Resource not configured properly
Hi,
I had created a generic resource say ResourceX. Now when I disable a user who has been granted this resource X, I get following exception:
DOBJ.RESOURCE_NOTCONFIGURED_PROPERLYOne or more provisioned resource is not configured properly
I am using OID connector to provision into LDAP. This is making changes in orclisenabled attribute, but not in status attribute.
But when I try to simply disable a user without granting him this resource, its working fine.
What can teh problem be?
N.B. I havent defined any delete or disable task in the resource.
Re: ADCS Enable User is not getiing Initiated
Similar Messages
-
One or More Resource is not configured properly ..
All,
I am having issue when i am trying to disable a user , on the UI , its throwing an error saying "One or More Resource is not configured properly .."
Can you please help me to understand the issue
Thanks
Preeti ..You can try isolating the resource which is causing the issue , make sure that all the resources are having disable trigger mapped in Task effect of the task .
Thanks
Suren -
Error message when Database details are not configured properly
Hi,
I am using JDeveloper 11.1.1.1.4 and ADF-BC in my project.
I use Weblogic Data Source connection to connect to Database.
I have a requirement that when data base details are not configured properly in Weblogic Data Source or when Database is down,I need to display an error message either when I access application task flows or in login page itself when application starts.
Can I achieve this???Please advice.
Regards,
PraveenPraveen,
Check out Steve's example
https://blogs.oracle.com/smuenchadf/resource/examples#129
-Arun -
I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
C:\Documents and Settings\abigail>emctl status emkey
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is not configured properly or is corrupted in the file system and doe
s not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
onfig directory.
2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
.ora file location>".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is already configured. To override the current configuration, run "em
ctl config emkey <options> -force".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The Em Key could not be configured. Unable to access file E:\app\abigail\product
\11.2.0\dbhome_1\sysman\config.
C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://ABIGAIL:5501/em/console/aboutApplication
DBCONSOLE already stopped... Done.
Agent is already stopped... Done.
Securing dbconsole... Started.
Please enter repository schema password:
Securing dbconsole... Failed.
EMKey is misconfigured.Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
ANyway, thank youuuu -
Hi all,
I recently got that a new USB CDMA modem which works fine on Windows 7 system but when I try connecting to my other laptop which runs on Windows 8.1, it keeps giving the error:
Error 633: The modem (or other connecting device) is already in use or is not configured properly. I've most of the links and solutions shared but none seems to work. I've generated diagnostic logs which are as follows. I interpreted some and most probably
it seems like an issue of incompatible driver, but does anyone else sees any issues in these diagnostic logs. Looking forward to your suggestions.
[4724] 06-01 20:01:56:314: ENTRY: Reading "Reliance Netconnect+"
[4724] 06-01 20:01:56:315:
Before LoadPortsList2 in ReadEntryList()
[4724] 06-01 20:01:56:315: LoadPortsList2
[4724] 06-01 20:01:56:315: GetRasPorts
[4724] 06-01 20:01:56:315: RasPortEnum...
[4724] 06-01 20:01:56:315: RasPortEnum=603,c=10
[4724] 06-01 20:01:56:315: RasPortEnum...
[4724] 06-01 20:01:56:315: RasPortEnum=0,c=10
[4724] 06-01 20:01:56:315: RasGetDevConfig
[4724] 06-01 20:01:56:316: RasGetDevConfig=603
[4724] 06-01 20:01:56:316: RasGetDevConfig
[4724] 06-01 20:01:56:316: RasGetDevConfig=0
[4724] 06-01 20:01:56:316: SanitizeUnimodemBlob: mdm prot=0
[4724] 06-01 20:01:56:316: Port=COM17,fHw=0,fEc=0,bps=921600,fSp=0,prot=0
[4724] 06-01 20:01:56:316: StringCchCopy failed due to error 0x8007007a
[4724] 06-01 20:01:56:317: LoadPortsList=0
[4724] 06-01 20:01:56:317: successfully finished LoadPortsList2 in ReadEntryList()
[4724] 06-01 20:01:56:317: Reading media group "serial"
[4724] 06-01 20:01:56:317: New link format
[4724] 06-01 20:01:56:317:
DUPTEST:Port in this media
[4724] 06-01 20:01:56:317: Port=COM17
[4724] 06-01 20:01:56:317:
Trying to match the phonebook port in the system ports
[4724] 06-01 20:01:56:318: Port configured
[4724] 06-01 20:01:56:318: SetDefaultModemSettings(bps=921600)=1
[4724] 06-01 20:01:56:318: Reading device group "modem"
[4724] 06-01 20:01:56:318: Device List after deleting dupe
[4724] 06-01 20:01:56:318: StringCchCopy failed due to error 0x8007007a
[4724] 06-01 20:01:56:318: Fix entry type, 0 to 1
[4724] 06-01 20:01:56:318: Device List after deleting dupe
[4724] 06-01 20:01:56:318: ReadRasFile: ReadEntryList returned 0
[4724] 06-01 20:01:56:318: RASSQM: In ReadPhonebookFile Number of myuse profiles set 1
[4724] 06-01 20:01:56:318: ReadPhonebookFile returns 0
[4724] 06-01 20:01:56:318: RasGetAutodialAddressW
[4724] 06-01 20:01:56:318: RasGetAutodialAddressW
[4724] 06-01 20:01:56:318: DwEnumEntryDetails done. 0
[4724] 06-01 20:01:56:318: RasGetEntryPropertiesW
[4724] 06-01 20:01:56:318: IsRasmanServiceRunning=1
[4724] 06-01 20:01:56:318: IsRasmanServiceRunning=1
[4724] 06-01 20:01:56:318: GetPbkAndEntryName
[4724] 06-01 20:01:56:318: ReadPhonebookFileEx: called for pbk C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
[4724] 06-01 20:01:56:318: IsPublicPhonebook=0
[4724] 06-01 20:01:56:318: path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:56:318: full path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:56:318: IsVirtualizationNeeded: return value = 0
[4724] 06-01 20:01:56:319: ENTRY: Reading "Reliance Netconnect+"
[4724] 06-01 20:01:56:319:
Before LoadPortsList2 in ReadEntryList()
[4724] 06-01 20:01:56:319: LoadPortsList2
[4724] 06-01 20:01:56:319: GetRasPorts
[4724] 06-01 20:01:56:319: RasPortEnum...
[4724] 06-01 20:01:56:319: RasPortEnum=603,c=10
[4724] 06-01 20:01:56:319: RasPortEnum...
[4724] 06-01 20:01:56:319: RasPortEnum=0,c=10
[4724] 06-01 20:01:56:319: RasGetDevConfig
[4724] 06-01 20:01:56:320: RasGetDevConfig=603
[4724] 06-01 20:01:56:320: RasGetDevConfig
[4724] 06-01 20:01:56:320: RasGetDevConfig=0
[4724] 06-01 20:01:56:320: SanitizeUnimodemBlob: mdm prot=0
[4724] 06-01 20:01:56:320: Port=COM17,fHw=0,fEc=0,bps=921600,fSp=0,prot=0
[4724] 06-01 20:01:56:320: StringCchCopy failed due to error 0x8007007a
[4724] 06-01 20:01:56:322: LoadPortsList=0
[4724] 06-01 20:01:56:322: successfully finished LoadPortsList2 in ReadEntryList()
[4724] 06-01 20:01:56:322: Reading media group "serial"
[4724] 06-01 20:01:56:322: New link format
[4724] 06-01 20:01:56:322:
DUPTEST:Port in this media
[4724] 06-01 20:01:56:322: Port=COM17
[4724] 06-01 20:01:56:322:
Trying to match the phonebook port in the system ports
[4724] 06-01 20:01:56:322: Port configured
[4724] 06-01 20:01:56:322: SetDefaultModemSettings(bps=921600)=1
[4724] 06-01 20:01:56:322: Reading device group "modem"
[4724] 06-01 20:01:56:322: Device List after deleting dupe
[4724] 06-01 20:01:56:322: StringCchCopy failed due to error 0x8007007a
[4724] 06-01 20:01:56:322: Fix entry type, 0 to 1
[4724] 06-01 20:01:56:322: Device List after deleting dupe
[4724] 06-01 20:01:56:322: ReadRasFile: ReadEntryList returned 0
[4724] 06-01 20:01:56:322: RASSQM: In ReadPhonebookFile Number of myuse profiles set 1
[4724] 06-01 20:01:56:322: ReadPhonebookFile returns 0
[4724] 06-01 20:01:56:322: DuplicatePhoneNode
[4724] 06-01 20:01:56:322: GetPbkAndEntryName. rc=0x0
[4724] 06-01 20:01:56:322: GetInstalledProtocolsEx=0xc.
[4724] 06-01 20:01:57:690: DwEnumEntryDetails
[4724] 06-01 20:01:57:690: IsRasmanServiceRunning=1
[4724] 06-01 20:01:57:690: IsRasmanServiceRunning=1
[4724] 06-01 20:01:57:690: ReadPhonebookFileEx: called for pbk C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
[4724] 06-01 20:01:57:690: IsPublicPhonebook=1
[4724] 06-01 20:01:57:690: path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:690: full path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:690: IsVirtualizationNeeded: return value = 1
[4724] 06-01 20:01:57:690: GetLUAPhonebookPath: Return value 0 hiddenpbk path C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\_hiddenPbk\rasphone.pbk
[4724] 06-01 20:01:57:690: ReadRasFile: ReadEntryList returned 0
[4724] 06-01 20:01:57:690: SyncMasterPhonebookFile:++
[4724] 06-01 20:01:57:690: IsPublicPhonebook=1
[4724] 06-01 20:01:57:690: path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:690: full path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:690: FindFirstFile failed with 0x2
[4724] 06-01 20:01:57:690: ReadRasFile: File C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk does not exist
[4724] 06-01 20:01:57:690: DeleteEntriesOnlyInHiddenPhonebookFile ++
[4724] 06-01 20:01:57:690: WritePhonebookFile
[4724] 06-01 20:01:57:690: ModifyEntryList: Number of connections written 0
[4724] 06-01 20:01:57:690: RASSQM: In WritePhonebookFile Number of alluser profiles set 0
[4724] 06-01 20:01:57:690: DeleteEntriesOnlyInHiddenPhonebookFile : WritePhonebookFile failed with 0
[4724] 06-01 20:01:57:690: RASSQM: In ReadPhonebookFile Number of alluser profiles set 0
[4724] 06-01 20:01:57:690: ReadPhonebookFile returns 0
[4724] 06-01 20:01:57:691: IsRasmanServiceRunning=1
[4724] 06-01 20:01:57:691: IsRasmanServiceRunning=1
[4724] 06-01 20:01:57:691: ReadPhonebookFileEx: called for pbk C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
[4724] 06-01 20:01:57:691: IsPublicPhonebook=0
[4724] 06-01 20:01:57:691: path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:691: full path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
[4724] 06-01 20:01:57:691: IsVirtualizationNeeded: return value = 0Hi,
We could get more information about your problem through this log. While, for your problem, first of all, it would be better to contact USB Modem manufacture to confirm its compatibility with Windows edition.
After that, make sure its driver was upgraded to be latest.
Roger Lu
TechNet Community Support -
"Your server is not configured properly or your search query has ..."
Config info:
v490, 20k+users, JES 2005Q1,
118540-23
118207-42
115614-20
Brief Description:
When users select the Corporate Directory under the Address Book tab in CE and click the ALL button (or do a wildcard search) they get the following error:
"Your server is not configured properly or your search query has
exceeded the limit. Please check server configuration."
Additional info:
Additionally this error shows up when a user chooses a View: letter and clicks next for the following page, and additionally if they have the Corporate Directory set as their default address book in options.
Logs:
/sun1/dirserv/slapd-mail/logs/errors:
[11/Oct/2005:10:44:21 -0500] - WARNING<20805> - Backend Database - conn=161557 op=34 msgId=169 - search is not indexed
/sun1/dirserv/slapd-mail/logs/access:
[11/Oct/2005:10:23:21 -0500] conn=161557 op=17 msgId=124 - SRCH base="o=ualr.edu,dc=mail,dc=ualr,dc=edu" scope=2
filter="(&(&(cn=*)(|(objectClass=INETORGPERSON)(objectClass=GROUPOFUNIQUENAMES)))(objectClass=*))"
attrs="objectClass"
[11/Oct/2005:10:23:31 -0500] conn=161557 op=17 msgId=124 - RESULT err=0 tag=101 nentries=20540 etime=10 notes=U
/var/sun1/comexp/logs/uwc.log:
Oct 11, 2005 10:52:20 AM com.sun.uwc.abclient.ABInitFilter doFilter WARNING: Address Book session already set!!
changes in /var/sun1/comexp/WEB-INF/config/corp-dir/db_config.properties
lookthru_limit=30000
I have a ticket, just wondering if anyone else has this problem...You'll be getting this in your case update (answer in response to the internal conversation we've been having about your issue)
So if they really want to control wildcard searches then they should look in the "personalstore.properties" file for the domain (default: /var/opt/SUNWuwc/WEB-INF/domain/personalstore.properties) for the value of "db.idir.wildcardsearch". Its possible settings are documented in the comments. If they wish to disable all "*" and "*x*" searches (i.e. turn off the 'All' and selecting a letter options) they should set the value to at least 2. -
SOLVED: Dell XPS 1530 wireless not configured properly , need help.
Had another post about different questions but after playing around with this for a few days I think that my wifi is not configured properly. Every thing looks good on the hardware and driver end and shows up properly.
This is my wifi card
grep -i wireless
0b:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:15:C5:84:7A:7C
inet addr:162.178.12.101 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::215:c5ff:fe84:7a7c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6225 errors:0 dropped:0 overruns:0 frame:0
TX packets:6557 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4309676 (4.1 Mb) TX bytes:996746 (973.3 Kb)
Interrupt:16
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:380 (380.0 b) TX bytes:380 (380.0 b)
wlan0 Link encap:Ethernet HWaddr 00:1C:BF:75:0A:1F
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wmaster0 Link encap:UNSPEC HWaddr 00-1C-BF-75-0A-1F-00-00-00-00-00-00-00-00-00-00
[NO FLAGS] MTU:0 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
My rc.conf is asfollows.
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="local"
USEDIRECTISA="no"
TIMEZONE="America/Toronto"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="archtom"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="eth0 162.178.12.101 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(eth0 wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 162.178.12.1"
#ROUTES=(!gateway)
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond alsa hal fam gdm)
Another think is the card is there and recognized but the led light is not on so the card is not actually turning on and that can be an issue so can not scan for networks or even bring wlan0 up as I get this error.
SIOCSIFFLAGS: No such file or directory
Your help would be greatly appreciated as though I have used Ubuntu and Fedora for years everything worked out of the box so this is new to me. He he breakage I love Arch , learning so much.
Last edited by TomWitko (2009-08-23 15:05:33)Umm k looking into this and fixing this now. Went by the wiki page for the dell xps 1530 and it stated I needed the 65 driver, just figured out I have the 45 card so need the 45 driver. Will update later when I get it fixed.
K changed the driver and now can get wlan0 up ,, have to check out if everthing works now.
Last edited by TomWitko (2009-08-23 14:58:09) -
Satellite A200: Modem has an error 633: already in use or is not configured properly
My notebook is A200-FE0.
When I tried to make a dial-up connection, there is an error window says:
"Error 633: The modem (or other connecting device) is already in use or is
not configured properly".
When I test my modem by clicking query modem on the Diagnostics tab in the modems tool in
Control Panel, the modem responds normally and appear to be working
correctly.
When I test my modem by using the Toshiba diagnostic tools, it shows "pass" and I canhear the dail tone too.
I tired to uinstall and reinstall the driver twice.
But I just can't make a dial-up connection and keep getting the error 633. I am really upset about it.
Please help me! Thank you a lot!Thanks for the hint.
I tried this method too. I am using windows vista home premium. I can't find the files named telephon.ini and tapiini.exe in my computer.
I noticed that this method is only for windows 98 and windows ME. -
Xdm: sessreg not configured properly?
Hi All,
I've been experimenting with xdm recently and I've found that sessreg does not seem to be configured properly. When I login using xdm, no user sessions are recorded, using "w" or "last" reports that no one is logged in, even though I am logged in! If I revert to slim, it works fine, logins and logouts are recorded properly.
I've tried swapping the sessreg commands in /etc/X11/xdm/Xstartup and /etc/X11/xdm/Xreset with those in /etc/slim.conf, but it hasn't helped.
Does anyone else have this problem? Or a solution?
Thanks,
Robi can assure you that it works in lxdm,
> cat /etc/pam.d/lxdm
#%PAM-1.0
auth requisite pam_nologin.so
auth required pam_env.so
auth required pam_unix.so
account required pam_unix.so
session required pam_limits.so
session required pam_unix.so
password required pam_unix.so
session optional pam_lastlog.so
session optional pam_loginuid.so
-session optional pam_ck_connector.so nox11
cybertorture@freeman ~
> who
cybertorture pts/0 2011-11-29 00:57 (:0.0)
cybertorture@freeman ~
> lastlog
Username Port From Latest
root tty1 чт ное 24 16:45:11 +0200 2011
cybertorture tty3 вт ное 29 00:19:41 +0200 2011
Last edited by cybertorture (2011-11-28 23:21:56) -
Data Adapter is not configuring properly.....
I have created a BPEL process and added a DB adapter for polling a particular table.
and after this created a datasource with jndi name "eis/DB/DAMS" and Next in Weblogic server console --> Deployments --> DBAdapter --> Configurations --> Outbound Pool Connections --> create a new outbound pool connection with the name "dbadapterjndi".
Now update the "xADataSourceName" property of this connection pool with the JNDI name of the datasource created in the first step.
first thing is this is not updating in the server, its giving the message successfully saved and then update the deployment, i did after that also I am getting the following error.
==> CubeEngine deploy processDBAdapter/ProcessDBAdapterBPEL took 78 msecs
INFO: DeploymentEventPublisher.invoke Publishing deploy event for default/proces
sDBAdapter!1.0*soa_b79fa747-e7fe-4e12-8a0a-0fec5d5e319c
INFO: SSLSocketFactoryManagerImpl.getKeystoreLocation SOA Keystore location: C:/
Oracle/MIDDLE~1/USER_P~1/domains/URA_DO~1/config/fmwconfig/default-keystore.jks
INFO: SSLSocketFactoryManagerImpl.getKeystorePassword Obtained null or empty key
store password
INFO: SSLSocketFactoryManagerImpl.getKeyPassword Obtained null or empty key pass
word
INFO: SSLSocketFactoryManagerImpl.getSSLSocketFactory Could not obtain keystore
location or password
<Mar 24, 2011 6:11:55 PM SGT> <Warning> <oracle.soa.adapter> <BEA-000000> <JCABi
nding=> processDBAdapter JNDI lookup of 'eis/DB/DAMS' failed due to: weblogic.j
dbc.common.internal.RmiDataSource cannot be cast to javax.resource.cci.Connectio
nFactory>
<Mar 24, 2011 6:11:55 PM SGT> <Error> <oracle.soa.adapter> <BEA-000000> <JCABind
ing=> processDBAdapter Error while performing endpoint Activation: BINDING.JCA-
12561
JCA Resource Adapter location error (WebLogic).
Unable to locate the JCA Resource Adapter via .jca binding file element <connect
ion-factory/>
The JCA Binding Component is unable to startup the Resource Adapter specified in
the <connection-factory/> element: location='eis/DB/DAMS'.
The reason for this is most likely that either
1) the Resource Adapters RAR file has not been deployed successfully to the Web
Logic J2EE Application server or
2) the JNDI <jndi-name> setting in the WebLogic JCA deployment descriptor has n
ot been set to eis/DB/DAMS. In the last case you might have to add a new 'connec
tor-factory' entry (connection) to the deployment descriptor.
Please correct this and then restart the WebLogic Application Server
>
<Mar 24, 2011 6:11:55 PM SGT> <Error> <oracle.soa.adapter> <BEA-000000> <JCABind
ing=> processDBAdapter
BINDING.JCA-12561
JCA Resource Adapter location error (WebLogic).
Unable to locate the JCA Resource Adapter via .jca binding file element <connect
ion-factory/>
The JCA Binding Component is unable to startup the Resource Adapter specified in
the <connection-factory/> element: location='eis/DB/DAMS'.
The reason for this is most likely that either
1) the Resource Adapters RAR file has not been deployed successfully to the Web
Logic J2EE Application server or
2) the JNDI <jndi-name> setting in the WebLogic JCA deployment descriptor has n
ot been set to eis/DB/DAMS. In the last case you might have to add a new 'connec
tor-factory' entry (connection) to the deployment descriptor.
Please correct this and then restart the WebLogic Application Server
at oracle.integration.platform.blocks.adapter.fw.AdapterBindingException
.createJndiLookupException(AdapterBindingException.java:92)
at oracle.integration.platform.blocks.adapter.fw.jca.spi.ResourceAdapter
Locator.findResourceAdapter(ResourceAdapterLocator.java:140)
at oracle.integration.platform.blocks.adapter.fw.impl.AdapterFrameworkIm
pl.endpointActivation(AdapterFrameworkImpl.java:332)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpoi
ntActivation.performEndpointActivation(JCAEndpointActivation.java:621)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpoi
ntActivation.activateInboundJcaEndpoint(JCAEndpointActivation.java:604)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpoi
ntActivation.performActivation(JCAEndpointActivation.java:371)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceRevision.endpointActivation(AdapterServiceRevisio
nRegistry.java:585)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceRevision.activate(AdapterServiceRevisionRegistry.
java:440)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceRevision.setDefaultRevision(AdapterServiceRevisio
nRegistry.java:405)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceSeries.setDefaultRevision(AdapterServiceRevisionR
egistry.java:330)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceSeriesSet.setDefaultRevision(AdapterServiceRevisi
onRegistry.java:136)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry.setDefaultRevision(AdapterServiceRevisionRegistry.java:98)
at oracle.integration.platform.blocks.adapter.AdapterService.defaultRevi
sionChanged(AdapterService.java:311)
at oracle.integration.platform.kernel.WLSFabricKernelInitializer$2.proce
ssDefaultInSeries(WLSFabricKernelInitializer.java:464)
at oracle.integration.platform.kernel.WLSFabricKernelInitializer$2.run(W
LSFabricKernelInitializer.java:391)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run
(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManag
er.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
oracle.fabric.common.FabricDeploymentException: [JCABinding] [processDBAdapter.D
BAdapter/1.0]Unable to complete initialization due to: Endpoint Activation Error
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter was unable to activate the endpoint :{} due to the followi
ng reason: BINDING.JCA-12561
JCA Resource Adapter location error (WebLogic).
Unable to locate the JCA Resource Adapter via .jca binding file element <connect
ion-factory/>
The JCA Binding Component is unable to startup the Resource Adapter specified in
the <connection-factory/> element: location='eis/DB/DAMS'.
The reason for this is most likely that either
1) the Resource Adapters RAR file has not been deployed successfully to the Web
Logic J2EE Application server or
2) the JNDI <jndi-name> setting in the WebLogic JCA deployment descriptor has n
ot been set to eis/DB/DAMS. In the last case you might have to add a new 'connec
tor-factory' entry (connection) to the deployment descriptor.
Please correct this and then restart the WebLogic Application Server
Please correct the reported issue and redeploy the BPEL process.
: Endpoint Activation Error.
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter was unable to activate the endpoint :{} due to the followi
ng reason: BINDING.JCA-12561
JCA Resource Adapter location error (WebLogic).
Unable to locate the JCA Resource Adapter via .jca binding file element <connect
ion-factory/>
The JCA Binding Component is unable to startup the Resource Adapter specified in
the <connection-factory/> element: location='eis/DB/DAMS'.
The reason for this is most likely that either
1) the Resource Adapters RAR file has not been deployed successfully to the Web
Logic J2EE Application server or
2) the JNDI <jndi-name> setting in the WebLogic JCA deployment descriptor has n
ot been set to eis/DB/DAMS. In the last case you might have to add a new 'connec
tor-factory' entry (connection) to the deployment descriptor.
Please correct this and then restart the WebLogic Application Server
Please correct the reported issue and redeploy the BPEL process.
{rootCauses=[]}
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry.access$3600(AdapterServiceRevisionRegistry.java:68)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceRevision.endpointActivation(AdapterServiceRevisio
nRegistry.java:610)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceRevision.activate(AdapterServiceRevisionRegistry.
java:440)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceRevision.setDefaultRevision(AdapterServiceRevisio
nRegistry.java:405)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceSeries.setDefaultRevision(AdapterServiceRevisionR
egistry.java:330)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceSeriesSet.setDefaultRevision(AdapterServiceRevisi
onRegistry.java:136)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry.setDefaultRevision(AdapterServiceRevisionRegistry.java:98)
at oracle.integration.platform.blocks.adapter.AdapterService.defaultRevi
sionChanged(AdapterService.java:311)
at oracle.integration.platform.kernel.WLSFabricKernelInitializer$2.proce
ssDefaultInSeries(WLSFabricKernelInitializer.java:464)
at oracle.integration.platform.kernel.WLSFabricKernelInitializer$2.run(W
LSFabricKernelInitializer.java:391)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run
(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManag
er.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: BINDING.JCA-12517
Endpoint Activation Error.
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter was unable to activate the endpoint :{} due to the followi
ng reason: BINDING.JCA-12561
JCA Resource Adapter location error (WebLogic).
Unable to locate the JCA Resource Adapter via .jca binding file element <connect
ion-factory/>
The JCA Binding Component is unable to startup the Resource Adapter specified in
the <connection-factory/> element: location='eis/DB/DAMS'.
The reason for this is most likely that either
1) the Resource Adapters RAR file has not been deployed successfully to the Web
Logic J2EE Application server or
2) the JNDI <jndi-name> setting in the WebLogic JCA deployment descriptor has n
ot been set to eis/DB/DAMS. In the last case you might have to add a new 'connec
tor-factory' entry (connection) to the deployment descriptor.
Please correct this and then restart the WebLogic Application Server
Please correct the reported issue and redeploy the BPEL process.
at oracle.integration.platform.blocks.adapter.fw.impl.AdapterFrameworkIm
pl.endpointActivation(AdapterFrameworkImpl.java:511)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpoi
ntActivation.performEndpointActivation(JCAEndpointActivation.java:621)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpoi
ntActivation.activateInboundJcaEndpoint(JCAEndpointActivation.java:604)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpoi
ntActivation.performActivation(JCAEndpointActivation.java:371)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterService
RevisionRegistry$AdapterServiceRevision.endpointActivation(AdapterServiceRevisio
nRegistry.java:585)
... 11 more
Caused by: BINDING.JCA-12561
JCA Resource Adapter location error (WebLogic).
Unable to locate the JCA Resource Adapter via .jca binding file element <connect
ion-factory/>
The JCA Binding Component is unable to startup the Resource Adapter specified in
the <connection-factory/> element: location='eis/DB/DAMS'.
The reason for this is most likely that either
1) the Resource Adapters RAR file has not been deployed successfully to the Web
Logic J2EE Application server or
2) the JNDI <jndi-name> setting in the WebLogic JCA deployment descriptor has n
ot been set to eis/DB/DAMS. In the last case you might have to add a new 'connec
tor-factory' entry (connection) to the deployment descriptor.
Please correct this and then restart the WebLogic Application Server
at oracle.integration.platform.blocks.adapter.fw.AdapterBindingException
.createJndiLookupException(AdapterBindingException.java:92)
at oracle.integration.platform.blocks.adapter.fw.jca.spi.ResourceAdapter
Locator.findResourceAdapter(ResourceAdapterLocator.java:140)
at oracle.integration.platform.blocks.adapter.fw.impl.AdapterFrameworkIm
pl.endpointActivation(AdapterFrameworkImpl.java:332)
... 15 more
<Mar 24, 2011 6:11:56 PM SGT> <Error> <oracle.integration.platform> <SOA-20020>
<Deployment of composite "processDBAdapter" failed: [JCABinding] [processDBAdapt
er.DBAdapter/1.0]Unable to complete initialization due to: Endpoint Activation E
rror.
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter was unable to activate the endpoint :{} due to the followi
ng reason: BINDING.JCA-12561
JCA Resource Adapter location error (WebLogic).
Unable to locate the JCA Resource Adapter via .jca binding file element <connect
ion-factory/>
The JCA Binding Component is unable to startup the Resource Adapter specified in
the <connection-factory/> element: location='eis/DB/DAMS'.
The reason for this is most likely that either
1) the Resource Adapters RAR file has not been deployed successfully to the Web
Logic J2EE Application server or
2) the JNDI <jndi-name> setting in the WebLogic JCA deployment descriptor has n
ot been set to eis/DB/DAMS. In the last case you might have to add a new 'connec
tor-factory' entry (connection) to the deployment descriptor.
Please correct this and then restart the WebLogic Application Server
Please correct the reported issue and redeploy the BPEL process.
: Endpoint Activation Error.
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter was unable to activate the endpoint :{} due to the followi
ng reason: BINDING.JCA-12561
JCA Resource Adapter location error (WebLogic).
Unable to locate the JCA Resource Adapter via .jca binding file element <connect
ion-factory/>
The JCA Binding Component is unable to startup the Resource Adapter specified in
the <connection-factory/> element: location='eis/DB/DAMS'.
The reason for this is most likely that either
1) the Resource Adapters RAR file has not been deployed successfully to the Web
Logic J2EE Application server or
2) the JNDI <jndi-name> setting in the WebLogic JCA deployment descriptor has n
ot been set to eis/DB/DAMS. In the last case you might have to add a new 'connec
tor-factory' entry (connection) to the deployment descriptor.
Please correct this and then restart the WebLogic Application Server
Please correct the reported issue and redeploy the BPEL process.
.>
INFO: SSLSocketFactoryManagerImpl.getKeystoreLocation SOA Keystore location: C:/
Oracle/MIDDLE~1/USER_P~1/domains/URA_DO~1/config/fmwconfig/default-keystore.jks
INFO: SSLSocketFactoryManagerImpl.getKeystorePassword Obtained null or empty key
store password
INFO: SSLSocketFactoryManagerImpl.getKeyPassword Obtained null or empty key pass
word
INFO: SSLSocketFactoryManagerImpl.getSSLSocketFactory Could not obtain keystore
location or password
==> CubeEngine deploy SchedulerProject/SchedulerBPELProcess took 172 msecs
INFO: DeploymentEventPublisher.invoke Publishing deploy event for default/Schedu
lerProject!1.0*soa_07eeda8d-196a-4174-81ee-05589086d5f2
INFO: SSLSocketFactoryManagerImpl.getKeystoreLocation SOA Keystore location: C:/
Oracle/MIDDLE~1/USER_P~1/domains/URA_DO~1/config/fmwconfig/default-keystore.jks
INFO: SSLSocketFactoryManagerImpl.getKeystorePassword Obtained null or empty key
store password
INFO: SSLSocketFactoryManagerImpl.getKeyPassword Obtained null or empty key pass
word
INFO: SSLSocketFactoryManagerImpl.getSSLSocketFactory Could not obtain keystore
location or password
==> CubeEngine deploy Registrationupload/RegistrationUploadBPELProcess took 531
msecs
INFO: DeploymentEventPublisher.invoke Publishing deploy event for default/Regist
rationupload!3.0*soa_7a4793e2-dab1-4d3f-b4a9-f6050dfda617
INFO: SSLSocketFactoryManagerImpl.getKeystoreLocation SOA Keystore location: C:/
Oracle/MIDDLE~1/USER_P~1/domains/URA_DO~1/config/fmwconfig/default-keystore.jks
INFO: SSLSocketFactoryManagerImpl.getKeystorePassword Obtained null or empty key
store password
INFO: SSLSocketFactoryManagerImpl.getKeyPassword Obtained null or empty key pass
word
INFO: SSLSocketFactoryManagerImpl.getSSLSocketFactory Could not obtain keystore
location or password
==> CubeEngine deploy Registrationupload/RegistrationUploadBPELProcess took 282
msecs
INFO: DeploymentEventPublisher.invoke Publishing deploy event for default/Regist
rationupload!1.0*soa_562b243b-bf72-41d6-8fc3-76777af5c1e9
looking up version 11.1.1.3.0
SchemaVersion actual dbVersion=11.1.1.3.0, expected dbVersion=11.1.1.3.0
INFO: FabricProviderServlet.stateChanged SOA Platform is running and accepting r
equests
please suggest and if my steps are wrong, then please guide me too.\
thksMe too. I'm trying to setup an FTP Listener. As soon as I edit the Deployment Descriptor (with the FTP Server settings) and save it to a new DD file I get the same message.
Something isn't linking up. I do note that there is not an explicit setting for <jndi-name> in the DD, except within the Variable Declarations. Does anyone know where that should be included? I don't see it in any other DDs (that work), but they're not setup for Listening either... -
Desktop software. serial port not configured properly
i cant seem to configure my serial port. actually i just dont know how.....ive went into serial setting but i cant seem to find a port number. it doesnt detect anything.....????? can someone with some patience pleeeeeeeese help me. thx alot
Port is supposed to be auto detected!! Have you tried detecting the port manually by going to connection settings and pressing detect button ? Which version of desktop manager your're using?
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
Repeat processing does not work properly - label printing MB90
Hi,
I created a custom label for 261 & 262 movement types. For this i created a custom page formats and needed settings.
The system seems to behave strange. when i try to print from MB90 for processing mode 1. The form output is as desired.
But when i try to repeat processing for previously processed item, it doesn't show the font size and all properly.
I tried to debug, everything is fine, triggers right form, infact i debuged the form also its the correct one. But does'nt show output properly.
Also for the new data whne i process and do repeat proecessing print it works...
Why it does not work for existing data in the system? Why it is behaving strange when it picks up same form.
Regards,
Lalit Mohan Gupta.This was because... the output type configuration was changed to different printer.
And that printer was not configured properly...
Regards,
Lalit Mohan Gupta. -
Error 610 Database location policy is not configured.
Hello,
I'm running ZENworks 6.5 sp1(a).**I*have*an*Inventory*Service*object **called
"Inventory Service_servername".**Should*I*be*renaming*t his*to*the*older
configuration (which I don't have anymore) or try to configure it as is.
startinv no longer will start inventory.**I*had*this*working*since*the
upgrade (a long time ago) but it's no longer working.**I*had*checked*a
number of the TID's on this error but I have not been able to resolve the
problem.**Please*tell*me*where*I*should*be gin*to*look.
Thanks in advance, OksanaIt's now fixed. Looks like it was configured both in the Server Package and
the Service Location Policy, so I removed the settings from the Server
Package, and voila it works!
Oksana wrote:
> With debugging increased:
>
> 12/9/05 12:55:55.537] ZENInv - Server Config: getAttributes of DB Loc.
> Policy returned: 104
> [12/9/05 12:55:55.537] ZENInv - Server Config: DB Location Policy not
> configured properly...
> [12/9/05 12:55:55.537] ZENInv - Server Config: The
> getConfigurationFromDirectory() returned610
> [12/9/05 12:55:55.639] ZENInv - Server Config: Inv Server not configured
> properly. Error code: 610
> [12/9/05 12:55:55.639] ZENInv - Server Config: Error Type 15 Error 610
>
> and later on
>
> [12/9/05 12:55:55.927] ZENInv - Status Reporting: Number of modified
> [records
> are: 0 for DN=CN=Inventory Service_BOREALIS.OU=ARDELT.O=FACS
> [12/9/05 12:55:55.927] ZENInv - Server Config: Error Type 15 Error 610
> [12/9/05 12:55:55.927] ZENInv - Server Config: clearScope() return value 1
>
>
> The db location is specified, so I'm not sure what the problem is, maybe
> the
> correct rights to acces the db aren't in place. Everything else seems to
> be working.
>
> TIA, Oksana
>
> Marcus Breiden wrote:
>
>> On Fri, 02 Dec 2005 16:30:27 GMT, Oksana wrote:
>>
>>> We installed sp1 before sp1a came out and I fixed it and it has been
>>> working
>>> since. However, recently it is not working and I'm not sure why.
>>
>> in that case I would enable debug logging for inventory and take a look
>> at the log file..
>>
>> Try enable debugging....
>>
>> http://www.novell.com/documentation/...rts/zdprts.pdf -
"Error: PLL is not configured on Oracle server." appears on some computers
Hello,
We configured the custom.pll file so that we can capture UPK with context IDs.
We can capture UPKs just fine and it records all available context IDs on MOST computers. However, we have a couple of people that get the custom.pll error (Error: PLL is not configured on Oracle server.), and obviously, their UPK captures do not capture the context IDs.
We all use the same version (UPK Client 3.6.1) and we all are capturing in the same instance where custom.pll has been configured.
Why are some computers getting the error?? How can we resolve this error?
Can somebody help?
Here are some of our specs:
UPK: Client 3.6.1
EBS: 12.1.2
Computer: Windows XP Professional SP3
Thank you.Hello,
You are correct that the document describes configuring the PLL for help menu integration, but it is necessary that this configuration be done before recording, which is why you're seeing the messages. We do not want customers to record content and later find out that the PLL was not configured properly for deploying via the help menu.
If you follow the steps in this document, the error messages should go away.
I hope this is helpful.
Best regards,
Marc -
Hi All BI Experts,
I need your advice for the follwing issue.
My company does not have portal connection . We have BI7.0 SP16.
Portal is not configured properly. What are the pre requisite to configure portal.
We use cognos portal for our web reports. Now we want to use BI portal instead of cognos portal.
We want to use Web Application Designer and BEx broadcaster.
We have already installed WAD, Report Designer and Broadcater but due to portal error we are not being able to use those.
Thanks in advance.
RaghuHi,
Take a look at for BI java configuration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/004e5f27-374b-2b10-4da9-894986fd04c7
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00c4742a-3a4b-2b10-b4ae-b03d08bcde6e
Regards.
Maybe you are looking for
-
Get Best Practice materials of RE-FX with wrong
Hi, Dear guys, Now I am going to download the Best Practice materials of RE-FX, you know, in the page http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm (Industry: Professional Service, Country: Germany, then choosing hit list from D89~
-
Command-F not working in Safari
All of a sudden, command-F (find) stopped working in Safari (5.1.7). Choosing Find from the Edit menu works fine. I checked the keyboard shortcuts in Systems Preferences, and there is nothing for command-F. Is there anywhere else to look? Thanks.
-
Does iTunes duplicate mp3 files I import, thus doubling space used on mac?
Hello. May be a silly question, but here goes: When I import mp3's onto my mac (from my old computer), i put them all into one folder.. when i double click to play, they automatically play through itunes.. now i've noticed that itunes NOW ALSO create
-
Text is overriding above layer
I have text in layer one (bottom) and i have a tooltip widget in the top layer, and the text from layer one is overriding the tooltip widget? What is going wrong?
-
I have installed a new tri-colour cartridge (original HP product) and it works fine. However, having printed the alignment sheet I tried to scan it as instructed but was told that the alignment sheet could not be detected. However, as the printer is