Response Speed painfully slow

I'm at 14,000 words in my script and all views are off, yet the lag time in editing and in cases when I switch functions, such as character to action, can be up to 8-10 seconds. What can I do to improve this situation?? I'm using a MacBook, 2.4 Ghz, 4 GB memory. Snow Leopard.

I fixed my ping and downloadspeed by entering " test" at clientID which i read somewhere on another forum.
I get a steady 28 ms ping and 20 mb/s download but still 0.05 upload ;(

Similar Messages

HomeHub 3 - USB speeds painfully slow - known issu...

Hello I have a BT HomeHub 3 - FW version 12 - on Infinity Option 2.
I have recently bought a WD 2TB external drive and connected it to the USB port on the homehub in the hopes to have all my media on it to share across the network.
It attached fine, was detected fine, and I've successfully mapped it as a network drive on my PC without a problem.
The drive is formatted in NTFS, and my PC is connected to the homehub via the gigabit port.
The read and write speeds though are painfully slow - pretty much solid at 2.0MB/s. Is this just "how it is" or is there a solution, because as it stands I can't see the point in there even being a USB port! I could download another version of the file 4 times faster from the internet than I could copy it locally to the HDD!!
I can't find any information about this or indeed see many complaints, so I'm wondering if this is just mine?
Any feedback would be appreciated - happy to receive technical answers.
Thanks for any help!

Keith, I have to say that your answer gives no technical insight of the situation,
I highly doubt that this device does not have the processing power to do a transfer of more than 2-3 Mb/Sec,
Don't forget there's even a gigabit ethernet port, and you can easily achieve very high speeds using lan or even the internet connection - forget that this is due to the hub being slow - no chance.
Second point you mention, SMB protocol is not that efficient, that's not the reason for slow speeds again. I can confirm I've got an SMB server setup on a Linux 5 yeard old netbook in the Lan and it's still performing faster than 2 Mb / Sec. SMB is again NOT the problem.
It's most likely a firmware issue where the USB port is either throttled down intentionally or not utilized as a proper USB 2.0 port - I think BT or whoever makes this box ought to give the community an explanation on the matter. When claiming that the usb port can be used to connect storage media they should also mention that the maximum speed is not more than 3 Mb/Sec - otherwise the statement is misleading as most people know that usb storage media perform a lot faster when connected to computers.
It's like someone telling you, that his car drives like ferrari, but not telling you that it cannot do more than 20 mph.

Howto speed up painfully slow computer???

I have a 12" powerbook g4 that was the last model before the intel macs. it has a 1.5 Gig processor and 512 megs of ram. it has an 80 gig HD with 15 gigs free.
it is painfully slow. i don't run a lot of apps at the same time, i have restarted, i have repaired disk permissions and run disk utility. i also ran onyx.
my wife has a pre-intel ibook that has less power but runs significantly faster running essentially the same apps.
how can i speed up my computer?
thank you.

Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.6.1 is Leopard compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that presently AppleJack is not compatible with Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
8. Data Backup (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com.

Just upgraded to OS X Lion. Now Safari behaves erratically. Some sights load at lightning speeds, other load painfully slow or not at all. Any ideas here?

Just upgraded to OS X Lion. Now Safari behaves erratically. Some sites load at lightning speeds I have never seen before, others load painfully slow or not at all. Any ideas here?

I would recommend running Disk Utility (Applications - Utilities - Disk Utility) and Repairing Disk Permissions. Please run this at least 2x. It that doesn't help then post back, there are many other things to try.

Painfully slow connection with new master socket

Hi forum
Hoping for some advice or perspective on possible issue with my broadband connection. Perhaps unrelated, but I recently had a new master socket fitted (NTE5), however the broadband speed in the house is now painfully slow.
Am using BT Home Hub 4, below are the rest results I'm receiving, however I'm curious as to whether 0.25Mbps really is likely to be the maximum achievable speed, as this renders several services almost unusable.
Grateful if anyone feels there is more that could be done.
Thanks,
Kevin
Results....
The only socket connected is for the router/ phone, which is now connected to the test socket (with a microfilter).
Quiet line test: normal
Speed info from the hub manager (normal socket/ test socket)
Download speed (Mbps): 0.17 / 0.24
Upload (Mbps):                0.03 / 0.02
Ping latency (ms): 326.50 / 0.00
ADSL connection (from home hub)
12:02:59, 29 Jun.
(334146.810000) DSL noise margin: 16.50 dB upstream, 10.60 dB downstream
12:02:58, 29 Jun.
(334145.900000) DSL line rate: 440 Kbps upstream, 284 Kbps downstream
Speed test (from BTW performance test)
1. Best Effort Test:  -provides background information.
Download Speed
0.17 Mbps
0 Mbps
0.25 Mbps
Max Achievable Speed
Download speedachieved during the test was - 0.17 Mbps
For your connection, the acceptable range of speeds is 0.1 Mbps-0.25 Mbps.
IP Profile for your line is - 0.25 Mbps
2. Upstream Test:  -provides background information.
Upload Speed
0.03 Mbps
0 Mbps
0.83 Mbps
Max Achievable Speed
Upload speed achieved during the test was - 0.03Mbps
Additional Information:
Upstream Rate IP profile on your line is - 0.83 Mbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
Please visit the FAQ if you are unable to understand the test results.
From kitz.co.uk max speed calculator
Estimation of your maximum rate adaptive adsl speed
Downstream
Attenuation
0 dB
Approx
Line Length
0 km
From BT Diagnostics site:
Broadband Speed Test
We haven't been able to complete the speed test at this time.
This may be due to a problem with the speed tester, or your line may be running very slowly.

Thanks for your quick response, much appreciated. Further results below - suggesting that faster should be possible?
The connection time from 12 was due to a manual reset, the only time it was reset (WAN logs also noted below).
ADSL Checker....
Telephone Number 01562xxxxxx on Exchange WOLVERLEY is served by Cabinet 3
Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date
WBC ADSL 2+
Up to 13.5
11.5 to 15
Available
WBC ADSL 2+ Annex M
Up to 13.5
Up to 1.5
11.5 to 15
Available
ADSL Max
Up to 8
7 to 8
Available
WBC Fixed Rate
2
Available
Fixed Rate
2
Available
Other Offerings
Copper Multicast
Available
12:02:59, 29 Jun.
(334146.810000) DSL noise margin: 16.50 dB upstream, 10.60 dB downstream
12:02:58, 29 Jun.
(334145.900000) DSL line rate: 440 Kbps upstream, 284 Kbps downstream
12:01:36, 29 Jun.
(334063.890000) DSL is down after 2226 minutes uptime
12:01:36, 29 Jun.
(334063.890000) ETHoA is down after 2226 minutes uptime
12:01:36, 29 Jun.
(334063.550000) PPPoA is down after 2226 minutes uptime [Waiting for Underlying Connection (WAN DSL - Up)]
12:01:33, 29 Jun.
(334060.470000) PPP LCP Send Termination Request [User request]

Open and Save dialogs are painfully slow. Is there a solution?

Open and Save dialogs are painfully slow. Is there a solution?

I pulled this part out of one of the topics Barney-15E linked to. It absolutely works! The glacially slow Finder response has been driving me batty in Mavericks. Each time I restarted, it would take forever to list the startup drive when I opened it. Open and Save dialogues were also painfully slow to respond. Now they all snap open and list instantly. I used TextWrangler to comment out the line in the file auto_master, then ran the automount command in Terminal.
Working workaround:
Use the following statements in Terminal.
sudo vi /etc/auto_master
In this file comment out /net with # (#/net .....)
sudo automount -vc
Fixed.
Confirmed here too both for Preview.app Open file sluggishness and Finder window population. Thanks Snaggletooh_DE!
Couple of notes:
(1) Some folks may be more comfortable using a GUI editor like TextWrangler instead of vi
     a) in the Finder use the GO menu and select Go to Folder
     b) type '/etc' ( without single quotes ) in the Go to folder dialog box and press the Go button
     c) Right ( Control ) click the auto_master file in the resulting Finder window. Select "Open with...." and use TextWrangler ( your choice )
     d) Comment out the line by inserting a '#' ( pound sign ) as noted in Snaggletooth_DE's instructions
     e) Save the file ( probably need to authenticate with your admin password )
     f) Do the 'sudo automount -vc' per Snaggletooth_DE's instructions. Will need to authenticate again.
(2) Notice Snaggletooth_DE described this as a "workaround" because it bypasses an Apple bug. Presumably most people have not changed their auto_master file and it worked fine in Mountain Lion and prior. In other words: If you haven't done so already, please continue to submit feedback and bug reports to Apple for this issue.
Kudos to Snaggletooth_DE for figuring out code is trying to look at network ( NFS ) volumes that maybe don't exist.

My MacBook Pro is running painfully slow all of a sudden. I am trying to clean up my iPhoto library and it's all of a sudden running really slow. I've uninstalled and disabled as many unnecessary apps as possible as far as I can tell.

Here is the etrecheck info. Please advise... thank you!
Problem description:
iPhoto is running painfully slow. My library is on an external hard drive. It was runing just fine yesterday. i disabled Dropbox and a few other applications, to no avail.
EtreCheck version: 2.1.5 (108)
Report generated January 7, 2015 at 12:40:17 PM EST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:55:4
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (54.79 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Seagate Backup+ Desk 4 TB
disk2s1 (disk2s1) <not mounted> : 262 KB
Seagate Backup Plus Drive (disk2s3) /Volumes/Seagate Backup Plus Drive : 4.00 TB (2.73 TB free)
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Logitech USB Receiver
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.logmein.driver.LogMeInSoundDriver (4.1.46f67) [Support]
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.3 - SDK 10.4) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.3 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.3 - SDK 10.5) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.3 - SDK 10.4) [Support]
Startup Items: ℹ️
ProTec6b: Path: /Library/StartupItems/ProTec6b
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[loaded] com.citrix.AuthManager_Mac.plist [Support]
[running] com.citrix.ReceiverHelper.plist [Support]
[running] com.citrix.ServiceRecords.plist [Support]
[invalid?] com.logmein.LMILaunchAgentFixer.plist [Support]
[not loaded] com.logmein.logmeingui.plist [Support]
[not loaded] com.logmein.logmeinguiagent.plist [Support]
[not loaded] com.logmein.logmeinguiagentatlogin.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[not loaded] com.gopro.stereomodestatus.plist [Support]
[not loaded] com.logmein.logmeinserver.plist [Support]
[invalid?] com.logmein.raupdate.plist [Support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.sharpcast.xfsmond.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
Dropbox Application (/Applications/Dropbox.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
ThisLife Uploader ApplicationHidden (/Applications/ThisLife Uploader.app)
WDQuickView Application (/Library/Application Support/WDSmartWare/WDQuickView.app)
Internet Plug-ins: ℹ️
LogMeInSafari64: Version: 1.0.586 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
LogMeIn: Version: 1.0.586 [Support]
Silverlight: Version: 4.0.60831.0 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
LogMeInSafari32: Version: 1.0.586 [Support]
CitrixICAClientPlugIn: Version: 11.8.0 - SDK 10.7 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
Picasa: Version: 1.0 [Support]
Safari Extensions: ℹ️
Evernote Web Clipper [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
GoPro [Support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 264.06 GB
Destinations:
Seagate Backup Plus Drive [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 264.06 GB X 3)
Top Processes by CPU: ℹ️
      8% WindowServer
      2% Safari
      1% mds
      1% loginwindow
      0% AppleSpell
Top Processes by Memory: ℹ️
2.13 GB iPhoto
610 MB Image Capture Extension
155 MB mds_stores
129 MB Safari
129 MB Finder
Virtual Memory Information: ℹ️
48 MB Free RAM
3.71 GB Active RAM
3.68 GB Inactive RAM
1.04 GB Wired RAM
6.89 GB Page-ins
293 MB Page-outs
Diagnostics Information: ℹ️
Jan 7, 2015, 12:28:48 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-122848_[redacted].cpu_resourc e.diag [Details]
Jan 7, 2015, 12:13:08 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-121308_[redacted].hang
Jan 7, 2015, 12:07:39 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-120739_[redacted].cpu_resourc e.diag [Details]
Jan 7, 2015, 12:02:48 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-120248_[redacted].hang
Jan 7, 2015, 11:51:45 AM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-115145_[redacted].cpu_resourc e.diag [Details]
Jan 7, 2015, 11:45:54 AM Self test - passed
Jan 6, 2015, 05:01:58 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-01-06-170158_[reda cted].crash
Jan 5, 2015, 02:12:40 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-05-141240_[redacted].cpu_resourc e.diag [Details]
Jan 5, 2015, 10:04:15 AM /Library/Logs/DiagnosticReports/com.apple.MediaLibraryService_2015-01-05-100415 _[redacted].cpu_resource.diag [Details]
Jan 4, 2015, 05:28:20 PM /Users/[redacted]/Library/Logs/DiagnosticReports/HandBrake_2015-01-04-172820_[r edacted].crash
Jan 4, 2015, 05:28:04 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-01-04-172804_[reda cted].crash
Jan 4, 2015, 03:09:50 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Finder_2015-01-04-150950_[reda cted].crash
Jan 4, 2015, 03:09:15 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-01-04-150915_[reda cted].crash

Start time: 15:08:00 01/08/15
Model Identifier: MacBookPro6,2
System Version: OS X 10.10 (14A389)
Kernel Version: Darwin 14.0.0
Time since boot: 1 day3:22
Memory
    BANK 0/DIMM0:
      Size: 4 GB
      Speed: 1067 MHz
      Status: OK
      Manufacturer: 0x859B
    BANK 1/DIMM0:
      Size: 4 GB
      Speed: 1067 MHz
      Status: OK
      Manufacturer: 0x859B
SerialATA
   Hitachi HTS545032B9SA02
USB
   Backup+ Desk (Seagate LLC)
   USB Receiver (Logitech Inc.)
FileVault: On
Diagnostic reports
   2014-12-17 Safari crash
   2014-12-17 com.apple.appkit.xpc.openAndSavePanelService crash
   2014-12-17 garcon crash x4
   2014-12-27 Finder crash
   2014-12-27 ThisLife Uploader crash
   2014-12-27 garcon crash x2
   2014-12-28 Finder crash
   2014-12-28 garcon crash x3
   2014-12-31 com.apple.appkit.xpc.openAndSavePanelService crash
   2014-12-31 garcon crash
   2015-01-02 Finder crash
   2015-01-02 garcon crash
   2015-01-05 Finder crash
   2015-01-05 HandBrake crash
   2015-01-05 garcon crash x2
   2015-01-07 garcon crash
   2015-01-08 iPhoto hang x2
Log
   Jan 7 11:47:39 com.apple.xpc.launchd.domain.user.55: Failed to bootstrap path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
   Jan 7 11:47:43 com.apple.xpc.launchd.domain.user.202: Could not read path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
   Jan 7 11:47:43 com.apple.xpc.launchd.domain.user.202: Failed to bootstrap path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
   Jan 7 11:47:58 com.apple.xpc.launchd.domain.user.89: Could not read path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
   Jan 7 11:47:58 com.apple.xpc.launchd.domain.user.89: Failed to bootstrap path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
   Jan 7 11:48:38 jnl: disk2s3: replay_journal: from: 50180096 to: 50778112 (joffset 0x3a3c000)
   Jan 7 11:48:39 jnl: disk2s3: journal replay done.
   Jan 7 11:49:37 com.logmein.LMILaunchAgentFixer: Service setup event to handle failure and will not launch until it fires.
   Jan 7 11:49:39 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.319: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
   Jan 7 11:49:39 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.319: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
   Jan 7 11:49:39 com.citrix.ServiceRecords: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.citrix.Beacons
   Jan 7 11:51:29 process iPhoto[248] thread 2450 caught burning CPU! It used more than 50% CPU (Actual recent usage: 52%) over 180 seconds. thread lifetime cpu usage 90.109268 seconds, (87.476202 user, 2.633066 system) ledger info: balance: 90008641218 credit: 90014455352 debit: 5814134 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 172082865204
   Jan 7 11:52:49 com.apple.xpc.launchd.domain.user.99: Could not read path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
   Jan 7 11:52:49 com.apple.xpc.launchd.domain.user.99: Failed to bootstrap path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
   Jan 7 12:07:36 process iPhoto[490] thread 12067 caught burning CPU! It used more than 50% CPU (Actual recent usage: 93%) over 180 seconds. thread lifetime cpu usage 90.200179 seconds, (88.682346 user, 1.517833 system) ledger info: balance: 90012025000 credit: 90016246356 debit: 4221356 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 96436947650
   Jan 7 12:19:32 com.apple.xpc.launchd.domain.pid.quicklookd.536: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. app
   Jan 7 12:21:38 process WindowServer[134] caught causing excessive wakeups. Observed wakeups rate (per sec): 174; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 130324
   Jan 7 12:24:23 process Image Capture Ex[494] caught causing excessive wakeups. Observed wakeups rate (per sec): 1570; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45166
   Jan 7 12:28:45 process iPhoto[643] thread 21591 caught burning CPU! It used more than 50% CPU (Actual recent usage: 90%) over 180 seconds. thread lifetime cpu usage 90.114637 seconds, (88.373536 user, 1.741101 system) ledger info: balance: 90002127665 credit: 90005648813 debit: 3521148 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 99086317519
   Jan 7 12:30:17 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.655: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
   Jan 7 12:30:17 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.655: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
   Jan 7 13:13:15 process com.apple.WebKit[827] caught causing excessive wakeups. Observed wakeups rate (per sec): 560; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 55866
   Jan 7 20:09:33 process iPhoto[643] caught causing excessive wakeups. Observed wakeups rate (per sec): 198; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 269536
   Jan 8 01:12:04 AppleUSBMultitouchDriver::validateChecksum - 512-byte packet checksum is incorrect (expected 0xf60c, checksum bytes were 0xdead)
   Jan 8 15:06:18 com.apple.xpc.launchd.domain.pid.quicklookd.1302: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. app
Memory: iPhoto (UID 501) is using 2093 MB
kexts
   com.logmein.driver.LogMeInSoundDriver (4.1.46f67)
Daemons
   com.adobe.fpsaud
   com.apple.installer.osmessagetracing
   com.logmein.raupdate
   com.macpaw.CleanMyMac2.Agent
   com.sharpcast.xfsmond
Agents
   com.adobe.ARM.UUID
   com.apple.AirPortBaseStationAgent
   com.apple.photostream-agent
   com.citrix.AuthManager_Mac
   com.citrix.ReceiverHelper
   com.citrix.ServiceRecords
   com.google.keystone.user.agent
   com.logmein.LMILaunchAgentFixer
Startup items
   /Library/StartupItems/ProTec6b/DemoOver
   /Library/StartupItems/ProTec6b/Nalpeirond6b
   /Library/StartupItems/ProTec6b/ProTec6b
   /Library/StartupItems/ProTec6b/StartupParameters.plist
dylibs
   /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/WebKit.dylib
   /Users/USER/Library/Application Support/Google/Chrome/WidevineCDM/1.4.6.703/_platform_specific/mac_x64/libwidev inecdm.dylib
   /usr/lib/HDREfexProFC.dylib
App extensions
   com.getdropbox.dropbox.garcon
Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist
   - mod date: Jun 7 11:58:25 2013
   - checksum: 1591517921
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>ServiceIPC</key>
    <true/>
    <key>MachServices</key>
    <dict>
    <key>com.citrix.AuthManager_Mac</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.citrix.AuthManager_Mac</string>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
    </array>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Disabled</key>
    <false/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist
   - mod date: Jun 7 11:58:25 2013
   - checksum: 676087606
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.citrix.ReceiverHelper</string>
    <key>RunAtLoad</key>
    <true/>
    <key>KeepAlive</key>
    <dict>
    <key>SuccessfulExit</key>
    <false/>
    </dict>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
    </array>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Disabled</key>
    <false/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist
   - mod date: Jun 7 11:58:25 2013
   - checksum: 1445213025
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>ServiceIPC</key>
    <true/>
    <key>MachServices</key>
    <dict>
    <key>com.citrix.Beacons</key>
    <true/>
    <key>com.citrix.ServiceRecords</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.citrix.ServiceRecords</string>
    <key>RunAtLoad</key>
    <true/>
    <key>KeepAlive</key>
    <true/>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
    </array>
   ...and 8 more line(s)
Contents of /Library/LaunchAgents/com.logmein.LMILaunchAgentFixer.plist
   - mod date: Nov 10 20:47:41 2014
   - checksum: 94065829
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Debug</key>
    <true/>
    <key>Label</key>
    <string>com.logmein.LMILaunchAgentFixer</string>
    <key>OnDemand</key>
    <true/>
    <key>ThrottleInterval</key>
    <integer>1</integer>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/LogMeIn/bin/LMILaunchAgentFixer.app/Contents/MacOS/LMILaunchAgentFixer< /string>
    <string>fromlaunchagent</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.logmein.logmeingui.plist
   - mod date: Jan 7 12:05:30 2015
   - checksum: 849719711
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Debug</key>
    <true/>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.logmein.logmeingui</string>
    <key>LimitLoadToSessionType</key>
    <array>
    <string>Aqua</string>
    </array>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/LogMeIn/bin/LogMeInGUI.app/Contents/MacOS/LogMeInGUI</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.logmein.logmeinguiagent.plist
   - mod date: Jan 7 12:05:30 2015
   - checksum: 1227007658
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Debug</key>
    <true/>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.logmein.logmeinguiagent</string>
    <key>LimitLoadToSessionType</key>
    <array>
    <string>Aqua</string>
    </array>
    <key>OnDemand</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/Helpers/LMIGUIAgent.app/Contents/MacOS /LMIGUIAgent</string>
    </array>
    <key>RunAtLoad</key>
    <false/>
    <key>Sockets</key>
    <dict>
    <key>Listeners</key>
   ...and 19 more line(s)
Contents of /Library/LaunchAgents/com.logmein.logmeinguiagentatlogin.plist
   - mod date: Jan 7 12:05:30 2015
   - checksum: 3390435066
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Debug</key>
    <true/>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.logmein.logmeinguiagentatlogin</string>
    <key>LimitLoadToSessionType</key>
    <array>
    <string>LoginWindow</string>
    </array>
    <key>OnDemand</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/Helpers/LMIGUIAgent.app/Contents/MacOS /LMIGUIAgent</string>
    </array>
    <key>RunAtLoad</key>
    <false/>
    <key>Sockets</key>
    <dict>
    <key>Listeners</key>
   ...and 19 more line(s)
Contents of /Library/LaunchDaemons/com.gopro.stereomodestatus.plist
   - mod date: Jan 29 17:22:17 2014
   - checksum: 2319101607
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.gopro.stereomodestatus</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>RunAtLoad</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/GoPro/Tools/StereoModeStatus.app/Contents/MacOS/StereoMod eStatus</string>
    </array>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.logmein.logmeinserver.plist
   - mod date: Jan 7 12:05:30 2015
   - checksum: 1427099528
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Debug</key>
    <true/>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.logmein.logmeinserver</string>
    <key>LegacyTimers</key>
    <true/>
    <key>OnDemand</key>
    <false/>
    <key>ProcessType</key>
    <string>Interactive</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/MacOS/LogMeIn</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StandardErrorPath</key>
    <string>/Library/Logs/LogMeIn/stderr.log</string>
    <key>StandardOutPath</key>
   ...and 7 more line(s)
Contents of /Library/LaunchDaemons/com.logmein.raupdate.plist
   - mod date: Nov 10 20:46:56 2014
   - checksum: 3493110929
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.logmein.raupdate</string>
    <key>OnDemand</key>
    <true/>
    <key>RunAtLoad</key>
    <false/>
    <key>KeepAlive</key>
    <false/>
    <key>LaunchOnlyOnce</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/LogMeIn/update/raupdate</string>
    <string>/s</string>
    </array>
    <key>StandardErrorPath</key>
    <string>/Library/Logs/LogMeIn/stderr.log</string>
    <key>StandardOutPath</key>
    <string>/Library/Logs/LogMeIn/stdout.log</string>
    <key>WorkingDirectory</key>
    <string>/Library/Application Support/LogMeIn/bin/</string>
   ...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist
   - mod date: Sep 1 15:15:35 2014
   - checksum: 2214847194
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.macpaw.CleanMyMac2.Agent</string>
    <key>MachServices</key>
    <dict>
    <key>com.macpaw.CleanMyMac2.Agent</key>
    <true/>
    </dict>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/PrivilegedHelperTools/com.macpaw.CleanMyMac2.Agent</string>
    </array>
    <key>ServiceIPC</key>
    <true/>
    <key>Sockets</key>
    <dict>
    <key>MasterSocket</key>
    <dict>
    <key>SockFamily</key>
    <string>Unix</string>
    <key>SockPathMode</key>
    <integer>438</integer>
   ...and 8 more line(s)
Contents of /Library/LaunchDaemons/com.sharpcast.xfsmond.plist
   - mod date: May 4 20:28:27 2013
   - checksum: 3377386094
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//ENhttp://www.apple.com/DTDs/PropertyList-1.0.dtd">
   
   <plist version="1.0">
   <dict>
    <key>Disabled</key>
    <false/>
    <key>Label</key>
    <string>com.sharpcast.xfsmond</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/SugarSync/scxfsmond</string>
    <string>-log</string>
    <string>error</string>
    <string>-launchd</string>
    </array>
    <key>Sockets</key>
    <dict>
    <key>Listeners</key>
    <dict>
    <key>SockFamily</key>
    <string>Unix</string>
    <key>SockPathMode</key>
    <integer>438</integer>
    <key>SockPathName</key>
   ...and 14 more line(s)
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
   - mod date: Jul 24 11:11:09 2013
   - checksum: 394026997
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
    <string>semi-auto</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.google.keystone.agent.plist
   - mod date: Nov 30 14:26:35 2014
   - checksum: 4084537214
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.google.keystone.user.agent</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>ProgramArguments</key>
    <array>
     <string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
     <string>-runMode</string>
     <string>ifneeded</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>3523</integer>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
   </dict>
   </plist>
Listeners
   cupsd: ipp
User login items
   Garmin Express Service
   - /Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app
   Dropbox
   - /Applications/Dropbox.app
   Google Chrome
   - /Applications/Google Chrome.app
   ThisLife Uploader
   - /Applications/ThisLife Uploader.app
   WDQuickView
   - /Library/Application Support/WDSmartWare/WDQuickView.app
Safari extensions
   Evernote Web Clipper
   - com.evernote.safari.clipper
Widgets
   iCal
   Earth
Restricted files: 339
Lockfiles: 101
Elapsed time (s): 844
Wow, that's a lot of data for you to sift through, but I suppose you know what you are looking to find. I bet you earned every one of those points. Thanks, Linc. All the folks in the world waiting for me to share their photos with them thank you as well : ) Cathleen

SCVMM 2012 R2 VM on SMB 3.0 file share cloning is not offloaded and painfully slow

I setup a test environment, it appears the SCVMM always use BITS to clone VM that was painfully slow
SCVMM1: SCVMM 2012 R2 with the latest windows update
VHOST1 and VHOST2: Hyper-V Host. Windows Server 2012 R2 with the latest update
SERVER1: Windows File server, with Windows Server 2012 R2 with the latest update. The storage is a single 512GB SSD.
All VMs are located at a file share on SERVER1, the share is managed by SCVMM1 also.
All computers have plenty of RAM (8G+) and modern processor. The individual I/O benchmark on SERVER1 is typical SSD speed. Each VHOST has dedicated NIC for VM use. Each
server has two gigabit NICs on same switch for data.
The step to reproduce:
1. Create a Windows 7 x86 VM on VHOST1 and install OS on it. The VM is placed on the SERVER1 file share. It runs well. no problem, VM performance is good.
2. In SCVMM console, right clicks the VM and select "Create Clone", the deployment target is on the same SMB share as the source VM.
Actual: It appears SCVMM clone the VM files with BITS, it is painfully slow. All data travel through network. Estimated 30 minutes for 30GB file!
Expected result: SCVMM uses SMB 3.0 to make the copy. The source and destination are on the same SMB 3.0 share. The transfer of data should be offloaded by SERVER1, instead of reading all data then write it back cross network. (And from unknown reason the
BITS is even much slower than network file copy).
Did I miss anything? Any way to force SCVMM to do such offload copy? Any help would be appreciated.

Hi acacac1,
>>Actual: It appears SCVMM clone the VM files with BITS, it is painfully slow. All data travel through network. Estimated 30 minutes for 30GB file!
Did you try to disable BITS then clone the VM again for test ?
Any further information please feel free to let us know .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Macbook upload speed suddenly slow see history

Hey there,
So my wife has the white Macbook from september 2008 and I have the Macbook Pro 15in from March 2009. We both share the same internet connection but after the upgrade to SL her upload speed has become painfully slow (see history) while mine is still the same speed.
Date Download Speed Upload Speed
Tuesday 00:55 984 kbps (123kB/s) 27 kbps (3.38kB/s) Share
Tuesday 00:06 989 kbps (124kB/s) 19 kbps (2.38kB/s) Share
Sep 4, 22:01 1059 kbps (132kB/s) 120 kbps (15kB/s) Share
The september 4th speedtest was BEFORE the SL upgrade and the tuesday is AFTER the SL upgrade, but then again I upgraded my Macbook Pro to SL and there has been no drop in my upload speed.
What to do? My wife is now using my Mac which is no good for any of us.
Thanks
Thomas

Select each of the items shown in RED in Activity Monitor. Click on the Quit icon in AM's toolbar then click on the Force Quit button. You only need to do this if you are unable to quit the programs in the normal way - Make the program the frontmost application, then press COMMAND-Q.
You also have two items in the /Library/StartupItems/ folder. They should not be there. You can remove them. HP should have updated software that replaces the older driver. I'm not sure about the TiVo item, but it should not be installed in that location.
You should check the Classroom Enrichment application for compatibility with Yosemite: See App Compatibility Table - RoaringApps.
As for your backup needs I would suggest this:
Repartition the Seagate backup drive. This removes all the Seagate software. If you want more control over your backups than provided by Time Machine see the following options:
Suggested Backup Software
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Others may be found at MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. You can download free trial versions of all six so you can try them out and decide on the one you prefer before paying for it. I am a big fan of Carbon Copy Cloner, but that does not mean it's your best choice.
Now given all the above consider that you can always use Time Machine. But until you get your computer straightened out I would refrain from making a backup. There's no point in restoring a malfunctioning backup made of a malfunctioning computer.

Web page browsing speed drastically slowing down

I purchased a 13 inch mac book pro in December. Since day one, I have had a problem with my web page browsing speed drastically slowing down. These crippling slow down periods are completely random. They can start any time, and last from any amount of time. from minutes to hours.
95% of the time any attempt to load a page end in a time out. The other 5% takes no less then 90 seconds to load the simplest of pages. I have this problem no matter what browser I use (Firefox, Chrome, Safari, Opera). What is driving me nuts is other applications work fine when browsing slows down. Skype, IM clients, multi-player games all work great, but web pages will not load. When I ping a website, my latency returns are perfectly normal. I can use Telnet and SSH with no problem.
This has become such a problem that I can not depend on using OS X day to day. I used boot camp to setup a windows partition and installed win 7. Using my win 7 install everything runs perfectly, I have had zero slow down!
I've done some searching and found numerous posts with similar problems. Ive read and followed the advice that I found, but I've had no success is fixing this.
I have had this problem on 6 different wireless networks. Each time this problem has come into play, my windows install performs flawlessly. This really makes me belive this is a software problem. Not hardware / ISP.
I see alot of post blaming default ISP DNS servers, just to let everyone know I use google's open DNS on my home network.
I also have changed the DNS settings in OS X
All other machines on my home network have zero problems!
Sending files between my laptop and other machines on my network works perfectly.
I have found a few posts / guides for using OnyX, none of them have worked for me
I have to be missing some simple thing here, any help would be greatly appreciated.
Message was edited by: BinomialHeap

Thank you for the welcome and the quick response Glynn
I rebooted into OS X as soon as I read your response. Web pages would not load.
I followed your instructions.
The Airport Light was green.
I went ahead and hit assist me and ran the diag tool. According to the tool my internet connection is working correctly.
Sadly the problem persists and web pages still will not load in all four browsers.
I ran a ping to google.com and responses were well under 45 ms.
Message was edited by: BinomialHeap

After Effects CS6 running painfully slow

I am working on a composition in Adobe After Effects CS6, and it's running painfully slow. I've tried to mess with some of the settings in the preferences, and lowering the quality of the preview. But I still feel like I'm running terribly slow considering the speed of my computer. Here's what I'm running:
Mac Pro Desktop
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.4 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per core):          256 KB
L3 Cache (per processor):          12 MB
Memory:          24 GB
Processor Interconnect Speed:          5.86 GT/s
Video Card
NVIDIA Quadro FX 4800:
Chipset Model:          NVIDIA Quadro FX 4800
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          1536 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x05fe
Revision ID:          0x00a1
ROM Revision:          3426
Displays:
SyncMaster:
Resolution:          1680 x 1050 @ 60 Hz
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          H9LPA06272
Main Display:          Yes
Mirror:          Off
Online:          Yes
Rotation:          Supported
SyncMaster:
Resolution:          1680 x 1050 @ 60 Hz
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          H9LPA06265
Mirror:          Off
Online:          Yes
Rotation:          Supported
Hard Drive
WDC WD1001FALS-41Y6A0:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          WDC WD1001FALS-41Y6A0
Revision:          05.03D06
Serial Number:               WD-WCATR2482149
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 1
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
MAC OS X:
Capacity:          677.53 GB (677,531,090,944 bytes)
Available:          421.16 GB (421,160,968,192 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
Untitled:
Capacity:          322.33 GB (322,328,068,096 bytes)
Available:          183.98 GB (183,976,169,472 bytes)
Writable:          No
File System:          NTFS
BSD Name:          disk0s3
Mount Point:          /Volumes/Untitled
The composition I'm working with does have 1 camera, and about 45 small 3D comps built into it. No lights. And all of the footage and data is on the Mac OSX hard drive. Which has tons of space available as you can see. I've played around with the settings in After Effects. But nothing seems to significantly speed things up. Any ideas??

Hey PJ,
I've been using CS6 since it was released, and while it's got a bunch of great new features, it's basically made Multi Processing unusable unless we're talking about the simplest of comps.   I'm working on my second short using AE as the total animation package, and render times for complicated 3D comps (NOT using ray tracing) have tripled.   MP used to take forever to spool up, but was fast once it got rolling. Now, disabling MP gives me 3 or 4 times faster rendering, which is still MUCH slower than MP is CS5.5. SOmething has deflineitly changed for the worse, as i'm using the same machine with the same settings and virtually the same comps.
I acutally just yesterday had two animators quit on my because they couldn't meet their deadlines.
I think After Effects is the hydra of programs. They kill one feature and two more fill its place. Unfortuanly we traded functional Multi-processing for falloff lighting and etc... The puppet tool was it 3 version of after effects before it was stable. I'm hoping we don't have to wait til CS7 for MP to sort itself out.
I really don't understand the "deal with it" aspect of the posters here. Surely a functional program that delivers on it's promises is the goal of this forum. We're not asking it to make us a sandwich.

Flash Archive (flarcreate) Painfully Slow

I really like the concept of flar, but flarcreate is just painfully slow.
To the point that I don't want to use it. I could do L0 backups to
tape significantly faster than flash archives. I'm popping off
a flarcreate on my Sun Blade 100 before I do an OE upgrade
and after 2 hours it's still determining the size of the archive.
I'll be the first to complain about the speed of Sun Blade 100's,
particularly for IO, but this is just crazy.
Is there any expectation that a better/faster way is going to be made
avalible? I really would much rather use flar than tape.
Thanks.

That is painfully slow! The longest I've seen the size estimation take is around 10-20 minutes. It's been a while since I've done it though & that was on a 100 as well. I didn't have anything else running on the machine, and it was a base install + patch cluster, with compression my flar archive came out to be about 500 megs. It definately took under 2 hours to create the archive [start to finish]. Maybe you should try this on a different machine & see if it goes faster, or maybe even restart the process.
Now that I'm thinking about it, there was one time where the flar create was actually including the archive files into the archive, such that the archive was 2x-3x it's normal size. The problem was, it was one of the last files to be added to the archive & by then it was a pretty large file. You might want to make sure you're excluding the directory that you're saving the archive to...
HTH,
Daryl

Brush and smudge tools painfully slow in CS5

I use CS5 on quad core 2.26ghz macpro with 32 gb RAM. It's a clean system, both cs5 and os10.6.6 updated. No extra plug-ins or fonts. I do have an extra video card installed for my raid 5 system. Only use photoshop on this computer. Using the healing brush or smudge tool is painfully slow. also moving layers around are slow. I work on 10-15GB files. My assistant works on my old G5 with 8gb of ram and since it's not an intel he's still working in CS2. Using the healing brush on a 4GB file is faster on the G5 in CS2 than on my Quadcore in CS5. What is going on here? how can I speed things up?
I have cache levels set to 7, cache tile sice to 1024.

i have found that any mac pro i use - not all set up the same- if they have a nvidia card after a few hours of working there will be a slowdown of painting, cloning, smudging and screen redraw. I always have open gl off. adobe engineers have been helping now and then but no one has a solution. on the windows forum someone reportedly adjusted their video card settings to fix it. but on a mac we have to option to do that - that i know of. it is a big problem for me when using CS5 that I use CS3 when possible.

Macbook Air internet connection painfully slow with ethernet.....

Hi all
I am currently staying in a serviced apartment and have a Macbook Air that I have had to connect to the in-house LAN through the USB port (someone on here was kind enough to suggest this - I'm a bit of beginner at all this!). The connection is painfully slow (it claims to be connected but pages in safari don't load, iTunes won't load etc.), but the ancient IBM pc on Windows XP conencts through the same at a good speed.
I am also in a wifi environment but my Macbook Air doesn't connect to anything - it keeps timing out (even when it can recognise several unsecured networks). Can anyone advise?
Message was edited by: kaythomson

Mine is slow too! The Charter tech was here for four hours today, redoing the entire building. Every other Mac and PC here are up to speed. The new Mac Pro Octo has never been up to speed. I really don't have time to put hours into what I suspect will be a dead end. Apple needs to look into this and help us out.

Painfully slow startup - any suggestions how to make it faster?

Hi Everyone,
Just thought I'd ask people - my 17" iMac G5 1.9GHz PowerPC with 512MB ram is painfully slow at start-up. Seems to take forever! Does anyone know how I could clear a lot of rubbish from my computer and someone make it faster.
Would anyone recommend a complete re-install - would that improve speed?
Any help appreciated, cheers,
Mark

Mark, you can clear space on your drive and speed it up by moving a lot of sound and video files to a DVD, or even better, to an external; Firewire drive that you can partition and also use as a clone boot disk.
Go through your applications folder and look for stuff that you never use, then get AppZapper to remove all traces of them. You can also use Monolingual to remove the tons of extra languages installed with Word and OS X, just make sure you uncheck English and any other language you might use.
Hope some of this helps,
Miriam

Response Speed painfully slow

Similar Messages

Maybe you are looking for