Resource Object - Add Custom Status

Hi All,
When I add a custom status in a resource object and map it in my process task the UI does not display it when the resource has been provisioned successfully. The resource is displayed in the User in status null. Has anyone add custom status in a resource object and use it?
Thank you in advance,
Kostas

I suppose we should add the description of the new resource status in some Resource Bundle or some properties file....
Anyone that can suggest any action...?

Similar Messages

Issue in Adding Custom Status Defnition for a resource object

Hi,
We have installed OIM and patch it to 9.102. We have created one custom resource object (flat file connector) for reconciliation. As part of requirement we need to define three status for this resource object - Enabled, Suspended and Disabled. As Enabled and Disabled status are available OOTB, i have added 'Suspended' status under the Status Definition in resource object. Now the issue is that if we are passing reconcile user status to either Enabled or Disabled, the status is changing fine on Linked user resource object. But if the status passed as 'Suspended' the resource account status of linked user (OIM) is not changed.
We have mapped the resource side Status attribute to OIM_OBJECT_STATUS under process definition. I also made the entry 'Suspended' in 'Lookup.Object Object Status' lookup to see if any help, but no luck.
The 'Suspended' status is successfully added in OST table against the object key and on manually updating the status key against the resource object it is reflecting 'Suspended' status through admin console. User-->Resource Profile
Does anyone have any clue if the requirement is correct (adding a custom object status) and so, where i am going wrong. Thanks in advance.

A quick doubt..If i have written down a process task and calling this on completion of 'Reconciliation Update Received' and in this process task , a adapter is attached which is updating the resource account status (ost_status) on the basis of some custom attributes. This task is working fine and updating the status. But the issue is that once this task is complete, the mapping in Process definition (loginDisabled <MetaDirectory> --> OIM_OBJECT_STATUS) overrides the status.
Per my understanding the flow is going like this-->
1. Reconciliation run
2. Event Linked
3. Reconciliation Update Received
4. Call The custom Task --> Update the OST Status
5. Update the OST Status per the mapping OIM_OBJECT_STATUS.
Is there any way we can implement that the status update in (5) occurs before (4) so that my custom task status can override the (5) as per my business requirement.

How can I get the value of a custom property from a resource object?

I am trying to get the value(s) of a custom property, called "status" within a method. The method has an object of type IResource available to it.
I have tried the following:
PropertyName propName = new PropertyName("","status");
value = res.getProperty(propName).toString();
However, I am getting a NullPointerException when I try to create the PropertyName instance.
Is there a better way to get the value of a specific property from a resource object?
Thanks,
Tom

Thanks Praveen.
I was missing the default namespace of "http://sapportals.com/xmlns/cm" - I thought I could just pass an empty string for the namespace, but it looks like I must always specifiy, even if it is default.
Tom

Error while changing the Resource Object Status

Hi,
I am trying to change the resource object status from Waiting to Provisioned for a self service task. Before approval I see the Resource Object Status as " Ticket Sent To REMEDY" on the administrator's web console and at the Requestor's web console I get the following error message-
???en_US.global.viewProfileForm.Lookup.Ticket-Sent-to-REMEDY???
But after approval, based on the completion the task, the process on both the consoles is set to provisioned. That is what I want to display but the problem comes when the requestors sees the error status message on its console before approval.
Can any body tell me the reason of the above error and how to resolve it?
Thanks in advance

do you have any custom written event handlers getting triggered off after request submission or during approval?
It might also be due to either a browser issue or you might have missed any entry in the xladmin properties file for a custom label/error message etc.

How can i add custom attributes to a new Class Object using the API ?

Hello everyone,
Here is my problem. I just created a subclass of Document using the API (not XML), by creating a ClassObjectDefinition and a ClassObject. Here is the code :
// doc is an instance of Document
ClassObject co = doc.getClassObject();
ClassObjectDefinition cod = new ClassObjectDefinition(ifsSession);
cod.setSuperclass(co);
cod.setSuperclassName(co.getName());
cod.setName("MYDocument");
ClassObject c = (ClassObject)ifsSession.createSchemaObject(cod);
Everything seems to be OK since i can see the new class when i use ifsmgr. But my question is : how can i add custom attributes to this new class ? Here is what i tried :
AttributeDefinition value = new AttributeDefinition(ifsSession);
value.setAttribute("FOO", AttributeValue.newAttributeValue("bar"));
c.addAttribute(value);
But i got the following error message :
oracle.ifs.common.IfsException: IFS-30002: Unable to create new LibraryObject
java.sql.SQLException: ORA-01400: impossible d'insirer NULL dans ("IFSSYS"."ODM_ATTRIBUTE"."DATATYPE")
oracle.ifs.server.S_LibraryObjectData oracle.ifs.beans.LibrarySession.DMNewSchemaObject(oracle.ifs.server.S_LibraryObjectDefinition)
oracle.ifs.beans.SchemaObject oracle.ifs.beans.LibrarySession.NewSchemaObject(oracle.ifs.beans.SchemaObjectDefinition)
oracle.ifs.beans.SchemaObject oracle.ifs.beans.LibrarySession.createSchemaObject(oracle.ifs.beans.SchemaObjectDefinition)
void fr.sword.ifs.GestionDocument.IFSDocument.createDocument(java.lang.String)
void fr.sword.ifs.GestionDocument.IFSDocument.main(java.lang.String[])
So, what am i doing wrong ?
More generally, are we restricted in the types of the attributes ? (for example, would it be possible to add an attribute that would be an inputStream ? Or an object that i have already created ?).
Any help would be appreciated. Thanks in advance.
Guillaume
PS : i'm using Oracle iFS 1.1.9 on NT4 SP6 and Oracle 8.1.7
null

Hi Guillaume,
you're welcome. Don't know exactly, but assume that ATTRIBUTEDATATYPE_UNKNOWN
is used to check for erronous cases only
and it shouldn't be used otherwise.
Creating your own objects could be simply done via
ClassObject ifsClassObject;
DocumentDefinition ifsDocDef = new DocumentDefinition(ifsSession);
// get class object for my very own document
ifsClassObject = ClassObject.getClassObjectFromLabel(ifsSession, "MYDOCUMENT");
// set the class for the document i'd like to create
ifsDocDef.setClassObject(ifsClassObject);
// set attributes and content for the document...
ifsDocDef.setAttribute("MYFOO_ATTRIBUTE",....);
ifsDocDef.setContent("This is the content of my document");
// create the document...
PublicObject doc = ifsSession.createPublicObject(ifsDocDef);
null

New Resource Object Status

Hello all,
a. When you disable a user on OIM it disables all resources which are Provisioned or Enabled for that user
b. When you enable a user on OIM it enables all resources which are Disabled
My client would like to put in a new status for the Resource Object called Blocked.
If the Resource is Blocked it should not follow the status as described on a. and b.
I've done the following test:
I've created the new status Blocked for a given Resource Object
I've created a new Process Definition Task called Block User and i switch the status to Blocked when it completes
All good so far, but when the user is disabled on OIM it changes the status of my Blocked Resource to Disabled as well.
Is there any way i can tweak OIM to avoid this?
I (my client) would like the Blocked Resource to remain Blocked until a manual operation changes its status.
Thanks for any input.
Adriano.

Well,
My client gave up on the requirement, so i will not implement it anymore.
But, i think the solution proposed by user12840707 would work just fine.
In fact, It gave me another idea. I believe it can be done without touching java code. (almost)
General thoughts:
1 . Normally, the Enable User task on a Process Definition has the Task Effect property assigned to 'Enables Process or Access to Aplication'
2 . Change it to 'No Effect'
3 . Modify the current Enable User task to call an adapter that will check the status of the Resource.
4 . Based on the reponse of this task, you can call another task, lets say: Really Enable User, that will really perform the Enable User.
It is sort of cumbersome but, anyway, thanks for sharing your thoughts.
Adriano

OIM 11gR1: Add a Task to a Resource Object

Hello
I have added a new process task to a Resource Object. Task name is "Change Unique Value" on the RO. I'd like to programatically add this task to all users where the RO is either "Enabled" or "Provisioned"
I cannot seem to find an 11g API that allow me to find all resources provisioned to a user, and then find all available tasks, and add it.
Can someone please point me to the API that will allow me to add a task to an RO?
Thank you.

tcProvisioningOperationsIntf.addProcessTaskInstance(long plTaskKey, long plOrcKey)
Run this query for the task key:
select mil_key from mil where mil_name = 'Change Unique Value'
Then run the query to get the orc_key
select oiu.orc_key
from oiu, ost, obj, obi
where oiu.ost_key=ost.ost_key
and oiu.obi_key=obi.obi_key
and obi.obj_key=obj.obj_key
and obj.obj_name = :resourceName
and ost.ost_status in ('Provisioned','Enabled'))
Then use this code and put a comma seperated value of the orc_key output.
public void addProcessTask(){
long[] keys = new long[] {<COMMA_SEPERATED_ORC_KEY};
int counter = 0;
for (long key:keys){
try {
counter++;
provIntf.addProcessTaskInstance(<MIL_KEY FROM ABOVE>, key);
System.out.println(counter + "|" + keys.length);
} catch (Exception e) {
System.out.println(e.getLocalizedMessage());
System.out.println(e.getMessage());
Verify with one user first, then run the rest. It uses the tcProvisioningOperationsIntf.
-Kevin

Need to add new status to the resource

Please let me know how can I add the new status to the resource record in resource maintenance screen.

Ok Thanks for the reply
Is it possible to create the copy of that activity (Resource Maintenance)
and add the status as required?
And use this copy instead of standard Resource Maintenance?
Please suggest?
Thanks

Resource Object Status

Hi,
OIM is not properly updating the Resource object status. I need to find out the actual status value in dev_oim schema. Can you please let me in which table we can find the Resource object status?
Thanks

Hi,
According to my understanding RO will be associated with some Task. So open --> Process Definition find out that Task --> Open Task and navigate to Task to object status tab --> and there u can map the status.
Regards,
Newbie

API of Resource object managment - OIM 11g R2

Hi All,
I want to provision a resource (say 'AD User') from a post event handler (OIM 11g R2) during user creation.
Please tell me the API to be used.
In OIM 10g, we can use 'tcObjectOperationsIntf' interface to operate on resource objects. what API is its replace in OIM 11g R2?
Thanks in Advance.

Create a role and add a rule membership to that role using your custom attribute.
Create an access policy to provision AD resource and use the role created above while creating access policy. There will be a schedule task with the name "Evaluate user access policies". Change its schedule to run for every 1 minute.
Now, create a user who satisfies the above role membership and make sure this user got the role membership. Immediately after a minute, this new user should be provisioned to AD resource automatically.

Using Xellerate User as trusted Resource Object - 11G Release 2

Hi all,
I want you use Xellerate User as trusted Resource Object for trusted reconciliation. From design console I try to add my custom attributes to this RO, but when I try to save I get error that it is not permmited.Is this a kinda bug or in Release 2 something has changed and I must define new trusted RO? Any help is strongly appreciated..
BR,
Aliye

There is a checkbox "Trusted Source" on the Resource profile. You can select this check box if you want to use the resource object for trusted user reconciliation. By default, this check box is not selected. It is selected by default only for the Xellerate User resource object. Since Xellerate User resource object is OOTB and very critical, it is recommended to use a different dedicated resource for simply used as Trusted Resource Object....
Details can be found in *11.9.4 Resource Objects Form*
http://docs.oracle.com/cd/E21764_01/doc.1111/e14309/resmgt.htm#CBBFAIEC

Add Custom Field not to all Incidents but in specific IR,SR template

Hello, Dear Colleagues.
With this manual:
Adding a Custom Property to a Form – Support Group Property for Problem Form Example, I have added similarly custom field List Picker to Incident Form.
But now this custom field is default field for all new incident. How can I add custom field just in specific incident request or service offering (for example, Printer Repair service offering for Self-Service portal).
Thanks.
Have a nice day.

You're certainly on the right track, this comes down to TypeProjections -
something you'll absolutely want to start getting familiar with. I was about to start typing a quick post when I found a related said post exists out on the interwebs (https://dynamicdatacenter.wordpress.com/2012/10/03/add-custom-service-request-forms-in-servicemanager2012/).
So, you can do it manually or you can create a relationship and this XML gets built for you. It certainly makes it a bit easier in terms of XML hacking when you're getting started too (i.e. copying and pasting the relationships)
That said, I built a version of your management pack including a relationship (Configuration Item -> Printers) so you can get back to building and spend less time troubleshooting some of these quirks. You can copy and paste the following to an XML file,
seal it to make it an MP and then bundle to a MPB with the ServiceRequestForm dll.
<ManagementPack ContentReadable="true" SchemaVersion="2.0" OriginalSchemaVersion="1.1" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Manifest>
<Identity>
<ID>BranchPrinters</ID>
<Version>1.0.0.5</Version>
</Identity>
<Name>BranchPrinters</Name>
<References>
<Reference Alias="System">
<ID>System.Library</ID>
<Version>7.5.8501.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Console">
<ID>Microsoft.EnterpriseManagement.ServiceManager.UI.Console</ID>
<Version>7.5.3079.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Alias_48e2011a_96d4_42e2_9a09_7e0da882a6f3">
<ID>System.WorkItem.ServiceRequest.Library</ID>
<Version>7.5.3079.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Alias_6e472436_00bc_4ca4_bff5_ffd041972427">
<ID>Microsoft.EnterpriseManagement.ServiceManager.UI.Authoring</ID>
<Version>7.5.3079.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="WorkItem">
<ID>System.WorkItem.Library</ID>
<Version>7.5.2905.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="SupportingItem">
<ID>System.SupportingItem.Library</ID>
<Version>7.5.2905.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="CoreKnowledge">
<ID>System.Knowledge.Library</ID>
<Version>7.5.2905.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Catalog">
<ID>System.ServiceCatalog.Library</ID>
<Version>7.5.2905.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
</References>
</Manifest>
<TypeDefinitions>
<EntityTypes>
<ClassTypes>
<ClassType ID="ServiceRequestBranchPrinters" Accessibility="Public" Abstract="false" Base="Alias_48e2011a_96d4_42e2_9a09_7e0da882a6f3!System.WorkItem.ServiceRequest" Hosted="false" Singleton="false" Extension="false">
<Property ID="Branches" Type="enum" AutoIncrement="false" Key="false" CaseSensitive="false" MaxLength="256" MinLength="0" Required="false" Scale="0" EnumType="Branches" />
<Property ID="PrinterModels" Type="enum" AutoIncrement="false" Key="false" CaseSensitive="false" MaxLength="256" MinLength="0" Required="false" Scale="0" EnumType="PrinterModels" />
</ClassType>
</ClassTypes>
<RelationshipTypes>
<RelationshipType ID="Printer" Accessibility="Public" Abstract="false" Base="System!System.Reference">
<Source ID="Source_facee4a3_7203_41bd_87d4_e30123445605" MinCardinality="0" MaxCardinality="2147483647" Type="ServiceRequestBranchPrinters" />
<Target ID="Target_8100dcd2_9c0a_42d1_9746_735a6e9ec302" MinCardinality="0" MaxCardinality="1" Type="System!System.Printer" />
</RelationshipType>
</RelationshipTypes>
<EnumerationTypes>
<EnumerationValue ID="Branches" Accessibility="Public" />
<EnumerationValue ID="PrinterModels" Accessibility="Public" />
</EnumerationTypes>
<TypeProjections>
<TypeProjection ID="ServiceRequestBranchPrinterForm_TypeProjection" Accessibility="Public" Type="ServiceRequestBranchPrinters">
<Component Path="$Context/Path[Relationship='Printer']$" Alias="ComponentAlias_3ae38849_26ce_4c7c_86b4_6b6201aba2f3" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAssignedToUser']$" Alias="AssignedTo" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemClosedByUser']$" Alias="ClosedBy" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemCreatedByUser']$" Alias="CreatedBy" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAffectedUser']$" Alias="AffectedUser" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemRelatesToConfigItem']$" Alias="RelatedConfigItems" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAboutConfigItem']$" Alias="AboutConfigItem" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAboutConfigItem' TypeConstraint='System!System.Service']$" Alias="AffectedServices" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemRelatesToWorkItem']$" Alias="RelatedWorkItems">
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAssignedToUser']$" Alias="RelatedWorkItemAssignedTo" />
</Component>
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemRelatesToWorkItem' SeedRole='Target']$" Alias="RelatedWorkItemSource">
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAssignedToUser']$" Alias="RelatedWorkItemAssignedTo" />
</Component>
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemHasFileAttachment']$" Alias="FileAttachments">
<Component Path="$Target/Path[Relationship='SupportingItem!System.FileAttachmentAddedByUser']$" Alias="FileAttachmentAddedBy" />
</Component>
<Component Path="$Target/Path[Relationship='CoreKnowledge!System.EntityLinksToKnowledgeDocument']$" Alias="RelatedKnowledgeArticles" />
<Component Path="$Target/Path[Relationship='Catalog!System.WorkItemRelatesToRequestOffering']$" Alias="RelatedRequestOffering" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemHasActionLog' TypeConstraint='WorkItem!System.WorkItem.TroubleTicket.ActionLog']$" Alias="ActionLog" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemHasCommentLog' TypeConstraint='WorkItem!System.WorkItem.TroubleTicket.AnalystCommentLog']$" Alias="AnalystCommentLog" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemHasCommentLog' TypeConstraint='WorkItem!System.WorkItem.TroubleTicket.UserCommentLog']$" Alias="EndUserCommentLog" />
</TypeProjection>
</TypeProjections>
</EntityTypes>
</TypeDefinitions>
<Categories>
<Category ID="BranchPrinters.Category" Value="Console!Microsoft.EnterpriseManagement.ServiceManager.ManagementPack">
<ManagementPackName>BranchPrinters</ManagementPackName>
<ManagementPackVersion>1.0.0.0</ManagementPackVersion>
</Category>
<Category ID="CategoryId_11239275_bd51_4b5e_8038_f4c4f5c0835d" Target="Branches" Value="Alias_6e472436_00bc_4ca4_bff5_ffd041972427!Microsoft.EnterpriseManagement.ServiceManager.UI.Authoring.EnumerationViewTasks" />
<Category ID="CategoryId_882c009d_9a50_4455_aff6_8b715edeb5b0" Target="Branches" Value="System!VisibleToUser" />
<Category ID="CategoryId_e5352c5e_4c1b_4833_a5e0_bf9dd1bd42cd" Target="PrinterModels" Value="Alias_6e472436_00bc_4ca4_bff5_ffd041972427!Microsoft.EnterpriseManagement.ServiceManager.UI.Authoring.EnumerationViewTasks" />
<Category ID="CategoryId_7fe9aacc_43b5_4dbc_b57e_223e579fa613" Target="PrinterModels" Value="System!VisibleToUser" />
</Categories>
<Presentation>
<Forms>
<Form ID="ServiceRequestBranchPrinterForm" Accessibility="Public" Target="ServiceRequestBranchPrinterForm_TypeProjection" Assembly="Microsoft.EnterpriseManagement.ServiceManager.Applications.ServiceRequest.Forms" TypeName="Microsoft.EnterpriseManagement.ServiceManager.Applications.ServiceRequest.Forms.ServiceRequestForm">
<Category>Form</Category>
<Customization>
<AddControl Parent="srFormTabControl" Assembly="PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="System.Windows.Controls.TabItem" Left="377.5" Top="15" Right="0" Bottom="0" Row="0" Column="0" />
<PropertyChange Object="TabItem_1" Property="Header">
<NewValue>Printer Information</NewValue>
</PropertyChange>
<AddControl Parent="Grid_1" Assembly="Microsoft.EnterpriseManagement.UI.SMControls, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="Microsoft.EnterpriseManagement.UI.WpfControls.ListPicker" Left="162.5" Top="63" Right="385" Bottom="827" Row="0" Column="0" />
<PropertyChange Object="ListPicker_1" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_1" Property="Margin">
<NewValue>162.5,63,0,827</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_1" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_1" Property="Margin">
<NewValue>162.5,63,0,0</NewValue>
</PropertyChange>
<AddControl Parent="Grid_1" Assembly="PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="System.Windows.Controls.Label" Left="95.5" Top="62" Right="552" Bottom="826" Row="0" Column="0" />
<PropertyChange Object="Label_1" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>95.5,62,0,826</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>95.5,62,0,0</NewValue>
</PropertyChange>
<Move X="13" Y="-1">
<Element Name="Label_1" />
</Move>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>82.5,63,565,825</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>82.5,63,0,825</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>82.5,63,0,0</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="FlowDirection">
<NewValue>RightToLeft</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_1" Property="ParentCategoryId">
<NewValue>61909694-0d19-fb73-1a24-4f327facb268</NewValue>
</PropertyChange>
<PropertyBindingChange Object="ListPicker_1" Property="SelectedItem">
<NewBinding Enabled="True" Path="PrinterModels" Mode="TwoWay" BindsDirectlyToSource="False" UpdateSourceTrigger="PropertyChanged" />
</PropertyBindingChange>
<Move X="21.8066666666666" Y="2.48000000000002">
<Element Name="Label_1" />
</Move>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.6933333333334,60.52,587,827</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.6933333333334,60.52,0,827</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.6933333333334,60.52,0,0</NewValue>
</PropertyChange>
<PropertyBindingChange Object="Label_1" Property="Content">
<NewBinding Enabled="False" />
</PropertyBindingChange>
<PropertyChange Object="Label_1" Property="Content">
<NewValue>Printer Model</NewValue>
</PropertyChange>
<Move X="-0.193333333333385" Y="-2">
<Element Name="Label_1" />
</Move>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.8866666666668,62.52,587,825</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.8866666666668,62.52,0,825</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.8866666666668,62.52,0,0</NewValue>
</PropertyChange>
<AddControl Parent="Grid_1" Assembly="PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="System.Windows.Controls.Label" Left="96.5" Top="112" Right="551" Bottom="776" Row="0" Column="0" />
<PropertyChange Object="Label_2" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>96.5,112,0,776</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>96.5,112,0,0</NewValue>
</PropertyChange>
<Move X="35.8066666666666" Y="24.52">
<Element Name="Label_2" />
</Move>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.6933333333334,87.48,587,800</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.6933333333334,87.48,0,800</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.6933333333334,87.48,0,0</NewValue>
</PropertyChange>
<PropertyBindingChange Object="Label_2" Property="Content">
<NewBinding Enabled="False" />
</PropertyBindingChange>
<PropertyChange Object="Label_2" Property="Content">
<NewValue>Branch</NewValue>
</PropertyChange>
<AddControl Parent="Grid_1" Assembly="Microsoft.EnterpriseManagement.UI.SMControls, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="Microsoft.EnterpriseManagement.UI.WpfControls.ListPicker" Left="185.5" Top="93" Right="362" Bottom="797" Row="0" Column="0" />
<PropertyChange Object="ListPicker_2" Property="Width">
<NewValue>Auto</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="Margin">
<NewValue>185.5,93,362,0</NewValue>
</PropertyChange>
<Move X="23" Y="-5">
<Element Name="ListPicker_2" />
</Move>
<PropertyChange Object="ListPicker_2" Property="Margin">
<NewValue>162.5,98,385,792</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="Margin">
<NewValue>162.5,98,0,792</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="Width">
<NewValue>180.5</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="Margin">
<NewValue>162.5,98,0,0</NewValue>
</PropertyChange>
<Move X="-0.193333333333385" Y="-8.51999999999998">
<Element Name="Label_2" />
</Move>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,96,587,792</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,96,0,792</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,96,0,0</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="ParentCategoryId">
<NewValue>20d8a660-29aa-9470-2139-555f9938d114</NewValue>
</PropertyChange>
<PropertyBindingChange Object="ListPicker_2" Property="SelectedItem">
<NewBinding Enabled="True" Path="Branches" Mode="TwoWay" BindsDirectlyToSource="False" UpdateSourceTrigger="PropertyChanged" />
</PropertyBindingChange>
<Move X="0" Y="-2">
<Element Name="Label_2" />
</Move>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,98,587,790</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,98,0,790</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,98,0,0</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="FlowDirection">
<NewValue>RightToLeft</NewValue>
</PropertyChange>
<AddControl Parent="Grid_1" Assembly="Microsoft.EnterpriseManagement.UI.SMControls, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="Microsoft.EnterpriseManagement.UI.WpfControls.SingleInstancePicker" Left="211.5" Top="163" Right="336" Bottom="709" Row="0" Column="0" />
<PropertyChange Object="SingleInstancePicker_1" Property="Width">
<NewValue>Auto</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="Margin">
<NewValue>211.5,163,336,0</NewValue>
</PropertyChange>
<Move X="47" Y="16">
<Element Name="SingleInstancePicker_1" />
</Move>
<PropertyChange Object="SingleInstancePicker_1" Property="Margin">
<NewValue>164.5,147,383,725</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="Margin">
<NewValue>164.5,147,0,725</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="Width">
<NewValue>180.5</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="Margin">
<NewValue>164.5,147,0,0</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="BaseClassId">
<NewValue>319e665c-8db5-c06b-fd4b-93991942e429</NewValue>
</PropertyChange>
<PropertyBindingChange Object="SingleInstancePicker_1" Property="Instance">
<NewBinding Enabled="True" Path="ComponentAlias_3ae38849_26ce_4c7c_86b4_6b6201aba2f3" Mode="TwoWay" BindsDirectlyToSource="False" UpdateSourceTrigger="PropertyChanged" />
</PropertyBindingChange>
<AddControl Parent="Grid_1" Assembly="PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="System.Windows.Controls.Label" Left="86.5" Top="158" Right="561" Bottom="730" Row="0" Column="0" />
<PropertyChange Object="Label_3" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="Margin">
<NewValue>86.5,158,0,730</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="Margin">
<NewValue>86.5,158,0,0</NewValue>
</PropertyChange>
<Move X="26" Y="2">
<Element Name="Label_3" />
</Move>
<PropertyChange Object="Label_3" Property="Margin">
<NewValue>60.5,156,587,732</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="Margin">
<NewValue>60.5,156,0,732</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="Margin">
<NewValue>60.5,156,0,0</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="FlowDirection">
<NewValue>RightToLeft</NewValue>
</PropertyChange>
<PropertyBindingChange Object="Label_3" Property="Content">
<NewBinding Enabled="False" />
</PropertyBindingChange>
<PropertyChange Object="Label_3" Property="Content">
<NewValue>Printer</NewValue>
</PropertyChange>
</Customization>
</Form>
</Forms>
</Presentation>
<LanguagePacks>
<LanguagePack ID="ENU" IsDefault="true">
<DisplayStrings>
<DisplayString ElementID="BranchPrinters">
<Name>BranchPrinters</Name>
</DisplayString>
<DisplayString ElementID="ServiceRequestBranchPrinters">
<Name>Service Request, Branch Printers</Name>
<Description>This class inherits from Service Request to define Branch Printers</Description>
</DisplayString>
<DisplayString ElementID="Branches">
<Name>Branch List</Name>
<Description>Contains a list of branches within the organization</Description>
</DisplayString>
<DisplayString ElementID="ServiceRequestBranchPrinters" SubElementID="Branches">
<Name>Branches</Name>
</DisplayString>
<DisplayString ElementID="ServiceRequestBranchPrinters" SubElementID="PrinterModels">
<Name>PrinterModels</Name>
</DisplayString>
<DisplayString ElementID="PrinterModels">
<Name>Printer Model List</Name>
<Description>Contains a list of printers featured throughout the organization</Description>
</DisplayString>
<DisplayString ElementID="ServiceRequestBranchPrinterForm">
<Name>ServiceRequestBranchPrinterForm</Name>
<Description>Specify your form description.</Description>
</DisplayString>
<DisplayString ElementID="Printer">
<Name>Printer</Name>
</DisplayString>
<DisplayString ElementID="Printer" SubElementID="Source_facee4a3_7203_41bd_87d4_e30123445605">
<Name>Source_facee4a3_7203_41bd_87d4_e30123445605</Name>
</DisplayString>
<DisplayString ElementID="Printer" SubElementID="Target_8100dcd2_9c0a_42d1_9746_735a6e9ec302">
<Name>Target_8100dcd2_9c0a_42d1_9746_735a6e9ec302</Name>
</DisplayString>
</DisplayStrings>
</LanguagePack>
</LanguagePacks>
<Resources>
<Assembly ID="Microsoft.EnterpriseManagement.ServiceManager.Applications.ServiceRequest.Forms" Accessibility="Public" FileName="Microsoft.EnterpriseManagement.ServiceManager.Applications.ServiceRequest.Forms.dll" HasNullStream="false" QualifiedName="Microsoft.EnterpriseManagement.ServiceManager.Applications.ServiceRequest.Forms, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</Resources>
</ManagementPack>
Adam Dzak

How to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO?

Hi Experts
i have a reuirement where i have to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO
i am doing below steps for this.
1. Adding custom field ZZfield in structure INCL_EEW_PD_PARTNER_CSF by using append structure.
2. Spro ->Supplier Relationship Management -> SRM Server -> Cross application basic settings -> Extensions and field controls (personalization) -> Configure field control ->Configure Control for Fields of Substructures
then click on "Metadata for Fields of Substructures and Table-Like Enhancements"
add the below entry
Bus. Object Set Type : I am trying 7 and 29
Structure Field Name : ZZfield
Bus. Object Type       : BUS2121/BUS2201
Set Level                    : Item
Field Visible : Check box should be checked
Field Enable : check box should be checked
Can anyone has the idea of this?
Thanks
Rohit

Hello Rohit,
Please create a enchancement for component /SAPSRM/WDC_UI_DO_SHIPTO.
Add new input field and label in view V_DODC_SHIPTO.
Bind the input field value with field ZZfield from structure /SAPSRM/WDC_UI_DO_SHIPTO in the context node SHIP_TO .
Regards,
Neelima

Add Custom fields in Report Incident Screen in EHSM

Hello experts,
I want to add custom fields like Notification No. and division in Report Incident screen in EHSM.
I have added two fields.
Business Object: EHHSS_INCIDENT
Node: BASIC_INFO_ALL
Structure: INCL_EEW_EHHSS_INC_BINFA_D (added two fields using append structure)
Now how can i link with my screen and how to fetch notification data (standard F4 help)?
and when i save data, where it will save?
Can you guide me with proper steps for it as i am new in it.
Thanks in advance.

Hi Jayvin,
To add the above fields on the screen, open the component configuration of the required screen.
Enhance the same and add the fields from the respective Node.
You did not worry about saving the data, once the fields are placed on the screen it will get save on click of save/ on event of save.
Regards,
Sanket.

Add customized tags on shared review comments

Hi,
We have been using shared review to do our document review heavily. Recently I got a request from our stakeholder to add customized tags so we can assign comments in different categories.
Is it doable with some customization effort? I did some research online and found out Acrobat XI supports customization Wizard and for earlier version (we are on Pro 9), you can do customization using JavaScript, but it's not clear to me if these customization efforts can be applied on shared review PDF, or it's just on regular PDF.
Does anyone have experience on Acrobat customization? Any thought or information will be appreciated.
Thanks,
-Yunju

Hi Ajlan,
Thanks for the answer. I also found out about the customization wizard later. Now I'm researching how to use the wizard and deploy the customization feature we desire.
Here are the things we want to do:
- Creating customized menu so we can assign comments to different categories, something like set the comment status
- Modify the workflow. Instead of asking reviewer to "connect" or "cancel" when they first open the PDF, we can to only show "connect"
I also have couple of questions about the wizard:
1. Are the features I describe above can be done through wizard?
2. If we deploy the changes using Acrobat 9 + wizard, will users with all version Acrobat/Reader see the same end result and preform regular shared review operations without problem?
Thanks for the answer.
-Yunju

Resource Object - Add Custom Status

Similar Messages

Maybe you are looking for