Response from webservice needs to send as Mail content

Hello,
i have to configure a scenario as given below
           IDOC --> JDBC --> WebService and response from WebService to SMTPmail receiver.
now i got strucked at Webservice response. after i got the response from WebService(SOAP), i need to send the both Request and response to Mail Receiver. So Please let me know how to capture request and response both to my SMTPmail adapter(as content or attachment).let me know the steps to proceed for SMTPmail Receiver
Regards,SARAN

Hi Raj,
Thanks for teh reply.
i have already configured teh above mentioned scenario.but i am not able to get Request and response.
Could you pelase provide teh steps how to configure BPM in this scenario..(as ia m not handson with BPM)
Reagrds,Saran

Similar Messages

  • No response from WebService

    Hi, well i read file and want to send data to WS while getting info back, that data is transmitted. But because it should be synchronous i don't get any response from WS.
    What might be wrong?! even if the WS would answer, there should be an entry in Monitor!?
    br

    Ur sender is file which could not be sync. If u want to get the response from webservice, then u need to configure Async-Sync bridge using BPM.
    Regrads,
    Prateek

  • Need to send a mail while safty stock goes down

    Dear experts,
    I Need to send a mail to concern persion while stock goes down from safty stock. We plan to put a check at the point of MARD table updation, Because we not able to put a check at the all transaction codes, So please LET ME KNOW HOW TO PUT A CHECK AT STANDARD TABLE UPDATION?
    Thanks in adv,
    jayakumar.M

    Hi Jai,
    According to my understanding,
    As soon as the stock goes down from the safety stock a mail should be triggered.
    Probable solution (in my opinion)
    create a flag in the table set it whenever the stock value goes down.
    make calculations like (safety stock as today - safety stock previous date) = 0 if not set the flag and construct a workflow withe receiver settings based on the flag field and trigger a mail to the concerned person.
    This is just my idea.
    Try it and revert
    Thanks and Regards
    Srikanth.P

  • Any changes in PA30 need to send a mail to the Managers outlook inbox

    Hi,
    Any changes in PA30 (ESS) need to send a mail to the Managers outlook inbox  .
    Kindly let me know the Standard workflow template and  to built the Custom function module in Rule .
    Thanks in advance,
    Richard A

    <i>Any changes in PA30 (ESS) need to send a mail to the Managers outlook inbox</i>
    If its just an email do u need a workflow for it? Configure dynamic actions which will call a subroutine when a change is made to the infotype and send email from that subroutine using SO_NEW_DOCUMENT_SEND_API1.(you can include the necessary logic for determining the approver in the same subroutine).
    Thanks,
    Prasath N

  • Need to send a mail while safty stock goes down compare with actual stock

    Dear experts,
    I Need to send a mail to concern persion while stock goes down compare with safty stock. We plan to put a check at the point of MARD table updation, Because we not able to put a check at the all transaction codes, So please LET ME KNOW HOW TO PUT A CHECK AT STANDARD TABLE UPDATION?
    Thanks in adv,
    jayakumar.M

    Your best bet may to be place your check in the a user exit for goods movements.  The enhancement is MB_CF001, the component is EXIT_SAPLMBMB_001.
    Hope this helps,
    Mark

  • Need an enhancement after releasing a PO Need to send a mail to vendor

    Hi all,
              I am having a requirement that, need to send a mail and attachment whenever a PO get released.
    Can anyone help to find the enhancement for to write the code to send a mail to vendor.
    Regards.
    Ranganadh.

    Hi,
    To send a mail when a new PO is created.
    can be achievd by using  class cl_bcs and BADI method
    IF_EX_ME_PROCESS_PO_CUST~POST of BADI ME_PEOCESS_PO_CUST.
    We can aslo configure the OUTPUT TYPE as MAIL in transaction NACE. This is usually doen by the Functional consultant.
    Pls look into these exapmles which clearly explains abt the process of sending a  mail-
    Sending Mail using class cl_bcs
    Re: Mail sending program
    Re: SCOT and FM 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • While creating Purchase Requisition we need to send a mail for approvers

    Hi All,
    While creating Purchase requisition we need to send a mail to approvers.
    Dowe  need to create Function module ?
    if You know the steps can you please give me the steps.
    Thanks In advance
    Sriman.

    Hi Sriman
    Here we can try for 2 approach
    one is workflow and other his sending emails via user exit.
    I am not much aware about workflow, but you can explore for user exit.
    Try for enhancement component 'MEREQ001'.
    let me know, if you need further help
    Regards
    MD

  • Attachments send as mail content

    I have experienced the following several times:
    When sending a mail with word or xls file attached, the files are being send as mail content !
    Workaround is to open the attached files, make a bogus change+save and resend--> problem solved.
    Very annoying problem ! Doesn't happen always but when it happens it can be reproduced...
    Related to 10.5.2? (I don't recall to have the same problem under 10.5.1)
    Anyone with simular problems? Solutions?
    Ex:
    --Apple-Mail-4-903560157
    Content-Disposition: attachment;
    filename=persberichtwedstrijd_AGH_15032008v2.doc
    Content-Type: application/octet-stream;
    x-unix-mode=0755;
    name="persberichtwedstrijd_AGH_15032008v2.doc"
    Content-Transfer-Encoding: base64
    0M8R4KGxGuEAAAAAAAAAAAAAAAAAAAAAPgADAP7/CQAGAAAAAAAAAAAAAAACAAAAzwAAAAAAAAAA
    EAAA0QAAAAEAAAD+////AAAAAM0AAADOAAAA////////////////////////////////////////
    ///////////////////////////////////////////////////////////////////////////s
    pcEAcWATBAAA+BK/AAAAAAAAEAAAAAAABgAA3A0AAA4AYmpianFQcVAAAAAAAAAAAAAAAAAAAAAA
    AAATBBYAF8QAABM6AQATOgEA3AUAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAD//w8AAAAA
    AAAAAAD//w8AAAAAAAAAAAD//w8AAAAAAAAAAAAAAAAAAAAAAKQAAAAAAMgEAAAAAAAAyAQAAMgE
    AAAAAAAAyAQAAAAAAADIBAAAAAAAAM

    A workaround may be to use Finder's "Crete Archive..." and send the compressed version.

  • Need to send a mail from a specific From mail ID thorgh specific Mail serve

    Hi,
    If any errors occured in my interface validation program(plsql) I need to send mail to some mail ids,
    But I need to use specific from mail id and mail server.
    I have no idea of Shell scripting, I tried it with plsql itself but not worked. My Application server is different from DB server.
    Please let me know if any one has the code or any thoughts.
    Thanks

    Please see these links.
    https://forums.oracle.com/forums/search.jspa?threadID=&q=UTL_SMTP&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Send+AND+email+AND+PL%2FSQL&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Email+AND+PL%2FSQL&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • How to update the Sent Idoc Status based on the Response From Webservice

    Hi All,
    I have to develop Idoc--SOAP Sync Process Scenario Using BPM .
    I have configured every thing using BPM and mapped
    MATMAS----SOAP Request
    SOAP Resp----STATUS.SYSTAT01
    In R/3  the Main Idoc Number(MATMAS) Status needs to be update , but it is creating the new Idoc with STATUS.SYSTAT01.
    I have used STATUS.SYSTAT01 Idoc to Update the status of the Original idoc based on the Response that is coming from webservice .
    I was posted the same thread a days ago and there Bhavesh suggested me some sugessions.
    How can we make the status of the Idoc based on some response Text
    iam unable to follow OR not able to clear my self on this.
    Please suggest me or give some over view kind of thing on this
    Regards

    Hi Suman,
    It is clearly mentioned in SAP help that "SAP Intermediate Documents (IDOCS) are EDI like documents that are asynchronous in nature."
    So Your Scenario is Asynch(receive) - Synch(WS call) -Transformation (Multimapping)- Asynch(Send to R/3).
    now go in this way:
    you can develop all the message Interfaces  of  Abstract catagory (not manditory )
    MI_AA_MATMAS   -> Abstract Asynchronous message    interface for your Matmas IDOC
    MI_AS_SOAP_ReqandResp  -> Abstarct Syncronous MI for SOAP request and response.
    MI_AA_STATUS ->Abstract Asyncronous MI for Status Idoc
    MI_AA_SOAP_Req ->  Abstarct Asyncronous MI for SOAP request .
    MI_AA_SOAP_Res ->  Abstarct Asyncronous MI for SOAP response .
    Thats all in Message interface.
    your first reciever :
    (This will receive the message asynchronously from R/3)
    create a conatainer varaiable (say preceive) and assign it message interface MI_AA_MATMAS
    Now in thw Propert TAB of this step: give this message name.
    Step2: Synchronous call :
    create container Variable psoaprequest and psoapresponse  give abstract message interface MI_AA_SOAP_Req and MI_AA_SOAP_Req  resp.
    Now in thw Propert TAB of this step:
    Synchronous Interface : MI_AS_SOAP_ReqandResp
    Request Message : psoaprequest
    Response Message: psoapresponse
    Transformation Step :
    Here you will specify Interface Mapping that will conatain Multimapping between Synch Response - MATMAs and STATUS
    Let's name it as IM_ResandMatmasToStatus
    create a container variable as pstatus and assign it abstract interface MI_AA_STATUS.
    In Property pan of this step :
    Interface mapping :IM_ResandMatmasToStatus
    Source Message :psoapresponse
                                preceive
    (IT will ask you for two source messages as IM selected in this transformation has 2 source messages)
    Target Message :pstatus
    Send step:
    Select a message as pstatus.
    thats all in IR.
    If have doubt in ID just let me know.
    Thanks
    Sunil Singh

  • Need to send a mail when job window time is over

    Hi ,
    select * from v$version;
    Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
    PL/SQL Release 11.2.0.2.0 - Production
    CORE 11.2.0.2.0 Production
    TNS for Linux: Version 11.2.0.2.0 - Production
    NLSRTL Version 11.2.0.2.0 - Production
    ========
    I have created a job using dbms_scheduler.create_job with a 1 hour window ( created using dbms_scheduler.create_window ) .
    My job triggers a stored procedure . Now I have a send_mail code at the end of the stored procedure which sends a mail with plsql log as an attachment . When my job runs more than 1 hour the stored proc is getting stopped and not triggering the mail though I put the same code in exception block ( exception when others ) .
    CREATE OR REPLACE PROCEDURE my_sp
    AS
    BEGIN
    -- some code ---
    begin
    -- send mail --
    end
    EXCEPTION
    WHEN OTHERS
    THEN
    send mail ( Can I get this piece when window time is over )
    END;
    Is there any other way I can run the last piece of the proc (send_mail) .
    Thanks ,
    Mahesh

    Mahesh wrote:
    Folllowing below note .
    http://download.oracle.com/docs/cd/E14072_01/server.112/e10595/scheduse008.htm
    but need to attach a file .
    SQL> desc utl_mail
    PROCEDURE SEND
    Argument Name               Type               In/Out Default?
    SENDER                VARCHAR2          IN
    RECIPIENTS               VARCHAR2          IN
    CC                    VARCHAR2          IN     DEFAULT
    BCC                    VARCHAR2          IN     DEFAULT
    SUBJECT               VARCHAR2          IN     DEFAULT
    MESSAGE               VARCHAR2          IN     DEFAULT
    MIME_TYPE               VARCHAR2          IN     DEFAULT
    PRIORITY               BINARY_INTEGER          IN     DEFAULT
    REPLYTO               VARCHAR2          IN     DEFAULT
    PROCEDURE SEND_ATTACH_RAW
    Argument Name               Type               In/Out Default?
    SENDER                VARCHAR2          IN
    RECIPIENTS               VARCHAR2          IN
    CC                    VARCHAR2          IN     DEFAULT
    BCC                    VARCHAR2          IN     DEFAULT
    SUBJECT               VARCHAR2          IN     DEFAULT
    MESSAGE               VARCHAR2          IN     DEFAULT
    MIME_TYPE               VARCHAR2          IN     DEFAULT
    PRIORITY               BINARY_INTEGER          IN     DEFAULT
    ATTACHMENT               RAW               IN
    ATT_INLINE               BOOLEAN           IN     DEFAULT
    ATT_MIME_TYPE               VARCHAR2          IN     DEFAULT
    ATT_FILENAME               VARCHAR2          IN     DEFAULT
    REPLYTO               VARCHAR2          IN     DEFAULT
    PROCEDURE SEND_ATTACH_VARCHAR2
    Argument Name               Type               In/Out Default?
    SENDER                VARCHAR2          IN
    RECIPIENTS               VARCHAR2          IN
    CC                    VARCHAR2          IN     DEFAULT
    BCC                    VARCHAR2          IN     DEFAULT
    SUBJECT               VARCHAR2          IN     DEFAULT
    MESSAGE               VARCHAR2          IN     DEFAULT
    MIME_TYPE               VARCHAR2          IN     DEFAULT
    PRIORITY               BINARY_INTEGER          IN     DEFAULT
    ATTACHMENT               VARCHAR2          IN
    ATT_INLINE               BOOLEAN           IN     DEFAULT
    ATT_MIME_TYPE               VARCHAR2          IN     DEFAULT
    ATT_FILENAME               VARCHAR2          IN     DEFAULT
    REPLYTO               VARCHAR2          IN     DEFAULT

  • Need to send a mail back to the user in Sender Mail adapter Scenario

    Hi all,
    I have a scenario where the user fills the Price form  or the Article form (which is a Adobe Form).When the user clicks on the "submit" button,the form is converted into xml , gets attached to the mail and sent to PI.
    Now the user sometimes attaches the pdf directly instead of submitting the form. This results in the mail being sent
    with pdf  as attachment.
    Now my requirement  is to send a mail back to the user asking them to send an xml  instead of a pdf.
    How can this be done ?
    Kindly let me know friends.
    Quick Response is appreciated.

    hi Sanjay,
    Have a look on Michal's blog, it's for JMS, but it works for others: [PI/XI: Quick tip: Preserving attributes of XI messages via MultipartHeaderBean|PI/XI: Quick tip: Preserving attributes of XI messages via MultipartHeaderBean]
    Mickael

  • How to use alias in "From" field when I send a mail with utl_smtp ?

    Hi all,
    I'm using a PL/SQL package with an Oracle 11G database to send mails. It works fine but instead of use of my mail in "From" field like "[email protected]" as sender E-mail address, I would like to have "Toto" in the sender address. I tryied to use utl_smtp.mail(l_connection, '<toto> [email protected]') but it doesn't work. The only way I can send mail is when I set utl_smtp.mail(l_connection, '<[email protected]>') directly. When I use the Alias, I have an error from smtp server telling that I use a bad syntax address.
    Does someone know how to use the alias ? Where do I do a mistake ?
    Thank you for your help.
    sis2b

    Thank you, I find how to solve the problem thanks to your link.
    I try to send HTML E-mail so I had the From in the from field writen in the header of the mail and not to initialize the connection.
    sis2b.

  • Information about arguments needed to send a mail

    Hi,
    I am very new to java mail. I am jus trying to send a mail using java mail. Can anyone please tell me wht are the command line arguments, tht i have to give in the following code.
    import java.util.Properties;
    import javax.mail.*;
    import javax.mail.internet.*;
    public class MailExample {
    public static void main (String args[]) throws Exception {
    String host = "args[0]";
    String from = "args[1]";
    String to = "args[2]";
    final String username ="args[3]";
    final String password = "args[4]";
    // Get system properties
    //Properties props = System.getProperties();
    Properties props = new Properties();
    // Setup mail server
    props.put("mail.smtp.host", host);
    props.put("mail.smtp.auth", "true");
    // Get session
    Session session = Session.getDefaultInstance(props,
              new javax.mail.Authenticator() {
              protected PasswordAuthentication getPasswordAuthentication() {
              return new PasswordAuthentication(username, password);
    // Define message
    MimeMessage message = new MimeMessage(session);
    // Set the from address
    message.setFrom(new InternetAddress(from));
    // Set the to address
    message.addRecipient(Message.RecipientType.TO,
    new InternetAddress(to));
    message.addRecipient(Message.RecipientType.CC,
    new InternetAddress("[email protected]"));
    message.addRecipient(Message.RecipientType.BCC,
    new InternetAddress("[email protected]"));
    message.addRecipient(Message.RecipientType.BCC,
    new InternetAddress("[email protected]"));
    // Set the subject
    message.setSubject("Hello JavaMail");
    // Set the content
    message.setText("Welcome to JavaMail");
    // Send message
    Transport.send(message);
    }

    Hello,
    You can send mail with the status of the test catalog-
    specify a mail system to which Test Workbench test objects send messages to the people responsible
    Please refer the below link for more information:
    http://help.sap.com/saphelp_smehp1/helpdata/en/6a/88370a002911d2bd02080009b4534c/frameset.htm
    Regards,

  • Working in ECC 5.0..After approve, i need to send confirmation mail to all

    Hi,
    I am working in ECC 5.0...This is my requirement..
    After receiving the workitem approval message in managers inbox..after he approves/rejects,whatever approval i need to send back confirmation mail to Employee as well as payroll and admistrator and also two managers.
    Could u pls... how can i proceed with this scenario..
    Thanks and Have a nice day!!!
    Soni

    Hi Soni,
    We have handled a similar requirement in our project  , by writing a Custom function module for sending mails to Initiator, Payroll and managers approving the form.
    Actually we had created a custom function module for sending a mail.
    And this was called in one of the Method of the Business Object. (e.g: SENDMAIL - ZBUS7051 )
    and a background Step was defined in the Workflow template, which uses a task defined using the BOR Object - ZBUS7051 - SENDMAIL.
    Hope this helps.
    Regards,
    Raj

Maybe you are looking for