Responses showing over feedback in sequence question - Captivate 5

Hi all
I have an issue with the sequence question type. If you have feedback, the draggable responses show over the top.  Please see grab.
Is this a bug? I can't find any mention of it. It only seems to do it with certain responses. Makes it completely unusable.
Suggestions?
Mitch

This tends to happen if you add answer options AFTER creating the question and adding the feedback captions.  The last thing added ends up on the upper layers of the quiz question slide, but since you cannot see these layers in the timeline, as you can for other slides, you cannot reorder the layers by normal means.
The solution is to turn your feedback captions off and then on again so that they then end up on the higher layers again.
Go to Quiz Properties for this slide and deselect/select the Correct and Incomplete captions to put them above the answer options.  Then set Failure level to NONE and back to whatever it was before to set the Failure caption above everything else.  This will erase any text you had in the captions, so if you've invested quite a lot of time adding text to these feedback captions, it's a good idea to copy that text somewhere else first, so that you can just paste it back in after recycling them.

Similar Messages

  • Sequence Questions - Captivate 5

    I like using Sequence-type questions, but upon user review of the quiz, not all the answers appear.  Only the first two correct answers are shown.  If I have the user arrange five items in the correct order, only the first two correct responses are given in the quiz review.  I have carefully scrutinized all the setup parameters for this question type and don't appear to be doing anything wrong.
    Any suggestions would be appreciated?

    I've had a few issues with Sequence questions that were migrated from Cp4 to Cp5.  I usually found it best to just recreate the questions entirely in Cp5 to get everything working properly.

  • Drop Down Options in Captivate 6 Sequence Question

    Hello!
    I'm working on a project using Captivate 6. There is a Sequence question using the drop down option for Answer Type. For this particular question there are 5 items that need to be placed in order. When a learner clicks the drop down to answer the question only 4 of the 5 options display forcing the learner to scroll to see the last option. Is there a way to make the drop down display larger so the learner doesn't have to scroll?
    Thanks in advance for your advice.
    Marie

    Thanks Lilybiri!
    This was helpful. My team decided to stick with the drop down format, but by making the font size smaller we were able to fit all 5 options into the window (taking away the need to scroll.
    Thanks again,
    Marie

  • Importing projects / sequences question

    I started out my project with the wrong resolution (*sigh*) and I'm now trying to save the day by doing the recommended move - starting a new project with correct settings and importing the original project there.
    But I'm only getting the entire original project sequence as a big block, with no edits or anything available. Is it supposed to be like that? Or is there a way to get all the separate clips, cuts, edits etc when importing?
    Thanks for any help!

    You will also find links to many
    free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Ical all day events show over 2 days during standard time (Nov-Apr)

    Any all day event (either a holiday or an event I have repeating every year like a birthday) I have on my calender during standard time (from November to April) shows over a two day period.
    For example, Christmas Eve shows up on Dec. 23 and 24.
    I have tried syncing with time zone support on and off. I have tried using the same time zone in a different hemisphere. I had this problem last year and again this year. Once we switch to daylight savings the event show correctly.
    Any suggestions?

    Thanks for the link--seems I'll just have to deal with the Palm/iCal calendaring anomalies. Do these "representation disconnects" have anything to do with the weird behavior of my iCal calendars, now that I've synced my palm data to iCal? Immediately after the original Palm/iCal sync, the calendars came up in iCal with no problem. Once I quit iCal, however, and then re-opened it, the list of calendars had disappeared from the "Calendars" pane to the left of the grid, and all of the events had disappeared as well.
    As someone reported elsewhere in this forum, changing the viewing mode (day, week or month) causes the events themselves to reappear, but the "Calendars" pane remains blank.
    I had hoped to ditch palm desktop and streamline my calendar /contact--computer/iPhone syncing, but iCal's odd behavior is making me question whether or not it is stable enough to fully rely on.
    Is there anything that will make the calendars and events perform more reliably?
    G5-Dual 2.5 GHz Mac OS X (10.4.10)

  • Fill In The Blank / Sequence Questions

    Is it possible to have a fill in the blank question in captivate (4 or 5) that is scored according to how many options the user got correct?
    For example:
    If you use 4 grams of 'b' you will need _____ grams of 'x', _____ grams of 'y' and ____ grams of 'z' to complete the forumula.
    In this example if they answered all 3 blanks correctly they would get 3 points, 2 correct answers would give them 2 points and so on.
    Also, is it possible to  score sequence questions according to how many items were correctly sequenced?

    Hello,
    For the moment partial scoring (as I'm calling it) is not possible in Captivate, at least not in the included Question slides. If you want that feature, and you are certainly not alone, please fill in a Feature Request to get this feature on the priority list of the Adobe team.
    If you do not mind the work, it is possible to create question slides yourself using the available objects, user variables and advanced actions. I wrote several articles and blogged about those workarounds, one of them is about creating question slides with possibility for partial scoring (it is not a FIB-question but the principles are the same):
    Question slide with partial score
    Lilybiri

  • On start up my mac is showing a folder and flashing question mark sign?

    On start up my mac shows a folder sign & flashing question mark?? Help and Why??

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by:
    Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    Boot drive's directory has been corrupted - Repair with Disk Utility.
    Critical system files are damaged or deleted - Reinstall OS X.
    The disk drive is physically non-functional - Replace the hard drive.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
    Boot From The Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Sequencing Question Review

    Hi all,
    Just a quick question regarding the sequencing question type
    - is there a way to format the review area to show the correct
    answer for a sequenciung question? In some of my courses, I have
    used the sequencing quetion type, but it leaves quite a bit to be
    disired when it comes to reviewing the correct answer once you've
    completed the quiz. It seems to cram all of the answers into a tiny
    little space, regardless of how big I make the Review Area when
    editing the screen.
    Any ideas?
    Thanks in advance!
    Cheers,
    Shawn

    I agree the space is very small for the review. It also helps
    to only have a sequence of four and that may be too small as well.
    The only other suggestion I can make is put the order of the
    correct answer into a Success Caption or the Failure Caption or
    even BOTH. You may not be able to put all of the answer in the
    captions but they can expand a lot. You can at least put the
    correct order of the letters.
    Jeff

  • Sequence Questions Merging

    Hi
    I recently created an assessment on Captivate 3, which
    includes a number of sequence questions, the problem that I have is
    that the answers for the sequence questions are moving between
    questions and therefore people are answering it wrong as not all of
    the correct options are available.
    Any ideas on how to resolve this??
    Thanks

    Try separating the "Sequence" questions from one another with
    a different type of questions, i.e.
    1. sequence
    2. t/f
    3. sequence
    4. mult choice
    5. sequence
    This is definitely a bug, i've seen the same thing. --Bob

  • I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

  • I have an iPhone 4S that is a replacement of a defective 4s and it shows over 3Gb of data backed up in the cloud from my old 4s. How can I find out what is in this backup? It is preventing me from backing up my new 4s to the cloud due to the amt of data.

    I have an iPhone 4S that is a replacement of a defective 4s. When I activated the newer phone, I believe I transferred over everything except pictures (had multiple failures trying to backup and restore). Now the phone shows over 3Gb of data backed up in the cloud from my old 4s. How can I find out what is in this backup? It is preventing me from backing up my new 4s to the cloud due to the amt of data. It may be duplicated info that I don't need or I may want to archive the backup or parts of it like pictures.

    You can not access the backup directly.
    Did you restore your replacement from this backup?
    If so then you already have everything in the backup on your device.
    If not, you can wipe the device and restore from this backup:
    Settings > General > Reset > Erase All Content & Settings
    What is it you are worried about losing that isn't already on your current device?

  • Attachments in mail show up as squares with question marks

    When I open the Mail program and the email has an attachment the attachment shows up as squares with question marks.  Any help would be appreciated.  Thanks

    Take your screenshot, then reply to this message and click the camera icon in the editing window. Click the "Choose File" button and select the screenshot. If you don't know how to take a screenshot, search for that term in the built-in help.

  • I opened iTunes and the cloud is not syncing up, so i cannot watch movies or tv shows over the cloud, however it was there a few days ago, now randomly gone.

    I opened iTunes and the cloud is not syncing up, so i cannot watch movies or tv shows over the cloud through itunes, however it was there a few days ago, now randomly gone.

    Are you sure you bought and not rented them?  Renting lets you to access the video for up to 48 hours.

  • My computer does not start . It shows an envelope with a question mark.  Can anyone tell me what to do?

    My computer does not start  I turn it on and it shows an envelope with a question mark.
    Can anyone tell me how to fix it.

    Troubleshooting: My computer won't turn on
    Mac doesn't boot

  • TS2094 After resetting the pram, the screen only shows a folder with a question mark inside.  What does this mean?

    I followed the initial steps in this post and reset pram.  After restarting, the screen just shows a folder with a question mark.  What does this mean?

    Thanks Niel, I tried using Option and nothing happened so I next tried inserting the Leopard disc and rebooting while holding C.  Nothing happened until the disc was ejected and then the folder with question mark reappeared.  I inserted the disc again and at this point and it booted OSX.  I tried to acess disc utility to repair but my harddrive wasn't listed, only the CD drive and the OS disc.  Does this mean I'm lost everything?

Maybe you are looking for