Respectives G/L accounts not picking while making posting

HI
when i am making posting in FB60 and tick on calculate tax than it is not picking the respective G/L accounts , how to display the accounts because while posting it should automatically pick the accounts

Hi,
While we run MRP system automatically creates the PR.
By using the PR we will create a PO.
But our items are Spare Parts,hence it will be consumed directly.
For Non stockable items the G/L account we have maintained is 630250.
So if we do GR it should be assigned to G/L Account 630250.
But while we do GR its updated to different G/L Account 630255.
Here G/L Account 630255 is meant for Stockable items.
Regards
KK

Similar Messages

  • Customer document number not picked while making payment

    Hi  guys
    we have one vendor the same vendor as customer also. while we making payment to vendor customer document document number not picked,, the erro message comes.. " NO APPROPRIATE LINE ITEM IS CONTAINED IN THE DOCUMENT"
    But we already assigned the following:-
    1) In Vendor master data, Customer code has been given
    2) In  Documnet type KZ, we select vendor also.
    But still the customer document not picked while  making payment
    Pl Help me out.
    Regards
    K.Gururajan

    Hi,
    Check the following:
    1. The check box clearing with customer and clearing with vendor has been selected in both the masters in the payment transactions tab.
    2. Ensure the vendor is not locked up in any payment proposal in F110.
    Thanks
    Aravind

  • Commitment item not picking while MIRO posting for Service entry sheet

    Hi to all,
    We have activated Fund Management in middle of the year where there were purchase order completed to till MIGO. When we do MIRO now system unable to pick commitment item from FMDERIVE.
    We have created Commitment item as 50/3 combination ( No budget check ) and assigned to GR/IR clearing account.
    We also activated trace in FMDERIVE and checked MIRO  posting and found that derivation is working properly but while posting it is triggering error.
    Some one advise me as it affected daily activities.
    Thanks & Regards,
    Y.Kiran Babu

    Hi,
    For the purchase order completed and the related MIGO created before FM was implemented, you need to run FMCN and FMCT.
    I will explain to you in detail all the information related to the matter.
    First of all, it seems to be in your PO that does not have FM account assignment (funds center and commitment item) in account assignment TAB. In addition, the error occurs usually also because in your SES the FM account assignment is missing.
    For GR and IR documents FM always takes the major part of the FM account assignment from the PO.
    You can fill these account assignments by using the programs RFFMCHAN/RFFMCHAT.
    FMCN/FMCT must be run for the first document in the chain, which is the PO in case you don't have a PR assigned to this PO or an earmarked fund document. If you have PR's assigned to the PO's please run FMCN/FMCT for the PR first.
    When executing the FMCT transaction, ALL documents selected in one group must be tested and processed successfully TOGETHER. If any one document fails, the ENTIRE group is shown as in error.
    Therefore, first step is to ensure that the reference PO has a valid FM account assignment and is updated in FM. This should be done by FMCN/FMCT and subsequent posting with FMN4N (see reconstruction note 189761).
    The SES itself might not be changed by FMCT. Therefore you should fulfill the FM account assignments in SES manually or with a custom program.
    Please check also your table FM01X. As an alternative solution, you can enable one of these flags in table FM01X, depending on your business needs:
    FLG_PO_PROTECT if you want to always inherit the fm account assignment from the reference PO and therefore skip FMDERIVE
    FLG_FMDERIVE_FORCE if you always want to force a call to fmderive in all cases
    FLG_SES_OVERWRITE in services, if you wish to overwrite the account assignment from the SES with the derived values from FMDERIVE.
    You can find more information about it in text part of notes 1146677 and 923672.
    FMDERIVE is skipped for GR/IR lines and the Commitment item is inherited from the PO regardless of whether or not the GR/IR line is FM relevant. This is SAP standard behavior.
    If you want to force the Commitment item to be derived from the GL account for the GR/IR line, you can use the FLG_FMDERIVE_FORCE flag as described in note 923672.  This will allow FMDERIVE to be called for these lines.  Please be sure to fully test this to ensure that FM account assignments that you do not want to be overwritten are not incorrectly derived.
    Bear in mind that for PO´s that does not have account assignment you should run FMCN/FMCT + FMN4N. For this you would need to check the flags and which one is more related to your needs. With the appropriate flag marked in FM01X (active with X) you should be able to run the transactions without any issue.
    Based on note 189761, after doing all the previous suggestions and the issue does not appear anymore, I suggest you to run the following programs:
    1) FMN0 for this PO/GR to see if the actual values are correct in FM table FMIFIIT (FM actual line items).
    2) Run report RFFMRC04 (transaction FMAF). The reconstruction programs always update the totals records in Funds Management. Therefore, you do not normally need to reconstruct the totals records.  However, if you suspect there are data inconsistencies in the totals records, you can analyze and correct these using the report RFFMRC04 (transaction FMAF).
    If you correct the totals records, you must do this before you reconstruct the assigned values (see below).
    3) Run reconstruction for AVC
    You can also reconstruct the assigned values using the following tools:
        o  Report BPINDX03 (transaction FMBV) for former budgeting
        o  Report RFFMAVC_REINIT (transaction FMAVCREINIT) for the Budget
           Control System (BCS)
    Make sure that no other system activities (postings, budgeting) are carried out during a reconstruction (commitment/actual or assigned values).
    I believe that this resolve your inquiry.
    Best Regards,
    Vanessa.

  • Current Condition Record value of JVCS not picking while GR posting

    Dear All,
    Tax Procedure being used is TAXINN
    Scheduling Agreements are created before 01.06.2008.
    Condition Record with validity periods for JVCS (A/P CST NonDed-VAT) is as follows,
    01.04.2007 TO 31.05.2008 = 3%
    01.06.2008 TO 31.12.9999 = 2%
    If Goods Receipt is created with Posting Date after 01.06.2008, it is considering the old value i.e. 3%, whereas it should consider current valid value i.e. 2%.
    After posting GR, Inventory and Purchase G/L Accounts are getting posted with 3% value.
    Difference of 1% getting reverted back in those G/L Accounts after posting Invoice for the GR document.
    Can you guide me to let system consider Condition Record value 2% as per GR posting date and Validity Period of Condition Record.
    NOTE: For PO/SA created on/after 01.06.2008, it is considering current value i.e.2%.
    Thanks & Regards,
    Nilesh Mahajan

    hi ,
    system is considering the scheduling aggrement creation date for condition record.
    change the date.
    and run the scenario
    regards,
    sujit

  • HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

    Hi folks,
    i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
    Can any one help me in this regard??

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

  • J1IH GL Account not picking

    Hi Experts
    Dear All,
    I have to capture additional excise on Capital Good(RG23C) from T-code J1IH in Additional Excise.
    So when i enter amount in BED Amount = 300, AED Amount= 200, ECS Amount=50 SECess Amount= 30 and click on Determine GL system show
    VAT clearing 580 Cr
    AED Ac DR 100
    SECESS Ac DR 15
    BED Ac DR 150
    ECS Ac DR 25
    Its not tallied, one more account cenvet on hold account not picking and user want to take AED 200 (full amount not 50%)
    I checked
    Specify Excise Accounts per Excise Transaction
    Specify G/L Accounts per Excise Transaction
    If doing any changes its not taking any effect in J1IH
    Please give me the gave to solve my problem
    Regargs
    Mani.S

    HI
    I found myself solved one part
    User want AED 100%, (where as system showing 50%). This one no need to calc in cenvat on hold
    Cenvat Hold = BEDAEDECS+ SECss
    And BED= 50% amt, AED = 50%, ECS= 50% amt, SECss= 50%
    User want
    Cenvat Hold = BEDECS SECss
    And BED= 50% amt, AED = 100%, ECS= 50% amt, SECss= 50%
    For calc cenvat system have to ignore AED and AED value 100% from input amount.
    Please guide me how to make, Is It any SAP Notes. Please give me solution ASAP
    Regards
    Mani.S

  • Accounting exchange rate not picking while running result analysisKKA2

    Hi All,
    WHile running Result analysis with KKA2 the accounting exchange rate not picking correctly.
    When we run the KKA2 from may to sep it is taking may month as default rate and it is extending to june aug,sep instead of seperate exchange rates for each month.
    We compared all configurations for this RA key with existed RA key .All the setting are  one and the same.in OKG2,OKG3,OKG4,OKG5
    PLease help ...
    Regards,
    Mohan

    Hi srikanth,
    It is not daily exchange rate.
    Actually we copied PS LCR RA key to PS IAS.
    PS LCR is working fine and it is picking correctly for the respective months.
    Where as In PS IAS it is taking starting month and same continuing for other consecutive months.
    Regards,
    Mohan

  • G/L account not picking automatically for cost centre

    Hai
    When ever i create a P.O for a cost centre ,when i enter the cost centre, the system is not picking the G/L account automatically. Instead i need to enter the G/L account manually.Why it is behaing like this? what is the solution?
    I had checked all the setting as mentioned below
    1.OBYC->   Here maintained the  G/L account for the comibination of
    Valuation mod - Gereral Modi- Valuation class- debit g/l account - credit  g/l account
    2.OKB9 -> Maintained entries for  Co.code- Cost element - Cost center
    3.OME9- Account Modification is VBR
    4.OBY6- Checked the field status variant, posting period variant

    Hi,
    Once u have given account assignment category 'K', then system will pick automatically G/L account from the OBYC settings for the combination of Valuation modification code,  account modifier (VBR) & Valuation class.
    From the OME9 transcation, system will pick transcation key for the respective account assignment category.
    For the  account assignment category 'K', account modifier is 'VBR'.
    Here masterial master record (MMR) is optional. If you are giving MMR in the PO, system will pick valuation class from the MMR.
    If MMR is not giving, then system will pick valuation class from the transcation OMQW. Here you need to maintain valuation class aganist material group, which is u r giving in the PO. ( This is optional)
    In the OBYC transcation, for the transcation key  GBB you need to maintain G/L account for the combination Valuation modification code,  account modifier (VBR) & Valuation class.
    Also maintain one more entry in the transcation key  GBB,  maintain G/L account for the combination Valuation modification code,  account modifier (VBR) & Valuation class field is blank.
    Once you have given account assignment category 'K' in the PO, system will pick G/L for the combination Valuation modification code,  account modifier (VBR) & Valuation class. This is happening before giving the cost centre.
    If you are not maintaining MMR in the PO and not maintaining valuation class aganist material group in the transcation OMQW, the system will pick G/L account for the combination of Valuation modification code,  account modifier (VBR) & Valuation class field is blank.
    So in your case, check valuation class aganist material group in the transcation OMQW and maintain G/L in the OBYC for the respective combination. If valuation class is not maintained aganist material group in the transcation OMQW and maintain one more entry in the OBYC with the blank valuation calss field.
    Regards
    KRK

  • G/L account not picking automatically in  PO with account ***. cat. M

    Dear Gurus ,
    I am creating PO manually with account assignment category M in which Consumption posting indicator is blank , when i am trying to create PO GL account is not Picking automatically , if i am giving Stock G/L account manually and creating GR in MIGO  , accounting entry Posting as
    22000000
    Stock  -Raw Material
    KBS
    17001060
    Gr/Ir  -  Finish
    WRX
    with this accounting entries material is coming in sale order stock , as per my knowledge stock account should trigger with Tnn Key BSX.  but account entry is created with KBS.
    My requirement is  G/L should pick automatically in PO from BSX transaction key and  stock value should be hit to Stock G/L with Tnn Key BSX.
    Please guide me because this scenario is new for me.
    Thanks & Regards,
    Akshay

    Dear Sir ,
    for BSX I have check in OBYC there is already G/L account assign to valuation class.
    Valuation Modifire
    valuation class
    G/L account.
    001
    3000
    22000000
    but when i have add G/L in GBB VKA  , it is picking automatically G/L 
    but as per scenario Stock G/L should Post through BSX. which is not coming In PO.  Please guide..
    Thanks & Regards,
    Akshay

  • Price Difference Account being hit while making AP credit Memo

    Hello Experts,
    Price Difference Account is being hit while creating AP Credit Memo. I am creating an independent AP Credit Memo (i.e. without any base document). After posting A/P Credit Memo when I look at the Journal Entry it shows 99.43% of amount goes to Price Difference Account and the rest 0.57% goes to Stock account.
    Help required please.
    Thanks & Regards,
    Edited by: Shahzad Nazir on Jan 19, 2011 5:54 PM

    Hi Nazir,
    This entry may have resulted because once you created the GRPO say for item A, the stock would have been consumed in production. And once you created Invoice and after that when you created credit memo, the system could not find the stock so it posted the difference in price difference account. Please run inventory posting list of the items in grpo to check the same.
    Thanks,
    Joseph

  • Recon Account not updating while in MIRO

    Hi all..
    Im facing the problem: Recon account is not updating  while during the MIRO. even though Vendor account is get updated and i have checked in vendor master also the same account has been maintained.
    Thanks In advance
    Akhil

    Definitely wrong forum to ask for this topic.  Have you posted this in MM and FI forum?

  • Order type is not picking while converison Plnd to process order

    Dear Dudes,
    i have maintained production scheduling profile in all material masters in which order type is specified. while converting planned order to process order order type is not picking.
    thanks in advance.

    Robert,
    Since you are using same order type for both MTS & MTO, you can define this order type "PI01" in the MRP plant parameters using transaction OPPQ in the Conversion of Planned order section.
    I am not sure, why production scheduling profile is not working for you, hope you are using the Production scheduling profile configured using CORY transaction check this part alone.
    Regards,
    Prasobh

  • Documnets are not picking while posting tds challen

    Hi,
    I have one issue related to TDS
    When I have posted document it is having block for payment indicator R.This indicator is having for all documents but one document is not picking up while doing the j1inchl.
    Thanks
    RAVi

    I got answer

  • Price not picking while creating purchase order

    hi all,
    i have created a pricing procedure and assigned to the vedor, but while creating purchase order the material price is not picking up.if i use the standard one the price is picking up. can anyone explaing any setting iam missing.
    regards
    thyagarajan

    Hi
    In your pricing procedure
    For the condition type Automatic Gross price PB00, you have assigned am Access sequence.
    <b>Access sequence</b>: An access sequence is a search strategy by means of which the system searches for valid records in various condition tables. It consists of one or more accesses. The sequence of accesses controls the priority of the individual condition records among each other. Through the accesses, the system is told where to look first and where to look next for a valid condition record in each case.
    Once the pricing procedure triggers, System looks for the valid condition recorrd for the condition type PB00 as per the priority listed in Access sequence.
    Example: If purchase info record is the first priority and you maintained the Info record then system picks the price from Info record into PO.
    If no valid condition record found then it will trigger PBXX Manual Gross price condition in PO and ask to enter the price manually.This is called condition technique.
    So check whether you maintained the Condition record for PB00 or not?
    Regards
    Ramakrishna

  • Vendor account not picked in F110 payment run

    Hi Sap Experts,
    i have assigned two payment methods to vendor master X,Y,which i do payment run for X for currency USD all the documents are picked for payment and when i run another payment run same time for Y  for currency INR its not picking up in payment run even all the open item s are due,
    could help me to solve the issue
    Laxmi

    Hi,
    Delete the current proposal of the payment run. Enter parameters once again. In Free selection tab restrict the currency to INR field. Run the proposal once again. If it still does pick up line items, check the following things
    1. Parameters of the first payment run. Did you restrict the payment run only for the first payment method
    2. Also see the dates entered in parameter tab of both runs
    Regards,
    radha

Maybe you are looking for

  • Production order in WIP

    Dear All, Eg. the production order in WIP has PCNF status.  Is there any transaction code that can change the status of production order in WIP become hold?  This is to avoid any confirmation prod order transaction, until the status hold is changed b

  • Masking ability with validation of FI documents

    Hi, I have set up a pre-req in the FI document validation using a set.  My pre-req looks as follows: G/L IN ACCT600 My set is named ACCT600 and has a from and to value of 600000 to 699999.  Instead of using a set to code this range, is it possible to

  • What is the typical amount of time for an iPad to fully charge?

    I have a brand new iPad, third generation, WiFi/LTE, 64 GB.  It seems to take up to 6-7 hours to fully recharge.  I am concerend, only because I had a first generation iPad, and it would charge in 2 1/2 hours.  Is this normal? Thanks

  • I can't view or edit my photos after Update

    My photos are visible in the row of thumbnails along the bottom of the screen but the main editing field is black. I just recently ran Update, so is that the problem although it was working fine last night?

  • [SOLVED] need help with virtualbox install

    I'm a relative n00b to Arch, haging migrated from Ubuntu (pha!!). Arch rocks! However, my beloved virtualbox isnt playing ball! After many hours of getting arch up and running I now need some assitance please with VirtualBox PEUL. I've googled and se