Resource requirement for JDeveloper

Hi,
I'm using Jdeveloper for past few months
My PC is having 1GB RAM and processor is P4(2.99GHz). Also OS is WinXP 2002 SP2
Sometimes, it becomes irritatingly slow to work on JDeveloper. My virtual memory space is 2GB.
Am I missing anything or do I need to increase RAM ?
Regards
Rohit

Try the tips here:
http://blogs.oracle.com/shay/2006/03/29

Similar Messages

  • System requirement for JDeveloper 3.1

    Anyone can help me to find the system requirment (hardware requirement) for JDeveloper 3.1 because i cannot find any on the web.
    Also, i have find a doc at the Oracle site saying that JDeveloper can work on Window95/98 OS. Is it true. http://technet.oracle.com/docs/products/jdev/doc_index.htm

    Hi,
    What u have to do is create a deployment profile and then include the archives in the archive tag create a object tab and then deploy the appliocation.
    Regards,
    Ganesh R

  • Resource Requirement for a global zone

    Hi All,
    We are going to deploy Solaris container in our environment. However, we hope know if there any guideline for the resource requirement for setup the global zone. In other words, what are the min cpu / memory should be set assigned to the global zone?
    Thanks in advance.
    Regards

    You don't need to worry about defending the global zone. The design of the pool_default pool includes safeguards that prevent starvation by other pools. The most obvious is the zone strategy itself; there's no way to allocate all the physical memory to a zone before the kernel itself has pinned down what it needs.
    I think it would make better sense to allocate some (large) percentage of memory to the Oracle container and adjust as needed, rather than try and lock every bit of it. Maybe 14 GB and see how that works. I can think of any number of annoyances you might encounter by trying to lock down more memory than is actually available.

  • Hardware requirements for JDeveloper 3.0

    What are the minimum and recommended hardware requirements for
    JDeveloper 3.0?
    null

    Jasmin,
    JDeveloper 3.0 REQUIRES:
    NT 4.0
    Pentium 200Mhz processor
    96M of RAM
    225 MB (360 MB when using WebHelp) for a typical install
    130 MB (265 MB when using WebHelp) for a minimal install
    and RECOMMENDS:
    NT 4.0
    Pentium 266Mhz processor or higher
    128M of RAM
    225 MB (360 MB when using WebHelp) for a typical install
    130 MB (265 MB when using WebHelp) for a minimal install
    JDeveloper 3.0 is compatible with 8.0.5, 7.3.x and 8.1.5 versions
    of the database.
    Laura
    Jasmin (guest) wrote:
    : hi,
    : can anyone let me know:
    : 1. what are the hardware requirements for installing
    jdeveloper
    : suite 3.0
    : 2. whether jdeveloper3.0 is compatible ot oracle 8.0.5 on NT or
    : not?
    : i would appreciate any reply from u guys...
    : Thanks
    : Jasmin
    null

  • How do I know what is the minimum resource requirement for OLAP 11g?

    How do I know for OLAP 11gR1 ...
    1. what is the minimum number of CPUs and speed required
    2. how much minimum physical memory, SGA, PGA etc. is required?
    Regards, Anirban

    Hello Anirban,
    In summary, since the OLAP option is an option to Oracle Database 11g, Enterprise Edition the minimum requirements in order to run the database would be identical to those necessary to run a "Data Warehousing" type installation. That being said starting up a database is a far cry from actually performing well while accessing and building OLAP Cubes in your Database.
    There are lots of things to consider. For example: the complexity of your model; data sparcity; level of aggregation; system load, SLAs, etc..
    Lets look at true minimum requirements and then consider what it would take to achieve good performance in your environment
    TRUE MINIMUM...
    I performed a test in my environment (Oracle Database 11g Release 2 (11.2.0.2.0) on Oracle Enterprise Linux 5.5) using Analytic Workspace Manager 11.2.0.2.0A and found the following minimum settings to work against the OLAPTRAIN schema (You may find it here http://www.oracle.com/technetwork/database/options/olap/index.html). This is a very small schema which we use for demonstration purposes.
    I discovered that the database started with a memory_target of only 160m (apparently this is the absolute minimum for my environment). I knew that if the database successfully started that I would be able to query the Cube but maintain it? Running queries against the OLAPTRAIN Sales Cube, despite being slow, worked as anticipated. Next, I performed a maintain operation on the Sales Cube where I had to abort the job because it ran into memory issues at 160m, however, when I increased it to only 180m it did a complete maintain in a reasonable timeframe, albeit slow considering the limited resources.
    MINIMUM REQUIREMENTS TO ENSURE REASONABLE PERFORMANCE IN YOUR ENVIRONMENT
    Most importantly ensure you have a good cube design
    Run a sample set of your data in order to define what "reasonable performance" is for your environment. Create a small representative cube in order to test both build and query performance while collecting and analyzing database statistics through AWR and ADDM. For OLAP option specific queries please take a look at http://wiki.oracle.com/page/OLAP+option+-DBASample+Scripts.
    You could creat a view on top of your fact table and use the view to generate your OLAP Cube. This will allow you to test a more manageable amount of data. For example, if you have 10 years of data and want to determine the footprint and resources required in order to manage a Cube of this volume then consider scoping it down to a few months first then increase it by a measured amount in order to predict requirements. Monitor your resources and ensure you balance I/O, memory and processors. Since the OLAP option is a Enterprise Edition option it falls under Data Warehousing. As such there is plenty of literature available on oracle.com in order to define what it takes to achieve a balanced Data Warehouse.
    I would recommend contacting Oracle Consulting or an Oracle Partner to determine the best fit for your environment.

  • Resource requirement for EHS implementation

    Hi EHS Gurus
    I want to know the resource requirement and their skill set for EHS implementation & support project?
    As per my knowledge for implementation 4 consultants are required :-
    2 EHS consultants,1 MDM consultant,1 Abaper
    Please confirm it.
    Next do we require SD or MM conultant in EHS implementation or support prj?
    Thanks in advance.

    Hi,
    Estimation of Resource Requirement can be done  based Size of Business or scope document
    like No of plants and employess
    Which sub modules they are going to be implement like Product safety, Dangerous good management
    This module more related to MM and QM
    one ABAper required for New reports and Dat migration at Final configuration stage
    Thanks
    sreeni

  • Resource requirements for 4500-5000 users

    Hi Everyone,
                 i'm in the process of setting up a b2b solution based on CRM 7 (not full fledged CRM 7 only the internet sales component) for about 4500 - 5000 users. looking @ setting up a cluster with SAP Web Dispatcher based load balancing.
         the draft landscape is as follows...
    1 DBCI Instance           16GB4CPU
    1 SAP Web Dispatcher Instance     8GB+4CPU
    4 App Server instances           6GB+2CPU on each node
    Would appreciate your feedback.

    Christa,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • ISSUE: "This domain controller must register a DNS SRV resource record, which is required for replication to function correctly"

    so we currently have three domain controllers set up, two of them on 2012r2 and one of them on 2008r2. prior to any of these domain controllers being added to the domain there was only one, running on 2003r2. the 2003r2 server was up and running when the
    first 2012r2 was added and that's when running 'dcdiag /e /c /v' would yield an issue with "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local" in the DNS portion of the diagnostics, specifically:
    TEST: Records registration (RReg)
    Network Adapter [00000010] Microsoft Hyper-V Network Adapter:
    Error:
    Missing SRV record at DNS server 192.168.22.4:
    _ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
    after adding the second 2012r2 to the domain, this issue is still there... adding the 2008r2 server to the domain and running BPA it gives the following:
    Title:
    This domain controller must register a DNS SRV resource record, which is required for replication to function correctly
    Severity:
    Error
    Date:
    7/3/2014 11:24:48 AM
    Category:
    Configuration
    Issue:
    The "DcByGuid" DNS service (SRV) resource record that advertises this server as an available domain controller in the domain and ensures correct replication is not registered. All domain controllers (but not RODCs) in the domain must register this record.
    Impact:
    Other member computers and domain controllers in the domain or forest will not be able to locate this domain controller. This domain controller will not be able to provide a full suite of services.
    Resolution:
    Ensure that "DcByGuid" is not configured in the "DnsAvoidRegisteredRecords" list, either through Group Policy or through the registry. Restart the Netlogon service. Verify that the DNS service (SRV) resource record "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local", pointing to the local domain controller "CM-DC4-NY01.cmedia.local", is registered in DNS.
    More information about this best practice and detailed resolution procedures: http://go.microsoft.com/fwlink/?LinkId=126968
    I've tried scanning and then re-scanning every single entry in DNS Manager and do not see any reference to this specific GUID mentioned, nor do I see any other domain controllers referenced that should not be in there. The two 2012r2 and the 2008r2 domain
    controllers are the only ones listed in DNS Manager... the 2003r2 mentioned earlier failed and was removed.

    Just to chime in, I noticed that you said you have one 2008 R2 DC, and two 2012 DCs.
    I also noticed in the ipconfig /all that all DCs are pointint to themselves for DNS. We usually like to see them point to a partner, then itslelf as the second entry, w hether loopback or by its own IP.
    Based on that, what I suggest to level the playing field by choosing the WIndows 2008 R2 DC as the first DNS on all DCs and only administer DNS using that DC. The reason I chose that is because of the least common denominator is what we rather use so we
    don't invoke any new features in the newer 2012 DNS console that 2008 R2 may not understand.  After that's done, on each DC run (and you can use a PowerShell window to run this):
    Rename the system32\config\netlogon.dns and netlogon.dnb files by suffixing ".old" to the file.
    ipconfig /registerdns
    net stop netlogon
    net start netlogon
    Then re-run the dcdiag /e /c /v.
    Post your results, please.
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.
    I thought the DNS entries were supposed to be the other way around? point to themselves first and a partner as secondary? regardless, as requested, I've changed it to what you've prescribed where they point to the 2008r2 server as the primary with themselves
    as the secondary. I've also followed the steps to what seems like refreshing the DNS? on each of the DCs. Here's the output from dcdiag /e /c /v
    Directory Server Diagnosis
    Performing initial setup:
    Trying to find home server...
    * Verifying that the local machine CM-DC1-NY01, is a Directory Server.
    Home Server = CM-DC1-NY01
    * Connecting to directory service on server CM-DC1-NY01.
    * Identified AD Forest.
    Collecting AD specific global data
    * Collecting site info.
    Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory
    =ntDSSiteSettings),.......
    The previous call succeeded
    Iterating through the sites
    Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia
    ,DC=local
    Getting ISTG and options for the site
    * Identifying all servers.
    Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=nt
    DSDsa),.......
    The previous call succeeded....
    The previous call succeeded
    Iterating through the list of servers
    Getting information for the server CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
    ,CN=Configuration,DC=cmedia,DC=local
    objectGuid obtained
    InvocationID obtained
    dnsHostname obtained
    site info obtained
    All the info for the server collected
    Getting information for the server CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
    ,CN=Configuration,DC=cmedia,DC=local
    objectGuid obtained
    InvocationID obtained
    dnsHostname obtained
    site info obtained
    All the info for the server collected
    Getting information for the server CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
    ,CN=Configuration,DC=cmedia,DC=local
    objectGuid obtained
    InvocationID obtained
    dnsHostname obtained
    site info obtained
    All the info for the server collected
    * Identifying all NC cross-refs.
    * Found 3 DC(s). Testing 3 of them.
    Done gathering initial info.
    Doing initial required tests
    Testing server: Default-First-Site-Name\CM-DC1-NY01
    Starting test: Connectivity
    * Active Directory LDAP Services Check
    Determining IP4 connectivity
    * Active Directory RPC Services Check
    ......................... CM-DC1-NY01 passed test Connectivity
    Testing server: Default-First-Site-Name\CM-DC3-NY01
    Starting test: Connectivity
    * Active Directory LDAP Services Check
    Determining IP4 connectivity
    * Active Directory RPC Services Check
    ......................... CM-DC3-NY01 passed test Connectivity
    Testing server: Default-First-Site-Name\CM-DC4-NY01
    Starting test: Connectivity
    * Active Directory LDAP Services Check
    Determining IP4 connectivity
    * Active Directory RPC Services Check
    ......................... CM-DC4-NY01 passed test Connectivity
    Doing primary tests
    Testing server: Default-First-Site-Name\CM-DC1-NY01
    Starting test: Advertising
    The DC CM-DC1-NY01 is advertising itself as a DC and having a DS.
    The DC CM-DC1-NY01 is advertising as an LDAP server
    The DC CM-DC1-NY01 is advertising as having a writeable directory
    The DC CM-DC1-NY01 is advertising as a Key Distribution Center
    The DC CM-DC1-NY01 is advertising as a time server
    The DS CM-DC1-NY01 is advertising as a GC.
    ......................... CM-DC1-NY01 passed test Advertising
    Starting test: CheckSecurityError
    * Dr Auth: Beginning security errors check!
    Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
    Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local
    * SPN found :LDAP/CM-DC1-NY01
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
    * SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
    * SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC1-NY01.cmedia.local
    * SPN found :HOST/CM-DC1-NY01
    * SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
    [CM-DC1-NY01] No security related replication errors were found on this DC! To target the connection to a
    specific source DC use /ReplSource:<DC>.
    ......................... CM-DC1-NY01 passed test CheckSecurityError
    Starting test: CutoffServers
    * Configuration Topology Aliveness Check
    * Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC1-NY01 passed test CutoffServers
    Starting test: FrsEvent
    * The File Replication Service Event log test
    ......................... CM-DC1-NY01 passed test FrsEvent
    Starting test: DFSREvent
    The DFS Replication Event Log.
    Skip the test because the server is running FRS.
    ......................... CM-DC1-NY01 passed test DFSREvent
    Starting test: SysVolCheck
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC1-NY01 passed test SysVolCheck
    Starting test: FrsSysVol
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC1-NY01 passed test FrsSysVol
    Starting test: KccEvent
    * The KCC Event log test
    Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
    ......................... CM-DC1-NY01 passed test KccEvent
    Starting test: KnowsOfRoleHolders
    Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
    =Sites,CN=Configuration,DC=cmedia,DC=local
    ......................... CM-DC1-NY01 passed test KnowsOfRoleHolders
    Starting test: MachineAccount
    Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local
    * SPN found :LDAP/CM-DC1-NY01
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
    * SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
    * SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC1-NY01.cmedia.local
    * SPN found :HOST/CM-DC1-NY01
    * SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
    ......................... CM-DC1-NY01 passed test MachineAccount
    Starting test: NCSecDesc
    * Security Permissions check for all NC's on DC CM-DC1-NY01.
    The forest is not ready for RODC. Will skip checking ERODC ACEs.
    * Security Permissions Check for
    DC=ForestDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    DC=DomainDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    (Schema,Version 3)
    * Security Permissions Check for
    CN=Configuration,DC=cmedia,DC=local
    (Configuration,Version 3)
    * Security Permissions Check for
    DC=cmedia,DC=local
    (Domain,Version 3)
    ......................... CM-DC1-NY01 passed test NCSecDesc
    Starting test: NetLogons
    * Network Logons Privileges Check
    Verified share \\CM-DC1-NY01\netlogon
    Verified share \\CM-DC1-NY01\sysvol
    ......................... CM-DC1-NY01 passed test NetLogons
    Starting test: ObjectsReplicated
    CM-DC1-NY01 is in domain DC=cmedia,DC=local
    Checking for CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 3 servers
    Object is up-to-date on all servers.
    Checking for CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
    n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
    Object is up-to-date on all servers.
    ......................... CM-DC1-NY01 passed test ObjectsReplicated
    Starting test: OutboundSecureChannels
    * The Outbound Secure Channels test
    ** Did not run Outbound Secure Channels test because /testdomain: was not entered
    ......................... CM-DC1-NY01 passed test OutboundSecureChannels
    Starting test: Replications
    * Replications Check
    * Replication Latency Check
    DC=ForestDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=DomainDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    ......................... CM-DC1-NY01 passed test Replications
    Starting test: RidManager
    * Available RID Pool for the Domain is 16109 to 1073741823
    * CM-DC1-NY01.cmedia.local is the RID Master
    * DsBind with RID Master was successful
    * rIDAllocationPool is 4609 to 5108
    * rIDPreviousAllocationPool is 4609 to 5108
    * rIDNextRID: 4629
    ......................... CM-DC1-NY01 passed test RidManager
    Starting test: Services
    * Checking Service: EventSystem
    * Checking Service: RpcSs
    * Checking Service: NTDS
    * Checking Service: DnsCache
    * Checking Service: NtFrs
    * Checking Service: IsmServ
    * Checking Service: kdc
    * Checking Service: SamSs
    * Checking Service: LanmanServer
    * Checking Service: LanmanWorkstation
    * Checking Service: w32time
    * Checking Service: NETLOGON
    ......................... CM-DC1-NY01 passed test Services
    Starting test: SystemLog
    * The System Event log test
    A warning event occurred. EventID: 0x0000002F
    Time Generated: 07/08/2014 13:19:14
    Event String:
    Time Provider NtpClient: No valid response has been received from manually configured peer 0.ca.pool.ntp.org
    after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a n
    ew peer with this DNS name. The error was: The peer is unreachable.
    Found no errors in "System" Event log in the last 60 minutes.
    ......................... CM-DC1-NY01 passed test SystemLog
    Starting test: Topology
    * Configuration Topology Integrity Check
    * Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC1-NY01 passed test Topology
    Starting test: VerifyEnterpriseReferences
    ......................... CM-DC1-NY01 passed test VerifyEnterpriseReferences
    Starting test: VerifyReferences
    The system object reference (serverReference) CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local
    and backlink on
    CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
    correct.
    The system object reference (serverReferenceBL)
    CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on
    CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
    ia,DC=local
    are correct.
    The system object reference (frsComputerReferenceBL)
    CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
    ......................... CM-DC1-NY01 passed test VerifyReferences
    Starting test: VerifyReplicas
    ......................... CM-DC1-NY01 passed test VerifyReplicas
    Testing server: Default-First-Site-Name\CM-DC3-NY01
    Starting test: Advertising
    The DC CM-DC3-NY01 is advertising itself as a DC and having a DS.
    The DC CM-DC3-NY01 is advertising as an LDAP server
    The DC CM-DC3-NY01 is advertising as having a writeable directory
    The DC CM-DC3-NY01 is advertising as a Key Distribution Center
    The DC CM-DC3-NY01 is advertising as a time server
    The DS CM-DC3-NY01 is advertising as a GC.
    ......................... CM-DC3-NY01 passed test Advertising
    Starting test: CheckSecurityError
    * Dr Auth: Beginning security errors check!
    Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
    Checking machine account for DC CM-DC3-NY01 on DC CM-DC1-NY01.
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local
    * SPN found :LDAP/CM-DC3-NY01
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
    * SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
    * SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC3-NY01.cmedia.local
    * SPN found :HOST/CM-DC3-NY01
    * SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
    Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 2 servers
    Object is up-to-date on all servers.
    [CM-DC3-NY01] No security related replication errors were found on this DC! To target the connection to a
    specific source DC use /ReplSource:<DC>.
    ......................... CM-DC3-NY01 passed test CheckSecurityError
    Starting test: CutoffServers
    * Configuration Topology Aliveness Check
    * Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC3-NY01 passed test CutoffServers
    Starting test: FrsEvent
    * The File Replication Service Event log test
    ......................... CM-DC3-NY01 passed test FrsEvent
    Starting test: DFSREvent
    The DFS Replication Event Log.
    Skip the test because the server is running FRS.
    ......................... CM-DC3-NY01 passed test DFSREvent
    Starting test: SysVolCheck
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC3-NY01 passed test SysVolCheck
    Starting test: FrsSysVol
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC3-NY01 passed test FrsSysVol
    Starting test: KccEvent
    * The KCC Event log test
    Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
    ......................... CM-DC3-NY01 passed test KccEvent
    Starting test: KnowsOfRoleHolders
    Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
    =Sites,CN=Configuration,DC=cmedia,DC=local
    ......................... CM-DC3-NY01 passed test KnowsOfRoleHolders
    Starting test: MachineAccount
    Checking machine account for DC CM-DC3-NY01 on DC CM-DC3-NY01.
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local
    * SPN found :LDAP/CM-DC3-NY01
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
    * SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
    * SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC3-NY01.cmedia.local
    * SPN found :HOST/CM-DC3-NY01
    * SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
    ......................... CM-DC3-NY01 passed test MachineAccount
    Starting test: NCSecDesc
    * Security Permissions check for all NC's on DC CM-DC3-NY01.
    The forest is not ready for RODC. Will skip checking ERODC ACEs.
    * Security Permissions Check for
    DC=ForestDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    DC=DomainDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    (Schema,Version 3)
    * Security Permissions Check for
    CN=Configuration,DC=cmedia,DC=local
    (Configuration,Version 3)
    * Security Permissions Check for
    DC=cmedia,DC=local
    (Domain,Version 3)
    ......................... CM-DC3-NY01 passed test NCSecDesc
    Starting test: NetLogons
    * Network Logons Privileges Check
    Verified share \\CM-DC3-NY01\netlogon
    Verified share \\CM-DC3-NY01\sysvol
    ......................... CM-DC3-NY01 passed test NetLogons
    Starting test: ObjectsReplicated
    CM-DC3-NY01 is in domain DC=cmedia,DC=local
    Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 3 servers
    Object is up-to-date on all servers.
    Checking for CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
    n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
    Object is up-to-date on all servers.
    ......................... CM-DC3-NY01 passed test ObjectsReplicated
    Starting test: OutboundSecureChannels
    * The Outbound Secure Channels test
    ** Did not run Outbound Secure Channels test because /testdomain: was not entered
    ......................... CM-DC3-NY01 passed test OutboundSecureChannels
    Starting test: Replications
    * Replications Check
    * Replication Latency Check
    DC=ForestDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=DomainDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    ......................... CM-DC3-NY01 passed test Replications
    Starting test: RidManager
    * Available RID Pool for the Domain is 16109 to 1073741823
    * CM-DC1-NY01.cmedia.local is the RID Master
    * DsBind with RID Master was successful
    * rIDAllocationPool is 15109 to 15608
    * rIDPreviousAllocationPool is 15109 to 15608
    * rIDNextRID: 15110
    ......................... CM-DC3-NY01 passed test RidManager
    Starting test: Services
    * Checking Service: EventSystem
    * Checking Service: RpcSs
    * Checking Service: NTDS
    * Checking Service: DnsCache
    * Checking Service: NtFrs
    * Checking Service: IsmServ
    * Checking Service: kdc
    * Checking Service: SamSs
    * Checking Service: LanmanServer
    * Checking Service: LanmanWorkstation
    * Checking Service: w32time
    * Checking Service: NETLOGON
    ......................... CM-DC3-NY01 passed test Services
    Starting test: SystemLog
    * The System Event log test
    Found no errors in "System" Event log in the last 60 minutes.
    ......................... CM-DC3-NY01 passed test SystemLog
    Starting test: Topology
    * Configuration Topology Integrity Check
    * Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC3-NY01 passed test Topology
    Starting test: VerifyEnterpriseReferences
    ......................... CM-DC3-NY01 passed test VerifyEnterpriseReferences
    Starting test: VerifyReferences
    The system object reference (serverReference) CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local
    and backlink on
    CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
    correct.
    The system object reference (serverReferenceBL)
    CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on
    CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
    ia,DC=local
    are correct.
    The system object reference (frsComputerReferenceBL)
    CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
    ......................... CM-DC3-NY01 passed test VerifyReferences
    Starting test: VerifyReplicas
    ......................... CM-DC3-NY01 passed test VerifyReplicas
    Testing server: Default-First-Site-Name\CM-DC4-NY01
    Starting test: Advertising
    The DC CM-DC4-NY01 is advertising itself as a DC and having a DS.
    The DC CM-DC4-NY01 is advertising as an LDAP server
    The DC CM-DC4-NY01 is advertising as having a writeable directory
    The DC CM-DC4-NY01 is advertising as a Key Distribution Center
    The DC CM-DC4-NY01 is advertising as a time server
    The DS CM-DC4-NY01 is advertising as a GC.
    ......................... CM-DC4-NY01 passed test Advertising
    Starting test: CheckSecurityError
    * Dr Auth: Beginning security errors check!
    Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
    Checking machine account for DC CM-DC4-NY01 on DC CM-DC1-NY01.
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local
    * SPN found :LDAP/CM-DC4-NY01
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
    * SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
    * SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC4-NY01.cmedia.local
    * SPN found :HOST/CM-DC4-NY01
    * SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
    Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 2 servers
    Object is up-to-date on all servers.
    [CM-DC4-NY01] No security related replication errors were found on this DC! To target the connection to a
    specific source DC use /ReplSource:<DC>.
    ......................... CM-DC4-NY01 passed test CheckSecurityError
    Starting test: CutoffServers
    * Configuration Topology Aliveness Check
    * Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC4-NY01 passed test CutoffServers
    Starting test: FrsEvent
    * The File Replication Service Event log test
    ......................... CM-DC4-NY01 passed test FrsEvent
    Starting test: DFSREvent
    The DFS Replication Event Log.
    Skip the test because the server is running FRS.
    ......................... CM-DC4-NY01 passed test DFSREvent
    Starting test: SysVolCheck
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC4-NY01 passed test SysVolCheck
    Starting test: FrsSysVol
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC4-NY01 passed test FrsSysVol
    Starting test: KccEvent
    * The KCC Event log test
    Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
    ......................... CM-DC4-NY01 passed test KccEvent
    Starting test: KnowsOfRoleHolders
    Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
    =Sites,CN=Configuration,DC=cmedia,DC=local
    ......................... CM-DC4-NY01 passed test KnowsOfRoleHolders
    Starting test: MachineAccount
    Checking machine account for DC CM-DC4-NY01 on DC CM-DC4-NY01.
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local
    * SPN found :LDAP/CM-DC4-NY01
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
    * SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
    * SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC4-NY01.cmedia.local
    * SPN found :HOST/CM-DC4-NY01
    * SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
    ......................... CM-DC4-NY01 passed test MachineAccount
    Starting test: NCSecDesc
    * Security Permissions check for all NC's on DC CM-DC4-NY01.
    The forest is not ready for RODC. Will skip checking ERODC ACEs.
    * Security Permissions Check for
    DC=ForestDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    DC=DomainDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    (Schema,Version 3)
    * Security Permissions Check for
    CN=Configuration,DC=cmedia,DC=local
    (Configuration,Version 3)
    * Security Permissions Check for
    DC=cmedia,DC=local
    (Domain,Version 3)
    ......................... CM-DC4-NY01 passed test NCSecDesc
    Starting test: NetLogons
    * Network Logons Privileges Check
    Verified share \\CM-DC4-NY01\netlogon
    Verified share \\CM-DC4-NY01\sysvol
    ......................... CM-DC4-NY01 passed test NetLogons
    Starting test: ObjectsReplicated
    CM-DC4-NY01 is in domain DC=cmedia,DC=local
    Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 3 servers
    Object is up-to-date on all servers.
    Checking for CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
    n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
    Object is up-to-date on all servers.
    ......................... CM-DC4-NY01 passed test ObjectsReplicated
    Starting test: OutboundSecureChannels
    * The Outbound Secure Channels test
    ** Did not run Outbound Secure Channels test because /testdomain: was not entered
    ......................... CM-DC4-NY01 passed test OutboundSecureChannels
    Starting test: Replications
    * Replications Check
    * Replication Latency Check
    DC=ForestDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=DomainDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    ......................... CM-DC4-NY01 passed test Replications
    Starting test: RidManager
    * Available RID Pool for the Domain is 16109 to 1073741823
    * CM-DC1-NY01.cmedia.local is the RID Master
    * DsBind with RID Master was successful
    * rIDAllocationPool is 15609 to 16108
    * rIDPreviousAllocationPool is 15609 to 16108
    * rIDNextRID: 15609
    ......................... CM-DC4-NY01 passed test RidManager
    Starting test: Services
    * Checking Service: EventSystem
    * Checking Service: RpcSs
    * Checking Service: NTDS
    * Checking Service: DnsCache
    * Checking Service: NtFrs
    * Checking Service: IsmServ
    * Checking Service: kdc
    * Checking Service: SamSs
    * Checking Service: LanmanServer
    * Checking Service: LanmanWorkstation
    * Checking Service: w32time
    * Checking Service: NETLOGON
    ......................... CM-DC4-NY01 passed test Services
    Starting test: SystemLog
    * The System Event log test
    Found no errors in "System" Event log in the last 60 minutes.
    ......................... CM-DC4-NY01 passed test SystemLog
    Starting test: Topology
    * Configuration Topology Integrity Check
    * Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC4-NY01 passed test Topology
    Starting test: VerifyEnterpriseReferences
    ......................... CM-DC4-NY01 passed test VerifyEnterpriseReferences
    Starting test: VerifyReferences
    The system object reference (serverReference) CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local
    and backlink on
    CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
    correct.
    The system object reference (serverReferenceBL)
    CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on
    CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
    ia,DC=local
    are correct.
    The system object reference (frsComputerReferenceBL)
    CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
    ......................... CM-DC4-NY01 passed test VerifyReferences
    Starting test: VerifyReplicas
    ......................... CM-DC4-NY01 passed test VerifyReplicas

  • Resource Availability - for next Shift only when required

    Hi Gurus,
    How the Resources can be made available for the 2nd/3rd shift, only during a certain period. Resource should be made available for 2nd/3rd Shift as and when required period
    Since the requirement for the shift is not sure during the Master Data(Resource) creation or at the Planning phase, It can only be decided upon during the shop floor execution based on the load and the urgency of the production compeletion. Is there a way to select/extend the Shift for 2nd/3rd shifts to make the resource available, ONLY as and when required
    Appreciate your help in advance
    Regards,
    TamNen

    TamNem,
    1. How this Resource availability - Extension will get accounted in CRP
    I am not sure why you even care.  This is execution, not planning (predicting the future).  In effect, you are declaring, either upon execution or very near to the actual execution date,  that the existing plan was unworkable.  You declared a new cap plan, based on the reality of the capacity situation.  Many companies don't even bother with such niceties.
    Anyhow, these additional hours will show as available in CRP.  If you schedule your existing orders to utilize these hours, then the additional hours will be consumed, by any orders that are scheduled to consume them.
    When the Shop floor user decides in the mid-of-the day and plans to run the 2nd shift for the production completion for only one day to achieve the target, should the same procedure Master data change be done(each a day - when required)
    Who even cares?  You will confirm orders during execution, based on what actually happened, and these confirmations will consume existing capacity requirements.  Once you have confirmed your orders. why do you need to change your old Cap plan to match the consumption actuality that happened during execution?  It is all a moot point, since it has already happened.   Planning is important only to predict the future.  What is the point of changing the old (inaccurate) plan to match the reality of what actually happened?
    3. Since the production department has many number of machines(15 Machines) and all...
    what are you talking about? I definitely don't understand the question.
    Capacity plan lets you plan what you are going to do in the future.  Execution tells you what actually happened.  Who cares what machines you actually used/didn't use?  You either executed the cap plan, or you didn't.  Execution will seldom match the plan.  The only thing a planner is interested in is "how much available capacity do I  have now, and how much remaining load is there on the capacity, as of right now.  No other questions are relevant.   Previous plans are irrelevant.  Comsumption variances are irrelevant (except to help you fine-tune existing future plans).
    I don't believe there is much benefit to 'fiddling' with the previously created plan so as to make it match reality. Just execute.  If manufacturing has to work additional shifts, let them do so.  I don't believe It is really necessary to change the old plan to reflect the fact that manufacturing decided they needed to work additional shifts to meet the requirements of the cap plan..
    Rgds,
    DB49

  • Required Files for JDeveloper 9I

    The downloadable JDEVELPOPER 9i comes with a lot of iles and no install wizard.
    I am sure that not all are required. Where if at all is any information specify what
    files are required for installation ?

    You don't need to install JDeveloper. To run the product, simply run the executable file \JDeveloper\jdev\bin\jdevw.exe.

  • I have an iMac and a MacBook with Intel Core 2 Duo processors. I realize that this is within the stated requirements for Lion.  However was wondering if by migrating to Lion this will result in too much demand on processor resources, thus a slower machine

    I have an iMac and a MacBook with Intel Core 2 Duo processors. I realize that this is within the stated requirements for Lion.  However was wondering if by migrating to Lion this will result in too much demand on processor resources, thus a slower machine than using Snow Leopard?

    Which iMac?  Which Macbook?   Both have had several model
    itertations, even within the framework of a Core2Duo processor.
    With that said, I have an early 2009 iMac 24", with 2.66 GHz
    Core2Duo with 8 gig of RAM, and in my opinion, seems to be running
    smoother and faster with Lion.

  • Java.rmi.UnmarshalException: skeleton class not found but required for clie

    Hello everyone,
    I am new to RMI and getting a strange exception. I am using Java 1.5.0_07 both on client and server. They are running on the same machine, the rmi registry is started inside the server application.
    I am wondering why java complains about skeletons, I thought they are automatically created when using java 5.0?
    Please have a look at the stacktrace below.
    Thank you for your help.
    Best Regards
    Patric
    java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
         java.rmi.UnmarshalException: error unmarshalling call header; nested exception is:
         java.rmi.UnmarshalException: skeleton class not found but required for client version
         sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:325)
         sun.rmi.transport.Transport$1.run(Transport.java:153)
         java.security.AccessController.doPrivileged(Native Method)
         sun.rmi.transport.Transport.serviceCall(Transport.java:149)
         sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
         sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
         java.lang.Thread.run(Thread.java:595)
         sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
         sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:223)
         sun.rmi.server.UnicastRef.invoke(UnicastRef.java:343)
         sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
         java.rmi.Naming.lookup(Naming.java:84)
         org.apache.jsp.index_jsp._jspService(index_jsp.java:58)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

    The full class path information that I can gather is as follows (some of the library path locations could be suspect...):
    Class path: /edge/node3/hotfix::/edge/node3/current/lib/JMdsApi.jar:/edge/node3/current/lib/MemoryProfilingAgent.jar:/edge/node3/current/lib/T2common-2.6.0-SNAPSHOT.3200.jar:/edge/node3/current/lib/T2scripting-jython.jar:/edge/node3/current/lib/activation.jar:/edge/node3/current/lib/alib.jar:/edge/node3/current/lib/alibom.jar:/edge/node3/current/lib/ant.jar:/edge/node3/current/lib/authapi.jar:/edge/node3/current/lib/bbdlapi.jar:/edge/node3/current/lib/bcpg-jdk15-136.jar:/edge/node3/current/lib/bcprov-jdk15-136.jar:/edge/node3/current/lib/c3p0-0.9.1.2.jar:/edge/node3/current/lib/castor-1.1-codegen-anttask.jar:/edge/node3/current/lib/castor-1.1-codegen.jar:/edge/node3/current/lib/castor-1.1-xml.jar:/edge/node3/current/lib/castor-1.1.jar:/edge/node3/current/lib/colt-1.2.0.jar:/edge/node3/current/lib/common-annotations.jar:/edge/node3/current/lib/commons-beanutils.jar:/edge/node3/current/lib/commons-codec-1.3.jar:/edge/node3/current/lib/commons-collections-3.2.1.jar:/edge/node3/current/lib/commons-jexl-1.1.jar:/edge/node3/current/lib/commons-lang-2.3.jar:/edge/node3/current/lib/commons-logging-1.1.1.jar:/edge/node3/current/lib/commons-net-1.4.1.jar:/edge/node3/current/lib/dsn.jar:/edge/node3/current/lib/eagleapi.jar:/edge/node3/current/lib/ezmorph-1.0.3.jar:/edge/node3/current/lib/f2-loader-1.8.jar:/edge/node3/current/lib/fasttrade-boviewer-1.0.1.jar:/edge/node3/current/lib/hsqldb.jar:/edge/node3/current/lib/icu4j-3.4.4.jar:/edge/node3/current/lib/ivy.jar:/edge/node3/current/lib/janino.jar:/edge/node3/current/lib/janus-sdk-1.7.0.0.jar:/edge/node3/current/lib/jasypt-1.4.1.jar:/edge/node3/current/lib/javolution.jar:/edge/node3/current/lib/jcalendar-1.3.2.jar:/edge/node3/current/lib/jcl-over-slf4j-1.5.6.jar:/edge/node3/current/lib/jcommon-1.0.9.jar:/edge/node3/current/lib/jconn2.jar:/edge/node3/current/lib/jconn3-6.05-b26214.jar:/edge/node3/current/lib/jdom.jar:/edge/node3/current/lib/jfreechart-1.0.5.jar:/edge/node3/current/lib/jgroups-all.jar:/edge/node3/current/lib/jline.jar:/edge/node3/current/lib/jmkv123p1.jar:/edge/node3/current/lib/jna.jar:/edge/node3/current/lib/joda-time-1.5.2.jar:/edge/node3/current/lib/jscience.jar:/edge/node3/current/lib/json-lib-2.2.1-jdk15.jar:/edge/node3/current/lib/jul-to-slf4j-1.5.6.jar:/edge/node3/current/lib/junit.jar:/edge/node3/current/lib/jython.jar:/edge/node3/current/lib/log4j-1.2.15.jar:/edge/node3/current/lib/log4j-over-slf4j-1.5.6.jar:/edge/node3/current/lib/loggablePreparedStatement-1.6.jar:/edge/node3/current/lib/looks-2.1.4.jar:/edge/node3/current/lib/mailapi.jar:/edge/node3/current/lib/model-12021.jar:/edge/node3/current/lib/mysql-connector-java-5.1.7-bin.jar:/edge/node3/current/lib/opencsv-1.8.jar:/edge/node3/current/lib/rfa.jar:/edge/node3/current/lib/rspcore.jar:/edge/node3/current/lib/slf4j-api-1.5.6.jar:/edge/node3/current/lib/slf4j-log4j12-1.5.6.jar:/edge/node3/current/lib/smtp.jar:/edge/node3/current/lib/smtphandler-0.6.jar:/edge/node3/current/lib/spring-2.5.2.jar:/edge/node3/current/lib/statsvn.jar:/edge/node3/current/lib/swingx-0.9.3.jar:/edge/node3/current/lib/t2-12021.jar:/edge/node3/current/lib/testng-5.9-jdk15.jar:/edge/node3/current/lib/tibmsg.jar:/edge/node3/current/lib/tibrvj.jar:/edge/node3/current/lib/trove.jar:/edge/node3/current/lib/velocity-tools.jar:/edge/node3/current/lib/velocity.jar:/edge/node3/current/lib/xalan.jar:/edge/node3/current/lib/xerces.jar:/edge/node3/current/lib/patng/activeio-core-3.0.0-incubator.jar:/edge/node3/current/lib/patng/activemq-core-4.1.1.jar:/edge/node3/current/lib/patng/avalon-framework-4.1.3.jar:/edge/node3/current/lib/patng/backport-util-concurrent-2.2.jar:/edge/node3/current/lib/patng/binding-1.4.0.jar:/edge/node3/current/lib/patng/cglib-nodep-2.1_3.jar:/edge/node3/current/lib/patng/common-1.30.jar:/edge/node3/current/lib/patng/commons-cli-1.0.jar:/edge/node3/current/lib/patng/commons-configuration-1.2.jar:/edge/node3/current/lib/patng/commons-discovery-0.2.jar:/edge/node3/current/lib/patng/commons-math-1.1.jar:/edge/node3/current/lib/patng/concurrent-1.3.4.jar:/edge/node3/current/lib/patng/geronimo-j2ee-management_1.0_spec-1.0.jar:/edge/node3/current/lib/patng/geronimo-jms_1.1_spec-1.0.jar:/edge/node3/current/lib/patng/logkit-1.0.1.jar:/edge/node3/current/lib/patng/mina-core-1.0.1.jar:/edge/node3/current/lib/patng/mina-filter-ssl-1.0.1.jar:/edge/node3/current/lib/patng/mina-java5-1.0.1.jar:/edge/node3/current/lib/patng/mx4j-remote-3.0.1.jar:/edge/node3/current/lib/patng/mx4j-tools-3.0.1.jar:/edge/node3/current/lib/patng/org.apache.felix.framework-1.0.0.jar:/edge/node3/current/lib/patng/org.osgi.core-1.0.0.jar:/edge/node3/current/lib/patng/pat-dt-common-1.18.jar:/edge/node3/current/lib/patng/pat-sdt-1.18.jar:/edge/node3/current/lib/patng/patNg-api-1.27.1.jar:/edge/node3/current/lib/patng/patNg-server-aoc-1.21.jar:/edge/node3/current/lib/patng/patNg-server-common-1.21.jar:/edge/node3/current/lib/patng/patNg-server-session-manager-1.21.jar:/edge/node3/current/lib/patng/patNg-utils-1.27.1.jar:/edge/node3/current/lib/patng/qpid-broker-2.2.2.0.jar:/edge/node3/current/lib/patng/qpid-client-2.2.2.0.jar:/edge/node3/current/lib/patng/qpid-common-2.2.2.0.jar:/edge/node3/current/lib/patng/qpid-mina-core-2.2.2.0.jar:/edge/node3/current/lib/patng/rsee-2.11.jar:/edge/node3/current/lib/patng/servlet-api-2.3.jar:/edge/node3/current/lib/patng/silk-1.3.jar:/edge/node3/current/lib/patng/slf4j-api-1.4.0.jar:/edge/node3/current/lib/patng/slf4j-log4j12-1.4.0.jar:/edge/node3/current/lib/patng/validation-1.2.0.jar
    Boot class path: /apps/jdk/1.6.0_13/linux/jre/lib/resources.jar:/apps/jdk/1.6.0_13/linux/jre/lib/rt.jar:/apps/jdk/1.6.0_13/linux/jre/lib/sunrsasign.jar:/apps/jdk/1.6.0_13/linux/jre/lib/jsse.jar:/apps/jdk/1.6.0_13/linux/jre/lib/jce.jar:/apps/jdk/1.6.0_13/linux/jre/lib/charsets.jar:/apps/jdk/1.6.0_13/linux/jre/classes:/tmp/yjp200811122006.jar
    Library path: /apps/jdk/1.6.0_13/linux/jre/lib/i386/server:/apps/jdk/1.6.0_13/linux/jre/lib/i386:/apps/jdk/1.6.0_13/linux/jre/../lib/i386::/edge/node3/current/lib:/home/eqdev/eqedgeuat/yourkit_7_5_11/yjp-7.5.11/bin/linux-x86-32:/edge/node3/current/lib:/home/eqdev/eqedgeuat/yourkit_7_5_11/yjp-7.5.11/bin/linux-x86-32:/usr/java/packages/lib/i386:/lib:/usr/lib

  • Help required from JDeveloper Development Team.

    HI there,
    I Download the JDeveloper 10.1.2 (1811) from OTN, But the downloaded archive file is unable to open. I did the download once again but I am facing same problem. I want to JDeveloper 10.1.2 for the installation of BI Beans 10.1.2.
    Help required from JDeveloper Development Team
    Thanks For Your Time,
    Regards,
    ViSHAL.

    Please use an informative Subject line, there is more chance that people will read the post.
    All we can suggest is that you try the download again.

  • Audit Log is required for Project server

    Hi,
    Audit Log is required for EPM / Project Server 2010 
    Following are the requirements.
    Project Name, Resource Name and Date of Following Events.
    1. Project checked Out By, Date (This is highly important)
    2. Project Checked In By, Date
    3. Project Published By, Date
    4. Project Saved By, Date

    Hi Hachishti,
    Please refer to a recent similar thread with excellent answer from Paul.
    http://social.technet.microsoft.com/Forums/projectserver/en-US/435fbb7a-1c82-419c-b83e-e89419dc66aa/project-server-2010-view-plan-save-history?forum=projectserver2010general
    Hope this helps.
    Guillaume Rouyre - MBA, MCP, MCTS

  • Not Authorized HTTP Error 401. The requested resource requires user authentication.

    Hi All,
    I have MDS web application on one server and MDS DB on another, both in same domain .
    MDS web application is created as new website on same IIS with SharePoint and have their own port assign
    In IIS Windows Authentication is added and enabled.
    Users do have function permission and module enabled.
    MDS is accessible only on server where web application is.
    When it is accessed from any computer within domain error is
    Not Authorized
    HTTP Error 401. The requested resource requires user authentication.
    Can anyone offer any suggestions?
    Thanks
    Zorko

    Hi Zorko,
    The issue may happen in case:
    1. The Master Data Service(MDS) web application is running under a domain user account
    2. You didn't register a Service Principal Name(SPN) for the account
    3. You are using fully qualified domain name(FQDN) or host name to access the MDS
    4. You are able to access the MDS by IP address(http://<ip address>)
    If I am right, it is because of the browser choose to use Kerberos authentication to connect to the MDS.
    So then, to fix the issue, please:
    Register SPN for the application pool account. Enable the delegation.
    Or, please force the web site to use NTLM authentication only.
    For more information, please see:
    How to use SPNs when you configure Web applications that are hosted on Internet Information Services:
    http://support.microsoft.com/kb/929650
    Forcing NTLM Authentication (IIS 6.0):
    http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/7258232a-5e16-4a83-b76e-11e07c3f2615.mspx?mfr=true
    Thanks,
    Jinchun Chen
    Jinchun Chen(JC)
    TechNet Community Support

Maybe you are looking for