Resource Tab Create/delete/Display role is not active

Dear Friends,
I have been trying to work on cprojects 4.0, i encountered one issues. I tried exploring all the threads on the forum related this issue, but i could not find any resource related this issue.
in Resource Tab Create/delete/Display role is not active, they are grayed out.
I have maintained all the authorization
1. Roles for my user id are:
SAP_CPR_PROJECT_ADMINISTRATOR
SAP_CPR_PROJECT_LEAD
SAP_CPR_USER
i also have SAP_ALL
0SAP_ADMIN Project Role 'Administration'
Default Authorization : ResMan,Write
Z13_CONSULTANT Consultant
Default Authorization : ResMan,Write
Z13_DEVELOPER Developer
Default Authorization : ResMan,Write
Z13_PROJEKTLEIT Project Manager
Kindly request your valuable inputs.
Thanks and Regards
Mukesh

Hi Mukesh,
Please go to following SPRO setting:
Collaboration Projects -> Resource management -> Qualification Management ->  Activate Qualification Search and Matchup Using WFM Core
Delete the X under Value abbr. for Group WFM and Sem. abbr. QUINC. This will deactivate use of WFM.
Hope this resolves your problem.
Regards,
Niraj

Similar Messages

  • In SFP transaction , when i press layout buton , give me error 'Direct display for documents not activated'

    in SFP transaction;
    when i press layout buton , it give me an error.
    SOFFICEINTEGRATION020
    'Direct display for documents not activated'

    Yes i installed .
    One of our product systems , i take  this error but  another one it works correctly . 

  • Macbook air runs hot and makes noise like processor running hard when connected to display - even when not actively using air book

    macbook air runs hot and makes noise like processor running hard when connected to display - even when not actively using air book

    You could use the free tool iStat Pro to see what changes when you connect your MBA to the display. Without doing anything the CPU pane should show a high percentage for "Idle". If the idle value is too low, launch the Activity Monitor and sort by CPU usage. There is a pane showing the different temperatures of your computer. Watch them for a few minutes after connecting the display.

  • How to create SAP_ALL Display Role without HR Transactions.

    Hi,
    Can someone help mem create an SAP_ALL Display only Role without HR Transactions.
    It takes lot of time to create a New role with SAP_ALL Template and manually change the Activity to display and de-activate HR Objects.
    Please let me know if there is any faster way to do this.
    Regards,
    MASQ.

    > Please let me know if there is any faster way to do this.
    Nope, there isn't. Besides that, only changing activity fields will not result in a display-only role. As said, please use the search and browse through the sticky threads.

  • Creating a custom role does not show up whe creating a user

    On portal 10.1.4 I have followed the directions in 10.1.4 Oracle Server Portal Configuration Guide.section 6.1.6.9.1 Example: Defining a User Administrator Role.
    However, the newly created role does not show up when I create a new user.
    Any suggestions?

    This is a bug in 10.1.2.0.2. It works if you create the group from the directory page OID

  • Create , delete "security roles" in weblogic console - sample Security providers

    Hi Everyone:
    Weblogic gave out sample Security Providers for version 7.0 and 8.1. In
    those sample Security Provider , the author of codes used property files as
    Security Providers Database, however he/she didn't show how to create a
    Manageable Sample Role Mapping Provider or Manageable Sample Authentication
    Provider, so Administrator of weblogic console can create and delete
    "security roles" in weblogic console.
    Have anyone known how to do that?
    Ming Qin

    "ming qin" <[email protected]> wrote in message news:[email protected]..
    Hi Everyone:
    Weblogic gave out sample Security Providers for version 7.0 and 8.1.In
    those sample Security Provider , the author of codes used property filesas
    Security Providers Database, however he/she didn't show how to create a
    Manageable Sample Role Mapping Provider or Manageable SampleAuthentication
    Provider, so Administrator of weblogic console can create and delete
    "security roles" in weblogic console.
    Have anyone known how to do that?
    I would ask in the weblogic.developer.interest.management.console newsgroup.
    >
    Ming Qin

  • BAM 11g - creating new report - More options not active

    I am creating new reports in BAM 11g. 11.1.1.3.0 Build 8553
    I can select the Data Object and Data Fields, but.... When I select any of the More options.... such as Create a filter or Create a calculated fied etc... I get the View Prompts screen and I cannot get out of it.
    The Properties object works, but as soon as I go back to the Data Objects - I am on the View prompts screen with several unlabelled tabs... and I can only OK, Cancel or Save.
    If I re-edit the reprt - I go straight to this View Prompts Screen... and can do nothing on the data objects.
    Rebooting makes no difference....
    Has anyone else seen this.
    I am using JDK 1.6.0_14... which i picked up from a post in the forum.... but this has made no difference.
    Thanks
    Cliff

    There must have been a typo or something when I reset the Java version.... re applying the copy of JDK 1.6.0_14 and restarting, Fixed the problem.

  • Users are created but Roles are not Provisioned in the Target System

    Hi,
    It would be great if somebody would provided solution to my problem. The problem is when I try to create the Users in Identity Managment UI then the Users are created in the Target systems but the Roles are not provisioned to the Users.
    In the provisioning job SetABAPRole&ProfileForUser,
    It is says In the Error putNextEntry failed storing
    Exception from Modify operation:com.sap.idm.ic.ToPassException: User does not exist
    MSKEY 58437
    Please note the When we create the User, the user is created however the Roles is not provisioned to the user.
    Regards,
    Hakim

    Hello Nits,
    since this thread is from 2010 and the OP was logged on last in 2012 (as you can see in the profile), I don't think you'll get an answer here.
    Please create a new thread to explain your problem (with version and SP numbers, logs etc). You can add a link to this thread to show, that the problem is similar.
    Regards,
    Steffi.

  • Short dump shown on click of Resource tab in cProjects.

    Hi Experts,
    This issue is happening for one project,
    on click of Resource tab, short dump is shown.
    Note
    u2022     The followin error text was processed in EPP the systm: Invalid parameters were transferred when calling.
    u2022     The error occurred on the application server sapbebr210_EPP_10 and in the work process. 8
    u2022     The termination type was: RABAX_STATE
    u2022     The ABAP call hierarchy was:
    Method: HAS_AUTHORITY_FOR_ACTIVITY of program CL_DPR_AUTHORIZATION_SERVICES=CP
    Method: GET_DATA_EXT of program CL_DPR_ENTITY_LINK============CP
    Method: GET_TASKS of program CL_DPR_PARTICIPANT============CP
    Method: GET_ALL_TASK_ASSIGNMENTS of program CL_DPR_API_PARTICIPANT========CP
    Method: RETRIEVE_BY_ASSOCIATION of program CL_DPR_API_PARTICIPANT========CP
    Method: IF_DPR_PROVIDER_ACCESS~RETRIEVE_BY_ASSOCIATION of program CL_DPR_API_APPLICATION_OBJECT=CP
    Method: RETRIEVE_BY_ASSOCIATION of program CL_DPR_API_BUSINESS_OBJECT====CP
    Method: IF_DPR_PROVIDER_ACCESS~RETRIEVE_BY_ASSOCIATION of program CL_DPR_API_BUSINESS_OBJECT====CP
    Method: IF_DPR_CORE_SERVICE_PROVIDER~RETRIEVE_BY_ASSOCIATION of program CL_DPR_API_CPROJECTS_CSP======CP
    Method: IF_DPR_CORE_SERVICE_ACCESSOR~RETRIEVE_BY_ASSOCIATION of program CL_DPR_API_CORE_SERVICE_MNGR==CP
    can you please suggest, what could be the reason on getting this dump.

    Hello Venugopal,
    thank you very much for these reports.
    They show me at least the mapping between Business Partner and a Role.
    Unfortunately the reports do not solve my problem, as the show me no inconsistencies.
    I still got the short dump when clicking on the resource tab or roles tab from a task.
    Now I deleted all tasks from the structure in the hope that it would do some effect, but the behavior is the same = short dump.
    On the other side I see all the business partner from the test report and must assume that they are still linked to the project and/or role - the role which i cannot reach because of the short dump.
    Any further advice or idea what I could do?
    thanks
    Darijo

  • Display role for all transactions

    Hi,
    We want to create a role with all transactions, but display only. (Same as SAP_ALL with display access only)
    I have read previously posted messages in this forum, but didn't find the solution.
    The SAP_ALL_DISPLAY role was available prior to 4.7. But we want to create role on WAS 6.4 onwards.
    Does anyone has solution for this?
    Regards,
    Prasad
    Message was edited by:
            Prasad Musale

    > Hi Alex,
    >
    > >>I fail to see a valid situation where users that
    > need to process transactions in production >>should
    > have access to execute every transaction, even if in
    > display mode.
    >
    > We have the development system. We are separating the
    > responsibility based on business functions such as
    > FI, MM etc. it may possible that FI consultant may
    > require a display access to transaction from MM. In
    > this case MM consultant will have MM roles only, but
    > will have the display all role. So that he can
    > perform his functions smoothly.
    >
    >
    > The solution you gave is working, but it does not
    > serve the purpose.
    > Any other solution?
    >
    >
    > Thanks,
    > Prasad
    Hi Prasad,
    My response was to Rajeswari's question rather than your situation which I appreciate is different to the one he was talking about.
    Creating a display role based on SAP_ALL with all activities set to display mode takes around 2 hours, it sounds like it would be worth your while creating it from scratch, though I appreciate that it is a tedious task!
    By using a display role in this manner you will still have the potential for access to functions that are controlled by shared objects, however the risk is reduced unless you give them access to debug & replace.

  • The top 1" of my screen is not active in anyweb site I go to .

    I downloaded firefox 7 , the top 1" of any website I go to the link tabs within that web site are not active.
    I can use the window explorer verision and all the tabs/links in the top 1" are active. I have removed firfox and reinstalled and has not solved the issue.

    The Yahoo! Toolbar extension and the Babylon extension have been reported to cause this issue. Disable or uninstall those add-ons.
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Email Account Created with a profile but not deleted when the profile was removed.

    When I was working on creating a mobileconfig file to lead our users through setting up their email I inadvertently created a script that would create two email accounts instead of just one.  When I removed the profile from the device it only uninstalled one of the email accounts it created.  When I go into the account that was left on the device the "Delete  / Remove" button is not there.  Any suggestions on how I can remove the orphaned account without reseting my device?

    Hello MM
    Welcome to Apple Discussions
    In the affected account (admin) go to: System Preferences > Universal Access > select the Seeing tab > now look down at the Display: section and make sure that Enhance contrast: is set to Normal.
    Dennis

  • How to not display nodes in a tree if Oracle roles are NOT used?

    How to not display nodes in a tree if Oracle roles are NOT used?
    We don't use Oracle DB roles to grant users access to Forms from the menu. We use a template and role system of our own. Basically a few tables with templates and roles.
    We want to convert our normal Forms menu to a tree menu and one of our key requirements is that when the tree is populated ONLY nodes with programs (i.e. forms) he has been granted to execute is shown.
    Since we don't use Oracle Roles how to do this in a tree?
    I created a function to show/hide LEAF nodes, BUT problem is that there are sub-menu nodes showing even if the leaf-nodes under it has not being displayed. My function has suppressed it.
    My tree query is like this:
    SELECT
         t.status, LEVEL, t.label, t.icon, t.node VALUE
    FROM
         tma_tree_menu t
    WHERE
    tma_authenticate_sys_chk_role(USER, t.node) = 1
    CONNECT BY
         PRIOR t.node = t.master
    START WITH
         t.MASTER IS NULL
    ORDER SIBLINGS BY
    t.position
    The tma_authenticate_sys_chk_role will return 1 only if the user has access to the form under that node.
    I tried the FTree functions in Forms but even that has nothing.
    Any help would be greatly appreciated.
    Edited by: Channa on Mar 17, 2010 6:49 AM

    Would you share the source code? I guess what I need is how exactly you retreive the user credentials from the DB table and set that boolean variable.
    and then how to condition it in UIX?

  • Tabs created with CMFCTabCtrl::STYLE_3D style didn't display the whole tab labels

    Hi,
    We use tab controls with multiple tabs created with CMFCTabCtrl::STYLE_3D style, but the tab labels are not displayed completely. For instance, the label should be "Process Control", but the tab header shows only part of it ""Process
    C...".
    How can I make the whole label being displayed?
    Thanks.
    MJ

    Hi mj118802,
    I think this is a by design issue, Form the picture, there is no enough space to show all your tab with the long label text. If you persiste want to use  CMFCTabCtrl::STYLE_3D style, you may need to draw your own CMFCTabCtrl.
    Please think about to use CMFCTabCtrl::STYLE_3D_SCROLLED style, see the picture.
    This is not too bad.
    Best regards,
    Shu Hu
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Restricting administrator tab to user created with default role OIM 11g R2

    Hi,
    I have a query, if we create a user in OIM 11g R2 without any admin role and then login to Self Service screen (Identity) with the newly created user, we can see the Administration Tab is visible to the user.
    Is this mean that by default user is having admin role assigned to him to do some of the admin activities.
    Please let me know how to control this behavior and not to show the Administration tab to the user until and unless he is having some admin roles assigned to him.
    Please help.

    You can hide Administration tab for normal users using EL's. By default users will get this tab when they login to identity console even though admin role is not assigned to them. But if you do any operation on any users, request will be raised accordingly.
    Check this link to configure EL's http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/uicust.htm#autoId18

Maybe you are looking for