Response for Async to Async scenario

Hi Experts,
Is it possible to get response for Async to Async scenario?
For example: Response for File to File sceanrio.
Regards
Sara

Thanks for the info.
For the webservice to JDBC scenario, I have to use two way Asynchronous business process. Is it possible?
Scenario : Webservice to JDBC -> Async Call
JDBC to Webservice -> Async Call
I have already done with two way Synchronous. Here I would like to know about only Async call. Please provide your suggestions
Regards
Sara
Edited by: Sara D on Dec 18, 2007 7:55 AM

Similar Messages

For File -- RFC-- File scenario want to remove sync/async bridge

For File -- RFC-- File scenario want to remove sync/async bridge
Can I work with File -- RFC-- File scenario without BPM
Regards

Hi-
Check this threads
RFC -> File without BPM
File - RFC - File without a BPM - Possible from SP 19.
File-To-RFC without using BPM

ASYNC to SYNC scenario using BPM.

hi,
i have a async to sync scenario. i have a File sender->PI(BPM)->ECC and the response from ECC->PI->SOAP.
Here in PI, i am using BPM. The ECC side is a Synchronous BAPI. The response is sent to the SOAP receiver.
in BPM, can someone tell me how many transformation steps do i need i.e mappings. and how many abstract interfaces, synchronous interfaces, outbound interfaces, inbound interfaces?
also how many send,receive and transformation steps.
and in the configuration part,
how many receiver determinations, interface determinations do we need.
rgds,
mithun

Hi,
File sender->PI(BPM)->ECC and the response from ECC->PI->SOAP
Service interfaces
-> SI_OB for file (Request)
->SI_IB for Soap(ASy Response)
->SI_ABstract(ASy Request)
->SI_Abstract (Asy Response)
->Si_REq_RES_ABS(Syn)
->SI_ABS(ASY BAPI REQ)
->SI_ABS(ASY BAPI RES)
mappings
one for request mapping(file Req to BAPREQ) and one for response mapping(BAPI REs to RESponse mSg).
operation mappings-2, one for Req MApping ANd One for Res ponse mapping.
IP
reciv->transformation(REq)->Send(SYN/ASYN)->transformation(RES)->Send
ID:
3 reciver deteminations
one for file to IP
IP to ECC and IP to SOAP
3 interface determinations
1 sender agrement
2 reciver sgrements
one for IP to ECC
and IP to SOAPregards,
ganesh

Async to Sync Scenario

Hi Experts,
I am doing async JDBC to sync webservice scenario.
I did create async interface for JDBC and sync interface for webservice.
my scenario is i just want to see the response from webservice in XI for trouble shoot, i dont need to send the response message to database.
can anyone tell me how can we do it without using BPM (async to sync bridge).
Kind Regards,
kiran

Hi
Please go through below steps now
I have added the comments with same in bold font
Data Types: JDBC_DT,File_DT
Message Types: JDBC_MT,File_MT
Message Interfaces:
JDBC_OUT_MI(outbound,async),This should be Sync given MT_File as respo
File_MI(inbound,async), Dont use this
WS_IN_MI(inbound,sync,input=WS_req,output=WS_resp)
WS_resp_MI(outbound,async,WS_resp), -----No need of this
Message Mappings:
JDBC_WS_req_MM
(JDBC_OUT(JDBC_MT)------->WS_IN_MI(WS_req) ).
*Here WS_IN_MM msg. mapping should be used insted of*
*WS_IN_MI i.e message interface*
*WS_File_Res_MM*
(WS_Res(Source -- Ws_res) ---> File_MT)
Interface Mapping: JDBC_WS_req_IM(source=JDBC_OUT_MI,target=WS_IN_MI)
In IM you need to use the above one only
Here you have two tabs as Request & Response, Request will be normal as
it is JDBC_MT to WS_Req with proper mapping
*In Response use File_MT <--- Ws_RES with appropriate mapping *
For ID configuration refer below sample scenario,
It is File1 to RFC to File2- Just in your scenario it is JDBC>WS--->File2
So refer and do necessary changes
From SP 19 on XI 3.0 and SP 10 on PI 7.0, a File - RFC - File ( Asynch - Synch ) scenario can be done without a BPM.
Steps:
Integration Repository
The Integration Repository will be similar to any Synchronous Scenario ( say HTTP - RFC ) . 1 Outbound Synch message Interface and 1 Inbound Synch Message Interface.
Integration Directory
This is where a few differences lie, so let me take some time.
1. The Receiver Determination , Interface Determination will be the same as in HTTP - RFC synch scenario. Create the Sender File Adapter, Receiver RFC Adapter and Receiver File Adapter.
2. Sender Agreement will be for the Sender File Adapter. Sender Agreement uses the Synch Outbound Message Interface.
3. Receiver Agreement will be for the Receiver RFC adapter. Receievr Agreement will use the RFC as thge Inbound Message Interface.
4. We need to add a few modules in the Sender File Adapter.
Go to the Modules Tab of the Sender File Adater, and add the following modules in the same sequence,
Number - ModuleName - Type - ModuleKey
code1- AF_Modules/RequestResponseBean - Local Enterprise Bean - 1
2- CallSapAdapter-Local Enterprise Bean - 2
3-AF_Modules/ResponseOnewayBean-3[/code]
Parameters
ModuleKey - ParameterName - ParameterValue
code1 - passThrough - true
3-receiverChannel - Receiver File Adapter Name
3-receiverService - Receiver Business Service/ System[/code]
With this configuration, you can now handle the requirement without a BPM
This feature been already blogged for JMS Adapters in these blogs ,
Sync/Async communication in JMS adapter without BPM (SP19)
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
Async/Sync Communication using JMS adapter without BPM (SP 19)
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
Dynamic Configuration is also possible,and this as well as many other options are discussed in the How To guide - "How To Realize a sync-async and async-sync
bridge within the Adapter Framework" available on the Service Market Place.
For info on the Modules used here, look into these links,
Request Response Bean
http://help.sap.com/saphelp_nw04/helpdata/en/45/20c210c20a0732e10000000a155369/content.htm
Response Oneway Bean
http://help.sap.com/saphelp_nw04/helpdata/en/45/20cc5dc2180733e10000000a155369/content.htm
Hope this info helps,
Thanks
Swarup

IDOC to Webservice to Email - Async to Sync Scenario

Dear Experts,
I have a scenario: IDOC to Webservice (Async to Sync)
The response from the webservice needs to be sent via email. So I have a Email channel added to the Business service (ECC).
I tried this with BPM, but it does not work complaining about multiple receivers in a sync receiver interface.
Anyone has done similar to the above?
1. Using BPM?
2. Without BPM?
Thank you.

Thank you for the reply. This is what I have:
Repository:
1. Async ABS Interface for webservice request message
2. Sync ABS interface with webservice request message and response message
3. Async ABS interface for the reposnse message
5. Async IB interface for hte email message
4. Message mapping between IDOC and webservice request message
5. Message mapping between webservice response message and email message
6. 2 Interface mappings with the above mapping objects
7. Integration Process BPM with Receive step (Async w/s req), Sync send step (w/s req and respp) and Async send step (w/s response)
Directory:
1. Receiver agreement with BPM as sender and Webservice as receiver with SOAP receiver channel
2. Receiver agreement with BPM as sender and ECC as receiver with email receiver adapter
3. Interface determination for request mapping
4. Interface detrmination for response mapping
5. Receiver determination with ECC as sender and BPM as receiver
6. Receiver determaination with BPM as sender and Webservice as receiver
7. Receiver determination with Webservice as sender and ECC as receiver
is the above sufficient and right?
Thank you.

Can you explain steps in the Async and Sync scenarios JDBC to RFC.

Hi,
Can you explain some basic steps in the Async and Sync scenarios for sending data from JDBC to RFC.
Like,
The data is picked up from the database table through JDBC adapter.
It is passed on to SAP by calling the RFC. RFC gets executed
successfully. The status is returned by the RFC. The status needs to be
updated back into the SQL database table.
Is this a sync case or async case.
What si the diffrences in the sync and async scenarios in the above JDBC to RFC scenarios.
Soorya

hi check the below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
JDBC Synchronous call using BPM
Data Types -
1) File Input
2) JDBC Req
3) JDBC Response
4) File Response of similar type of JDBC Response.. ( This you can avoid also..let it be for first time)
Message Types
4 for each data type
Message Interfaces
1) Async, Outbound, Interface, to receieve the file
2) Async, Inbound , Interface to send the file from XI
3) Async, Absract , Interface of type File message type to recieve the message in the BPM
4) Sync, Abstract Interface with Req message type as File Request, and Response Message type as a file Response
5) Sync , Inbound interface for JDBC with Input message type as a JDBC Request and Output Message type as a JDBC Response
Message Mapping:
1)Mapping between File Req to the JDBC req
2) JDBC Response to File Response
Interface mapping:
1) Sender Interface as a Sync,Abstract Interface created for the file type and target interface as Synchrnous JDBC interface.
Use corresponding mapping for Req and Resp..
note:reward points if solution found helpfull.....
regards
chandrakanth.k

Missing response message in Idoc - WS scenario

Hello
I 'm missing a response message in the follwing scenario:
Idoc-> XI -> Web service (SOAP)
A Matmas idoc is sent from R/3 to XI. In XI the Idoc is
mapped to a SOAP message and sent to a web service.
The Message Interface for the SOAP call is synchronous
and has a PushMaterialSoapOut and a PushMaterialSoapIn
messsage, which is defined in the WSDL from the
web service and imported into XI Repository.
Everything is working fine but I do not get the response
message. The web service has sent the response message. I
have traced the firewall logs and i have seen the
response.
What is wrong? Is it basically possible to have a
scenario like this?
The message must have arrived somewhere, since the web
server does not throw an exception. But where is it?
Thank you in advance
Thomas

Hello Stefan
>Scenarios with IDOCs are always async. Therefore you
>cannot have a response.
Ok, so I have to use BPM.
>How do you want to process the response? What should
>happen in the sender system?
I was thinking about an ALEAUD idoc which is sent back
to R/3. Therefor I have created an synchronous message
interface with the MATMAS idoc as outgoing message and an
ALEAUD as incoming message. Accordingly I have a message
mapping for the response message.
An other reaction to the response message could be to set
the message to status failed. But this is the next issue.
>In some scenarios you might use a BAPI instead of an
>IDOC for synchronous message processing, but this
>depends of many circumstance depending ofyour business
>requirement.
The process in SAP R/3 is fixed. To move to BAPI is not
an option.
Regards
Thomas

Async-Sync-Async Bridge Without BPM

HI Folks,
I have a requirement as
u201CAn Asynchronous SOAP request is triggered to PI and then should get records from a (JDBC)database and write the result to a fileu201D
It is of Aync-Sync-Async Bridge and i have to do without BPM
I know by using some module parameters at sender communication channel we can do this.
But my query
1)Is that for SOAP sender communication channel can we provide the same module parameters
Number - ModuleName - Type - ModuleKey
1- AF_Modules/RequestResponseBean - Local Enterprise Bean - 1
2- CallSapAdapter-Local Enterprise Bean - 2
3-AF_Modules/ResponseOnewayBean-3
Parameters
ModuleKey - ParameterName - ParameterValue
1 - passThrough - true
3-receiverChannel - Receiver File Adapter Name
3-receiverService - Receiver Business Service/ System
2) Does the SOAP support the without BPM scenarios
3)Scenario is like Soap --> JDBC -->File (Async - Sync - Async) and how abt for Soap --> RFC -->File (Async - Sync - Async)
Thanks in Advance
Lemon

For your requirement , you can handle this scenario without BPM in two ways.
1) Async sync bridge without BPM. You are going to use request response bean and one way response bean module to achieve this. very simple. See this [link|http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File(Without%20BPM)]
In the sender SOAP channel you have to configure first request response bean, second callsapadapter and third onewayresponse bean. Refer this link. Simply follow file sender configuration for your soap sender or RFC sender.
Note: one receiver agreement , one receiver determination, one interface determination. only two receiver channels one jdbc and one file.
2) You can create SOAP to File asynchronous. Using quality of service EO and creating service interface asynchronous mode. In the mapping area do JDBC lookup. If your version is 7.1 then this lookup is available. This is pretty simple no need to do async to sync pattern.
Hope that helps.

Regarding Background Job scheduling for file to file scenario

Hi Guru's
Good morining all of u
I have one doubt on ...
can we do background job scheduling for file to file scenario?
Please give me response as early as possible.
thanks and regards
sai

background jobscheduling for file adapter...
you can schedule the file adapter according to your requirement as follows:
In the Communication Channel Monitoring Locate the link Availability Time Planning, In Availability Time Planning, choose the Availability time as daily and say create, give the time details, select the communication channel in your case file adapter , goto the Communication Channels tab and filter and add the respective channel, save it
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-

How to restrict bidders must response for all items?

hi experts
   we used SRM7.0 with Standalone Scenario.
   we need to restrict the bidder response for all items. in RFx items tab page, there is a checkbox 'RFX response Required for All items'. but it is doesn't work for this purpose. If the bidder reponse without price, they get warning message "Line 0001: '0' in the price field means that you are offering the item for free " . [there should be no free goods]
   how to solve it?    thanks in advance.
regards
    claud

Hi,
In RFx, in Item tab, you have an indicator "RFx Response required for all the items", but unfortunately it does not work! I don't know why?
One way to make it is, to do validation using BBP_DOC_CHECK_BADI. Other way is to create subline items under outline and check the "lot" indicator for the outlne. For this, you must have assigned HIER_SRM to the process type of RFx and RFx Response. Also refer to note 1267549 while making this assignment. Then if the bidder quotes for one item, then he/she has to quote for all items.
If you wanted to allow bidder to quote there own quantity check "Bidder can Change Quantities" in item tabl of RFx. Then the bidder gets separate columns as Required Quantity and Submitted Quantity. However note that, the system will not generate any message if the bidder quotes more than the required quantity. If you wanted to so, you need to validate the entry using the same BAdI.
Hope this has answered your question.
Ganapathi

PO 7.4: NW BPM: HTTP Error response for SOAP request or invalid content-type.HTTP 200 OK

Hi Experts
I am trying to call NW BPM scenario(File to BPM) from PI, and using below adapter config.
I am getting below error.
Failed to call the endpoint: Error in call over HTTP: HTTP 200 OK
SOAP: Call failed: java.io.IOException: HTTP Error response for SOAP request or invalid content-type.; HTTP 200 OK
SOAP: Error occurred: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: HTTP Error response for SOAP request or invalid content-type.; HTTP 200 OK
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: HTTP Error response for SOAP request or invalid content-type.; HTTP 200 OK
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: HTTP Error response for SOAP request or invalid content-type.; HTTP 200 OK
Any idea how to fix this issue?
Thanks,
Sandeep Maurya.

Hi Sandeep,
Test the URL from your browser and check the proxy settings as well.
Refer the below links
SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT
SOAP: Call failed: java.io.IOException: Failed to get the input stream from socket: java.net.SocketException: Connection…
Regards
Bhargava Krishna

Need steps required for http to webservice scenario

Hi All
I need the IR and ID steps for my below scenario.
Request will come as HTTP request from a web site and web service will get the request and same time it will send the response back to HTTP.basically this will be synch process.Need help urgently.
Girish

Hi,
The following are needed for idoc to file scenario...
In R3...
RFC dest to XI (sm59)
Logical system (bd54)
Port to XI (we21)
Partner profile for the logical system (we20)
In XI...
RFC dest to R3 (sm59)
Port to R3 (idx1)
create metadata for the idoc (idx2)
In sld...
create business system for R3.
Regards,
Uma

Item availability in background for make to order scenario

hi to all
i have a requierment for our project ,out client process is make-to order . once Sales creates the sales order this order will go for process order converted into production order.onec the goods produced against this sales order by doing MIGO the stock is posted to the unrestricted storage loaction.This is about the process.
My requirement is as an when the material is posted to storage location i have to do item availability manualy in the sales order.This will be done with checking with stock over view MMBE. But the client requirement is that process of confirming the item availability in the back ground .That is as an when the stock is produced against this sales order the item availability (schedule line ) should be confirmed in the back ground.
I need your valuable sloution to this scenario. My requirement is very critical as this requirement has come after golive. I have to do this at the earliest.
Looking for the reply
Regards
madhu

Hi All
Since no response for this requirement, I am closing this issue
Regards
Madhu

What is the fi responsibility for new implementation project

hai. gurus
please give me complete suggestion about fi responsibility for fi module in new implementation
bye
pooja

Hi
If you will see the phases of implementation in a SAp project like
Project preparetion
BBP(Business Blue print)
Realisation(Base level configuartion,unit testing,iNtegration testing)
Go live and support.
During BBP stage you have to study the existing process of the client and suggest how it will be mapped in SAP.And the process which can not be mapped in SAP will be treated as GAP and may be solved through out side software or through ABAP development.
Finalisining the Enterprise structure.The mapping of the org stru in legacy to SAP to be done here.Since for company thwo important statement are prepared at the yearend like B& S & p&l.These two statments can not prepared unless company code is mapped and assigned to other logistic structure.
Integration testing is another important milestone in an implementation. In this stage you have to see that the FI T code is not only working stand alone but it also works in an integrated scenario.
These are some of the scenario, where you have to contribute as a FICO consultant. Since the data flows from other modules of SAP to FI module , you should take care for that
cjheers
surendra

Please restore e-mail or at least give us some real information. Tech support is almost smug in their response for additional information. The iCloud status page has said the same thing since yesterday. A real dis-service. My business depends on this!

Please restore e-mail or at least give us some real information. Tech support is almost smug in their response for additional information. The iCloud status page has said the same thing since yesterday. A real dis-service. My business depends on this! Any one have any suggestions not being offerd by tech support or Apple? Anything at all?

mdjb wrote:
I just lost a big opportunity to get a new client because of this!! almost 24 hours now without any email service. I was one of the original.mac customers. I am over this time to move on. It is an inferior product.
My sympathy, but, this is what you agreed to when you chose to use a free system: (From terms of service agreement, iCloud)
APPLE DOES NOT GUARANTEE, REPRESENT, OR WARRANT THAT YOUR USE OF THE SERVICE WILL BE UNINTERRUPTED OR ERROR-FREE, AND YOU AGREE THAT FROM TIME TO TIME APPLE MAY REMOVE THE SERVICE FOR INDEFINITE PERIODS OF TIME, OR CANCEL THE SERVICE IN ACCORDANCE WITH THE TERMS OF THIS AGREEMENT.
And this is no different from any other free service I'm afraid. Pay for your mail, then you have the right to expect service.

Response for Async to Async scenario

Similar Messages

Maybe you are looking for