Resports not seen in the history Tab of Bex.

Dear All,
I am using BI7. I do not see the reports in the history Tab of bex analyser. How do i enable this. Is there any other setting which i need to do. PLease let me know.
Regards
Nilesh Awaghan

Dear Sumit,
Thankyou for you information. I executed the said transaction and i can now see the reports in my History folder.
Thanks again for your information. Full points awarded.
Regards
Nilesh

Similar Messages

  • How do I check internet usage history? When i use the "History" tab on the tool bar all I see is today's activity & the calendar does not change when I click on it. Thanks

    How do I check internet usage history? When i use the "History" tab on the tool bar all I see is today's activity & the calendar does not change when I click on it. Thanks

    zedzed,
    Here's another thought.
    Navigate to HD > Users > Library > Safari: Make a duplicate of History.plist.
    To duplicate the file, click once to highlight it. Press the Command + D keys.
    Drag the History,plist copy file to the Desktop.
    Highlight it. Press the Command + I keys, to get info.
    Change Open With to TextEdit.
    When you open the file in TextEdit, it will be difficult to read, but you will be able to pick out some sites.
    ali b

  • Document not seen in the SOLAR02

    Hi All,
    I am not able to find the document in the Test cases tab of a particular Business process, but when I tried to find it using FIND DOCUMNET option I am able to see the document and open the same in Read only mode and when I click on the where used list, it says NO USAGE OF DOCUMNT FOUND.
    The same document is shown as ADDED in the history tab of the particular business process-> Test Cases tab-> HIstory. But still I could not find in the Test cases tab when I check.
    Pls help with your points.
    Regards,
    Bharathi.

    Bharathi,
    This is a very common problem with solution manager ....that if you delete the document using "-" or MINUS sign in solar01/soalr02 then it is not deleted
    rather it is removed from ur Project ...so if you have to delete the document then use the DELETE button shown there
    Secondly the reason why u can find it is ......that it is removed using the MINUS button and not deleted means it is available in knowledge warehouse but it is not assigned to ur project...
    Remember KW has all the documents whether it is assigned to any project or not .
    So u cn see and it gives u NO USAGE OF DOCUMNT FOUND msgg
    Therefore to delete the documents use the Delete button as I have mentioned.
    Hope it is solved now.
    Regards
    Prakhar

  • Data from the History tab in Service Manager

    Hello,
    I would like to use data from the History tab in Incidents in a report. I do not see the data anywhere in the DWDataMart. If it does not exist there is there a management pack that can create tables and views for this data in the DWDataMart?
    Thank you!

    Hi,
    Here is the good article that may be able to help you:
    http://www.concurrency.com/blog/service-manager-useful-queries-entity-change-log/
    Remy BOVI

  • How to disable the list of websites viewed under the history tab ..?

    How to disable the list of websites viewed under the history tab..?
    I want to remember the history of websites viewed but I do not want to appear under the history when I open a new website. I can see that only 15 websites can be viewed under the history tab
    Please do the needful at the earliest
    Thanks & Regards
    Srinivas

    srinivsd,
    Thanks for getting in touch with Mozilla Support! If you want to '''COMPLETELY''' disable your browsing history, take a look at https://support.mozilla.org/en-US/kb/settings-privacy-browsing-history-do-not-track#w_never-remember-history. That will allow you to disable history tracking in Firefox.
    However, if this is not what you were asking, please let me know and I will assist you further.
    Thanks!

  • Why do my 3rd party loops not appear in the "Loop" tab?

    I have saved some Magix wav loops into the local apple users directory of Logic Express and though I can find them using the media browser they do not appear in the loops tab listing.
    Does anybody know the cure for this?

    If you drag your .wav loops into the arrange area do they function properly?  If not, you may need to convert them using Apple Loops Utility.  After doing that you can drag the folder with the .aiff conversions onto your loops tab to import them.
    You might find this old thread useful:
    http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=37200

  • Is there a way to view the web history after it's been cleared from the history tab?

    Is there a way to view the web history after it's been cleared from the history tab?

    Yes.

  • BB Passport: After upgrading to 10.3.1, the USB key are not seen by the OS

    Blackberry Passport:
    After upgrading to 10.3.1 Any kind of USB key is not seen by the OS, even after restarting the operating system.
    With original OS 10.3 could connect USB key to transfer my photos with file manager.
    Any suggestions?

    There a lot of issues being discovered by users doing the upgrade OTA or using Link. And they are varied. It's had to say whether your problem another of these issues or something else. Those I trust are recommending a clean OS install using an autoloader as so far there are not the same problems afterward.
    You could try the autoloader route. Do a backup first. After the clean OS install, test before you do a restore and install app. If problem is gone, then you know the clean OS works. The next question will be if the problem returns when you restore or add apps.
    - Ira

  • Why the menu to move from one page to another is not seen when the page is online?

    On my web, I have different pages like 'Homepage' or 'Contact' but when I publish my web I can not see the menu.
    why the menu to move from one page to another is not seen when the page is online?
    Thank you,
    Roger.

    Where are you publishing and how are you uploading the files?

  • Can i get the history tab in query designer in bw 3.5 version

    can i get the history tab in query designer in bw 3.5 version plz help me.

    Hi,
    yes..
    do this..
    Go to SPRO->IMG->SAP NEtweaver->SAP BIW->Reprting-relevant Settings->General Reporting Settings in BEx->Activate personalization in Bex.
    Regards,
    San!

  • When a pdf file is opened in a tab, the automatic scroll function from the pad does not work in the other tabs, but only for the particular PDF tab.

    The scroll function from the pad/mouse does not work for the other tabs when a PDF file is opened.

    Hi NSHS,
    Have you checked to see if your PDF add-on is up to date? You should take a look at the [[Opening PDF files within Firefox]] Knowledge Base article. There is a lot of good information in there. You should try both of the suggested PDF add-ons to see if that fixes the issue.
    Hopefully this helps!

  • HT1925 I was trying to make sure that all my Apple software was uninstalled, and I still can't remove C:\Program Files\iPod\.  I went to the Task Manager and it is not listed in the Processes tab.  What do I do now?

    I was trying to make sure that all my Apple software was uninstalled, and I still can't remove C:\Program Files\iPod\.  I went to the Task Manager and it is not listed in the Processes tab.  What do I do now?

    Are you looking for iPodService.exe?
    Might be better to run services.msc from the run dialog and shut down the service polietly.
    tt2

  • Decimals not seen in the query...

    Hi Guys,
    I have a problem with the query..
    I have loaded a KF with 2 decimal places in the cube.
    But when I run a query created on the cube, the digits after the decimal place are not seen in the query.
    For e.g.  the value of the KF in the cube is 9.85...but in the query, it is seen as 9
    please let me know where do i need to make the changes.
    FYI..the unit of the KF is %. Has this got anything to do with the problem ?
    thanks in advance,
    Punkuj...

    Hi Aby,
    Sorry, i just missed to mention this imp point :
    I had done the operation that you have suggested :
    I am getting the following output :
    In the Cube : 9.85
    in the query ( after the decimal selection) : 9.00
    I hope that clears my problem..
    Thanks..
    Punkuj

  • Driver does not appear in the selection tab Windows8

    NDIS protocol driver does not appear in the Selection Tab and hence I can not run any tests on it. The client operating system is Windows 8 64bit Pro Premium. I tried reinstall driver several times, reboot client and studio machines, but with no results.
    Client itself is connected to the studio and is in "Ready" state.
    There was no problem running the test on the same driver with Win7 64bit client OS.
    HCK version is 8.59.29854
    The driver is build with DDK7.1.0
    Any hints on how to debug this would be helpful.
    Dmitry

    Have you uninstalled and re-install the HCK client on the test system?  This can cause the entry on the controller to not match up with the actual client system.  If this is the case, and you have done no testing on the system (as all results will
    be lost), please try this:
    1) Uninstall the DTM client from the test system.
    2) Delete the client entry from HCK studio in the machine management section.
    3) Reinstall the DTM client on the test system.
    4) Wait for client entry appear in the "Default Pool"
    5) Change client status to "Reset", wait for it to become "Ready", and try locating the target as I describe above.
    Paul - This posting is provided "AS IS" with no warranties, and confers no rights.

  • I have a MacBook Pro. When I go to system preference, the external speakers option does not appear in the Input tab. Help?

    I have a MacBook Pro. When I go to system preferences, the external speakers option does not appear on the input tab and, of course, the external speakers do not work. Help?

    When you plug headphones in, or external speakers, where it states "internal speakers", it will rename that "headphones", say. Unless you are running an external sound card.

Maybe you are looking for

  • Photo imported into ID is not as black as surrounging black

    Hello all. Using CS5.  In creating a document in ID, an image that has been done in Photoshop with strong black backgrounds is imported into ID using File > Place.  In ID, there are two black panels on each side of the photo.  On screen it looks fine

  • Workflow email PDF attachment

    All, I'm using the following code in a zprogram/FM that will be called in a method to create an attachment to the workflow and then send the attachment through mail. But this is not working. 1) I trigger the wf thru idoc posting - works fine 2) The i

  • How to convert Localized formatted String in Amount?

    Hello All, I have once scenario where I need to convert localized string amount to parse and make it long amount. Example: In russia, people write 1000 as "1 000". Now what I need to do is to parse this "1 000" and get 1000. Is there any way in java,

  • Business Rules Run Very Slow

    For our planning forms we use to have a Calc Script run on save - since we did not yet use business rules we would specificy all children of a certain member in the calc script so it would run multiple members thorugh the calc script. We thought BR w

  • EStore and Google docs

    I am about four days into owning the C510 eStation. In the print app center, there is an app promoted for eDocs, which looks great!  I can link to a page that even shows how documents would look! The problem is that there does not appear to be any wa