"resource not loaded" message
Hello!
I´ve a library that was implemented on LabView 5.1 and it worked fine.
Then, one day, i tried to open this library using LabView 7, and it
worked as well, but now, whenever i try to open the program using
LabView 5.1 it pops up a "resource not loaded" message.
Well, i´m lost... any help will be appreciated.
Thank you,
Luanna
Hi osu7582, and a warm welcome to the forums!
Did it ever work on the iBook?
Is it IMAP or POP account?
Open Activity Monitor in Applications>Utilities, how much Memory free & Hard Disk space does it show?
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup
Similar Messages
-
Bridge Messages will not load messages after 1.0.6.2390 upgrade
After I updated to 2390, messages will not load, after about 5 minutes it will display content of last message but left side message list will not populate. I just keep giving me the GREEN CIRCLE WAITING and will not load messages. This is the first time I've had any problems with bridge messages. All the other bridge apps (calendar, notes, contacts, bridge browser) all work. I un-installed bridge from my phone (ver 1.0.0.93) and re-installed it, still no luck. I re-booted PB, no luck. Is anybody else having a bridge message problem since 1.0.6.2390 update.
tboyd wrote:
Knottyrope, I deleted all bluetooth profiles, phone and PB, did battery pull on phone, playbook reset. paired phone with PB and after 8 minutes I can see the header of 1 email message and under the All messages list on left side it is blank and the GREEN CIRCLE of WAITING is still spinning.
Calender works, contacts works, Bridge browser works, bridge files works, but bridge messages will not load.
I never had any problem with bridge messages working through all the previous OS upgrades.
If you did all of that, then maybe there is an issue we cant help with, please call support to get your PlayBook logs, so RIM can address it in a future release or maybe they have a fix we dont know about.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
"Prop bitmap dll not loaded" message when printing PDF
Getting "Prop bitmap dll not loaded" message when printing PDF. Message started occuring after Adobe Reader upgrade to version 11.
Windows XP
Lexmark P6250 printer
Firefox v17.0.1
Adobe Reader v11.0.0
Thanks;
PaulCan you try to install the latest Lexmark printer driver (http://support.lexmark.com/index?segment=SUPPORT&userlocale=EN_US&locale=en&productCode=LE XMARK_P6250&page=product).
If that does not help, see this thread http://social.technet.microsoft.com/forums/en/officesetupdeploylegacy/thread/6bdf9d5d-1b14 -4789-b6ee-3aff66889f42 -
Why isnt my godaddy imap email not loading messages?
Why isnt my godaddy imap email not loading messages?
I'm having the same issue, but slightly different - since upgrading to Mountain Lion the Inbox folder doesn't come across. If I right-click on the account and select "Get Account Info", the 'Inbox' folder does not appear in the Mailbox list. I've got a support email into GoDaddy but haven't heard from them yet.
Hey - sorry - I just realized this is an iPhone discussion group. Can't figure out how to delete this post.
Message was edited by: Chuck Konfrst -
I get the "Fast Browser Plugin not loaded" message every time I run Safari and I can't find an MTWB folder anywhere on my hard drive? This doesn't seem to be causing a problem, but is a puzzle?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
HT1689 featured tab in app store not loading , message says not available in Uk
the featured apps will not load ,message says not available in UK.
I have tried changing the date and turning off automatic timeI already started a thread about this. https://discussions.apple.com/thread/3540913?tstart=0
I'm experiencing the same issues. If I log OUT of the store...everything works ok. Log in and can see nothing. -
"load code resource" not loading code
After fighting a long time, finally have a .lsb file.
I use "Load code resource" and don't receive an error nor acknowledgement. Running the vi comes back with "Object code is not loaded" on that block.
If it didn't accept the code, I wish LabView would put up a message of why it couldn't. Or even a prompt confirming the code loaded if it did load.
Note: I am using an evaluation version while LabView is being purchased. Is this why I can't load code?I did encounter the same problem, where there was no error message but
it was not actually loading my code. I just tried creating my DLL
in Visual C++ 2003 (I don't have 2005 on my machine) and everything
working fine in LabVIEW. I followed the instructions found on
pages 3-15 and 3-16 of the Using External Code in LabVIEW document,
which I have linked below:
Using External Code in LabVIEW
I found that I could cause my LSB to fail to load if I skipped step 10
in this document, where you specify the path to the Module Definition
File. Verify that you have made this change (and all the others
in the procedure), and let us know how it works. -
Got latest version of firefox - can no longer print Prop res DLL not loaded message
Several weeks ago I clicked to update to the latest version of firefox.
Now when I try to print a page from something on the internet I get a message that says Prop Res DLL not loaded. How do I fix it?Do you have a Lexmark printer?
*[[/questions/816793]]
Copy the Lexmark printer DLL file(s) (LX??PRPR.DLL) from the C:\Windows\System32\Spool\Drivers\W32X86\3 folder to the System32 folder -
Is there anybody out there who is receiving these errors.
Please help!!! (I use a lot of layers and I dont know if that has
anything to do with them) I am just going to past the email I sent
to tech support:
ANY ADVICE THAT YOU CAN GIVE WOULD BE GREATLY APPRECIATED!!
When I open dreamweaver or anypage of any site I get the
following message:
the following translator were not loaded due to errors
ASP.htm has configuration information that is invalid. Coldfusion
has configuration information that is invalid. XSLT has
configuration that is invalid.
also when try to save it I am getting a message that says:
While executingon Loadin before save htm. A java script error
occured.
I am using layers on one site but they are named properly. I
have downloaded updates 8.01 and 8.02. Ive been using dreamweaver
for several weeks and this just popped up today???This TechNote should solve it:
Troubleshooting JavaScript errors in Dreamweaver > Delete
the FileCache.dat
file
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19105#dat
Hope this helps,
David Alcala
Adobe Product Support -
When trying to view a Flash image a blank blue square appears . If you right click on the blue square it show the message 'Movie not loaded'.
Does that happen with all Flash object or only on that specific page?
It is possible that there is a problem with the code or that hotlink protection via the referrer is used.
Can you post a link? -
Unable to print PDF files since update. Get "prop res DLL not loaded" message
Unable to print PDF files since update. Get "prop res DLL not loaded" message
This problem has been reported to occur with certain Lexmark and Dell printers. These printers include the following:
Lexmark Z700-P700
Lexmark X1180
Lexmark X1170
Lexmark X1150
Lexmark P706
Lexmark Z25
Dell A940 (Personal All-in-One)
Microsoft has several possible solutions here
http://support.microsoft.com/kb/918730 -
Flash form to email not loading message body
I'm creating a form in Flash for a client's website to make
online reservations. I've been experimenting with asp scripts and
found two that work fine, except that the body of the email won't
load. The emails come through fine, but blank.
Since it's the same with both asp scripts I suspect the prob
is in the AS but I've been looking at this and tweaking and
experimenting for four days now. Any help will be appreciated.
Here's one of the asp scripts:
<%
strToEmail = "[email protected]"
strToName = "Gerry Mooney"
strToSubject = "LPReservation Request-tomailscript"
Set Mailer = Server.CreateObject("CDO.Message")
'Mailer.RemoteHost = "mail.yourdomain.com"
strName = Request.form("name")
strEmail = Request.form("fromEmail_txt")
strMesg = Request.form("firmName_txt")
strBody = strMesg
'Mailer.FromName = strName
Mailer.FromAddress = strEmail
'Mailer.AddRecipient strToName, strToEmail
Mailer.Subject = (strToSubject)
Mailer.BodyText = strMesg
if Mailer.SendMail then
Response.Write "_root.status_txt.text=Your message has been
sent. Thank you."
else
Response.Write "_root.status_txt.text=Error: Fail to sent
your message."
Response.Write Mailer.Response
end if
%>
And here's the AS:
var email_lv:LoadVars = new LoadVars();
//this function is called when email_lv loads the server-side
script.
email_lv.onLoad = function(success) {
//If the script was successfully loaded, this condition is
run
if (success) {
/* Though the server-side script was loaded, it does not
mean it was
executed successfully. This condition gets a response from
the
server-side script and determines if it was truly
successful. */
if (this.server_mes == "ok") {
status_txt.text = "Email Sent";
/* You can add additional code here. This is only run
if everything went as planned. */
} else {
//email failed to send, but script did load. Likely a server
issue.
status_txt.text = "Email Failed";
/*This is the onRelease function for "submit_btn" button.
This is only run
if the button was pressed. */
submit_btn.onRelease = function() {
/* Here we are validating the data. This insures the email
address contains
both the "@" and ".", If not, it stops the script and alerts
the user. */
if (!fromEmail_txt.length || fromEmail_txt.indexOf("@") ==
-1 || fromEmail_txt.indexOf(".") == -1) {
status_txt.text = "Invalid Email";
//This validates the subject line contains text
} else if (!subject_txt.length) {
status_txt.text = "Missing Subject";
//This validates the message body contains text
} else if (!firmName_txt.length) {
status_txt.text = "Missing Firm Name";
//This validates the check in date
} else if (!checkIn_txt.length) {
status_txt.text = "Missing Check-in Date";
//If everything is filled out correctly, this is run.
} else {
//Collects the data from the text boxes and gives it to
email_lv
email_lv.fromEmail_txt = fromEmail_txt.text;
email_lv.subject_txt = subject_txt.text;
email_lv.firmName_txt = firmName_txt.text;
email_lv.checkIn_txt = checkIn_txt.text;
/* Finally, send the data to the server and get a response.
As mentioned above, serverlang holds the file extendion for
the server side language. You can hard code the complete
file name. */
email_lv.sendAndLoad("tomail_mytest.asp", email_lv, "POST");
Any suggestions will be appreciated. Thanks!More Information:
--Deleted EAS account
--Then did a Palm Backup
--Then did a Partial Erase
--Then (re) Add the EAS account
--Then it synchronized
--Now I can see the message body for "High Priority" emails but not any others...
Suggestions? Help? Thank you. -
Help! Resources not loaded.
I am trying to run a "thin" client that interacts with a server through EJB with WebStart. I get the application to start, but unfortunately none of the resources (config files, icons etc.) load. What is the easiest way to get the program to run closely or the same as it runs as a standalone application? The resources are are included in the jar file structure, and ./data/images/ is the path from the classes to the images still. If there is a way to get this to work without changing much or any code, that would be best.
Thank you,
JeffWell, you'll have to load your resources like this:
URL u = this.getClass().getClassLoader().
getResource("relative/from/root/of/jar/path/to/fresource/file");
// "this" has to be a class which was loaded from the same jar as your resource, if you're using multiple jars/extensions.
// or ...AsStream, whatever.AND if you're using JRE 1.3.0_02 or _03, it might not work anyways, and it especially won't work if it's loading it from the local filesystem, even with JRE 1.3.0_01, which Sun has reverted to packaging with WebStart 1.0.1_02.
Weeee! -
An attempt to change the "Properties" options prior to printing on my Lexmark X5150 causes the message. Same does not occur if I do the same under Internet Explorer.
I have tried creating the profile again and still get the same problem. The problem is machine based and not user based.
Hi GG1234,
If you recreated the Outlook profile and still got the same problem, please try to recreate the Windows Profile:
Log on to client using local admin account->rename the profile folder under c:\users.
By the way, did you try to print the mails in OWA?
Frank Wang
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
PI7.1 - Resource Not Found - Message Mapping
Hi,
We have transported one software component objects from Dev system to QA system.
The IR and ID objects transported successfully.
The SWCV consist of one namespace, imported idocs, datatype,msgtype,service interface,msg-mapping,operation mapping - we are using PI7.1.
The scenario is R/3 --> PI7.1 ---> Sql-Server.
The QA is recently configured and this is the first transport we did.
The problem we are facing is when the R/3(QA) system sends idocs it fails at PI msg-mapping.
The error is :
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">RESOURCE_NOT_FOUND</SAP:Code>
<SAP:P1>88b619e0-b4ec-11dd-8914-fd220a9b803a</SAP:P1>
<SAP:P2>http://abc.com/pi/sbasu/saptosql</SAP:P2>
<SAP:P3>com/sap/xi/tf/_MM_SYPM_BlendRecipe_WCD_To_WLS_.cl~</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Unable to find resource 88b619e0-b4ec-11dd-8914-fd220a9b803a in the following software component versions: http://abc.com/pi/sbasu/saptosqlcom/sap/xi/tf/_MM_SYPM_BlendRecipe_WCD_To_WLS_.cl~-1</SAP:Stack>
I have imported the inbound payload and generated a test instance - the mapping executed successfully.
Can anyone have any idea why the problem occurs and what could be the solution ?
Regards,
SanjibHi,
Close the duplicate thread and check the link
Re: PI7.1 stack 6 - RESOURCE_NOT_FOUND
Thanks!
Maybe you are looking for
-
New Airport Extreme802.11n &Very Odd Network&Computer Issues
Hi, We Replaced a D-Link DGL4300 802.11G and a Airport Express M9470LL/A with the most current Airport Extreme Base Station 802.11N 2.4Ghz and 5.0Ghz Dual Band and a Airport Express 802.11N (to use with a Shared USB HP1022 Laser Jet Printer. I have c
-
How do I imbed html in iweb?
I need to imbed a few html codes into my website. I cannot for the life of me figure out how to do this. Can someone give me lesson for dummies in a short reply? So much appreciated!
-
Menu button on v29 keep clashing the Firefox
Installed v29 and notice couple of issues. First, whenever I press the new menu button on the top right corner, it clashes/closes the Firefox (as if it's a close (X) button). 2nd thing I've notice is that with multiple tabs open on the last/bottom ro
-
RTX 4088 not ringing when called using online numb...
I have read a lot of posts some with solutions( that don't work) and others stating that this is a known skype issue. Firstly i have just bought my second cordless phone, RTX 4088, nice phone but wont ring when anyone rings me on my online number. Th
-
Troubles with ADF Faces forms with UTF-8
Hello, When I submit form the special characters in input fields turn to strange chars. my JSP encoding is UTF-8, environment and compiler of JDeveloper is set to UTF-8. what might be wrong? thanks, Branislav