf268776665d7970d-2e74ffb4130044f3619-7ff8.htm l
Of particular interest is the line:
"3. It moves the resource files to the top-level directory of the application."
So not sure if you are using an ant build script or whatever to build your ANE, but as long as you place these json files into the folder with your library when you build the ANE, these will end up getting copied to the top-level directory of the application when an application is built using this ANE.
This is exactly how I include an iOS .bundle of resources along with a .a in an ANE and it works fine. Nice clean packaging when distributing the ANE too.

NCO for ECC 6.0 with unicode

good morning all,
we are currently implementing ecc 6.0 from 4.6c and in the process, having problems with NCO (sap connector for .net).
we were able to determine a number of issues we have had with versions, and soap but now we are stuck and was wondering if someone has had an issue like the following.
we receive emails and the data within the emails is processed via the NCO to a RFC function module. the c# program is working in 4.6c.
in ecc 6.0, the c# program connects, passes some data, the function module runs, creates a claim in sap and the c# program receives a success from NCO. but, not all the data is being passed to SAP. there are 10 structures that can be filled and sent from the c# app. only one of the tables is being received and 3 are not being received. the other 6 are not used. the only other significant piece of information is that the table that is being received by SAP, is a customer defined structure. the standard structures are not populated.
therefore, the issue is that when the claim is created, it is incomplete.
any help is appreciated.
thanks.

we changed to websense. this has fixed the issue.
thanks all.

Delta load for 2LIS_06_INV is failing after EHP5 upgrade of ECC system

Hi Experts,
Our ECC Production system was upgraded to EHP5 last weekend.
Since then Delta load for datasource 2LIS_06_INV is failing. This is the only datasource got impacted. Full Load and Initialization Loads are running fine. Only Delta load is failing because of following error:
Error in the ABAP Application Program
The current ABAP program "SAPMSSY1" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/BI0/SAPLQI2LIS_06_INV " in
include "/BI0/LQI2LIS_06_INVU04 " in
line 1:
"Function "/BI0/QI2LIS_06_INV0002" not found in Function Library."
Thanks and Regards,
Sandeep Sharma

SAP suggested Note to fix this issue.

BAPI for Maintenance Plan Scheduling with EHP5

Hello.
In documentation for LOG_EAM_CI_4 mentioned that: [API functions have been developed for the scheduling of maintenance plans. These APIs provide the same functions as transaction IP10: the creation of maintenance calls or the changing of existing maintenance calls|http://help.sap.com/erp2005_ehp_05/helpdata/EN/33/46AC67364447A3BA2F4EFA65B8C014/frameset.htm].
We have activated EHP5 and all LOG_EAM_CI* business functions in our system, but still can't find this "magic" BAPI.
Does anybody know its name?
BR,
Pavel
Edited by: Pavel Nedvijaev on Nov 7, 2011 5:37 PM

Maheswaran.K thanks for your reply, but as i wrote above we have activated all LOG_EAM_CI* including LOG_EAM_CI_3.
Version of software components SAP_APPL, EA-APPL is 605 as it needed.

I've run LastPass for over a year, with the upgrade to FireFox 6 I can't switch logins on sites like Google where I have more than one login.

I have 6 Google logins stored in LastPass. Since I upgraded FireFox to v.6, I can't choose an alternate login to my normal one. I also have occasional trouble with LastPass simply not filling in my login information at all, for instance on my Merrill Lynch online account. I opened a ticket with them and they said it was Google's fault. It was working perfectly until the last FireFox upgrade.

Just for the record: this turned out to be an issue with backleveled Java code. If you still have it, go to the Java code site and check to make sure you have the latest version. If you don't, download it and it should fix the problem.

Hardware Requirements for ECC 6.0

Hi everyone.
Can anyone tell me the hardware requirements for ECC 6.0 with RAID implementation
OR
Any link where i can find the information.
**i did check in the market place***
Thank you
Kiran Kumar

Hi,
Begin in http://service.sap.com/quicksizing for hardware requirements in SAPS(processing), memory and disk space. Then check in installation guides http://service.sap.com/instguides the best configuration
of the disks in RAID. Basically:
RAID 1 - database server program files
RAID 5 - data files SAP
RAID 1 - transaction log file
Best regards,
Roger Vier

Is it a must to use Solution manager for ECC 6.0 upgrade

Is it a must to use Solution Manager for ECC 6.0 (FICO & HR) upgrade? I am told Solution Manager is required only if it has ABAP and JAVA stacks, or involves Enhancement Packages; and could be optional if it is only ECC 6.0 with ABAP stacks.

Hi,
I'm having a difficult time finding some guidance for setting up our R/3 Enterprise system in solman properly, so that I can create the upgrade XML file required to go directly to ERP 6.0 EHP4.
I've set up the R/3 system fine, but when i create a maintenance transaction i cannot for the life of me figure out how to tell it I want to go from r/3 to ERP6 ehp4.
Any docs out there for this?
Thanks!
I figured it out... i had to add the R/3 Enterprise logical components to my system landscape. After that I was able to select R/3 as the initial data in the maintenance transaction and then the system i wanted to upgrade, and then the option to upgrade.
Never mind!
Edited by: Tom Janes on Sep 9, 2009 12:52 AM

Requirements for ECC

Hi Gurus,
I would like to install ECC IDES version on my workstation.Could you please provide the basic requirements for installation ECC.
Thanks in Advance,
Sachin Kumar.

hello
u didn't mention clearly
for ECC 6.0 (with out bi,pi,ep) requires 2gb ram 240gb harddisk processor - dual core or core@dual
for ECC 6.0(with bi,pi,ep) requires > 2gb ram 320 gb harddisk
processor - dual core or core@dual

The new features avilable in webdynpro for abap with EHP5

Hi,
Currently our ECC 6.0 is upgraded with EHP5 from EHP3.
Could anyboy tell me the new featues available in webdynpro for abap for this EHP5. If i develop WDA objects in EHP3 environment and transport it to new system with EHP5 . What would be the problems i encounter. kindly suggest me..
thanks,
Raghu

I would expect in any case that there is no problem when you transport WDA build from ehp3 to ehp5 (Backward compatibility ).

RFC calls with SAP JCO and IBM resource adapter for SAP - basic tuning

Hi experts,
we are working on a java portal connected to a backend system SAP by calling RFCs.
On our first integration tests, it appears to be quite slow fetching data from SAP by calling the remote functions from the custom portal. We are using SAP JCo 3.0.6 and IBM resource adapter for SAP 7.0.0.3 to integrate SAP with our portal.
Is there any basic tuning to achieve to improve performances or any hint of where to tune in SAP ?
Any help would be greatly appreciated.
Thanks a lot,
Jamal

Hi Jamal,
I understand you have already checked performance issues in the SAP Server. We had some problems with certain RFC calls and it turned out to be a badly developed ABAP sentence.
I'd recommend you to use httpwatch or another tool to check the response times from the browser, so you can point accurately where the is.
Regards
Francisco

SAP ECC 6.0 and EHP5 Installation with DIMP functionatilty

Hi Frineds,
We are installaing ECC6.0 and EHP5 fresh installation and looking for DIMP functionality too active in the system.
If we do only installation only Central Application Usage type then we can directly install EHP5 system (Central Application consist of SAP_APPL & EA-APPL).
But My question can we get the DIMP also after this installation type or we need to first install ECC6.0 and then upgrade EHP to get the DIMP function..I have not seen this answer any where in the guide or in SDN...
Thanks.

Hi Manas,
ECC-DIMP is a add-on to ECC so you can install this add-on or perform a delta upgrade.
Relevant installation and support packages are available on SAP Service Marketplace.
Check Note 874473 - Release strategy for ECC-DIMP as of ECC 6.0
Many Thanks.
Ravindra Mirashi

Inqmy resource adapter for SAP with Bea Weblogic Server

          Hi everybody,
          Anybody have tried to use INQMY resource adapter for SAP with Bea weblogic server
          It works well with INQMY server, but with BEA I'm getting a lot of problems creating
          the connections.
          Thanks in advance.
          Xavi.


All,
          Here are the steps we (used for internal testing) had to perform to get
          IN-Q-MY adapter for SAP to work with WebLogic:
          The wli.adapter.inqmy.sapr3.spi package contains extensions to the
          In-Q-My J2EE Connector Architecture classes to overcome some limitations
          in the base implementation classes. To get around these issues, we had
          to extend their R3ManagedConnectionFactory, R3ConnectionManager, and
          R3ConnectionFactory classes.
          * The javax.resource.spi.ManagedConnectionFactory implementation
          does not over-ride the equals and hashCode methods correctly. This
          causes problems with WLS 6.1.
          * There is a bug in their javax.resource.spi.ConnectionManager
          implementation for non-managed uses of the adapter. Consequently, their
          adapter cannot be used in a non-managed scenario.
          * The javax.resource.cci.ConnectionFactory class does not support
          the getConnection() method that does not take any arguments (it throws a
          null pointer exception).
          I am attaching the classes discussed above.
          Cheers,
          Chris
          Torsten Friebe wrote:
          > Hi,
          >
          > does anybody know where to get a trail version - if one exists - of IN-Q-MY
          > application server or the resource adapter?
          >
          > Thanks, regards
          > Torsten
          >
          > "Xavi" <[email protected]> schrieb im Newsbeitrag
          > news:[email protected]...
          >
          >>Hi everybody,
          >>
          >>Anybody have tried to use INQMY resource adapter for SAP with Bea weblogic
          >>
          > server
          >
          >>?
          >>
          >>It works well with INQMY server, but with BEA I'm getting a lot of
          >>
          > problems creating
          >
          >>the connections.
          >>
          >>Thanks in advance.
          >>Xavi.
          >>
          >>
          >
          >
          package wli.adapter.inqmy.sapr3.spi;
          import java.io.Serializable;
          import javax.resource.ResourceException;
          import javax.resource.cci.Connection;
          import javax.resource.cci.ConnectionSpec;
          import javax.resource.spi.ConnectionManager;
          import javax.resource.spi.ConnectionRequestInfo;
          import javax.resource.spi.ManagedConnection;
          import javax.resource.spi.ManagedConnectionFactory;
          import com.inqmy.r3adapter.R3ConnectionSpec;
          import com.inqmy.r3adapter.R3ManagedConnectionFactory;
          * Extends the In-Q-My implementation to allow for getConnection() with no
          * connection spec, i.e. use the default configured connection parameters.
          public class R3ConnectionFactory
          extends com.inqmy.r3adapter.R3ConnectionFactory
          implements com.bea.connector.IProxyMarker {
          private R3ConnectionSpec m_cspec;
          public R3ConnectionFactory(ConnectionManager cm, R3ManagedConnectionFactory mcf)
          throws ResourceException {
          super(cm, mcf);
          String strClientNumber = mcf.getClientNumber();
          if (strClientNumber == null) {
          throw new javax.resource.spi.IllegalStateException("ClientNumber not set for "+mcf);
          String strLanguage = mcf.getLanguage();
          if (strLanguage == null) {
          throw new javax.resource.spi.IllegalStateException("Language not set for "+mcf);
          String strUserName = mcf.getUserName();
          if (strUserName == null) {
          throw new javax.resource.spi.IllegalStateException("UserName not set for "+mcf);
          String strPassword = mcf.getPassword();
          if (strPassword == null) {
          throw new javax.resource.spi.IllegalStateException("Password not set for "+mcf);
          m_cspec = new R3ConnectionSpec(strClientNumber, strLanguage, strUserName, strPassword);
          public Connection getConnection(ConnectionSpec connectionSpec)
          throws ResourceException {
          if (connectionSpec == null) connectionSpec = m_cspec;
          return super.getConnection(connectionSpec);
          package wli.adapter.inqmy.sapr3.spi;
          import java.io.Serializable;
          import javax.resource.ResourceException;
          import javax.resource.spi.ConnectionManager;
          import javax.resource.spi.ConnectionRequestInfo;
          import javax.resource.spi.ManagedConnection;
          import javax.resource.spi.ManagedConnectionFactory;
          * Extends the In-Q-My implementation to over-ride the
          * allocateConnection method to return a CCI connection vs. a ManagedConnection
          public class R3DefaultConnectionManager
          implements ConnectionManager, Serializable {
          public R3DefaultConnectionManager() {}
          public Object
          allocateConnection(ManagedConnectionFactory mcf, ConnectionRequestInfo cri)
          throws ResourceException {
          ManagedConnection mc = mcf.createManagedConnection(null, cri);
          return mc.getConnection(null, cri);
          package wli.adapter.inqmy.sapr3.spi;
          import javax.resource.spi.ConnectionManager;
          import javax.resource.spi.ConnectionRequestInfo;
          import javax.resource.spi.ManagedConnection;
          import javax.security.auth.Subject;
          * Extends the In-Q-My implementation to get around some problems encountered
          * while running on WebLogic:
          * <ul>
          * <li>Must over-ride default implementation of equals and hashCode method</li>
          * <li>Needed to provide my version of the CCI ConnectionFactory</li>
          * <li>Needed to provide my version of the default ConnectionManager for the
          * non-managed scenario use case</li>
          * </ul>
          public class R3ManagedConnectionFactory
          extends com.inqmy.r3adapter.R3ManagedConnectionFactory {
          private int m_iHashCode;
          transient private com.inqmy.r3adapter.R3ConnectionRequestInfo t_cri = null;
          public R3ManagedConnectionFactory() {
          super();
          java.rmi.server.UID uid = new java.rmi.server.UID();
          m_iHashCode = uid.hashCode();
          public Object createConnectionFactory() {
          // need to install our own default connection manager because In-Q-My
          // version causes a ClassCastException in CCI ConnectionFactory
          // getConnection
          return createConnectionFactory(new R3DefaultConnectionManager());
          public ManagedConnection createManagedConnection(Subject subject, ConnectionRequestInfo cri)
          throws javax.resource.ResourceException {
          // need to check for null on the ConnectionRequestInfo object because the
          // In-Q-My R3ManagedConnection ctor does not check for null
          if (cri == null) cri = getDefaultConnectionRequestInfo();
          return new com.inqmy.r3adapter.R3ManagedConnection(this, subject, cri);
          public Object createConnectionFactory(ConnectionManager connectionManager) {
          // need to supply a connection factory that can deal with getConnection
          // that does not take a ConnectionSpec
          try {
          return new R3ConnectionFactory(connectionManager, this);
          } catch (javax.resource.ResourceException re) {
          re.printStackTrace();
          throw new java.lang.IllegalStateException(re.getMessage());
          com.inqmy.r3adapter.R3ConnectionRequestInfo getDefaultConnectionRequestInfo()
          throws javax.resource.spi.IllegalStateException {
          if (t_cri == null) {
          String strClientNumber = this.getClientNumber();
          if (strClientNumber == null) {
          throw new javax.resource.spi.IllegalStateException("ClientNumber not set for "+this);
          String strLanguage = this.getLanguage();
          if (strLanguage == null) {
          throw new javax.resource.spi.IllegalStateException("Language not set for "+this);
          String strUserName = this.getUserName();
          if (strUserName == null) {
          throw new javax.resource.spi.IllegalStateException("UserName not set for "+this);
          String strPassword = this.getPassword();
          if (strPassword == null) {
          throw new javax.resource.spi.IllegalStateException("Password not set for "+this);
          t_cri = new com.inqmy.r3adapter.R3ConnectionRequestInfo(strClientNumber, strLanguage, strUserName, strPassword);
          return t_cri;
          public boolean equals(Object obj) {
          if (obj == null) return false;
          if (obj == this) return true;
          if (!this.getClass().isInstance(obj)) return false;
          R3ManagedConnectionFactory mcf = (R3ManagedConnectionFactory)obj;
          return compare(getClientNumber(), mcf.getClientNumber()) &&
          compare(getLanguage(), mcf.getLanguage()) &&
          compare(getUserName(), mcf.getUserName()) &&
          compare(getPassword(), mcf.getPassword()) &&
          compare(getServerName(), mcf.getServerName()) &&
          compare(getSystemNumber(), mcf.getSystemNumber());
          protected final boolean compare(final Object obj1, final Object obj2) {
          if (obj1 == obj2) return true;
          if (obj1 != null) {
          return obj1.equals(obj2);
          } else {
          if (obj2 == null) {
          return true;
          } else {
          return false;
          public int hashCode() { return m_iHashCode; }

Hardware Resources For ECC 6.0

Hello,
Can anyone assist me in determining the hardware requirement
for ECC 6.0 installation (Server config. CPU, RAM, DISK SPACE etc.)
Thanks & Regards,
Sumit

It all depends on the no.of user/ DB / OS. Quick sizer is good tool to opt for.
Run the pre-requisite check and select all ABAP and JAVA components in the list and it will give all the required information in the final summary report.
For better performance 8-16GB RAM for dual stack is good.

Maintenance order Operation mass change with Ehp5

Hi Experts,
We are currently working in ECC 6.0 Ehp3 and we are exploring the additional features with Ehp5.
To explore the Ehp5 functionalities (Maintenance order Operation Account Assignment and Operation mass change) we did the foloowing:
1. LOG_EAM_CI_2 to LOG_EAM_CI_5 and LOG_EAM_LINEAR_1 business function is activated
2. LOG_EAM_OLC: Operation Account Assignment business function is activated
3. Under Define Cost settings configuration, the relevant Plant and Order type checkbox is activated
4. The user role is adjusted to enable the Maintenance order Operation mass change functionality
Suppose the LOG_EAM_OLC business function is activated on 01.02.2012
The Maintenance orders created before 01.02.2012 is allowed to do the Maintenance order Operation mass change.
But the Maintenance orders created after 01.02.2012 is not allowing to do the Operation mass change and throwing the error message.
Error message: Operation Account Assignment orders (order type XX) are not supported
Program name: SAPLIBAPI_ALM_ORDER_PROCESSING
Message Class: ERP_CO_OLC_E (Messages for Operative Level Costing)
Message number: 066
I have reffered the supporting documents, but it didn't helped.
Please help me.
Thanks,
Raj

Hi,
I expect the issue is with BAPI_ALM_ORDER_MAINTAIN. The mass change functionality usues this BAPI but the BAPI does not currently support OLC orders. When you try to change OLC orders via the BAPI (or the mass change functionality tries to do it) this is prevented and the error message is issued.
At the moment, you will not be able to use mass change for OLC orders.
-Paul

Resource minimized for ECC 6.0 with EHp5 upgrade

Similar Messages

Maybe you are looking for