ResourceBundleProject for Web page composer for labeling custom forms

Hello Experts,
We are using EP 7.0.18 WPC 18
I have created a custom web form for WPC and done KM configuration. It works fine.  We already had some custom web forms which are used.
For building a bundle file. I have downloaded the par file which we had on portal and imported it to NWDS. Added the three entries for the form I created.
The entries in WPC.properties file
cod.xlbl.wpc_custonlinklist=custom link list
cod.xtit.wpccustomlinkist=custon link list
xmlb_wpccustonlinklist=custom link list
xmlb_wpccustonlinklist=custom link list this label has been sucessfully replaced. But, cod.xtit.wpccustomlinkist=custon link list
label still shows up as
Please suggest.
Thanks,
Raj

I was deploying par file without source. After deploying it with source. it worked.

Similar Messages

  • New Web Form Based on Frames for Web Page Composer

    Hi,
    We are trying to build the below scenario of New Custom Web Form to use in Web Page Composer for Web Site Creation.
    We want to use the Web Form for Having Frames in the Output and
    Left Frame will contain the Table of Content List
    Right Frame Will Have the Details of the Selected Table of Content.
    I have Created the XML File and Now Trying to develop the XSL File to use frames.
    Any Ideas and Suggesstions on this?
    Thanks & Regards
    Sumanth

    If you export the project as exp file and open it with a zip file reader, you can find your forms under forms/ui/.
    I personnaly could always see them whatever the tool (jdev or composer) and the way (file or MDS) i used.

  • Web Page Composer for anonymous user

    Hello everybody,
    I configured my portal for Web Page Composer anonymous user access.
    I found this document and i follow all steps:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e06e2dfa-7759-2b10-1c89-e90e6877e606?QuickLink=index&overridelayout=true
    but when i launch portal with address:
    http://xxxxxx:50000/irj/portal/anonymous
    in the content view i see the portal logon page!!! if i lauch the page whit other user (after log-on) i see the WPS page correctly
    Any suggestion??

    And don't forget the anonymous group. Well the things you need to take a second look at are in de doucments.
    - Making CM ready for anonymous access
    - PCD (iviews, pages, folder, etc) should have anonymous access
    - are all the servies configured right
    - And make sure the right group have the right access in CM (KM)

  • Deactivate automatic content migration for Web Page Composer (WPC) 2

    Hi,
    on our production system we are using at the moment Web Page Composer for SAP NetWeaver 7.0. Soon we would like to upgrade the system to release 7.3
    We have now already set up the content for the new Web Page Composer on a pre-production system. After the production system is upgraded to the new release, it is planned that we will transport the content for the new Web Page Composer from the pre-production to the production system.
    As far as I know, the content of the old Web Page Composer gets automatically migrated during the upgrade of the production system. Due to the reason we will the use content of the pre-production system, the automatic migration step is not necessary anymore during the upgrade.
    Is there any configuration option that allows us to disable the automatic migration of old Web Page Composer content?
    Best regards
    Mario

    Regarding the feedback of the SAP support, it is not possible to deactivate the automatic content migration for the Web Page Composer.

  • Custom Layout for Web Page Composer

    Hi everybody,
    I'm tring to follow a guide, to create a custom layout for the web page composer.
    This guide:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/804bedee-377e-2e10-0f83-d5b33c743dbc?QuickLink=index&…
    I builded the portal project and I deployed it on the portal.
    Actualy i can see and select my custom layout and i can drop the element on the container from the page builder, but, when i save the content I can't see any elements anymore.
    If I publish the page I see my custom Layout... but empty, without any paragraph or article.
    Do u have any idea on why this could appen ?
    Best regards Enrico.

    <?xml version="1.0" encoding="UTF-8" standalone="no"?>
    <application>
    <application-config>
      <property name="SharingReference" value="knowledgemanagement,
                                                com.sap.portal.pagebuilder,
                                                com.sap.portal.navigation.navigationtaglibrary,
                                                com.sap.portal.useragent"/>
       <property name="SafetyLevel" value="no_safety"/>
    </application-config>
        <components>
            <component name="overview">
                  <component-config>
                    <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
                    <property name="ResourceBundleName" value="pagebuilder_nls"/>
                    <property name="SafetyLevel" value="no_safety"/>
                  </component-config>
              <component-profile>     
                <property name="ComponentType" value="com.sapportals.portal.layout"/>
                <property name="TagLibSAPLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
                <property name="TagLibSAPNavigation" value="/SERVICE/com.sap.portal.navigation.navigationtaglibrary/taglib/TagLibrary.tld"/>
                <property name="com.sap.portal.pcm.Title" value="Book (100,25|25|25|25)"/>
                <property name="com.sap.portal.pcm.Description" value="Book Layout (100% Top, 25% Bottom mostleft, 25% Bottom left, 25% Bottom right, 25 Bottom mostright)"/>
                <property name="com.sap.portal.reserved.layout.TemplateFile" value="book.jsp"/>
                <property name="AuthScheme" value="anonymous"/>
                <property name="com.sap.portal.reserved.layout.Cont1" value="top">
                <property name="title" value="Top Column"/>
                <property name="orientation" value="vertical"/>
                </property>
                    <property name="com.sap.portal.reserved.layout.Cont2" value="bottom1">
                        <property name="title" value="Bottom Column leftmost"/>
                        <property name="orientation" value="vertical"/>
                    </property>
                    <property name="com.sap.portal.reserved.layout.Cont3" value="bottom2">
                        <property name="title" value="Bottom Column left"/>
                        <property name="orientation" value="vertical"/>
                    </property>
                    <property name="com.sap.portal.reserved.layout.Cont4" value="bottom3">
                        <property name="title" value="Bottom Column right"/>
                        <property name="orientation" value="vertical"/>
                    </property>
                    <property name="com.sap.portal.reserved.layout.Cont5" value="bottom4">
                        <property name="title" value="Bottom Column rightmost"/>
                        <property name="orientation" value="vertical"/>
                    </property>
                    <property name="XML_Template" value="&lt;?xmlversion=&quot;1.0&quot; encoding=&quot;UTF-8&quot;?&gt;&lt;PageLayoutxmlns:xsi=&quot;http://www.w3.org/2001/XMLSchema-instance"xsi:noNamespaceSchemaLocation="../xsd/PBlayout.xsd"layoutID="pcd:portal_content/templates/pcc/layouts/1Top4Bottom_(100__25_25_25_25)"pageID="1Top4Bottom"><CustomAttributes><Attributekey="JSP_Template"value="gpar:/1Top4BottomLayout/1Top4Bottom"/></CustomAttributes><TableLayout width=&quot;100%&quot; height=&quot;100%&quot;cols=&quot;4&quot;/&gt;&lt;ContainersRow&gt;&lt;ContainercontainerID=&quot;com.sap.portal.reserved.layout.Cont1&quot;&gt;&lt;TableCellData width=&quot;100%&quot; height=&quot;100%&quot; colSpan=&quot;4&quot;vAlign=&quot;top&quot;/&gt;&lt;/Container&gt;&lt;/ContainersRow&gt;&lt;ContainersRow&gt;&lt;ContainercontainerID=&quot;com.sap.portal.reserved.layout.Cont2&quot;&gt;&lt;TableCellData width=&quot;25%&quot; height=&quot;100%&quot; colSpan=&quot;1&quot;vAlign=&quot;top&quot;/&gt;&lt;/Container&gt;&lt;ContainercontainerID=&quot;com.sap.portal.reserved.layout.Cont3&quot;&gt;&lt;TableCellData width=&quot;25%&quot; height=&quot;100%&quot; colSpan=&quot;1&quot;vAlign=&quot;top&quot;/&gt;&lt;/Container&gt;&lt;ContainercontainerID=&quot;com.sap.portal.reserved.layout.Cont4&quot;&gt;&lt;TableCellData width=&quot;25%&quot; height=&quot;100%&quot; colSpan=&quot;1&quot;vAlign=&quot;top&quot;/&gt;&lt;/Container&gt;&lt;ContainercontainerID=&quot;com.sap.portal.reserved.layout.Cont5&quot;&gt;&lt;TableCellData width=&quot;25%&quot; height=&quot;100%&quot; colSpan=&quot;1&quot;vAlign=&quot;top&quot;/&gt;&lt;/Container&gt;&lt;/ContainersRow&gt;&lt;/PageLayout&gt;"/>
          </component-profile>
        </component>
            <component name="meli_layout">
                <component-config>
                    <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
                    <property name="ResourceBundleName" value="pagebuilder_nls"/>
                    <property name="SafetyLevel" value="no_safety"/>
                </component-config>
                <component-profile>
                    <property name="ComponentType" value="com.sapportals.portal.layout"/>
                    <property name="TagLibSAPLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
                    <property name="TagLibSAPNavigation" value="/SERVICE/com.sap.portal.navigation.navigationtaglibrary/taglib/TagLibrary.tld"/>
                    <property name="com.sap.portal.pcm.Title" value="Meli Book Layout"/>
                    <property name="com.sap.portal.pcm.Description" value="Meli Book Layout"/>
                    <property name="com.sap.portal.reserved.layout.TemplateFile" value="meli_two_columns.jsp"/>
                    <property name="AuthScheme" value="anonymous"/>
                    <property name="com.sap.portal.reserved.layout.Cont1" value="top">
                        <property name="title" value="Left Column"/>
                        <property name="orientation" value="vertical"/>
                    </property>
                    <property name="com.sap.portal.reserved.layout.Cont2" value="top2">
                        <property name="title" value="Right Column"/>
                        <property name="orientation" value="vertical"/>
                    </property>
                    <property name="XML_Template" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot;?&gt;&lt;PageLayout xmlns:xsi=&quot;http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation=&quot;../xsd/PBlayout.xsd&quot; layoutID=&quot;pcd:portal_content/templates/pcc/layouts/1Top4Bottom_(100__25_25_25_25)&quot; pageID=&quot;1Top4Bottom&quot;&gt;&lt;CustomAttributes&gt;&lt;Attribute key=&quot;JSP_Template&quot; value=&quot;gpar:/1Top4BottomLayout/1Top4Bottom&quot; /&gt;&lt;/CustomAttributes&gt;&lt;TableLayout width=&quot;100%&quot; height=&quot;100%&quot; cols=&quot;2&quot; /&gt;&lt;ContainersRow&gt;&lt;Container containerID=&quot;testoSinistra&quot;&gt;&lt;TableCellData width=&quot;50%&quot; height=&quot;100%&quot; colSpan=&quot;1&quot; vAlign=&quot;top&quot; /&gt;&lt;/Container&gt;&lt;Container containerID=&quot;testoDestra&quot;&gt;&lt;TableCellData width=&quot;50%&quot; height=&quot;100%&quot; colSpan=&quot;1&quot; vAlign=&quot;top&quot; /&gt;&lt;/Container&gt;&lt;/ContainersRow&gt;&lt;/PageLayout&gt;"/>
                </component-profile>
            </component>
        </components>
    <services/>
    </application>
    <%@ taglib uri="prt:taglib:TagLibSAPLayout" prefix="lyt" %>
    <%@ taglib uri="prt:taglib:TagLibSAPNavigation" prefix="nav" %>
    <%@ page import="com.sapportals.portal.pb.layout.taglib.variabledef.RunMode" %>
    <lyt:template>
    <link rel="stylesheet" href="com.sap.km.cm.docs/meli_documents/Meli_common/Meli_css/meli_template_css.css" type="text/css"></link>
    <table border=0 cellSpacing=0 cellPadding=0 width="100%" height="100%">
        <tbody>   
            <tr>
                <td class="sfondo-testi-interni-dx" vAlign=top width="50%">
                    testo di prova cella 1
                    <lyt:container id="top" wrappingMethod="none" />
                </td>
                <td class="sfondo-testi-interni-sx" vAlign=top width="50%">
                    testo di prova cella 2
                    <lyt:container id="top2" wrappingMethod="none" />
                </td>
            </tr>
        </tbody>
    </table>
    </lyt:template>
    regards

  • Web page composer for creating static pages

    Hi there,
    I have a scenario where I need to develop static pages in Web page composer. That is I dont want to build a complete site but only static pages. And then I want to enable the Approval workflow from KM for these static pages. Can someone throw some light on this how I can acheive?
    Regards,
    Ponraj M

    Ponraj -
    Procedure
    1. In the Web Page Composer, navigate to the Web page that you want to integrate into the portal navigation.
    2. To copy the path to the Web page to the clipboard, choose Copy Path from the context menu for the Web page.
    3. Choose Content Administration &#8594; Portal Content.
    4. Choose New &#8594; iView from the context menu of a folder.
    5. Choose Portal Component as the source type.
    6. Choose the com.sap.nw.wpc.runtime portal archive. On the next screen to appear, choose default.
    7. Once you have created the iView, choose the Web Page Composer category in the property editor.
    8. In the RID of Compound Document property, enter the path to the KM folder representing the Web page.
    Example: /wpccontent/Sites/MyWebSite/Web Pages/MyWebPage
    You can paste this path from the clipboard.
    9. Open the workset or role that you created when you carried out the initial configuration.
    10. To add the iView to the workset or role, choose Add iView to Workset/Role &#8594; Deltalink from the context menu of the iView.

  • Web Page Composer for SAP Netweaver CE 7.1 !

    Hi ,
    I am working on SAP Neteweaver CE 7.1 and I want to know that whether the Web Page Composer component for Portal is also available for SAP Netweaver CE 7.1 as it also has an embeded Portal installation.
    Please reply ASAP.
    Manish

    Hi,
    Currently WPC is not part of CE 7.1 (neither is any part of KM). However, AFAIK it may be included in a future release of CE.
    Regards,
    -- Vladimir

  • I want Full Documentation for Web Page Composer to Create Full Fledged site

    Hi Experts ,
    I want to know the Full fledged Information And Docs how to make Intranet website Using WEb Page Compopser .
    Send me ur Docs and pdf * ANy screenshots to : venkat685atgmail.com
    Regards ,
    Venkat

    Hi Venkat,
    You might want to check the following resources for creating web sites:
    - SAP Help [Creating and Publishing web sites|http://help.sap.com/saphelp_nw70/helpdata/EN/46/792f9b608c0ad3e10000000a11466f/frameset.htm]
    - Web Page Composer content creation [blog|https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5924] by Roland Wilfer (check also Christopher Kaestner blogs about additional WPC features)
    Hope this helps.
    Best Regards,
    Joseph

  • Apllying css for Web Page Composer

    Hi all,
    I have created web page using WPC(Web Page Composer). I have applied styles in that content of the page. But it is not reflecting in Web page composer. How can I apply the css ?
    Thanks & Regards,
    Hemalatha J

    Hi Hema,
    check out the section "Adjust the Style of Web Content created with the new Web Form" of this presentation:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f010af35-d08c-2b10-b1ad-b4e2c5a9d247
    Hope this helps,
    Robert

  • Issue with New Web Form Created for Web Page Composer

    Hello,
    I created new Web Form as per the example given on sdn: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2041eb17-6001-2b10-b08d-b95ce55fa9b7
    Everything looks fine with all the setup but when I restarted the Portal, I am not seeing this new webform where we see Article, List, Banner and other webform to create new document in Web Page Composer section.
    Any idea what could be the reason behind this would be really helpful?
    regards,
    Jaish

    Hi Jaish,
    Can you please confirm if you have followed all the steps in here.
    The following configuration steps are necessary:
    1.Create a KM Resource Type
    2.Create a Web Resource Type and assign the KM Resource Type to it
    3.Extending the Configuration of Existing Web Resource Types and Containers
    4.Referencing the XSL File in the Stylesheet Object
    5.Creating a Stylesheet Group
    6.Referencing the XML File in the Document Type
    7.Restart the portal
    Make sure that you store the files in the following KM folders:
    The XML file in the /etc/wpceditor/types directory, the XSL files in the /etc/wpceditor/styles directory.
    Please refer to this link.
    http://help.sap.com/saphelp_nw70/helpdata/EN/45/599b78b0aa3bdde10000000a1553f7/frameset.htm
    Hope this helps.
    Cheers,
    Sandeep Tudumu

  • Trex for Web Page Composer

    Hi everybody!!
    I was  configuring an index for wpc but doesn't work. I followed all steps exactly as it is indicated in the document.
    The error "HTTP Status Code 500: Internal Server Error"   is displayed by xml files of Trex Monitor
    Thanks
    Regards.

    Hi Anja,  yes i can index other files in other repositories and  it worked well, at Display Queue Entries, i  saw that the error is only indicated in output.xml into Site/Web Pages/name of web page / output.xml of WPC , will  i need to configure other parameters for index?
    This is the complete line at Trex Monitor :
    wpccontent/Sites/Home/Web Pages/Home/Home@en@Nearshore/output.xml 6500 HTTP Status Code 500: Internal Server Error Preparation Failed Index 3
    I want to do something  similar to "How to Configure the Last Ten Documents" but with  wpc articles or web pages also i need that  their  links open in content area and not in new window , is it  possible? i tried with tree preview layout set but it didn't work only with xml forms.
    thanks for your reply =)

  • New Pagelayout in Web page composer and TREX problem

    Hello Experts-
    I have created a custom page layout for web page composer pages. I havent included it any bundle file to, because we use it only for english language.  Everything works as desired. But any new page created with this layout. System is not able to index it. Its fails to index with preparation failed error.
    Does it have anything to do with the budnle file?
    All other pages are getting indexed.
    We are on EP 7.018 version of portal and same withh web page composer too.
    Please let me know your thoughts.
    Thanks,
    Raj.

    Martin-
    I thought the problem was solved its not.
    I am seeing the following error message in the logs.
    [1800] 2009-09-11 14:55:42.266 e preprocessor Preprocessor.cpp(00897) : HTTPHEAD failed for URL
    http://host:50100/irj/servlet/prt/portal/prtroot/docs/guid/f035c289-f877-2c10-8989-af6c166e9bf9?prtmode=trex with Httpstatus 400
    [1800] 2009-09-11 14:55:42.267 e preprocessor Preprocessor.cpp(03553) : HANDLE: DISPATCH - Processing Document with key /wpccontent/Sites/AAA/webpages/home/output.xml' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 6400)
    [2057] 2009-09-11 14:55:45.458 e preprocessor Preprocessor.cpp(00897) : HTTPHEAD failed for URL
    http://host:50100/irj/servlet/prt/portal/prtroot/docs/guid/2047530a-fb09-2c10-6382-9e379fb332f7?prtmode=trex with Httpstatus 400
    [2057] 2009-09-11 14:55:45.458 e preprocessor Preprocessor.cpp(03553) :
    HANDLE: DISPATCH - Processing Document with key '/wpccontent/Sites/AA/WebPages/home/output.xml' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 6400)
    [1800] 2009-09-11 14:55:50.410 e preprocessor Preprocessor.cpp(00897) : HTTPHEAD failed for URL
    http://host:50100/irj/servlet/prt/portal/prtroot/docs/guid/2047530a-fb09-2c10-6382-9e379fb332f7?prtmode=trex with Httpstatus 400
    [1800] 2009-09-11 14:55:50.411 e preprocessor Preprocessor.cpp(03553) :
    HANDLE: DISPATCH - Processing Document with key '/wpccontent/Sites/AAA/webpages/home/output.xml' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 6400)

  • Are u using Web Page Composer? Would like to get ur feedback.

    Dear Fellows,
    Is anyone using Web Page Composer for prodution purpose yet? The point is I upgraded to NW04S SP 13 (specifically to install WPC) however its still buggy and not that user friendly.
    I was hoping that most of the issues will be knocked out in NW04S SP14 and I applied SP14 on my sandbox environment but those issue still exist.
    I intend to use it in my production server soon. May be I am missing something from my side; So is any of you using WPC successfully? If so, what release are you in?
    Thanks a lot,
    Deepak

    Hi Deepak
    I am involved in a project where we are using the WPC for content management on an external facing portal (soon to go-live), and I can share a bit of our experiences with the product.
    In my opinion the product still has quite a few places for improvement:
    - The procedure for creating new page layouts is (too) complicated and time-consuming.
    - We have encountered a problem with the wpc connector when using the light framework page (seems to work fine with standard framework page as I recall from our tests).
    - Errors from time to time when you edit a web page like others mention.
    - Navigation does not work for anonymous users after restart of portal until an administrator has navigated through the content.
    - You cannot set properties on the web page when editing the page, you only set properties for the content snippets (web forms), not the entire page. And because you search for the page, the attributes defines in the xml-file cannot be used in the search or elsewhere in the Flex UI. Actually you cannot use the properties you set on content snippet level to anything - else than giving some meta-information when editing the page.
    - Plus more, but I have not been involved in it all.
    We have had to make a lot of custom development because of lacking functionality, but some of that development is for sure because we use the External Facing Portal in our scenario.
    Hope it helps.
    Kind regards,
    Martin Søgaard

  • Web Page Composer

    Hi,
    I am working in EP NW04s SP 14. I am using web page composer for designing a web page. I have followed all the steps and finally assigned the web page in the navigation structure to both the anonymous user and the logged in user. I am able to view the details in logged in user. But the contents are not viewable for an anonymous users.
    I have given anonymous access to page layout, iview templates, security zone as mentioned in the thread
    Web page composer and end user
    We have anonymous access to KM content as specified in the note 837898. But still the contents are not displayed? Any specific reasons?
    Consultants worked in WPC, kindly help...
    Thanks & Regards,
    Ganesh N

    Hi Ganesh,
    Check my [reply|/thread/916997 [original link is broken]; to this similar post in the Knowledge Management & Collaboration forum.
    Hope this helps resolving your issue.
    Best Regards,
    Joseph

  • Content.css file in Web page composer

    Below are the styles I am using in a JSP file for Web page composer layout. Not  sure where to add the CSS file.
    Is it etc/wpceditor/css/runtime?
    How do I include it in my jsp? and Do I hve to restart portal after I upload the css file?
    table.wpc_3c_outertable
    tr.wpc_3c_outertable_row
    tr.wpc_hidden_row
    td.wpc_sdn_20_46_34_col1      
    td.wpc_sdn_20_46_34_col2        
    td.wpc_sdn_20_46_34_col11     
    td.wpc_sdn_20_46_34_col12     
    tr.wpc_sdn_20_46_34_col1_row
    td.wpc_sdn_20_46_34_col21     
    tr.wpc_sdn_20_46_34_col2_row
    table.wpc_3c_innertable  
    table.wpc_3c_innertable2 
    td.wpc_mainarticle1, td.wpc_footer      
    table.wpc_3c_outertable
    table.wpc_3c_innertable 
    table.wpc_3c_innertable2 
    td     { background-color: #FF9933; border: 1px solid #C0C0C0; }
    =====================
    will my layout work. If I add the following code to the content.css file?
    content.css
    table.wpc_3c_outertable, table.wpc_3c_innertable, table.wpc_3c_innertable2            
    tr.wpc_3c_outertable_row, tr.wpc_sdn_20_46_34_col1_row, tr.wpc_sdn_20_46_34_col2_row  { vertical-align: top; }
    td.wpc_sdn_20_46_34_col1
    td.wpc_sdn_20_46_34_col2
    td.wpc_sdn_20_46_34_col11
    td.wpc_sdn_20_46_34_col12     
    tr.wpc_hidden_row                     
    td.wpc_mainarticle1, td.wpc_footer      

    Vishal -
    First... we are all new to WPC!
    Second, no I don't think you need to create a new container.  I think that you just need to add the swf type as an allowed type for the container.
    So...
    Figure out which container you are trying to add the flash file to (as you mentioned, A1, A2, etc).
    Navigate to:
    Sys Admin --> Sys Config --> Knowledge Mgt --> Content Mgt --> WPC --> Containers.
    Edit the container you want to use.
    There will be a box named Allowed Mime Types.
    In here, select the "swf" mime type (make sure the check box is checked). Then Save.
    At my company, we had the WPC ramp up from SP12, and are now on SP13.
    I'm not sure what you get if the first time you had WPC is SP13, but for us I see two default A1 (and A2...B1..C4...etc) containers -- one that has "default" in the name and one that has "def" in the name.  From what I see, SP13 WPC uses the one with "def" in the name, not "default".  So, make sure you modify the one with "def" in the name.
    After you make this change, you should see "swf" in the list inside the container when you are editing a page.
    Is this clearer?  I wish I could attach a screenshot.

Maybe you are looking for