Resources automatically deactivating when removed from Active Directory

This is a simplified version of my previous question:
What causes some resources to successfully deactivate when removed from AD, while other Project Server 2010 accounts have to be made inactive manually?
Also, if a resource is made inactive or deleted in Project Server, is it expected that their SharePoint account will be completely deleted?
Thanks!

When you remove the user from AD group, that account will become inactive in the next AD synchronization in Project Server. When the account is inactive, it will be removed from the PWA as well as all the workspaces.
In 2007, if you make the user inactive, it will deactivate project server access, but the user can access the project workspaces
In 2010 onwards, When the account is inactive, it will be removed from the PWA and workspaces.
Cheers. Happy troubleshooting !!! Sriram E - MSFT Enterprise Project Management

Similar Messages

  • Mobile account login delay when offline from Active Directory

    We're getting a few MacBook Pros setup with our AD domain. All is well while on the network, but when traveling, it takes our users about 20-30 seconds to login, presumably because the client is trying to authenticate against a domain controller. Accounts are setup as mobile accounts so the credentials are cached locally.
    It's frustrating that a solution isn't more readily published by Apple given how common a use case this is. It shouldn't be buried somewhere in a forum.

    I figured it was because AD was somehow being looked up. I got it nailed down the the wireless connection. Turning off the AirPort connection is not a viable option as not all users are savvy enough, or remember to turn it off before taking their laptop home. One instructor was setup this way and she's isn't happy with the "resolve".
    On further research, I have determined a plausible solution, at least with Mac OS 10.4.7. I haven't tested anything earlier. Open the System Preferences and then Network. Show the AirPort configuration, then click on the Option button located next the checkbox to show the AirPort status in the menu bar. There's a checkbox in there to "Disconnect from wireless networks when I log out." By checking this, the wireless connection will be disconnected but the card will remain on. This will force the computer to use the cached credentials on log in. When the user logs in, the computer will attempt to reestablish a connection with the wireless network.
    I'll let you know if this works with other Macs as well.

  • Best Way to Remove Server from Active Directory

    I was wondering the best practice to remove a server from AD according to Microsoft.  
    Option 1 :
    Login to server and take it off the domain and put it into a workgroup
    Then login to AD and make sure it is removed
    Confirm removal from DNS
    Option 2 :
    Login to Domain Server and manually remove
    Confirm removal from DNS
    Thanks
    Also the servers are running Windows 2008 R2

    So if its just a file server, I would just go with option 1 to ensure the cleanest removal from Active Directory?
    What would happen if I just removed it from Active Directory after powering it down?  Still a clean result?  Or is it considered best practice to take the server off the domain from the server then power it down and then remove from Active Directory?
     Please let me know and also if you want me to clarify.
    I am not sure if I understood you correctly but if you just right click the computer object in Active Directory and delete it you have to manually delete the DNS records as well or wait for scavenging period to delete the outdated DNS records.
    Mahdi Tehrani   |  
      |  
    www.mahditehrani.ir
    Please click on Propose As Answer or to mark this post as
    and helpful for other people.
    This posting is provided AS-IS with no warranties, and confers no rights.
    How to query members of 'Local Administrators' group in all computers?

  • User profiles from Active directory when loggedin then userdisplay, useredit shows blank white screen in SharePoint 2013

    User profiles from Active directory when loggedin then userdisplay, useredit shows blank white screen in SharePoint 2013 
    I can login with the these AD users and AD direct import is working just fine. We are not using UPS.
    With admin user when I click on the user it shows up proper data. But when I login with the same user it does not show me userdisplay/useredit and shows blank data. Also another strange thing is when I add new item in list with these AD users created by
    modified by is blank and its really strange. I checked user information list, tried to rerun user sync with direct AD import option but no success.
    MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

    Hi Amit,
    According to your description, my understanding is that the page is blank when the use accessed /_layouts/15/userdisp.aspx and the created by field was blank when the user created a new list item in SharePoint 2013.
    I tested the same scenario per your post, however I cannot reproduce your issue.
    For troubleshooting this issue, I recommend to verify the things below:
    Check the permission of the user in the corresponding site collection to see if he can access /_layouts/15/userdisp.aspx.
    Delete the user from AD and SharePoint, then re-add the user to AD and grant proper permission to the user in SharePoint to see if the issue still occurs.
    Did this issue occur with all the users? Add a new user in AD and test the same scenario.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Feature Request - Do not unlock automatically when removing from Holster

    Currently, when the device placed into a BlackBerry OEM holster and then removed, it will automatically unlock the screen unless you have a password set, in which case you'll be prompted for the password instead.
    I would like to see an option added to disable automatic unlocking upon removal from the holster, regardless of whether a password is set or not (so that when you remove the phone from the holster, you must still manually unlock it using the power/lock button, swipe up from the bottom of the display, or using the U+Enter keyboard shortcut).
    Solved!
    Go to Solution.

    You are on fire @Zeridialous!  Thanks for another great idea! 
    I'll make sure your feedback is shared internally  
    Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
    Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

  • ActiveSync mail/contacts/calendars removed after Active Directory account is locked out?

    Hey guys,
    Wondering if anybody has seen an issue like this.  This is a new Exchange 2010 deployment (8+ CAS servers) and the devices are all iPhones/iPads running the latest version of iOS (7.1.2).  The CAS servers are behind a load-balancer.
    Basically when a users' Active Directory account is Locked in AD (either manually or by entering the wrong password) their ActiveSync Contacts, Calendars and all Mail folders (except the Inbox strangely!) will be removed from the iOS device within a few hours.  So an account might get locked out at say 6pm, if left locked out by the next morning the ActiveSync account will still be setup on the device as normal, but everything is gone except the mail in the Inbox.  If a user has an iPad and iPhone both will be blanked.
    The behaviour is similar to what is documented here - iOS: How to mitigate a full sync or reload of Exchange account data - however the Exchange servers are not issuing HTTP500 errors as we have captured logging during the window where the device blanks itself.
    Any thoughts would be appreciated!
    Thanks!

    Hello,
    which event ids are shown in the event viewer from the DCs? Or maybe locally also some errors are locked that give some more details.
    If this happens it sounds personally for me that Java is the problem. Have you already opened a call at
    https://community.oracle.com/welcome ?
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://msmvps.com/blogs/mweber/
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

  • Things to consider when removing from AD domain a SQL Server 2008 which includes Reporting Services

    Do any one have a link to a list of things to consider when removing from AD domain a SQL Server 2008 which includes Reporting Services, Analysis Services and Integration Services?
    I am taking from an Active Directory domain several servers with SQL 2008 and Reporting Services, Analysis Services and Integration Services. The server will stay on its own without association to any domain, the server will keep its IP address and
    the server will not change names.
    I have done some research and I got the basic steps including, removing the user accounts from the domain, changing the services accounts, changing jobs and databases from being owned by users from the domain. But...
    Are there other things in Reporting Services, Analysis Services and Integration Services internal databases that have an association with the domain AND that will fail after no longer being in the domain?
    I've heard of Reporting Services subscriptions failing when the domain user account is no longer there...Are there any other got ya's that any one has encountered?
    Please advice.
    Note: I am posting in this forum basically because of what I heard on Reporting Services, but it may be a better idea to post into a more broad forum such as SQL Server Migration section.
    Thanks beforehand
    Paulino

    Do any one have a link to a list of things to consider when removing from AD domain a SQL Server 2008 which includes Reporting Services, Analysis Services and Integration Services?
    I am taking from an Active Directory domain several servers with SQL 2008 and Reporting Services, Analysis Services and Integration Services. The server will stay on its own without association to any domain, the server will keep its IP address and
    the server will not change names.
    I have done some research and I got the basic steps including, removing the user accounts from the domain, changing the services accounts, changing jobs and databases from being owned by users from the domain. But...
    Are there other things in Reporting Services, Analysis Services and Integration Services internal databases that have an association with the domain AND that will fail after no longer being in the domain?
    I've heard of Reporting Services subscriptions failing when the domain user account is no longer there...Are there any other got ya's that any one has encountered?
    Please advice.
    Note: I am posting in this forum basically because of what I heard on Reporting Services, but it may be a better idea to post into a more broad forum such as SQL Server Migration section.
    Thanks beforehand
    Paulino

  • Getting list of all users and their group memberships from Active Directory

    Hi,
    I want to retrieve a list of all the users and their group memberships through JNDI from Active Directory. I am using the following code to achieve this:
    ==================
    import javax.naming.*;
    import java.util.Hashtable;
    import javax.naming.directory.*;
    public class GetUsersGroups{
         public static void main(String[] args){
              String[] attributeNames = {"memberOf"};
              //create an initial directory context
              Hashtable env = new Hashtable();
              env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
              env.put(Context.PROVIDER_URL, "ldap://172.19.1.32:389/");
              env.put(Context.SECURITY_AUTHENTICATION, "simple");
              env.put(Context.SECURITY_PRINCIPAL, "[email protected]");
              env.put(Context.SECURITY_CREDENTIALS, "p8admin");
              try {
                   // Create the initial directory context
                   DirContext ctx = new InitialDirContext(env);     
                   //get all the users list and their group memberships
                   NamingEnumeration contentsEnum = ctx.list("CN=Users,DC=filenetp8,DC=com");
                   while (contentsEnum.hasMore()){
                        NameClassPair ncp = (NameClassPair) contentsEnum.next();
                        String userName = ncp.getName();
                        System.out.println("User: "+userName);
                        try{
                             System.out.println("am here....1");
                             Attributes attrs = ctx.getAttributes(userName, attributeNames); // only asked for one attribute so only one should be returned
                             System.out.println("am here....2");
                             Attribute groupsAttribute = attrs.get(attributeNames[0]); // memberOf
                             System.out.println("-----"+groupsAttribute.size());
                             if (groupsAttribute != null){
                                  // memberOf is a multi valued attribute
                                  for (int i=0; i<groupsAttribute.size(); i++){
                                  // print out each group that user belongs to
                                  System.out.println("MemberOf: "+groupsAttribute.get(i));
                        }catch(NamingException ne){
                        // ignore for now
                   System.err.println("Problem encountered....0000:" + ne);
                   //get all the groups list
              } catch (NamingException e) {
              System.err.println("Problem encountered 1111:" + e);
    =================
    The following exception gets thrown at every user entry:
    User: CN=Administrator
    am here....1
    Problem encountered....0000:javax.naming.NamingException: [LDAP: error code 1 -
    000020D6: SvcErr: DSID-03100690, problem 5012 (DIR_ERROR), data 0
    ]; remaining name 'CN=Administrator'
    I think it gets thrown at this line in the code:
    Attributes attrs = ctx.getAttributes(userName, attributeNames);
    Any idea how to overcome this and where am I wrong?
    Thanks in advance,
    Regards.

    In this sentence:
    Attributes attrs = ctx.getAttributes(userName, attributeNames); // only asked for one attribute so only one should
    It seems Ok when I add "CN=Users,DC=filenetp8,DC=com" after userName, just as
    userName + ",CN=Users,DC=filenetp8,DC=com"
    But I still have some problem with it.
    Hope it will be useful for you.

  • Link DN with information coming from active directory

    I have setup a Unified CM and IM/presence server. The Unified CM server is connected to LDAP active directory to authenticate the users that login via the Cisco Jabber Windows client. I have configured CSFdevices for each user and created a DN which has the same number as the normal phone line number. The users logging in to the cisco jabber client appears well as reachable in to the client for the other user that are logged in. However when I try to call them (via the number that comes from active directory) this doesn't work. (busy number) When I type the number that I have configured as a DN I succeed to make a connection with a different user.
    Any idea how to link the DN from the CSF softphone with the information that comes from Active directory.
    Any help would be appreciated.

    Forget about application dial rules mate, if you do desk phone control using Jabber, and you dial a person  using that person's telephone attribute in AD, just put a translation pattern in place. That should work.
    that way you can also use DNA for troubleshooting purposes.
    Alternatively, you can populate the ipphone in AD and populate that with the extension that is configured on the phone/CSF device and alter the LDAP atrribute mappings in Presence  (applications>cisco jabber>jabber settings).  but this will not solve your problem if you use like iphones, ipads .
    =============================
    Please remember to rate useful posts, by clicking on the stars below.
    =============================

  • Could not connect to the Active Directory. Active Directory Certificate Services will retry when processing requires Active Directory access

    Event properties – Event 91, Level Error, Event ID 91, Date and time 5/10/2012 11:29:48AM, Service CertificationAuthority
    General: 
    Could not connect to the Active Directory.
    Active Directory Certificate Services will retry when processing requires Active Directory access.
    We have a Windows 2008 Server Enterprise with AD . I would like to enable the service  "Certificate Services"  that
    allow me to enable radius to authenticate users wireless with the active directory.

    Hi, 
    Can you please check this forum or someone from Microsoft, as we have post here dating back from October that are not being answered.
    Everything for us is exactly the same as szucsati and Racom
    NMNM, 
    Please give us an answer on this as the link provided is absolutely useless.
    Thank you.

  • Appending a csv column exported from Active Directory

    Hi Guys
    We have a new access control system. The DB of the control system needs to be updated with new people from Active Directory. It has an import tool to this. I want to automate it to do it every hour. So I started writing a powershell script to export any
    users that have changed in the last day. Here is what I have so far:
    Get-ADUser -Filter * -Properties * | Where {$_.Modified -ge $(Get-Date).AddDays(-1)} | select rcscardcode | Export-Csv -path C:\Users\johncolfer\Desktop\TempStuff\Active-dir\export12.csv
    So as you can see I have selected a property "rcscardcode". It is a custom attribute in AD. An example of 1 of these numbers in the exported csv file is "1141410511000000" I need to be able to change this number to "1141410511"
    and all subsequent numbers in that column of the csv file. Is this possible? 
    Any help would be great.
    Thanks
    John

    Still no joy:
    I changed a property for a test account in AD which is a standard attribute. So I changed the "company" attribute to "987654321000000" in attribute editor. I then ran the following
    Get-ADUser-Identitygoofy-Properties*|select 
    company|%{
    $_.company=$_.company.Substring(0,10)
    } |Export-Csv-pathC:\Users\johncolfer\Desktop\TempStuff\Active-dir\export1342.csv-NoType
    It ran ok, but there was nothing in the exported CSV. I was hoping to see 1 column with a value of "987654321"

  • How do I get info from Active Directory and use it in my web-applications?

    I borrowed a nice piece of code for JNDI hits against Active Directory from this website: http://www.sbfsbo.com/mike/JndiTutorial/
    I have altered it and am trying to use it to retrieve info from our Active Directory Server.
    I altered it to point to my domain, and I want to retrieve a person's full name(CN), e-mail address and their work location.
    I've looked at lots of examples, I've tried lots of things, but I'm really missing something. I'm new to Java, new to JNDI, new to LDAP, new to AD and new to Tomcat. Any help would be so appreciated.
    Thanks,
    To show you the code, and the error message, I've changed the actual names I used for connection.
    What am I not coding right? I get an error message like this:
    javax.naming.NameNotFoundException[LDAP error code 32 - 0000208D: nameErr DSID:03101c9 problem 2001 (no Object), data 0,best match of DC=mycomp, DC=isd, remaining name dc=mycomp, dc=isd
    [code]
    import java.util.Hashtable;
    import java.util.Enumeration;
    import javax.naming.*;
    import javax.naming.directory.*;
    public class JNDISearch2 {
    // initial context implementation
    public static String INITCTX = "com.sun.jndi.ldap.LdapCtxFactory";
    public static String MY_HOST = "ldap://99.999.9.9:389/dc=mycomp,dc=isd";
    public static String MGR_DN = "CN=connectionID,OU=CO,dc=mycomp,dc=isd";
    public static String MGR_PW = "connectionPassword";
    public static String MY_SEARCHBASE = "dc=mycomp,dc=isd";
    public static String MY_FILTER =
    "(&(objectClass=user)(sAMAccountName=usersignonname))";
    // Specify which attributes we are looking for
    public static String MY_ATTRS[] =
    { "cn", "telephoneNumber", "postalAddress", "mail" };
    public static void main(String args[]) {
    try { //----------------------------------------------------------        
    // Binding
    // Hashtable for environmental information
    Hashtable env = new Hashtable();
    // Specify which class to use for our JNDI Provider
    env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
    // Specify the host and port to use for directory service
    env.put(Context.PROVIDER_URL, MY_HOST);
    // Security Information
    env.put(Context.SECURITY_AUTHENTICATION, "simple");
    env.put(Context.SECURITY_PRINCIPAL, MGR_DN);
    env.put(Context.SECURITY_CREDENTIALS, MGR_PW);
    // Get a reference toa directory context
    DirContext ctx = new InitialDirContext(env);
    // Begin search
    // Specify the scope of the search
    SearchControls constraints = new SearchControls();
    constraints.setSearchScope(SearchControls.SUBTREE_SCOPE);
    // Perform the actual search
    // We give it a searchbase, a filter and the constraints
    // containing the scope of the search
    NamingEnumeration results = ctx.search(MY_SEARCHBASE, MY_FILTER, constraints);
    // Now step through the search results
    while (results != null && results.hasMore()) {
    SearchResult sr = (SearchResult) results.next();
    String dn = sr.getName() + ", " + MY_SEARCHBASE;
    System.out.println("Distinguished Name is " + dn);
    // Code for displaying attribute list
    Attributes ar = ctx.getAttributes(dn, MY_ATTRS);
    if (ar == null)
    // Has no attributes
    System.out.println("Entry " + dn);
    System.out.println(" has none of the specified attributes\n");
    else // Has some attributes
    // Determine the attributes in this record.
    for (int i = 0; i < MY_ATTRS.length; i++) {
    Attribute attr = ar.get(MY_ATTRS);
    if (attr != null) {
    System.out.println(MY_ATTRS[i] + ":");
    // Gather all values for the specified attribute.
    for (Enumeration vals = attr.getAll(); vals.hasMoreElements();) {
    System.out.println("\t" + vals.nextElement());
    // System.out.println ("\n");
    // End search
    } // end try
    catch (Exception e) {
    e.printStackTrace();
    System.exit(1);
    My JNDIRealm in Tomcat which actually does the initial authentication looks like this:(again, for security purposes, I've changed the access names and passwords, etc.)
    <Realm className="org.apache.catalina.realm.JNDIRealm" debug="99"
    connectionURL="ldap://99.999.9.9:389"
    connectionName="CN=connectionId,OU=CO,dc=mycomp,dc=isd"
    connectionPassword="connectionPassword"
    referrals="follow"
    userBase="dc=mycomp,dc=isd"
    userSearch="(&(sAMAccountName={0})(objectClass=user))"
    userSubtree="true"
    roleBase="dc=mycomp, dc=isd"
    roleSearch="(uniqueMember={0})"
    rolename="cn"
    />
    I'd be so grateful for any help.
    Any suggestions about using the data from Active directory in web-application.
    Thanks.
    R.Vaughn

    By this time you probably have already solved this, but I think the problem is that the Search Base is relative to the attachment point specified with the PROVIDER_URL. Since you already specified "DC=mycomp,DC=isd" in that location, you merely want to set the search base to "". The error message is trying to tell you that it could only find half of the "DC=mycomp, DC=isd, DC=mycomp, DC=isd" that you specified for the search base.
    Hope that helps someone.
    Ken Gartner
    Quadrasis, Inc (We Unify Security, www -dot- quadrasis -dot- com)

  • Delete emails from server when removed from phone inbox

    I want my server (Verizon Yahoo) to trash and delete messages when I trash or delete them on my 5s. I have gone into my Verizon account on the phone, made sure Trash was selected rather than Archive, selected "Delete from server..."when removed from inbox"", restarted, etc. Everything else works in the account, and when I delete on the server, it is deleted on the phone. I want emails to delete from the server when I remove them from the phone's inbox. Supposed to happen, but doesn't.

    Thanks for the reply. I wasn't very clear, I guess. What I want to do is Trash or Trash>Delete emails on my iPhone 5s and have them go away from the inbox on my Verizon/Yahoo server. That does not happen now, even though I have set the setting on my phone to do so. All the stuff in my inbox on the server reappears the next time my phone inquires, including the emails I've sent to Trash (on the phone) and those I've Trash>Deleted there. Not too worried about permanent, real, NSA-type deletion, because that just isn't going to happen - I am worried about the poor agent at NSA who has to read my boring, mundane emails, though. I just don't want to see stuff I've Deleted from my phone's inbox come back to the inbox. Zombiemail!

  • How to set in Windows 8.1 the Account Picture from Active Directory

    Hello All,
    In my company I have uploaded the photos for
    each employees in
    Active Directory using a powershell script that set the attribute
    thumbnailphoto.
    This is useful for images in Lync and Outlook,
    now I want to use these pictures
    to sync with the account picture
    in Windows 8.1 but I haven't found anything in internet that helps me
    for this.
    I hope someone can help me,
    Thanks!

    Hi,
    You can try the steps in following article:
    Using Pictures from Active Directory
    http://msitpros.com/?p=1036
    This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
    Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
    completely understand the risk before retrieving any software from the Internet.
    For your reference, here is the similar thread with different method:
    http://social.technet.microsoft.com/Forums/en-US/d6e7b2c3-c343-4900-a01d-24bfb30357b6/is-there-a-solution-to-set-user-account-picture-from-active-directory-thumbnailphoto-attribute-in?forum=w8itproinstall
    Hope these would be helpful.
    Kate Li
    TechNet Community Support

  • How to create an embedded link with VBScript that references user website from Active Directory?

    I have scoured the web for days and have not been able to quite come up with exactly what I need for this. I have created an Outlook signature deployment using VBScript which sets information in an already formatted Word doc using placeholders. (Ex. [Displayname],
    [Initial], [City])
    All of that works as expected, but now marketing would like to have an embedded link reference some of our users personal web pages. So the link would display some kind of standard text like "Click Here". Once clicked on the user would be redirected
    to the personal web page of the person who sent the email. My problem is, I have no idea how to get the hyperlink to pull in the information from Active Directory...another problem is I know only enough coding to be dangerous so I am stuck. 
    Here is a sample of what I am working with, I am hoping someone can point me in the right direction. Thanks!
    '----- Connect to AD and get user info -----'
    Set objSysInfo = CreateObject("ADSystemInfo")
    Set WshShell = CreateObject("WScript.Shell")
    strUser = objSysInfo.UserName
    Set objUser = GetObject("LDAP://" & strUser)
    strDisplayName = objUser.displayName
    strFirstname = objUser.FirstName
    strLastName = objUser.givenName
    strInitials = objUser.initials
    strName = objUser.FullName
    strTitle = objUser.Title
    strDescription = objUser.Description
    strOffice = objUser.physicalDeliveryOfficeName
    strCred = objUser.info
    strPOBox = objUser.postOfficeBox
    strStreet = objUser.StreetAddress
    strCity = objUser.l
    strPostCode = objUser.PostalCode
    strPhone = objUser.TelephoneNumber
    strMobile = objUser.Mobile
    strFax = objUser.FacsimileTelephoneNumber
    strEmail = objUser.mail
    strWeb = objuser.wWWHomePage
    '----- Apply any modifications to Active Directory fields -----
    'Use company info page if user does not have a Linked-In account specified
     if strweb = "" Then strweb = "http://www.linkedin.com/company/58654"
    '----- Open Word template in read-only mode {..Open(filename,conversion,readonly)} -----
    Set objWord = CreateObject("Word.Application")
    Set objDoc = objWord.Documents.Open(strTemplatePath & strTemplateName,,True)
    Set objEmailOptions = objWord.EmailOptions
    Set objSignatureObject = objEmailOptions.EmailSignature
    Set objSignatureEntries = objSignatureObject.EmailSignatureEntries
    '----- Replace template text placeholders with user specific info -----
    SearchAndRep "[DisplayName]", strDisplayName, objWord
    SearchAndRep "[Name]", strName, objWord
    SearchAndRep "[Description]", strDescription, objWord
    SearchAndRep "[Title]", strTitle, objWord
    SearchAndRep "[Street]", strStreet, objWord
    SearchAndRep "[POBox]", strPOBox, objword
    SearchAndRep "[City]", strCity, objWord
    SearchAndRep "[State]", strState, objWord
    SearchAndRep "[PostCode]", strPostCode, objWord
    SearchAndRep "[Phone]", strPhone, objWord
    SearchAndRep "[Mobile]", strMobile, objWord
    SearchAndRep "[Fax]", strFax, objWord
    SearchAndRep "[Email]", strEmail, objWord
    'SearchAndRep "[Web]", strWeb, objWord
    '----- Replace template hyperlink placeholders with user specific info -----
    'SearchAndRepHyperlink "[email]", strWeb, objDoc
    SearchAndRepHyperlink "[Web]", strWeb, objDoc
    '----- Set signature in Outlook -----
    Set objSelection = objDoc.Range()
    objSignatureEntries.Add "NewCBSig", objSelection
    objSignatureObject.NewMessageSignature = "NewCBSig"
    'see note below if a different reply signature is desired
    'objSignatureObject.ReplyMessageSignature = "Full Signature"
    '----- Close signature template document -----
    objDoc.Saved = TRUE
    objDoc.Close
    objWord.Quit

    Can you ask a specific question? You have posted a script and noted you need a link but there is no question.
    ¯\_(ツ)_/¯

Maybe you are looking for