Respect due to video editors

whoa this is a steep learning curve.
This is probably a dumb question but ... this is my first project. I drag a clip into the timeline - then another. When I hit play, the cursor stops at the join - won't play past it.
So - what am I doing wrong?
Thanks
ian

Your clip is probably still selected. Is it colored blue in the timeline? To play the whole movie (both clips) you need to deselect any individual clips. You can do this by clicking somewhere else in the iMovie window, or clicking the << button twice.

Similar Messages

  • IPod video fuzzy/blurry and juddrey when played back on video editors

    i have recorded many videos on my ipod before but the most recent videos have become fuzzy/blurry when i have uploaded them onto video editors i have tried many different editors but all of them made the video qulity poor, fuzy and juddery. when i play them back on my ipod or PC there absolutly fine but as soon as they are in a video editor the become fuzzy.

    (PAL would be less than 768x576 pixels)
    BUT...why do commercial DVDs (i.e. the ones I rent from Blockbuster) look ok on my laptop? Do they use better compression or something?
    A little "better compression" and a lot of "something".
    Yes, commercial DVDs are produced by better compressors, but the primary reason for better quality is better original content. Commercial DVDs aren't shot with consumer DV camcorders, while they are shot using a tripod and carefully lit.
    MPG-2 works by looking at image frame to image frame variations - things like camera shake and noise due to poor lighting can cause major frame to frame differences in the video stream causing MPG-2 artifacts.
    In addition, the commercial content is just a lot sharper to start with - better lenses, 3 chip cameras with more pixels than DV camcorders, as well as no compression of the shot footage (DV stream content is compressed about 4:1).
    It the old computer saying: GIGO
    Garbage In - Garbage Out
    Now I'm confused! If a monitor has more pixels shouldn't it give a better picture?
    Only if your source image has the same number of pixels. Your DVD only has (PAL) 768x576 pixels and if you 'blow them up' to something like 1280x1024 (or larger) on your computer monitor the image with 768x576 pixels will look very soft.

  • Premiere Elements 12 crashes during video editor launch

    I have tried installing this as a trial and as a licensed version, both from a DVD and from the desktop.  I get the following crash during startup of the video editor:
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: Adobe Premiere Elements.exe
      Application Version: 12.0.0.0
      Application Timestamp: 523cd4d5
      Fault Module Name: dvacore.dll
      Fault Module Version: 11.0.0.0
      Fault Module Timestamp: 523cc5bf
      Exception Code: c00000fd
      Exception Offset: 00000000000698b6
      OS Version: 6.1.7601.2.1.0.256.48
      Locale ID: 1033
      Additional Information 1: fac2
      Additional Information 2: fac2a5e0455ddc953003a7d6737e6f56
      Additional Information 3: 849e
      Additional Information 4: 849e9f8e49e92f5a6249cde48a76ced7
    I have done the following to try to fix this issue:
    Uninstalled and reinstalled Premiere Elements as noted above, along with deleting existing files.
    Uninstalled/reinstalled Quicktime.
    Updated all Windows Drivers.
    Updated Video and Sound drivers.
    Disk Cleanup
    Disk Defragmenter

    SDLeMire
    Have you made any attempt to contact Adobe via its Adobe Chat to try to resolve this issue? To do so, please click on the following link
    Contact Customer Care
    set for
    Premiere Elements
    Adobe ID and Signing In
    Adobe ID, sign in, and account help
    Chat Panel
    at this moment there is an active Chat Panel at the end of the path. If the web page set does not hold, then you will have to navigate to Chat Panel using the above titles as guides. Adobe Chat might offer you the opportunity for remote control of your computer for troubleshooting whereas we cannot at this user to user level. The above does not prohibit you from troubleshooting here as well.
    Please try the SLCache renaming as detailed in the following
    ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
    The error profile with dvacore.dll has been frequently seen in these forums for many versions of Premiere Elements.
    Fixes have included creating a new User Account with Administrative Privileges and installing and running Premiere Elements in it.
    In another instance the problem was reported to be due to share with a file server. And, so on.
    Please review the above and then we can decide what next.
    Thank you.
    ATR

  • Help please! imac is completely full, FPC wont let me render! I'm a video editor and have over 70 gb worth of videos on the imac which all need to be kept but now beloved imac is full, only had it for 5 months! need external hard drive every 5 months??

    FPC wont let me render! I'm a video editor and have over 70 gb worth of videos on the imac which all need to be kept for various clients/backup/original versons but now beloved imac is full, only had it for 5 months! Will Ineed external hard drive every 5 months?? This can't be I've already resorted to getting rid of unsed applications such as garage band, iTunes,address book ect. I've trashed everything I could. what next ???
    My video files are massive, converting them to a different format doesn't reduce the size of them it just turns them into mp4 or apple pro res ect
    This iMac is for work only so there's no pictures, no music, no conacts, no messenger, no games, nonothing but videos!!

    Have a look at this: http://grandperspectiv.sourceforge.net/
    It will show you exactly what is taking up all of your space.
    You also may want to consider some kind of external storage just for your video projects.

  • I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

    I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
    all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
    Rodney
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    [If you are posting using email, please turn your 'sig file' function OFF for posting]

    silkman1
    I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
    But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
    know if I am misinterpreting anything that you have written.
    You have a video created in Windows Movie Maker.
    How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
    Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
    From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
    Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
    But, the pan and zoom effect is not seen in playback of the export.
    Is all of the above correct so far?
    If so....we are going to need some more details from you...
    a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
    b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
    Position (for Pan) in the Motion Panel expanded?
    c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
    setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
    I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
    your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
    so that we are in sync to resolve the issue.
    Thanks.
    ATR

  • I currently have a mbp with two internal hard drives ( took super drive out) which for a video editor like myself is a dream I can edit video anywhere, my question can I order a new mbp with 2 internal flash drives?

    I currently have a mbp 2.3 gighuz intel core 7 16 gig of ram with two internal hard drives ( took super drive out) which for a video editor like myself is a dream I can edit video anywhere, my question can I order a new mbp with 2 internal flash drives?

    I wouldn't think so because the newer ones with Retina displays don't have an internal SuperDrive that can be replaced. Therefore the newer logic boards wouldn't have the two SATA/SATA Express connections on the logic board.
    At least that was the case as of 2012. I've seen newer ones and they also don't have a SuperDrive.

  • Premiere elements has encountered an error.  [..\..\Src\Core\Preferences.cpp-338] (while launching video editor)

    Getting an error while launching Video Editor (either New project or Existing project). However i can launch "Organizer" with no issue.
    windows 7 -64bit Core i7
    Premiere elements has encountered an error.  [..\..\Src\Core\Preferences.cpp-338]
    then
    -Runtime Error!  Program C:\Program Files|A...  This application has requested the Runtime to terminate it in an unusual way.  Please contact the applications suport team for more information.
    then
    -Adobe Premiere Elements 11 has stopped working  A problem caused the program to stop working correctly, please close the program.

    School Board
    Thanks for the replies.
    I was almost sure the uninstall, ccleaner, reinstall would resolve the problem. But, onward....
    Are you working from a school or company network or from an individual home computer?
    From your ID and some comments, I think school network.
    I suspect the issue is more than resetting the preferences, but let us give that a try to rule it out (or in).
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    11.0
    and in the 11.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then
    you delete the whole 11.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working
    with Folder Option Show Hidden Files, Folders, and Drives enabled so that you can see the complete path cited.
    Is the Owner designation in the above path named correctly?
    Also, look at disabling the SLCache Folder if you find one as described for 12 in the following
    ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
    To be continued....
    ATR

  • N8 Video editor.. out of sync audio

    Every time i try and join 2 or more videos taken with my N8 using the video editor, the audio gets out of sync after the first video.
    Has anyone else notice this?

    I'm really shocked that this issue hasn't been resolved with the Belle Update. They've made some good changes to the video editor, now allowing you to save a project before you're finished, etc. However, I can't understand how they haven't spotted and resolved this problem by now. Anyone from Nokia care to respond? This really does ruin an otherwise very promising piece of software! 

  • I'm a video editor working primarily in FCP7 and just purchased the latest Mac Pro running Yosemite ? Does anyone know if any options have become available for running FCP7 on this platform ?

    I'm a video editor working primarily in FCP7 and just purchased the latest Mac Pro running Yosemite ? Does anyone know if any options have become available for running FCP7 on this platform ?

    It would "run" (more like Sunday stroll or walk) if you installed Snow Leopard in a VM. Especially if you have 6-core (and would help to have 6 or 8 cores anyway if you were able to and intend to make best use of nMP for video editing).
    If you "classic" Mac Pro was 2009 or later, adding two AMD graphic cards, upgrading the processor to 8-core 3.xGHz would have gotten you a FCP-X capable machine and still dual boot and use Snow Leopard as needed.
    Any Mac Pro can now use 1000MB/sec SSD PCIe blade to boot from and/or for scratch and editing to help improve work flow.
    SSD Blade Drive for "Classic" Mac Pro

  • How do I access the Quicktime video editor in iMovie?

    I'm trying to access the Quicktime video editor (the one that allowed you to sharpen your videos, among other adjustments) that used to be there in iMovie. I'm running iMovie 10.0.5 on OS X Mavericks 10.9.5 and can't seem to find it.

    The latest incarnation of iMovie doesn't offer the 'Export with Quicktime'-options, the previous versions did.

  • Embed Video Editor doesnt work =(( N78

    Hi everyone, i have N78 and after updating to the latest software version I noticed that I cannot use video editor - I cant add musik to my videos and cant work with pictures as well like to crop, bright up etc.    Hwo knows wots is the problem? Is it because of updating?

    Hi,
    How did you write autoplay attribut ?
    Videos on Safari and iOS.
    Videos HTML 5 by google.

  • Why isn't there any complete video editor in the N...

    Hi!   Got a bit disappointed in my N86 when i discovered the very very poor "video editor", in which you can put in a sound, text either in the beginning or in the end, and stitch together videos.  I find this very poor compared to my N95 video editor, where i could decide to put the text and sound where the hell i wanted, and have different transitions between em'.
    So Nokia, where the **bleep** it my fully complete video editor!??!  **bleep**, it couldnt be to hard to put it in, could it?
    If you know why they decided to ignore a video editor on a 8MP camera phone, that worked fine on a few years old cell, please tell me! 

    The N86 seems to be the only current Nokia which has the video editor. It's been a rarity since the N95 8GB. Presumably it's in for a wholesale re-write or something.
    Help I'm trapped in a sig factory.

  • Restore photo editor and video editor

    Can someone really help regain my photo and video editor on my nokia 700 after i have performed factory reset, my nfc tutorial, photo editor as well as video editor have vanished after using the back up.I love using thee apps on my phone, please i really need this help.

    have you tried reinstallnig the current firmware thru Nokia Suite on PC? also check that those editors haven't moved into the Gallery section of your device.

  • Photo editor and video editor

    Please suggest me a very good video editor and a photo editor (although inbuilt photo editing is there but still if there is any better) for my nokia 808 pureview white and from where i can download these and install in my mobile.
    Thanking you,
    Pbhowmik

    your best bet apart from Google would be searching under photo or video or editor in Nokia Store on your device. As Symbian is now in maintenance mode, developer support and application support appears to be winding down, so what is found or not found, is unfortunately as good as you're going to get mate.

  • Photo Editor & Video Editor

    After Symbian Belle Future Pack 2 Update, photo editor & Video Editor is deleted. In Ovi Store I don't found any of the editor. Where I can found original Video Editor & Photo Editor which was in feature pack 1 or Original Symbian Belle ? Please Help , I need both of them
    Send From My Nokia 700
    Solved!
    Go to Solution.

    Read my reply here http://discussions.nokia.com/t5/Pictures-and-Videos/nokia-700/m-p/1664380

Maybe you are looking for