Resources and Skills for RFID implementation

Hi
Assuming that the project on hand is to RFID-enable the warehouse of a manufacturer with small operations (annual revenues around $50-100 million). Time frame: 3 months.
And the organization is already using SAP. So processes to be covered are material movement in warehouse and shipping/delivery processing only.
I would like to know:
1. How many persons would be required to implement RFID and what skills these persons must possess. I think we would need one MM, one SD consultant each (for warehouse and shipping processes). And one person with SAP AII?
2. Apart from the above, would we need individual persons for ABAP, XI, XML, Java?
3. What should be the background knowledge for a SAP AII person? Do we train a ABAP person to become a SAP AII expert? Is it that SAP AII person in a project must know ABAP and/or Java?
Thank you for your time!!
Regards
Sankar

Hi
1. How many persons
One MM -> OK
One SD -> OK
And you need one Person who make the thinks runing on the AII-System
2. Other individual persons
In some scenarios it's good to have a person in the project who knows XI well.
You will need this person only a few days.
You do not need a person with Java Know-How since AII ist in ABAP-OO and in XI the Java-Part for your scenario will be very little
3. Background for a SAP AII person
Look for someone with good ABAP-Skills. It wood be good if this person knows something about ABAP-OO (since the so called activtys in AII are ABAP-OO classes and methods). It would be good if this person has an idea about XML (no deep, but at least some basics).
The SAP AII person don't need Java at all.
4. Other Project members
Someone has to install a device controller. This is that peace of software witch translates the events from a RFID-Reader in a XML-Message for the AII.
Usually this is done by a partner.
I hope this helps.
Kind regards
Herbert

Similar Messages

WAAS Rjct Resources and conditions for asymmetric traffic

Hello,
I have a customer network of 30 WAE's connected to an MPLS cloud. Interception method is inline for all WAE, and WCCP for NM-WAE.
Of those WAE's (running 4.1.1c), I have 3 that are connected in Datacenters, as such they are expected to receive most of the traffic and have been dimensioned as OE7341 appliances.
It is my impression that this network statistics are not as good as they should be: Some of the optimizations factor are at 1.2 or 1.3X and most are simply 1.0X.
My impression is that there is a lot of passthrough traffic, and although some of it is configured as so on the application policies, when I check statistics pass-through on several WAE's on the network I see that the Rjct Resources is very high in a particular WAE in a Datacenter - that has a 7341 Box (12Gb RAM!) - and I also do get non-zero counters on other boxes.
Is there any way to see on a given moment how many connections are going through the box so that I understand if I'm really facing a box capacity issue? The initial shows I did didn't look as there were that many connections running through the box, but if I checked them live I saw about 65 Rjct Resource connection at a given time.
Can anybody shed some light on this particular statistic?
sghmansin--17w#
sh statistics pass-through
Outbound
PT Client:
Bytes 4081578138946
Packets 11567591648
PT Server:
Bytes 8833662508567
Packets 13797553929
Active Completed
Overall 0 0
No Peer 7 141742513
Rjct Capabilities 0 0
Rjct Resources 65 273669865
App Config 6 25610854
Global Config 0 0
Asymmetric 1 1597096
In Progress 97 453847516
Intermediate 0 0
Overload 0 0
Internal Error 0 478
App Override 0 0
Server Black List 0 150553
AD Version Mismatch 0 0
sghmansin--17w#
One other observation is that pass-through through asymetric is also very frequent. Given that the customer is mostly using inline interception, even if a connection comes through a WAN/LAN interface pair and exits through another, the optimization should still be done.
The datacenter designs are dual-homed active/passive, and traffic goes through the same (and only) WAE box. The customer assures me that there is no asymetrical traffic.
Can anybody explain to me how is the decision made to mark a given flow as asymmetrical (and them pass-through it)?
Thanks
Gustavo Novais

Hi Dan, Thank you for your reply.
That show was just from one of the boxes, in this case on the Datacenter.
For instance I also see asymetricals in NM-WAE's configured for WCCP. But the number is not that substantial, which makes me believe the interception is well configured (unfortunately the routers are managed by a third party, and I am yet to have access to their config).
All boxes on this network have Enterprise License activated.
How can I check on a given moment all connections count on the box? is there any MIB oid pollable to check that?
Do passthrough connections count to the overall limit?
While doing the diagnostics on the WAAS devices there was in deed a WAAS device marked as having asymetrical traffic, but many others have PT Asym connections and have not been marked as such by the diagnostics?
How does the diagnostic work? Is it a instantaneous dianostic (i.e. checks connection table at time T to see if any of the current connections is PT Asym )?
If on the far end of a connection we do have an asymetrical network topology, does the near end also mark the same connection as PT Asym, or will it simply say No Peer?
thanks
Thanks

Good resources and examples for making beautiful things

Hello ,
I am new in flash and I know how to work with tools and create some shapes but my problem is that I cannot create beautiful things with good filters and such like and it is because I have not seen good examples .is there any website or anything else as resource and example which I can learn how to create beautiful items(like using filters or making 3D objects and beautiful shapes and using color to give effect)?

Hi Immigrantbird,
I'm not sure if you're after a more design oriented resources rather than a flash specific one.
It might be worth doing a wider search on graphis / design principals rather than just specifically flash.
You could check out some of the examples at:
http://unitzeroone.com/blog/labs/
http://unitzeroone.com/blog/
Regards
Chris

AppleScript resources and examples for Numbers 3

As Woggledog points out in this thread Numbers 3 now has AppleScript support (as of version 3.1). The linked article in turn has a link to some helpful resources, including working examples, at Mac OS X Automation.
It appears that the AppleScript support in Numbers 3 is now on a par with Numbers 2, perhaps already slightly better, and that many old scripts will work after minor adjustments.
Does anyone have other examples or links to sites showing useful things that can be done with AppleScript and Numbers?
SG

Hello SG,
Sorry i used this link to get in touch with you since i don't know how to get in touch directly with participants.
I had a reply on my concern by Quinn who told me you could perhaps help.
This is all about nested popup menu.
I triad to apply the process according to this thread, but honestly I came quickly to a wall.
I took snap shots of my table to make you understand what I wish to do (certainly quite common but my skills are poor).
I wrote some comments on the pictures to help. I hope it will...
In reference to the thread, Invoice would be the "Order Form" of the thread, and 2nd picture down below would be the "Products".
The 3rd picture is a table with prices of the rooms.
There are of course tables for each type of products.
I hope it is not too confusing.
This is my invoice:
In the first column PRESTATION i want the operator to choose in a popup list what has been sold (night, lunch, diner, bar, spa, transport, …) and then in the DESCRIPTION column i want another popup list appearing with products in accordance with what the operator chose in PRESTATION.
For example the operator chooses in 1st column the NIGHT (Nuitée in french), then DESCRIPTION column same row should come up with a popup list of the rooms (A, B, C, D, E, F, G) so the operator can choose what has been purchased.
Cherry on the cake: an automated unit price of the room should also appear in the PRIX A L'UNITE TTC column (Unit Price) depending on this choice of the room, and also status of the guest (low season rental, high season, friend-family, staff, tour operator customer, ...). The status of the customer is defined in a popup list in another sheet.
And of course, I would like this process to apply to all purchased made (this is what i tried to show with this table with colored arrows):
If in column 1 you provide Night, column 2 opens on a list of rooms, if it is transport then it opens on transport providers, if bBar then it opens on list of beverages, etc ...
As I said, if the price can be displayed automatically in the desired column Unit Price ... that would be perfect.
If i want to use the process of nested popup menus proposed in the thread, with that kind of complications, it becomes quite tough.
So I had been told the things can be automatized through an Applescript process. But this I don't one thing about this language, or even Automator.
Therefore, I guess it makes it rather difficult to find a "soft solution" to my problem.
What is unclear to me is why Apple does not develop expressively this feature since it is most useful.
Anyway, thank you for your time and professionalism on this one.
Lionnel.

Foreign Exchange Realised and Unrealised for the implementation of 2 Eq Typ

Dear Experts,
We really appreciate for your advices on our issue below.
We have Joint Venture Accounting module implemented in our system. We are about to implement 2 equity types that are active at the same time in one company code. With this, cost objects will be divided by these 2 equity types as well since each cost object must be assigned with equity type.
What become our concerns are how to accomodate these 2 equity types cost object assignment on Realised and unrealised exchange rate line items. These line items are expected to be assigned with the appropriate cost object based on equity type and equity group derived from the original expense line item.
We tried to utilize FI and JV substitution that restricts based on equity type and equity group without involving OKB9 cost object assignment but the FI and JV substitution could not work. The system requires us to assign Realised and Unrealised Cost Object through OKB9. When we activate the OKB9, the line items can be successfully assigned but this does not meet our requirement for 2 equity types since OKB9 can only accomodate one cost object for 1 cost element which means it only accomodates 1 equity type.
I really appreciate for your advices on how to set automatic cost object assignment on Realised and Unrealised Exchange Rate Difference that accomodates 2 equity types.
Thank you
Cheers,
Frans Sunarja

Hi IAMChrisL,
Any updates?
Frank Wang
TechNet Community Support

SAP Roles and Access for SAP Implementation team members

Hi,
Is it correct practice to give SAP_ALL role access for all SAP Implementation team members in Dev and QA?
If not, what is the correct practice?
Kindly let me know

Madhu,
It is NOT correct practice to give anyone SAP_ALL in any of the systems; not DEV, not QAS, and certainly not PRD. However, many implementation teams (and particularly consultants from SIs) insist that they cannot possibly do their jobs without it. This is completely incorrect as there are specific roles for them to use for that purpose. The only circumstance where it could be justified is if you require a special "firefighter" role - and even then, I would still be a bit doubtful.
You should also consider that once you have given someone SAP_ALL, they will fight tooth and nail to keep it. It also means that they probably are not testing the user roles correctly. Most of those that insist they need it simply do not understand the security issues and probably don't care.
Just think; if they have access to do soemthing that they shouldn't and then cause a big problem, are they the ones that will have to fix it or are they going to expect you to do it? If they expect you to clear up after them, then you have the right to insist on restricting their access to cause issues in the first place.
But I know just how demanding they can be....
Best of luck
Tony

Need a document with steps and process for IBCM implementation

Dear Frds,
I need a documents which contains steps and process to implement IBCM for SCCM2012.
I have following things in Intranet:
1) SCCM2012 in intranet and clients are reporting at this movement.
2) Intranet based Domain PKI infra.
Thanks.....
Raja

I strongly suggest taking a look at Direct Access. Most people looking at IBCM end up going with Direct Access since it requires fewer steps/less infrastructure and yet provides far more value.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Login to Adobe account fails for all web resources and has for a week.

Somehow it let me post a reply to one of my posts in this forum, and I'm hoping it will allow me to post this new thread as for the rest.... I'm posting here because this is the first place it has let me post, and I'm trying to get FB4.7b to ACCEPT the serial number Adobe gives when you download the installer OR... on the off chance that that never would work but might somehow work in b2, download and install b2 and see if it will accept the serial number then. Very disconcerting to watch your 'trial period' count down when you -own- FB 4.5/6 and have a valid serial number and the one given as a dummy s/n fails. Cheers!
For instance:
Attempting to download FB4.7b2: from http://labs.adobe.com/technologies/flashbuilder4-7/to http://www.adobe.com/cfusion/entitlement/index.cfm?e=labs_flashbuilder4-7
http://www.adobe.com/cfusion/entitlement/index.cfm?e=labs_flashbuilder4-7Trying to access my account details here (It shows Bramblethorne as logged in and gives me the Sign out) option.
Trying to post a comment to an article in the online documentation
I've tried to access other locations, developer/help/download/forum/etc and they all fail as well.
All result in the following
Error processing your request
We're sorry, we encountered an error processing your request.
Please try your request again. You may wish to try one of the following links:

Somehow it let me post a reply to one of my posts in this forum, and I'm hoping it will allow me to post this new thread as for the rest.... I'm posting here because this is the first place it has let me post, and I'm trying to get FB4.7b to ACCEPT the serial number Adobe gives when you download the installer OR... on the off chance that that never would work but might somehow work in b2, download and install b2 and see if it will accept the serial number then. Very disconcerting to watch your 'trial period' count down when you -own- FB 4.5/6 and have a valid serial number and the one given as a dummy s/n fails. Cheers!
For instance:
Attempting to download FB4.7b2: from http://labs.adobe.com/technologies/flashbuilder4-7/to http://www.adobe.com/cfusion/entitlement/index.cfm?e=labs_flashbuilder4-7
http://www.adobe.com/cfusion/entitlement/index.cfm?e=labs_flashbuilder4-7Trying to access my account details here (It shows Bramblethorne as logged in and gives me the Sign out) option.
Trying to post a comment to an article in the online documentation
I've tried to access other locations, developer/help/download/forum/etc and they all fail as well.
All result in the following
Error processing your request
We're sorry, we encountered an error processing your request.
Please try your request again. You may wish to try one of the following links:

Resource requirement for EHS implementation

Hi EHS Gurus
I want to know the resource requirement and their skill set for EHS implementation & support project?
As per my knowledge for implementation 4 consultants are required :-
2 EHS consultants,1 MDM consultant,1 Abaper
Please confirm it.
Next do we require SD or MM conultant in EHS implementation or support prj?
Thanks in advance.

Hi,
Estimation of Resource Requirement can be done based Size of Business or scope document
like No of plants and employess
Which sub modules they are going to be implement like Product safety, Dangerous good management
This module more related to MM and QM
one ABAper required for New reports and Dat migration at Final configuration stage
Thanks
sreeni

How to Implement the same functionality of IT1610 and IT1641 for CANADA

Hi experts,
We have done HCM Implementation to US and now moving to CANADA. We got the requirement to create two custom OM infotypes which are similar of IT1610 and IT1641 in US specific. But when I check the functionality of IT1610, it is maitaining by calling a view T5U13. It looks like some complex logic is there behind the screen. I am able to create basic custom infotype but not able to implement the logic to calla a view (T5K13 in CANADA) through PP01 or PO03 and then maintain the view as well as the infotype. How the view screen is embeded in creation of IT1610 screens.
Could you please help me on providing the solution for this?
Thanks for your time and waitaing for your valuable reply.
Regards,
Jp

Hi Idrees,
You need two grids and at least 3 datatable.
Grid 1 bound to DataTable 1 - This will list all the Items, nothing special about this one.
Grid 2 bound to DataTable 2 - This will list selected batch for current selected Item in Grid 1.
DataTable3 - This will hold all the selected batches for all the items in Grid 1.
Now you need to refresh DataTable 2 based on the Selected item in DataTable 1.
When the user click on a row in DataTable 1, you need to do 2 things :
1. Read all the records of DataTable 2 and sync it to DataTable 3.
2. Read all the records of DataTable 3 where the Item Code belongs to the Item selected in Grid 1 populate it into DataTable2.
Tedious, but will do the job.
When the user click Add/Update button, write the records of DataTable1 and DataTable3 into database.
Regards
Edy

Overlapping events for resources and locations

Has anyone been able to configure iCal Server's Resources and Locations to NOT accept invitations if the resource or location is busy?
I am hoping the resource or location is intelligent enough to decline an invitation if it is already busy.
Any help would be appreciated.
Thank you,
Ray

I've run into this problem as well. I can't believe that there's no solution to this. It seems to me to be a pretty obvious need for any scheduling software.
Why even have a location and resource database, if users can make any event appointment for that location or resource regardless if it's available or not?

When to use @Resource and when to use @EJB for dependency injection

Hi,
When do you use
@Resource and when do you use @EJB for dependency injection?
Thanks

Captain obvious: Use @EJB for injection of EJBs, and @Resource for everything else.
There was a discussion about this very topic quite recently, perhaps you can find it through the search.

Documentation for as is, to be,and gap analysisin sd implementation project

how to prepare documentation for as is, to be,and gap analysisin sd implementation project?

Dear Chandu,
Please go through this link it will help you about ASAP methedology(AS IS process , TO BE process and GAP anolysis) to Implement a SAP project.
http://www.sapedition.com/5/asap_methodology.html
I hope it will help you,
Regards,
Murali.

Help-study material for rfid and sap integration required

please any body can help me to get study material for sap-RFID integration

Here's some additonal ideas from SAP Education:
Education website http://www50.sap.com/useducation. Although the education website url will not direct the person to any specific courses if you type in 'RFID' and then press enter; seven courses that include RFID are listed and offered through SAP education.
The RKT website(Rampup Knowledge Transfer on Service Marketplace) https://websmp202.sap-ag.de/rkt-rfid will direct a person to RFID specific course material.
The http://www.sap.com/rfid website is another good site for RFID information but does not list education courses. A person will find whitepapers and introductory information there.
cheers,
Marilyn

I just paid the $9,99 a month to have access to Photoshop and lightroom. I am having trouble installing the programs and when I installed on Photoshop it said "trial"- this isn't suppose to be a trial but a resource I pay for monthly for a year right?

I just paid the $9,99 a month to have access to Photoshop and lightroom. I am having trouble installing the programs and when I installed on Photoshop it said "trial"- this isn't suppose to be a trial but a resource I pay for monthly for a year right?

What turns the trial into the live software is signing in. If you sign in with the Adobe ID that has the subscription, the trial becomes live. First check your account on Adobe.com to make sure that the subscription is live.

Resources and Skills for RFID implementation

Similar Messages

Maybe you are looking for