Response from server contained an error

halo
i've got problem, while working with dashbords, an error occures 'Response from server contained an error', have any one has an idea what can cause such error?
thanks for all hints
ana

Can you be a little more specific? Please post the full error message that you are getting.
Looks like this is related to obiee server response to the presentation server. Make sure your OC4J and BI server service is on while running a request.
Thanks
Prash

Similar Messages

Error:- "Response from server contained an error"

Hi,
I'm getting an error while running the dashboard Report.
It works find for two times but third time the error message comming up in dashboard Top left below dashboard prompts saying "Error:- Response from server contained an error"
I'm accesiing OBI dashboard from EBS.
Appreciate your help.
Thanks

Hi,
We also faced the same error some time back when clciking on dashboard items is logging us out.Finally we moved the dashboard pages from that dashboard to newly created dashboard and the problem is resolved.
Please check below step also .
1) When you are clicking on Dashboard was all services are up and running ,oc4j?
2. check your dashboard link also might be having symbols like &????.
Hope this help's
Thanks
Satya

Dashboard showing Error (! Error : Response from server contained an error)

Hi All,
We are facing a problem while accessing the dashboard page, when user log's in and access the dashboard page.
At this point the report start rendering, after sometime during the report rendering process we use to get this error on top of the dashboard page.After this error there were not output for any of the report on that dashboard page.
At times when user switch the page and come back to this page, reports shows the result.But most of the time user has to logout and login back, but same problem use to persist.
I have gone through with NQS Server.log and NSQ Query log., dint helped much.
Any suggestion or guidance will be really helpful.
Regards
-Saurabh

No Rhys, I have not done any kind of changes in repository, This error is suddenly start coming up..and its more frequent now..I am not sure whats happening..Is it coz of the more data load and the server is not able to process the request..but i am not able to figure out anything from the log's.
Once the error is there the user have to either switch between the pages , or have to logout and logback in..Earlier user use to do that to avoid this..But for some days even after loggin back in is not helping..
Also i have noticed one more thing, when i run the report in the Citrix server..the probablity of error is very less.
However when user run the report from there machine, they are frequently getting the error.
Thanks
-Saurabh

Webstart error: missing version response from server

We deploy our application by Java Webstart. This works most of the time, but at the last update one client got an error when trying to update.
The jnlp-file looks like this:
<?xml version="1.0" encoding="utf-8"?>

<jnlp spec="1.0+" codebase="http://xyz/webstart/app/" href="webstart.jnlp">
<information>
<title>xyz</title>
<vendor>xyz</vendor>
<homepage href="http://xyz"/>
<description>xyz</description>
<description kind="short">xyz</description>
<icon href="images/rvicon.gif"/>
<icon kind="splash" href="images/rvicon.gif"/>
<offline-allowed/>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.5+"/>
<jar href="webstart.jar" version="0.52"/>
</resources>
<application-desc main-class="UseWebStartWithIsiplan"/>
</jnlp>The webstart__V0.52.jar is located in $CATALINA_HOME/webapps/webstart/app.
The user gets the following error:
Exception:
com.sun.deploy.net.FailedDownloadException: Ressource konnte nicht geladen werden: (http://xyz/webstart/app/webstart.jar, 0.52)
at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
at com.sun.javaws.Launcher.downloadResources(Unknown Source)
at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Nested Exception:
java.io.IOException: missing version response from server
at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
at com.sun.javaws.Launcher.downloadResources(Unknown Source)
at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)The client is running Windows XP SP2 and Java version 1.6.0_03-b05.
The Server is Apache Tomcat 5.5.23, Java version 1.5.0_12-b04.
Has anybody an idea what might cause this error?

We've gotten that error when the servlet runs out of memory. The out of memory error happens when it is building the jardiff file, which can require a lot of memory to do. The servlet caches any jardiffs that it builds, so most users won't see the problem because they are requesting prebuilt jardiffs.
We've found that the servlet runs best with 256mb of max heap. But I'd imagine we are more heavy weight users than most.
I've done some stress testing on the 1.5 servlet and did not find any real memory leaks.
Based on the open source version of the servlet (which I believe is pretty much the same as the one distributed with java 1.5).
It is keeping objects in memory to track which jardiffs it has built and to track any accessed resource (jar or jnlp). If your server has enough different jars and jnlps then you need to give it enough memory to keep all these small objects in memory.
If you want be 100% sure you've given it enough memory, then you can write a script which does a HEAD request on every possible jar and jnlp inside of the servlet. That should max out its memory usage.

Error: Request failed. unexpected response from server. the status code of response is '0' in safari browser

Hi,
I am using Javascript serializer to send server side code to javascript.
This works in IE 9, Mozilla, chrome. But fails with error in Safari as "request failed. unexpected response from server. the status code of response is '0' . status text of the response is ". null
My code is as below:
<asp:UpdatePanel ID="panLayout" runat="server">
<ContentTemplate>
<div id="divloadingImage" >
<br />
<asp:Image ID="imgLoading" runat="server" ImageUrl="/images/rotate.gif" ImageAlign="Middle" />
<br />
</div>
<div id="banner-fade" >
<ul id="carousel" class="bjqs">
</ul>
</div>
<asp:Timer ID="timerRSS" Interval="1" runat="server" ontick="timerRSS_Tick"></asp:Timer>
</ContentTemplate>
</asp:UpdatePanel>
In CS:
protected void timerRSS_Tick(object sender, EventArgs e)
DisplayImages();
divloadingImage.Visible = false;
bannerfade.Visible = true;
timerRSS.Enabled = false;
private void DisplayImages()
List<SharePointListItem> allImages = GetallImages();
JavaScriptSerializer serializer = new JavaScriptSerializer();
string json = serializer.Serialize(allImages);
string script = string.Format("<script type=\"text/javascript\">var allSliderImages={0}</script>", json);
if (!this.Page.ClientScript.IsClientScriptBlockRegistered("clientScripts"))
ScriptManager.RegisterClientScriptBlock(panLayout, panLayout.GetType(), "clientScripts", script, false);
string scriptRegister = string.Format("<script type=\"text/javascript\">FetchData();</script>");
ScriptManager.RegisterClientScriptBlock(panLayout, panLayout.GetType(), "clientScriptData", scriptRegister, false);
In Javascript:
function FetchData() {
if (typeof allSliderImages !== "undefined") {
for (var i = 0; i < allSliderImages.length; i++) {
Imagesuccess(allSliderImages[i].fileleafref, allSliderImages[i].filedirref, allSliderImages[i].caption1);
var rota = $("#bannerfade");
rota.css("display", "block");
function Imagesuccess(fileLeaf, fileDir, UserCaption1) {
var ul = $('#bannerfade > ul');
var li;
var filename = fileLeaf;
var dir = fileDir;
var caption1 = UserCaption1;
var sfils = filename;
filename = dir + '/' + filename;
var imageCaptionData;
if (caption1 != null && caption1 != "") {
imageCaptionData = '<div class="HeadlineDiv">' + caption1 + '</div>';
li = $('<li>' + imageCaptionData + '<div class="SubHeadline" style="color:white;">' + '<br/></div>' + '<img src="' + filename + '"/>' + '</li>');
ul.append(li);
$('#bannerfade').bjqs({
height: 354,
width: 970,
responsive: true
Below is the data I get:
<script type="text/javascript">
var allSliderImages=[{"id":"1","Title":"Scenic","caption1":"scenic","fileleafref":"02.jpg","filedirref":"/s/Test/Library"},
{"id":"2","Title":"nature","caption1":"scenic2","fileleafref":"C034.jpg","filedirref":"/s/Test/Library"},
{"id":"3","Title":"Tiff","caption1":"Tiff","fileleafref":"test_tiff.tif","filedirref":"/s/Test/Library"}]</script>
The data is shown in all browsers except Safari. How to fix this?
Update: I have checked this link: http://sharepoint.sureshc.com/2013/07/unexpected-response-data-from-server-in.html
but that did not help.
Thanks

Hi,
From
this documentation, though SharePoint 2013 supports several commonly used web browsers including Apple Safari (latest released version), it is not guarantee
that SharePoint 2013 can run perfectly on all these browsers, “certain web browsers could cause some SharePoint 2013 functionality to be downgraded, limited, or available only through alternative steps”.
According to the code provided, it seems more relate to ASP.NET, therefore, a suggestion is that you can open a thread in ASP.NET forum, communities there will be more familiar
with this issue:
http://forums.asp.net/
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

No response from server error when transferring files

Hi, I just changed my website over from a windows based server to a linux one. I wasn't having any problems and now I can't get my files to load onto the server. I contacted the server provider who has tested things on their end and say the problem is with dreamweaver. This is the message I have been getting...
no response from server while transferring file.... reconnecting.
It says that it is putting the file, and then I receive this message again..
no response from server while transferring. 2 attempts made. try again or cancel?
if I hit cancel, then it starts putting the file and sometimes it goes through, sometimes not.
Now if I manage to get the file through, when I post it on the web and click on the link it says the file is damaged or corrupted.
Anyone have any idea how to correct this? I am new to dreamweaver and web design and I thought maybe the problem has to do with my site definition, but I can't see that there is a problem. I have noticed that before I changed the site definition for the linux server I could easily preview my pages in the browser without having to post it to the site. Now when I try to preview my pages it says that I have to put it to the site in order to view it. Could that be related?
I am working on a Mac and haven't installed a firewall.
Any help is much appreciated!!!
Thank you!

In the Site Settings (Advanced Mode) there is an option where you set up the remote connection for Passive FTP. Try checking that box and see if you are able to connect.

Missing version field in response from server when accessing resource

HY
I have a problem to use the version option of the webstart. All files are included into a war file (created with jar cvf xx.war *). This file is in the webapps folder of the Tomcat 5. The jar files from the dev. kit (jnlp-servlet.jar, jaxp.jar, parser.jar are in the WEB-INF/lib folder).
Every time I get the same message:
Category: Download Error
Missing version field in response from server when accessing resource: (http://localhost:8080/version/ademo.jar, 1.1)
Do I need a aditional file or must Iwrite a servlet???
Whats wrong
my JNLP file
<?xml version="1.0" encoding="utf-8"?>

<jnlp codebase="http://localhost:8080/version/" href="wstest.jnlp">
<information>
<title>HJP3 WebStart Demo Application</title>
<vendor>Guido Krueger</vendor>
<homepage href="http://www.javabuch.de"/>
<description>HJP3 WebStart Demo Application</description>
<icon href="wstest.gif"/>
<offline-allowed/>
</information>
<information locale="de">
<description>HJP3 WebStart Demo-Applikation</description>
<offline-allowed/>
</information>
<security>

</security>
<resources>
<j2se version="1.4+"/>
<jar href="ademo.jar" version="1.1"/>
</resources>
<application-desc main-class="Listing3813"/>
</jnlp>
my version.xml file
<jnlp-versions>
<resource>
<pattern>
<name>ademo.jar</name>
<version-id>1.1</version-id>
</pattern>
<file>application.jar</file>
</resource>
</jnlp-versions>
my web.xml file
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
     <servlet>
          <servlet-name>JnlpDownloadServlet</servlet-name>
          <servlet-class>com.sun.javaws.servlet.JnlpDownloadServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>JnlpDownloadServlet</servlet-name>
          <url-pattern>*.jnlp</url-pattern>
     </servlet-mapping>
</web-app>

The log file (jnlpdownloadservlet.log) would show the calls for the jar files if the servlet is called for the jar files (did you correct the url mapping ?). Here are a few lines from a log file
JnlpDownloadServlet(4): Initializing
JnlpDownloadServlet(3): Request: /maportal/wfe/wfeguiv.jnlp
JnlpDownloadServlet(3): User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.6) Gecko/20040206 Firefox/0.8
JnlpDownloadServlet(4): DownloadRequest[path=/wfe/wfeguiv.jnlp isPlatformRequest=false]
JnlpDownloadServlet(4): Basic Protocol lookup
JnlpDownloadServlet(4): JnlpResource: JnlpResource[WAR Path: /wfe/wfeguiv.jnlp lastModified=Tue Mar 23 17:06:56 CET 2004]]
JnlpDownloadServlet(3): Resource returned: /wfe/wfeguiv.jnlp
JnlpDownloadServlet(4): lastModified: 1080058016000 Tue Mar 23 17:06:56 CET 2004
JnlpDownloadServlet(3): Request: /maportal/wfe/wfegui.gif
JnlpDownloadServlet(3): User-Agent: JNLP/1.0.1 javaws/1.4.2_03 (b02) J2SE/1.4.2_03
JnlpDownloadServlet(4): DownloadRequest[path=/wfe/wfegui.gif isPlatformRequest=false]
JnlpDownloadServlet(3): Request: /maportal/wfe/wfegui.jar
JnlpDownloadServlet(3): User-Agent: JNLP/1.0.1 javaws/1.4.2_03 (b02) J2SE/1.4.2_03
JnlpDownloadServlet(4): DownloadRequest[path=/wfe/wfegui.jar isPlatformRequest=false]
JnlpDownloadServlet(4): Basic Protocol lookup
JnlpDownloadServlet(4): JnlpResource: JnlpResource[WAR Path: /wfe/wfegui.jar lastModified=Tue Mar 23 17:06:30 CET 2004]]
JnlpDownloadServlet(3): Resource returned: /wfe/wfegui.jarYou should see all the resources (including jar files) being requested, and whether a specific version was requested or not (in above sample, not).
I put my problems down to my application server (Orion) as other people seem to have this working. The deployment in Orion keeps the original timestamps of the jars, so I explicitly set the timestamps in my build so that the unchanged jars do not have to be downloaded all the time. This is not really a good solution, so maybe someone else can give further advice.
Brendan

Missing version filed in response from server when accessing resource

Hello all,
I am getting the following error when trying to do jar version download in webstart.
Missing version field in response from server when accessing resource(http://lo alhost:8080/jdc/jnlp/new/SimpleGUI.jar,1.0)
I am using Tomcat 5.5.
My web.xml looks like this,
<web-app>
<display-name>Tomcat Examples</display-name>
<description>
Tomcat Example servlets and JSP pages.
</description>
<servlet>
<servlet-name>
JnlpDownloadServlet
</servlet-name>
<servlet-class>
jnlp.sample.servlet.JnlpDownloadServlet
</servlet-class>
<init-param>
<param-name>
logLevel
</param-name>
<param-value>
DEBUG
</param-value>
</init-param>
<init-param>
<param-name>
logPath
</param-name>
<param-value>
c:\logs\jnlpdownloadservlet.log
</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>JnlpDownloadServlet</servlet-name>
<url-pattern>/jdc/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>JnlpDownloadServlet</servlet-name>
<url-pattern>*.jnlp</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>JnlpDownloadServlet</servlet-name>
<url-pattern>*.jar</url-pattern>
</servlet-mapping>
</web-app>
My version.xml file.
<jnlp-versions>
<resource>
<pattern>
<name>SimpleGUI_v1.0.jar</name>
<version-id>1.0</version-id>
<locale>en_US</locale>
<locale>en</locale>
</pattern>
<file>SimpleGUI_v1.0.jar</file>
</resource>
<resource>
<pattern>
<name>SimpleGUI_v2.0.jar</name>
<version-id>2.0</version-id>
<locale>en_US</locale>
<locale>en</locale>
</pattern>
<file>SimpleGUI_v2.0.jar</file>
</resource>
</jnlp-versions>
My jnlp file is as follows,
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="http://localhost:8080/jdc/jnlp/new" href="SimpleGUI.jnlp">
<information>
<title>SimpleGUI</title>
<vendor>Java Developer Connection</vendor>
<homepage href="/jdc/jnlp/new/index.html" />
<description>Demonstration of JNLP</description>
</information>
<offline-allowed/>
<resources>
<j2se href="http://java.sun.com/products/autodl/j2se" version="1.5+ " />
<jar href="SimpleGUI_v1.0.jar" version="1.0"/>
<jar href="AddLogic_v1.0.jar"/>
<jar href="SimpleGUI_v2.0.jar" version="2.0"/>
<jar href="AddLogic_v2.0.jar"/>
</resources>
<application-desc main-class="com.logic.SimpleGUI" />
</jnlp>
For the codebase if I use $$codebase then it reports an error showing,
The field <jnlp> codebase has an invalid value:$$codebase
I think the JnlpDpwnloadServlet is not getting invoked. I cant figure out my mistake. I am tired searching in forums and there is no proper answer to this problem. Any help is appreciated.
Thanks in advance.
Regards,
robi

Thanks for including all your code. I've ran into version download problems before also. In the jar reference don't include the actual __V.jar file name, just include all pre __V.jar. <jar href="AddLogic_v1.0.jar"/> would become <jar href="AddLogic.jar"/>. Now I haven't done it with the version.xml before I just did it with making file named *__V.jar.
I just re-read all that you did, if you title your files with the __V.jar notation you don't need a version.xml file.
<jar href="SimpleGUI_v1.0.jar" version="1.0"/>
Should become
<jar href="SimpleGUI.jar" version="1.0"/>
And you would have SimpleGUI_v1.0.jar on your server. Also might need it to be a capital "V" not sure.
Message was edited by:
javaunixsolaris

No response from server HTTP 500

Hi all,
I am new to Widget world (in fact this is the first one). I am trying to implement Job Monitoring widget as explained in the weblog:
/people/sergio.cipolla/blog/2007/02/19/widgets-benefits-jobs-monitor-video
I have created wrapper function module : ZBP_JOB_SELECT_SM37B
Created Webservice called: ZBP_JOB_SELECT_SM37B
I tested this web service (via web browser providing WSDL url in web services navigator) and it is working fine.
When i specify the web service URL in Widget prefernces and click on search, i m getting error "No response from server". I have followed all the steps mentioned in the web log but still i am getting errors.
I am accessing internet via proxy. Can this be a issue?
Also i read other posts regarding the same issue, which suggested to Enable all logons in SICF. Can some one give details as how to enable all logons in SICF?
Correct answers will be rewarded.
Thanks a lot.
Rashmi

Hi Sergio,
The WSDL is:
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions targetNamespace="urn:sap-com:document:sap:rfc:functions" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="urn:sap-com:document:sap:rfc:functions" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <wsdl:types>
- <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="urn:sap-com:document:sap:rfc:functions" targetNamespace="urn:sap-com:document:sap:rfc:functions" elementFormDefault="unqualified" attributeFormDefault="qualified">
- <xsd:simpleType name="RfcException.Message.Number">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="3" />
<xsd:pattern value="\d*" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char1">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="1" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char10">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char12">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="12" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char128">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="128" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char18">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="18" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char2">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="2" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char20">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="20" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char32">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="32" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char40">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="40" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char64">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="64" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char70">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="70" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="char8">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="8" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="clnt3">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="3" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="date">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
<xsd:pattern value="\d\d\d\d-\d\d-\d\d" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="numeric2">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="2" />
<xsd:pattern value="\d*" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="numeric3">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="3" />
<xsd:pattern value="\d*" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:simpleType name="time">
- <xsd:restriction base="xsd:string">
<xsd:maxLength value="8" />
<xsd:pattern value="\d\d:\d\d:\d\d" />
</xsd:restriction>
</xsd:simpleType>
- <xsd:complexType name="TBTCJOB">
- <xsd:sequence>
<xsd:element name="JOBNAME" type="tns:char32" />
<xsd:element name="JOBCOUNT" type="tns:char8" />
<xsd:element name="JOBGROUP" type="tns:char12" />
<xsd:element name="INTREPORT" type="tns:char40" />
<xsd:element name="STEPCOUNT" type="xsd:int" />
<xsd:element name="SDLSTRTDT" type="tns:date" />
<xsd:element name="SDLSTRTTM" type="tns:time" />
<xsd:element name="BTCSYSTEM" type="tns:char32" />
<xsd:element name="SDLDATE" type="tns:date" />
<xsd:element name="SDLTIME" type="tns:time" />
<xsd:element name="SDLUNAME" type="tns:char12" />
<xsd:element name="LASTCHDATE" type="tns:date" />
<xsd:element name="LASTCHTIME" type="tns:time" />
<xsd:element name="LASTCHNAME" type="tns:char12" />
<xsd:element name="RELDATE" type="tns:date" />
<xsd:element name="RELTIME" type="tns:time" />
<xsd:element name="RELUNAME" type="tns:char12" />
<xsd:element name="STRTDATE" type="tns:date" />
<xsd:element name="STRTTIME" type="tns:time" />
<xsd:element name="ENDDATE" type="tns:date" />
<xsd:element name="ENDTIME" type="tns:time" />
<xsd:element name="PRDMINS" type="tns:numeric2" />
<xsd:element name="PRDHOURS" type="tns:numeric2" />
<xsd:element name="PRDDAYS" type="tns:numeric3" />
<xsd:element name="PRDWEEKS" type="tns:numeric2" />
<xsd:element name="PRDMONTHS" type="tns:numeric2" />
<xsd:element name="PERIODIC" type="tns:char1" />
<xsd:element name="DELANFREP" type="tns:char1" />
<xsd:element name="EMERGMODE" type="tns:char1" />
<xsd:element name="STATUS" type="tns:char1" />
<xsd:element name="NEWFLAG" type="tns:char1" />
<xsd:element name="AUTHCKNAM" type="tns:char12" />
<xsd:element name="AUTHCKMAN" type="tns:clnt3" />
<xsd:element name="SUCCNUM" type="xsd:int" />
<xsd:element name="PREDNUM" type="xsd:int" />
<xsd:element name="JOBLOG" type="tns:char20" />
<xsd:element name="LASTSTRTDT" type="tns:date" />
<xsd:element name="LASTSTRTTM" type="tns:time" />
<xsd:element name="WPNUMBER" type="xsd:int" />
<xsd:element name="WPPROCID" type="xsd:int" />
<xsd:element name="EVENTID" type="tns:char32" />
<xsd:element name="EVENTPARM" type="tns:char64" />
<xsd:element name="BTCSYSREAX" type="tns:char32" />
<xsd:element name="JOBCLASS" type="tns:char1" />
<xsd:element name="PRIORITY" type="xsd:int" />
<xsd:element name="EVENTCOUNT" type="tns:char8" />
<xsd:element name="CHECKSTAT" type="tns:char1" />
<xsd:element name="CALENDARID" type="tns:char2" />
<xsd:element name="PRDBEHAV" type="tns:char1" />
<xsd:element name="EXECSERVER" type="tns:char20" />
<xsd:element name="EOMCORRECT" type="xsd:int" />
<xsd:element name="CALCORRECT" type="xsd:int" />
<xsd:element name="REAXSERVER" type="tns:char20" />
<xsd:element name="RECLOGSYS" type="tns:char10" />
<xsd:element name="RECOBJTYPE" type="tns:char10" />
<xsd:element name="RECOBJKEY" type="tns:char70" />
<xsd:element name="RECDESCRIB" type="tns:char10" />
<xsd:element name="TGTSRVGRP" type="tns:char40" />
</xsd:sequence>
</xsd:complexType>
- <xsd:complexType name="TBTCJOB_BK">
- <xsd:sequence>
<xsd:element name="JOBNAME" type="tns:char32" />
<xsd:element name="JOBCOUNT" type="tns:char8" />
<xsd:element name="JOBGROUP" type="tns:char12" />
<xsd:element name="INTREPORT" type="tns:char40" />
<xsd:element name="STEPCOUNT" type="xsd:int" />
<xsd:element name="SDLSTRTDT" type="tns:date" />
<xsd:element name="SDLSTRTTM" type="tns:time" />
<xsd:element name="BTCSYSTEM" type="tns:char32" />
<xsd:element name="SDLDATE" type="tns:date" />
<xsd:element name="SDLTIME" type="tns:time" />
<xsd:element name="SDLUNAME" type="tns:char12" />
<xsd:element name="LASTCHDATE" type="tns:date" />
<xsd:element name="LASTCHTIME" type="tns:time" />
<xsd:element name="LASTCHNAME" type="tns:char12" />
<xsd:element name="RELDATE" type="tns:date" />
<xsd:element name="RELTIME" type="tns:time" />
<xsd:element name="RELUNAME" type="tns:char12" />
<xsd:element name="STRTDATE" type="tns:date" />
<xsd:element name="STRTTIME" type="tns:time" />
<xsd:element name="ENDDATE" type="tns:date" />
<xsd:element name="ENDTIME" type="tns:time" />
<xsd:element name="PRDMINS" type="tns:numeric2" />
<xsd:element name="PRDHOURS" type="tns:numeric2" />
<xsd:element name="PRDDAYS" type="tns:numeric3" />
<xsd:element name="PRDWEEKS" type="tns:numeric2" />
<xsd:element name="PRDMONTHS" type="tns:numeric2" />
<xsd:element name="PERIODIC" type="tns:char1" />
<xsd:element name="DELANFREP" type="tns:char1" />
<xsd:element name="EMERGMODE" type="tns:char1" />
<xsd:element name="STATUS" type="tns:char1" />
<xsd:element name="NEWFLAG" type="tns:char1" />
<xsd:element name="AUTHCKNAM" type="tns:char12" />
<xsd:element name="AUTHCKMAN" type="tns:clnt3" />
<xsd:element name="SUCCNUM" type="xsd:int" />
<xsd:element name="PREDNUM" type="xsd:int" />
<xsd:element name="JOBLOG" type="tns:char20" />
<xsd:element name="LASTSTRTDT" type="tns:date" />
<xsd:element name="LASTSTRTTM" type="tns:time" />
<xsd:element name="WPNUMBER" type="xsd:int" />
<xsd:element name="WPPROCID" type="xsd:int" />
<xsd:element name="EVENTID" type="tns:char32" />
<xsd:element name="EVENTPARM" type="tns:char64" />
<xsd:element name="BTCSYSREAX" type="tns:char32" />
<xsd:element name="JOBCLASS" type="tns:char1" />
<xsd:element name="PRIORITY" type="xsd:int" />
<xsd:element name="EVENTCOUNT" type="tns:char8" />
<xsd:element name="CHECKSTAT" type="tns:char1" />
<xsd:element name="CALENDARID" type="tns:char2" />
<xsd:element name="PRDBEHAV" type="tns:char1" />
<xsd:element name="EXECSERVER" type="tns:char20" />
<xsd:element name="EOMCORRECT" type="xsd:int" />
<xsd:element name="CALCORRECT" type="xsd:int" />
<xsd:element name="REAXSERVER" type="tns:char20" />
<xsd:element name="RECLOGSYS" type="tns:char10" />
<xsd:element name="RECOBJTYPE" type="tns:char10" />
<xsd:element name="RECOBJKEY" type="tns:char70" />
<xsd:element name="RECDESCRIB" type="tns:char10" />
<xsd:element name="TGTSRVGRP" type="tns:char40" />
<xsd:element name="PROGNAME" type="tns:char40" />
<xsd:element name="XPGPROG" type="tns:char128" />
<xsd:element name="EXTCMD" type="tns:char18" />
</xsd:sequence>
</xsd:complexType>
- <xsd:complexType name="BTCSELECT">
- <xsd:sequence>
<xsd:element name="JOBNAME" type="tns:char32" />
<xsd:element name="JOBCOUNT" type="tns:char8" />
<xsd:element name="JOBGROUP" type="tns:char12" />
<xsd:element name="USERNAME" type="tns:char12" />
<xsd:element name="FROM_DATE" type="tns:date" />
<xsd:element name="FROM_TIME" type="tns:time" />
<xsd:element name="TO_DATE" type="tns:date" />
<xsd:element name="TO_TIME" type="tns:time" />
<xsd:element name="NO_DATE" type="tns:char1" />
<xsd:element name="WITH_PRED" type="tns:char1" />
<xsd:element name="EVENTID" type="tns:char32" />
<xsd:element name="EVENTPARM" type="tns:char64" />
<xsd:element name="PRELIM" type="tns:char1" />
<xsd:element name="SCHEDUL" type="tns:char1" />
<xsd:element name="READY" type="tns:char1" />
<xsd:element name="RUNNING" type="tns:char1" />
<xsd:element name="FINISHED" type="tns:char1" />
<xsd:element name="ABORTED" type="tns:char1" />
<xsd:element name="ABAPNAME" type="tns:char40" />
</xsd:sequence>
</xsd:complexType>
- <xsd:complexType name="RfcException.Message">
- <xsd:sequence>
<xsd:element name="ID" type="xsd:string" />
<xsd:element name="Number" type="tns:RfcException.Message.Number" />
</xsd:sequence>
</xsd:complexType>
- <xsd:complexType name="ZBP_JOB_SELECT_SM37B.RfcException">
- <xsd:sequence>
<xsd:element name="Name" type="tns:ZBP_JOB_SELECT_SM37B.RfcExceptions" />
<xsd:element name="Text" minOccurs="0" type="xsd:string" />
<xsd:element name="Message" minOccurs="0" type="tns:RfcException.Message" />
</xsd:sequence>
</xsd:complexType>
- <xsd:complexType name="TableOfTBTCJOB">
- <xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="tns:TBTCJOB" />
</xsd:sequence>
</xsd:complexType>
- <xsd:complexType name="TableOfTBTCJOB_BK">
- <xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="tns:TBTCJOB_BK" />
</xsd:sequence>
</xsd:complexType>
- <xsd:simpleType name="ZBP_JOB_SELECT_SM37B.RfcExceptions">
- <xsd:restriction base="xsd:string">
<xsd:enumeration value="INVALID_DIALOG_TYPE" />
<xsd:enumeration value="JOBNAME_MISSING" />
<xsd:enumeration value="NO_JOBS_FOUND" />
<xsd:enumeration value="SELECTION_CANCELED" />
<xsd:enumeration value="USERNAME_MISSING" />
</xsd:restriction>
</xsd:simpleType>
<xsd:element name="ZBP_JOB_SELECT_SM37B.Exception" type="tns:ZBP_JOB_SELECT_SM37B.RfcException" />
- <xsd:element name="ZBP_JOB_SELECT_SM37B">
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="ENDDATE" minOccurs="0" type="tns:date" />
<xsd:element name="ENDTIME" minOccurs="0" type="tns:time" />
<xsd:element name="JOBSELECT_DIALOG" type="tns:char1" />
<xsd:element name="JOBSELECT_JOBLIST" minOccurs="0" type="tns:TableOfTBTCJOB" />
<xsd:element name="JOBSELECT_JOBLIST_B" type="tns:TableOfTBTCJOB_BK" />
<xsd:element name="JOBSEL_PARAM_IN" minOccurs="0" type="tns:BTCSELECT" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
- <xsd:element name="ZBP_JOB_SELECT_SM37BResponse">
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="JOBSELECT_JOBLIST" type="tns:TableOfTBTCJOB" />
<xsd:element name="JOBSELECT_JOBLIST_B" type="tns:TableOfTBTCJOB_BK" />
<xsd:element name="JOBSEL_PARAM_OUT" type="tns:BTCSELECT" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
- <wsdl:message name="ZBP_JOB_SELECT_SM37B">
<wsdl:part name="parameters" element="tns:ZBP_JOB_SELECT_SM37B" />
</wsdl:message>
- <wsdl:message name="ZBP_JOB_SELECT_SM37BResponse">
<wsdl:part name="parameters" element="tns:ZBP_JOB_SELECT_SM37BResponse" />
</wsdl:message>
- <wsdl:message name="exception00">
<wsdl:part name="exception00" element="tns:ZBP_JOB_SELECT_SM37B.Exception" />
</wsdl:message>
- <wsdl:portType name="ZBP_JOB_SELECT_SM37B">
- <wsdl:operation name="ZBP_JOB_SELECT_SM37B">
<wsdl:input message="tns:ZBP_JOB_SELECT_SM37B" />
<wsdl:output message="tns:ZBP_JOB_SELECT_SM37BResponse" />
<wsdl:fault name="exception00" message="tns:exception00" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="ZBP_JOB_SELECT_SM37BSoapBinding" type="tns:ZBP_JOB_SELECT_SM37B">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="ZBP_JOB_SELECT_SM37B">
<soap:operation soapAction="" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
- <wsdl:fault name="exception00">
<soap:fault name="exception00" use="literal" />
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="ZBP_JOB_SELECT_SM37BService">
- <wsdl:port name="ZBP_JOB_SELECT_SM37BSoapBinding" binding="tns:ZBP_JOB_SELECT_SM37BSoapBinding">
<soap:address location="http://bladecx1.vshodc.lntinfotech.com:8000/sap/bc/srt/rfc/sap/ZBP_JOB_SELECT_SM37B?sap-client=100" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
The Web Service URL specified in Widget Prefernces is:
http://bladecx1.vshodc.lntinfotech.com:8000/sap/bc/srt/rfc/sap/ZBP_JOB_SELECT_SM37B?sap-client=100&wsdl=1.1
The only thing that i I have modified in the original widget is the name of Function Module in the main.js file. The function Module created by me is 'ZBP_JOB_SELECT_SM37B'.
Regards,
Rashmi

Socket Problem, Problem about printing the response from server

Or even I am not sure if there is a response from server. My code is like that
               //Connection between, httpProxy and target adress
               Socket clientSocket= new Socket("some host", 80);
               DataOutputStream outToServer= new DataOutputStream(clientSocket.getOutputStream());
               BufferedReader inFromServer= new BufferedReader(new     InputStreamReader(clientSocket.getInputStream()));
               //The first way
               //outToServer.writeBytes("GET http://www.somehost.com/ HTTP/1.1"+ '\n');
               //System.out.println("FROM SERVER: "+inFromServer.readLine());
               //The second way
               PrintWriter out_writer = new PrintWriter(outToServer, false);
               out_writer.println("GET http://www.somehost.com/ HTTP/1.1");
               out_writer.println("Host: localhost:80");
               out_writer.println("Connection: Close");
               out_writer.println();
                                    //The second way cont.
               String s = null;
               while ((s = inFromServer.readLine()) != null)
               System.out.println(s);
               inFromServer.close();There are the two ways that I tried, and both of them didn't work. Why they are not working ? How can I solve it ?

problem is solved, the reason it doesn't work is i didn't write the parts correctly. I mean it should be exactly the same packetIf you mean that the entire request must be sent in a single IP packet, this isn't true.
and host name must also be exactly sent to server.Of course.
They must be like in the wireshark.No. The actual data you send must be the same, but the server has no way of telling about what the IP packet looks like or how many there were.
One of your problems is that newlines in HTTP are defined as \r\n. In one case you're just using \n and in the other case you're using whatever the platform line terminator is. Neither is correct.

No Response from Server at end of day: 4.03

We're using Weblogic 4.03 on Solaris. At the end of a busy day, users
start submitting their transactions and some users start calling the
help desk saying that performance is very slow and I believe they are
getting "No Response from Server" from their browser.
We think it's the number of Execute Threads defined. I have provided
the settings when we received HelpDesk calls. We have also modified the
settings as mentioned below.
Some questions.
When does an Execute thread get used?
Can an execute thread be used for a long period of time (many seconds)
based on weblogic property settings?
Do the keepAlive properties keep a thread alive?
Does a connection keep a thread alive?
Does anyone know a way to monitor thread usage in 4.03?
In what situations can a connection use more than 1 thread?
Does anyone think we're on the right track?
We have defined the JRE to have a 64 meg heap.
We looked at the T3AdminMain console and at one point and saw 27
connections being used. It's hard for us to determine if this was the
high point for the day. We're not sure how to capture this type of
info. We're thinking if there were 27 connections and each of those
connections was somehow using 2 threads, this might explain the problem.
About our application, we have HTTP and HTTP requests coming through a
browser client and we also have a Java UI client executing T3s
connections.
The browser version sees a user login to the application without being
timed out for 20 minutes (1200 seconds). We have reduced this to 900
seconds.
Basically, we're not sure how Weblogic handles threads based on the
properties we've used. We have looked for documentation on this, but
have not found any. Any help would be much appreciated.
Please reply to my email id as well, if that's not too much trouble.
Thanks in advance for any help...
Mike
Here are some of our property file settings when we received the
problem:
weblogic.httpd.http.keepAliveSecs: 60
weblogic.httpd.https.keepAliveSecs: 360
weblogic.httpd.session.cacheEntries: 1024
weblogic.httpd.session.invalidationIntervalSecs: 60
weblogic.httpd.session.jdbc.connTimeoutSecs: 120
weblogic.httpd.session.swapIntervalSecs: 10
weblogic.httpd.session.timeoutSecs: 1200
weblogic.system.executeThreadCount: 42
weblogic.system.percentSocketReaders: 33
We have changed the settings below and restarted the server. We have
not received any feedback yet.
weblogic.httpd.http.keepAliveSecs: 30
weblogic.httpd.https.keepAliveSecs: 180
weblogic.httpd.session.timeoutSecs: 900
weblogic.system.executeThreadCount: 60

I've read previous threads about the problem with 4.5 and the rebuilding of the
bean cache on each method call resulting in slowdown of the system over time. I
also see that patches have been provided. Is this also an issue with 4.0.3 and
have fixes been made there? We also are seeing significant degradation of
performance over time during our load testing and have been unable to determine
the cause. We are running on a 4 processor NT machine with 1 gigabyte of RAM.
When we see the degradation of performance, one processor is operating at 100%
and memory is maxed out.
Thanks,
Jim Gish
Venkatesh Iyer wrote:
Mike
To begin with, can you
a) please check the access.log to determine the the "arrival rate" of the
HTTP request. If the requests are not arriving fast enough, tuning WLS will
not help.
b) monitor the WLS server through the console to check the # of requests in
the queue waiting to be processed. This will give an idea of the potential
source of the bottlenecks in the system.
Mike Upton wrote:
We're using Weblogic 4.03 on Solaris. At the end of a busy day, users
start submitting their transactions and some users start calling the
help desk saying that performance is very slow and I believe they are
getting "No Response from Server" from their browser.
We think it's the number of Execute Threads defined. I have provided
the settings when we received HelpDesk calls. We have also modified the
settings as mentioned below.
Some questions.
When does an Execute thread get used?
Can an execute thread be used for a long period of time (many seconds)
based on weblogic property settings?
Do the keepAlive properties keep a thread alive?
Does a connection keep a thread alive?
Does anyone know a way to monitor thread usage in 4.03?
In what situations can a connection use more than 1 thread?
Does anyone think we're on the right track?
We have defined the JRE to have a 64 meg heap.
We looked at the T3AdminMain console and at one point and saw 27
connections being used. It's hard for us to determine if this was the
high point for the day. We're not sure how to capture this type of
info. We're thinking if there were 27 connections and each of those
connections was somehow using 2 threads, this might explain the problem.
About our application, we have HTTP and HTTP requests coming through a
browser client and we also have a Java UI client executing T3s
connections.
The browser version sees a user login to the application without being
timed out for 20 minutes (1200 seconds). We have reduced this to 900
seconds.
Basically, we're not sure how Weblogic handles threads based on the
properties we've used. We have looked for documentation on this, but
have not found any. Any help would be much appreciated.
Please reply to my email id as well, if that's not too much trouble.
Thanks in advance for any help...
Mike
Here are some of our property file settings when we received the
problem:
weblogic.httpd.http.keepAliveSecs: 60
weblogic.httpd.https.keepAliveSecs: 360
weblogic.httpd.session.cacheEntries: 1024
weblogic.httpd.session.invalidationIntervalSecs: 60
weblogic.httpd.session.jdbc.connTimeoutSecs: 120
weblogic.httpd.session.swapIntervalSecs: 10
weblogic.httpd.session.timeoutSecs: 1200
weblogic.system.executeThreadCount: 42
weblogic.system.percentSocketReaders: 33
We have changed the settings below and restarted the server. We have
not received any feedback yet.
weblogic.httpd.http.keepAliveSecs: 30
weblogic.httpd.https.keepAliveSecs: 180
weblogic.httpd.session.timeoutSecs: 900
weblogic.system.executeThreadCount: 60
[jgish.vcf]

No response from Server while transferring Images

I am having issues with uploading images in a webgallery onto the server. I have had this problem over a long period and so i do not think that the problem is with the server speed or anything.
When I put my page it publishes any chages to format of the gallery and page but does not publish the images instead it comes up with a broken image link icon.
When publishing the log brings up this message for every image file:
"there was no response from server while transferring file"
Here is a link to the page that i am having issues with:
http://www.nigelhewitt.com.au/_links/MainMenuLinks/Menu-studio.htm
Any help would be greatly appreciated.

Are you sure that the linking to the images is correct.... and that the images are in the this folder:
_links/MainMenuLinks/p7hg_img_3/thumbs
Here is a link to an image that doesn't show up (broken image link):
http://www.nigelhewitt.com.au/_links/MainMenuLinks/p7hg_img_3/thumbs/studio_shots_and_shad ows_120509_0148_tmb.jpg
Here is an image that does show:(on another page)...
http://www.nigelhewitt.com.au/_links/ArtworksLinks/p7hg_img_2/thumbs/Bloodline_II__tmb.jpg
Actually on another look at the missing image properties, I see: 0 kB (0 bytes)
I had this happen to me the other day with a clients' site. All files I was uploading turned up at 0kb - on investigation, I found that the server had reached it's capacity and it wouldn't allow the uploading of any further files - I'm not saying this is the case here, just strange that the image file size is 0.

Can't publish - no response from server

I can no longer publish any of my websites. I keep getting the message 'no response from server' for all of them. I have waited a few hours, same result. I have unistalled and reinstalled Muse - still nothing.
As it currently stands, all of my websites are now toally useless - and I have major updates to make.
Everything was fine until I updated the product, now its totally redundant. What a 'helpful' update.
What can you do to fix the killer update Adobe?

Hi Aish
I am having the same problem! We only have one website on a BC server (the rest are non BC sites hosted on our own server), but when I select the option from the File menu to: Sync with Adobe Business Catalyst site... the following message is displayed:
Could not sign in to Adobe Business Catalyst. Check your network connection and try again. If this problem persists, try again later.
We received this message yesterday as well, so waiting is not the answer and I definitely have internet access, as all other internet related services work, e.g. email, browser, ftp etc.
The site that I am trying to sync is: http://www.mendipspringgolfclub.com/
Is this all the info you require to provide some help?
Very many thanks for your assistance.
Mike

App Store can't find any updates? No response from server.

When I open iTunes I get a message saying "a new version of iTunes is ready for download". But when I click download/update it takes me to App Store where it can't find any updates. It keeps saying "Didn't get a response from the Software Update server (198.168.1.7)." every time I check for updates. Please help! I know there is a new update for iTunes and I can't update it.
Please if you have any suggestions or ideas or explanations please let me know! I would greatly appreciate it!!!
Thanks in advance.

The system is configured to download updates from a private server, not from Apple. That server isn't working or isn't reachable. If you're bound to a network directory server, or if you're behind a firewall that doesn't allow downloading updates directly from Apple, your network administrator has to solve the problem. Otherwise, proceed as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.SoftwareUpdate.plist
Copy the selected text to the Clipboard by pressing the key combination command-C.
In the Finder, select
Go ▹ Go to Folder…
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Delete the selected file. You may be prompted for your administrator password. Restart the computer and try Software Update again.

Socket Programming-Not getting response from server.

Hi,
I am trying to communicate with server using java socket programming, I am getting the response for first two times third time when I am trying to write some thing I am not getting any response from the server,
I am writing to migrate the vb code to Java the vb is using a c++ dll to communicate with the server and we tried accessing the dll from java using JNI then it is working fine, this dll is dependent on windows so we want to avoid the dependency with windows that is why we are going for socket programming, Please help on this.

Hi,
I am writing the data in forms of string
like
Socket sockt = new Socket(ipAddress, portNo);
out= new DataOutputStream(sockt.getOutputStream());
in = new DataInputStream(sockt.getInputStream());
out.writeBytes("Serv");
out.writeBytes("Serv,32");
out.writeBytes("home,serv32,run.prg,sucess");
these are the strings to communicate with server.
I am trying to read the same
StringBuffer buf = new StringBuffer();
          byte b = '\0';
                    try {
               while ((b = in.readByte()) != '\0')
                    char ch = (char) b;
                    buf.append(ch);
          } catch (Exception e) {
               System.out.println(e.getStackTrace());
we are getting the response for the first two strings, but for the third string it is getting stucked for some time and returing some junk values like '???' we are sending the same string using JNI and it is working.

Response from server contained an error

Similar Messages

Maybe you are looking for