Response from RFC as Outbuund interface for other system

I have scenario RFC -> XI -> RFC
Is it possbile to get Response from receiver rfc, perform mapping and send to other system without BPM?

Hi Denis
Certainly. You can do that without BPM.
Please take help from the following links. (are for RFC->XI->SOAP scenarios, but you may well replace the receiver system (SOAP) with RFC.)
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
Feel free to get back for more clarifications.
-Cheers, Gaurav

Similar Messages

Not getting Response from RFC

Hi,
I am doing RFC to File. I could generate the FILE successfully. But I am not getting Response from RFC. I am getting empty payload. I am doing with out BPM. I did succesfully File-RFC-File. but here RFC is the sender. I have some doubts in defining Interface mapping and Message Mapping. Is this a Syscronous scenario by default ?
If I want to get the resonse of RFC to a file. How many Receivers and Senders do i need to create?
Regards,
Varun
Edited by: Varun on Sep 9, 2008 1:00 PM

hi,
Map Rfc.response to the File; hence rfc sender adapter and file receiver adapter..one sender n 1 receiver.Remember:
1. In the report that makes the call to XI , make sure that you use call RFC in a background task.
2. Make sure you use Commit Work at the end of the report.
Follow:
Send RFC to SAP XI Asynchronous
Also pls visit
Re: RFC to FILE
for the same scenario.
Thanks,
Durga
Edited by: NagaDurga Nannapaneni on Sep 9, 2008 10:55 AM

Howto make created folders/ files from one teacher, read only for other teachers?

Hello there,
as an admin @ school I was wondering how to make created folders/ files from one teacher, read only for other teachers?
- In a 2008domain, created a group "teachers"
- created a folder "teacher data" where all teachers have read/write permissions
ideal,a teacher who make's a folder in "teacher data" should be the only oen who is able to add file's to that folder and dele that folder or files. Other teachers may be able to read the content of the folder.
Is this possible to set up and how?
many thanks.
Nico.
rds

Hi Nico,
You could set the permissions below to resolve the issue:
For the root folder "teacher data": give the full control permission to CREATOR OWNER – "Subfolders and files only" and give the read/write permissions to the group "teachers"– "This folder only".
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Exact Steps to Generate Installation keys for other systems In SolMgr4.0

Hi friends,
Please provide me exact Steps to Generate Installation keys for other systems In SolMgr 4.0 SR1.
I have steps to make this thing in solmgr 3.2 as please change as it in solmgr4.0 sr1
txn SMSY
Expand Landscape components -> Systems
Right click on Systems ->New System
Type SAPID, & Installation No. (S44 , 0040099252) & sAVE
Expand Newly Added system
Right Click & Create
Now we can use the key provided by the system.
Please make required changes as applicable in solmgr4.0 So that I can proceed.
Also clear vat is the difference between ECC & ERP as solmgr4.0 mention both as two systems.
Thanks & regards
Jaswant
+91 9949676055
Cheers 'N' Joyce

Hi Jaswant,
to generate a Solution Manager Key you can process a little bit easier.
Call transaction SMSY, press shift+F5 (you get the "other objects" popup).
As System enter the SID of your Solution Manager.
->select gen.Installation/Upgrade Key (shiftctrlF10))
then you get a new popup. In this popup you DELETE all values, enter SID of the new system, the message server of the new system and the system number of the new system. Then press generate key.
With this procedure you do not have to add the system to SMSY to generate the key.
Later you should add it to SMSY, maybe you have added an SLD to SMSY then the system will be added automatically. If not you have to add it manually.
Second question ERP <> ECC
Good question, ECC is part (a main instance) of ERP, so it is up to you if you classify your system as an ERP or ECC.
Regards,
Udo Lang

Why do my artwork from a song is repeated for other songs if i didnt do anything to the other songs

i placed an artwork for a song and it automatically appeared artwork for other songs when i was playing music on my iphone, it seems like an album i didnt create it. please help this is frustrating me....

Go to preferences.Go to store .UNCHECK show itunes in cloud purchases.Click OK.I had this happen.you should not lose your songs.I did not lose mine.I believe you are merely hiding the cloud song from view.Did you "bite"at the pop-up to update itunes software.I did.That may be the culprit.

Photographer only needs photoshop from cloud. Why pay for other apps as well ?

Is it possible to get and pay for only one app in creative cloud ? It doesn't seem to be a smart idea for people like me that are photographers and NOT graphic designers , etc. I only need photoshop. Why pay the price for 25 other apps of I will never use them nor have any interest in opening anything EXCEPT photoshop??

Even if you will use just PS, you need Bridge at some point for managing images ... and Bridge is now separate in CC.
I think that Adobe wants to use the popularity of PS for other applications (especially for some web applications according to me) ... and creates an illusion by pricing policy for forcing customers to subscribe for all.
Subscriber number may be a success for now, but Adobe hurted the loyalty of some customers who use PS for a long time ...
And, I think that Adobe created a huge number of customers who will escape from Adobe at the first occasion.
In my thoughts, CC model was a great oppurtunity for making new loyal customers in addition to the present ones ... but Adobe choosen the other way.
Adobe may right for now, but the customers are always right in the long run.
My thoughts with limited writing capabilities in English ))

Enable responses from 2 internet gateways on the same system

Hello
I tried this question in the Tiger Networking forum but didn't get a response so I'm giving it a shot here.
I am hoping one of the network gurus here can help me out. I've spent quite a few hours trawling these forums and others online to try to find the answer to my question, but success has not been forthcoming.
My situation is this. I have a system that functions as a server that is connected to two separate internet connections. The G5 tower is hooked up to each via Ethernet. Each connection has a manually configured connection with a fixed IP. The gateways for each are using different IP ranges, the IP for en0 is 10.0.1.59 and en2's IP is 192.168.1.145. They each have different gateways configured as well, 10.0.1.1 and 192.168.1.1 respectively. 192.168.1.145 is the DMZ system for that internet connection. Here is the default entry in the system's routing table:
Destination Gateway Flags Refs Use Netif Expire
default 10.0.1.1 UGSc 4 8 en0
I need both interfaces to reply to requests to their public IPs backthrough the correct gateway and not the default gateway. This is because of bandwidth constraints and the need to perform nightly backups of substantial amounts of data from our business hour VOIP connection, but allow the existing default gateway to remain first in the network service order list.
I have thus far tried the following based on what I could learn from this and other forums across the Web. I have enabled forwarding with the following command:
sudo sysctl -w net.inet.ip.forwarding=1
Then I have applied a fwd rule to ipfw that purports to route requests made to the en2 local address back through the correct gateway:
sudo ipfw add fwd 192.168.1.1 ip from 192.168.1.145 to not 192.168.1.145 out
However, this does not work and there is no response from the en2 gateway when trying to access the system from that gateway's public IP.
Can anyone see something obvious that I'm missing or point me at an online resource that will let me figure out how to get this working?
Many thanks in advance.

I sounds like what you need is a static route to the IP address of whatever is on the other end of the Retrospect request. The command would look something like this:
sudo route -n add -host host_address -gateway router_address
where host_address is the IP address of whatever the Retrospect request is going to, and router_address is the gateway you want it to go out of.
A caveat here is that the route entry does not survive a reboot, so you'd want to create a startup item, or preferably a launch daemon to do this for you automatically on startup.

Table to find the interfaces for a system

Hi,
I need to find the number of inbound and outbound interfaces for a particular system.
Is there any specific table to find the total number of entries?
WE20 is a transaction to find it out manually. But I guess there is some table where we can find it in a easier way.
Kindly reply...
Thanks!.

Hi
You need to find the Message type and IDoc types
use table EDBAS for IDOC types and
EDMSG for finding message types
EDPP1 for all partner profiles
EDP12 and EDP13 for inbound and outbound views
Reward points if useful
Regards
Anji
Message was edited by:
Anji Reddy Vangala

Help in interface to other system

Hallow
I doing an inteface to other system that log the pa and I wont to now if im in the write way?
becouse i call to fm log get detail in the first time like u see below but in all perform above the function i need to call it again .
(i call it in the first time to see what action done and take care of the log if emp hire fire or just change data in infotype)
i certain that there is better way to do that i wont help with the plan,
best regards
CALL FUNCTION 'HREIC_GET_LOGGED_INFTY_CHANGES'
EXPORTING
is_log_key = is_log_key
IMPORTING
et_infty_modif = et_infty_modif. "here i get table with log
*Perform check external employee
*---FM THAT BRING ALL THE DATA WAS CHANGE--
*---- Split in this loop & Fm to all infotypes----
SORT et_infty_modif BY pernr bdate btime infty.
LOOP AT et_infty_modif INTO wa_et_infty_modif.
ON CHANGE OF wa_et_infty_modif-pernr.
ASSIGN wa_et_infty_modif-pernr TO <fs_pernr> CASTING.
ASSIGN wa_et_infty_modif-infty TO <fs_infty> CASTING.
CALL FUNCTION 'HR_INFOTYPE_LOG_GET_DETAIL'
EXPORTING
logged_infotype = wa_et_infty_modif
auth_check = 'X'
use_archive = ' '
TABLES
infty_tab_before = infty_tab_before
infty_tab_after = infty_tab_after
fields = fields.
*--- Check Action Hire/Fire/Change---
PERFORM action_type.
*---Take care on change infotype-----
IF <fs_action> = '1'.
PERFORM change_infotype.
ENDIF.
*---Take care on hire employee--
IF <fs_action> = '0'.
APPEND LINES OF et_infty_modif TO hire_tab.
DELETE hire_tab WHERE pernr NE <fs_pernr>.
SORT hire_tab BY infty.
READ TABLE hire_tab ASSIGNING <wa_hire_tab> WITH KEY infty = '0000'. "subrc = 0 its action
IF sy-subrc = 0.
PERFORM action.
ENDIF.
ENDIF.
*---Take care on delete records--
IF <fs_action> = '8'.
PERFORM delete_record.
ENDIF.
ENDON.
ENDLOOP.
FORM action_type .
IF infty_tab_after[] IS NOT INITIAL AND infty_tab_before[] IS INITIAL. "Create infotype
ASSIGN '0' TO <fs_action> CASTING.
ELSEIF infty_tab_before[] IS NOT INITIAL AND infty_tab_after[] IS NOT INITIAL." Update infpotype
ASSIGN '1' TO <fs_action> CASTING.
ELSEIF infty_tab_before[] IS NOT INITIAL AND infty_tab_after[] IS INITIAL."Delete infotype
ASSIGN '8' TO <fs_action> CASTING.
ENDIF.
ENDFORM.

hi all
i just need ideas from u please.
regards

No inbound/outbound interfaces for Business Systems

Hi,
after upgrading from XI 3.0 to PI 7.1 there are no inbound and outbound interfaces in the Communication Component definition for our Business Systems any more.
We didn't change anything in SLD.
Does anybody know why these entries are lost in 7.1?
Regards
Thorsten

Hi Thorsten,
I faced the same problem while i was trying to select the interfaces while configuring the scenario in ID.
I could not found any interfaces after i selected my Business System for the sender.
Solution: Go to the SLD.
In the technical system Go to the
Technical System------> Installed Software (TAB) and add the Product name under this tab as it appears in the IR.
After this you need to go to the corresponding business system
Business System-----> Installed Software (TAB) check the installed products under this tab.
This has done the solution for me.
Hope this will help.
Thanks
Ajay

Standard Interface for CRM System

: What standard interface does the CRM system expose to XI? For e.g. Standard IDocs or BAPI? If yes give details about the same. If NO standard IDocs / BAPI are available then do we need to write one?

Gareth,
CRM has an external interface adapter (XIF) that can send all CRM DATA to external systems. You only need to setup an RFC-destination, a XIF-site (much like the R/3 site), subscribe to the data that you want and indicate the interface format. You can choose between Idocs and XML.
The XML will be send directly to the XI. If you choose idocs, you'll have to setup an outbound idoc profile and an outbound port to interface the idocs to the XI system.
Example: suppose that you subscribe business partners to the XI-site in an XML format, then CRM will send all business partner changes to the IP address of the XI.
Grtz,
Michael.

How to call infopackage bapis for other system?

Hi Experts,
I want to start infopackage of CRM from BW using BAPI. I do not see any place to mention the target system (here CRM) where infp package should be started?
Thanks in advance,
Purvang

Hi
You can create program and call this BAPI
BAPI_IPAK_START
using follwoing statment
CALL FUNCTION 'BAPI_IPAK_START' DESTINATION 'CRMCLNT400'
EXPORTING
    INFOPACKAGE       =
*   JOBNAME           =
* IMPORTING
*   REQUESTID         =
TABLES
    RETURN            =          .
where 'CRMCLNT400' is the target system.
In case, if you are not required to use this frequent , then you can run this BAPI in se37-> Execute
then specify the target system in field RFC target sys:
Hope this helps...
Sonal....
Edited by: Sonal Patel on Dec 31, 2009 2:31 PM

Response message from RFC?

Hi
can a response from RFC have multiple messages. how will a BPM detect it?
or is there any way to capture them?
thanx

can a response from RFC have multiple messages
If u r just talking about the RFC response, then it can't be multiple. The RFC may trigger other scenarios but that would be completely new development.
Regards,
Prateek

Discoverer Portlet Provider, No Response from Application Web Server

I must have some odd configurable incorrect. I hope one of you can help me out and point me in the right direction.
My issue involves the "Discoverer List of Worksheets" portlet. It will display all the workbooks and I can drill in and see the worksheets, but, when I click/choose a worksheet, it will return within a couple seconds and display "No Response from Application Web Server" in bold red letters, then "There was no response from application ...", then "Please notify the site's webmaster ...". I have spent the day trying to lock down a log on the http server, j2ee, web cache and used enterprise manager to see logs which changed immediately after the error but didn't seem to find much.
What am I missing? Is there a timeout somewhere? Does it look like I missed something when I configured anything?
Below are the configurables and answers to some of the obvious questions.
Thanks,
BC
Windows 2003 sp1
App Server 10.1.2.2.0
Discoverer 10.1.2.54.25
ssl -> no
sso -> yes
provider registration:
http ://luke.xxx.com/discoverer/portletprovider (actual does not have a space after "http")
"cookie domain" not checked
"user has the same identity ..."
user/session --> "once per user session"
from web cache log:
10.2.2.226 - - [18/Jul/2007:18:17:33 -0700] "GET /discoverer/portletprovider/viewer?event=openWorksheetForPortal&vw_allowsaving=false&vw_sam
ewindow=false&vw_wspath=WS_INVOICE_DETAIL%2F157&vw_connkey=cf_a101&vw_portletid=0&vw_instanceid=152576_DEFAULT_LIST_OF_WORKSHEETS_PORTLET_NA
ME_241292&vw_partitionid=241292&&vw_return_url=eNrLKC ... 4hUQ%3D%3D HTTP/1.1" 302 1909 "6959909483946,0"
10.2.2.226 - - [18/Jul/2007:18:17:37 -0700] "GET /osso_login_success?urlc=v1.4~534 ... 774851DD HTTP/1.1" 503 40
2 "6959909483946,0"
from middle tier http server log:
10.2.2.226 - - [18/Jul/2007:18:17:33 -0700] "GET /discoverer/portletprovider/viewer?event=openWorksheetForPortal&vw_allowsaving=false&vw_sam
ewindow=false&vw_wspath=WS_INVOICE_DETAIL%2F157&vw_connkey=cf_a101&vw_portletid=0&vw_instanceid=152576_DEFAULT_LIST_OF_WORKSHEETS_PORTLET_NA
ME_241292&vw_partitionid=241292&&vw_return_url=eNrLKCk ... a4hUQ%3D%3D HTTP/1.1" 302 1921
from infrastructure http server log:
10.2.2.226 - - [18/Jul/2007:18:17:33 -0700] "GET /pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=v1.4~BFE8 ... HTTP/1.1" 302 4998
url being passed from provider:
http ://luke.xxx.com/discoverer/portletprovider/viewer?event=openWorksheetForPortal&vw_allowsaving=false&vw_samewindow=false&vw_wspath=WS_INVOICE_DETAIL%2F1048&vw_connkey=cf_a101&vw_portletid=0&vw_instanceid=152576_DEFAULT_LIST_OF_WORKSHEETS_PORTLET_NAME_241292&vw_partitionid=241292&&vw_return_url=eNr ... 1z9AEA6Dsegw%3D%3D
url that returns:
http ://luke.xxx.com/osso_login_success?urlc=v1.4~0C549F ... 3E94
the rest should be obvious:
Processes in Instance: rc_luke_mt1_instance.luke.xxx.com
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 5352 | Alive
OC4J | home | 2764 | Alive
OC4J | OC4J_Portal | 2452 | Alive
OC4J | OC4J_BI_Forms | 3644 | Alive
WebCache | WebCache | 5372 | Alive
WebCache | WebCacheAdmin | 2608 | Alive
HTTP_Server | HTTP_Server | 5204 | Alive
Discoverer | ServicesStatus | 5860 | Alive
Discoverer | PreferenceServer | 5580 | Alive
wireless | performance_server | 5216 | Alive
wireless | messaging_server | 4872 | Alive
wireless | OC4J_Wireless | 6116 | Alive
DSA | DSA | N/A | Down
Processes in Instance: rc_luke_infra1_instance.luke.xxx.com
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 2768 | Alive
OC4J | oca | 2312 | Alive
OC4J | OC4J_SECURITY | 5348 | Alive
HTTP_Server | HTTP_Server | 3036 | Alive
DSA | DSA | N/A | Down
OID | OID | 2492 | Alive
Congratulations! You have successfully reached your Provider's Test Page.
Recognizing Portlets...
default_gauges_portlet_name
default_worksheet_portlet_name
default_list_of_worksheets_portlet_name
Recognizing initialization parameters...
oracle.portal.log.LogLevel : 7
Recognizing component versions...
ptlshare.jar version: 10.1.2.0.2
pdkjava.jar version: 10.1.2.0.0

hi,
i also got the same error on my IE when i want to run VPE Workbench 5.6
the error :
No Response from Application Web Server
There was no response from the application web server for the page you requested.
Please notify the site's webmaster and try your request again later.
The error came up after i update the windows server (restart server), before that everything is running fine and ok.
I dont know where the problem is. Is it because the update? or Application Server?
I try to login to WEB CACHE MANAGER with the user/password default, but i still cant login.

No Response from Application Web Server - j2ee when running a long report

Using Oracle Application server, 10.1.2 and a j2ee application which uses Oracle Reports to create pdf report output.
When a report takes 5 mins or more to be produced, the following error message occurs, ending the session. The report request however does continue to run, and the pdf is eventually
produced on the server, but the user cannot retrieve it. So I know the report server is still going after getting this error:
No Response from Application Web Server
There was no response from the application web server for the page you requested.
Please notify the site's webmaster and try your request again later.
I'm assuming this is a timeout setting in a configuration file, but where?
Thx,
Tim

Hi Tim,
Take Backup of httpd.conf from Oracle_home2(midtier)
Now Edit httpd.conf, set timeout 1200 ie 20 mins (this depends on you how much time u need to set Note: Values are in seconds)
Now restart entire Mid tier
Then run the report again.
Regards
Fabian

Response from RFC as Outbuund interface for other system

Similar Messages

Maybe you are looking for