Respect user preferences when doing an upgrade

If on a Install I had unchecked click-to-call, Set bing as home page and search engine. on the windows desktop client upgrader, the next upgrade wizard prompt should remember that and keep it unchecked. How hard is it to respect user preferences?

You are not supposed to lose the double-the-data promotion as long as you maintain a 4G phone on the line. If for some reason it drops off when you activate the new phone, call Customer Service and have them reinstate it (you'll have a 14-day window from the time it drops off for them to reinstate it, otherwise it's lost forever). Buying phones at places other than Corporate Verizon stores or VZW on-line, such as third-party retailers, can be tricky when maintaining these type promotions. If you are paying full retail price for the phone and then activating it yourself on-line, you probably won't have an issue. But if you get a subsidized phone and activate it at the third-party retailer, they may not be able to maintain your double-the-data promotion due to their system ... then you'd need to contact Customer Service and get them to reinstate it.

Similar Messages

I bought the iPhone 4 user and when you are upgrading to the new system ios7 I have a problem activation lock note that I do not know what is the ID Apple and The password because the phone used?

I bought the iPhone 4 user and when you are upgrading to the new system ios7 I have a problem activation lock note that I do not know what is the ID Apple and The password because the phone used?
please help my what can i do?
IMEI : 012658006380001

Welcome to the Apple community Kobra.
Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

When doing a upgrade download, the download ask me to close elementsAutoAnalyzer, I cannot find it

when doing an upgrade download, the download manager ask to close elementsautoanalyzer. I do not have or can't find this application. please advise

Closing Programs Interfering with Installation
PC - Task Manager: (CTRL-ALT-Delete) http://support.microsoft.com/kb/323527
Mac - Activity Monitor: http://osxdaily.com/2010/08/15/mac-task-manager/

TS3694 Ipad locked up when doing iOS upgrade . Screen shows iTunes logo and connector . Any suggestions on how to reboot/ restart

iPad locks up when doing iOS upgrade. Screen shows iTunes icon and connector. System will not power up or restart. Any ideas?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

Programmatically changing user preferences when creating an InfoView user in code

Post Author: rickp101
CA Forum: .NET
I am very new to BO (using Business Objects 11.5) so bear with me if I am not clear or seem to have no idea what I'm talking about.
As a .NET Developer I have been asked to work on a project that involves creating new BO users and logging them in from an ASP.NET application (in order to mimic a single sign in system from another piece of software). I have found most of the information I require for this in the .NET SDK. However there is one function the client would like that I have not been able to find a solution for, and that is to change the users document viewing preferences.
Within InfoView, if you go into user preferences, under the General tab there is the following option:
For each document, show me ...
descriptionownerdateinstance countactions and description (if selected) initially not hidden
I think by default all of the boxes are checked however the client only wants the description showing for each user when they are set up. Is this something that can be modified within the code when the user is created or is each user going to have to change this themselves manually once logged in?
Any help will be much appreciated.
Richard

Post Author: Ted Ueda
CA Forum: .NET
The InfoView settings aren't documented, unfortunately, but with sufficient trial-and-error, you'd be able to determine the correct values.
The settings are stored in the SI_DATA property 'desktopsettings' for a User object - you can have a look by logging onto 'Query Builder', accessible from the admin launchpad, and entering a query of the form: "Select SI_ID, SI_NAME, SI_DATA From CI_SYSTEMOBJECTS Where SI_KIND='User' And SI_NAME='<username here>'".
You'd see that, if you've specified the properties manually in InfoView (the property is not there by default) that it consists of '&'-separated key=value entries.
You'd retrieve the value via Enterprise .NET SDK call User.GetProfileString("desktopsettings"), and set new values via User.SetProfileString("desktopsettings", <new string value here>).
The specific values you're interested in are booleans dv0=1, dv1=1, dv2=1, dv3=1, and dv4=1.
Sincerely,
Ted Ueda

Can't change user preferences when Acting As a user

I've configured the 'Act As' functionality so as an administrator (Proxy User) I can log in as another user. However when I attempt to change any of target user's preferences I get the following message :-
"Exception occurred when saving user preferences to the catalog access denied for user to path /users/[email protected]/_prefs/userprefsxmlstore"
Proxy Level is set at full for all users.
I've tried changing the permissions on the users folders via the Catalog manager but doesn't seem to make any difference.
Any help would be great!
Edited by: 876718 on 28-May-2012 03:56

Hi All,
You can check this topic on suppot.oracle.com
https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?id=1474923.1&type=DOCUMENT&displayIndex=1&returnToSrId=&srnum=&org.apache.myfaces.trinidadinternal.webapp.AdfacesFilterImpl.IS_RETURNING=true&_adf.ctrl-state=sixc8by79_9

Why do we change the user group when doing LSMW?

Hi experts,
I just wanted to know why do we change the user group Tcode SU3 when we are doing upload of data using LSMW?
Thanks,
JEss.

As Rajesh suggested if you are uploading data for action in which infotype group is based on User Group then you need to change User group.
Otherwise there is no need to change user group for using LSMW.
Rgds,
Lata

When does Plus upgrade start?

Last night I finally clicked to upgrade my purchased junk to iTunes Plus. They said they'd drop me an email with instructions on how to download them. 16 hours later, no email yet. It's Apple, it's iTunes, so I don't think I've been scammed, but what is the deal here? When am I going to be able to start downloading the stuff I paid for? I can't find any information on the process in the help section and there doesn't seem to be anything about this in the forum archives. Do I need to call my bank and change all of my accounts or will this eventually happen?

Look under the Store menu in iTunes for the "Check for available downloads" command and run that. You may find the tracks there to be downloaded.
If not, contact the iTunes Store using the form linked from their Download support web page and explain the problem to them.
Good luck.

Backup locks up when doing version upgrade

I am trying to upgrade to ver. 5.01 but itunes locks up just barely into the backup prior to the updates. Does anyone know how to fix this?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

Maintaining user profiles when upgrading from v24 to newest version 36.X - Enterprise

Hi,
Im going to upgrade the Mozilla Firefox for about 500 users ish. The current version is 24.0 and we are upgrading to the newest version 36.0 something.
But the question is, how do I maintain all of the user settings when doing this upgrade? It is not an option to upgrade using the application itself. We have a centralized Config Mgr 2012 R2 solution. And I need to keep all of the user profiles with bookmarks, saved passwords, etc etc as it is today. The current version they are using have a few restrictions made with predefined and locked prefs in forms of automatic update, homepage, disabling the send data to Mozilla and so on, basically all of the standard enterprise configuration when you want to controll how the browser is for the users.
I've read a few articles on where to find spesific files, and what they are containting of information for the profile. But when doing a uninstall of the current version mozilla also removes whatever is stored in %appdata%\mozilla firefox\...profiles..
Is it even possible to "transfer" profiles for Version 24 to the newest version 36.something? Also, this needs automation, its not an option to manually restore each profile from "backup" for about 500 users. All profiles are unique.
Client computers are running Win 7 - 64bit OS.
Best Regards

To answer your question, when you update from 24 to 37 (the actual latest version) your profiles will migrate automatically, there should be no action needed on your part. We try to minimize profile breaking changes, so between versions 24 and 37 there is no need to do any special migration (that is only really a need when going from Firefox 3.6 or older to the latest version).
HOWEVER, since you are an enterprise and it looks like you only do upgrades every so often, I'd suggest you look into Firefox for Enterprises. https://www.mozilla.org/en-US/firefox/organizations/
This version only updates major versions once a year (so from Firefox 10 to 17, from 17 to 24, from 24 to 31, from 31 to 38) but it comes out with regular security updates every 6 weeks. This way you don't have to continually re-certify Firefox major versions every 6 weeks, and can simply let automatic updates push out security updates to your users every 6 weeks (With your current model your users are vulnerable to all security holes found until you push the next major update). Then, next year, you have a 12 week overlap between versions to test and make sure nothing breaks before you push to the next major version.
There is also a mailing list for you to get help and advice with specific Enterprise issues.
If you decide to go this route (which I would strongly advise) then I'd suggest you wait for a couple of weeks until Firefox 38 comes out, the next ESR version. Then you can certify and not have to worry about deployments until 45 next year!

Automating User Preferences in Workspace and WebAnalysis

In WebAnalysis I see there is a way to load an XML file with some of the user preferences, however does something exist for Workspace? Can be java or an xml solution.
Thanks

In WebAnalysis I see there is a way to load an XML file with some of the user preferences, however does something exist for Workspace? Can be java or an xml solution.
Thanks

Why does InDesign CS6 forget my preferences when I re-start?

Why does InDesign CS6 forget my preferences when I re-start? Not every time, but often. It's very frustrating to have to re-enter all my prefs. Every once in a while I start up InDesign CS6 and the new document dialog shows page sizes in po (I always use inches) and the prefs all seem to revert to default.

Do you have a Windows PC and when shutting down, is Indesign still open? If so, this can result in a damaged preferences when still writing while Indesign is being terminated by the system.

HI, i'm having this error message [There was a problem downloading the software for the iphone "banster's iphone". An unknown error occurred (-23)] when im doing the upgrading to IOS 5. anybody know how to slove it? Thanks

HI, i'm having this error message [There was a problem downloading the software for the iphone "banster's iphone". An unknown error occurred (-23)] when im doing the upgrading to IOS 5. anybody know how to slove it? Thanks

Yep, me to exactly the same problem, the error message keeps telling me to check my internet connection or try later. Nothing wrong with my internet connection. Is it an apple server problem?

Good afternoon. My iphone 4s used in Amerke another user. When you upgrade requests id and password. I can not get it, what to do?

Good afternoon. My iphone 4s used in Amerke another user. When you upgrade requests id and password. I can not get it, what to do?

As the previous owner of the phone or set up your own id and passwords.
You should have perhaps thought about all of these things before buying the phone.

Where does WebMail store user preferences

I have enabled WebMail on my server. Each user that logs in is able to change its preference settings at WebMail, e.g. # of msgs. shown per page, etc..
This is okay, but when I delete a user, I guess that there is a config file left somewhere.
Has anybody an idea where WebMail stores the user preferences for each user and how to properly delete them when removing a user from the system ?

/var/db/squirrelmail/data/
See pdf doc: Properly Deleting OS X 10.4.x Server Mail Users, on following page...
http://osx.topicdesk.com/downloads/
-david

Respect user preferences when doing an upgrade

Similar Messages

Maybe you are looking for