Restart and login issue

My macbook is running Mac OS X 10.7.1 (LION).
Everytime I try to restart Mac OS and load until the login page, I try to enter the password. Once I key in the first few character, the system hang and the spinning ball will keep spinning non stop.
May I know what is the problem?

This sounds almost identical to the issue I've been ripping my hair out over for the last week (and so far you're the only other similar report I could find). Basically, ML frequently (but not always) fails to get to the login screen. The apple logo + spinnin cursor complete, but then I'm left with a blank, gray screen with a moveable (but useless) cursor.
I've tried reinstalling multiple times (clean, different partition / disk, updating previous 10.7 system, over virgin 10.7 system) to no avail. I've also tried the following with no luck:
- Disk Utility repair permissions & repair disk
- PRAM reset
- SMC reset
- Unplugging all USB & firewire devices except keyboard & mouse
- Replacing GTX-285 graphics card with stock GT-120
- Removing all other PCI cards
- Swapped monitor input from DVI-D to DVI-I, used different cable
I captured logs of a successful and failed boot, and the biggest difference I can spot is that while the Window Server seems to be adding + removing the monitor multiple times, on the failure the last entry is a disconnect:
7/31/12 9:16:06.058 AM WindowServer[117]: Received display connect changed for display 0x28d9b380
Whereas on login success, the last WindowServer log message is one that seems repeated multiple times previously:
7/31/12 9:44:10.924 AM WindowServer[102]: Display 0x28d9b380: MappedDisplay Unit 0; ColorProfile { 2, "LCD2490WUXi"}; TransferFormula (1.000000, 1.000000, 1.000000)
I'm definitely thinking it's something to do with the display (which functions perfectly fine under Lion), but can't think what it would be. It's an NEC 2490WUXi, and I'm connecting via a single DVI output on the graphics card (either GTX-285 or GT-120).
What display / graphics card combo are you using?

Similar Messages

Ovi Download and Login Issue

"Ovi Download and Login Issue" i have nokia 5530xm, I am unable to login through ovi app it says sign in failed check your username and password. And when i browse the web it logs in but when itry to download it take back to main page. Please light on this issue. Thanks for help.
If you like my post or think it was useful then please hit the star button. Thanks :-)

now whenever i plug in my ipod to sync i get an offer to download and install or just download a something for itunes that i am not quite sure what it is.
hmmm. can you post a screenshot of the box containing the offer?
there's instructions on how to do that in the following user tip:
hudgie: Taking screenshots to help with problems

IQ826t Restart and Heating Issue

One thing I definitely do not like the HP's support especially when they will not allow us to buy a 7 Upgrade from Vista nor will they support something (even when I find their glitches and they admit after telling me it was just the OS).. On Repair work, I had to ship it out and this will be my 2-3 time to do repair on this PC in the past 3 years (and I have to wait a week for the repair to be done...)
Besides that, IQ826t, Win 7 Ultimate SP1
All Drivers are up to date with HP website (utilizing Win 7 64 bit drivers and Firmware is up to date). AVG update/scan (no issue - confirmed even rootkit).. Malwarebyte - Scan and no issue
Disk Cleanup, Disk Defragmentation done on a monthly and quarterly schedule
Biggest Issue:
I am getting a crash with Win 7 0x124 Stop Error Message (happens periodically and even after a reboot)
Never had this issue until May and the upgrade to Win 7 was done last year with SP1 update done on March (so it is not an issue with the OS as HP support personnel seems to think... I proved them the issue with Windows Update History, The Bluescreen error code on my error code reader).. This machine under warranty and I had issues with it constant (even in Vista)
They state that it is the OS.. Again, if that was the case, I would think it would happen right away like my Toshiba on SP1 upgrade... That was not the case in the matter. I have a firmware reset (default settings) and the issue persist..
The Error Code relates always HAL.dll or ntoskrnl.exe
One if hardware compatiblity and the other is an OS kernel exe file.. And this usually checking knowledge base relates to hardware failing due to 1) Compatibility (which HP website confirms is not the case) 2) OS corruption (which is not the case checking on safe mode and this happening STILL 3) Heat Issue (which I believe is the issue and was been documented on the Internet
What I am noticing is the unit is extremely HOT (vent is almost burning when it has been off and just turned on).. I wonder if the hardware pieces are literally melting to destruction since I can't just open it up (they state it will void my warranty)
The Symptoms before the Crash (happens any time.. Even right after a power up)
If you are playing audio or video, you will start to hear jitters and sound seems to echo itself .. Video would start to lag and become choppy.. Systems start to slow down and things seem to run very slow.. I have seen the power light on the PC start on but the touchscreen just go black (will not restart sometimes)..
Minor Issues (but could be related)
1) When running PC Hardware Diagnostic, they will come up with an error code in the past and that was warranted for a motherboard replacement (of course, they ship the box to the wrong location and I was in the middle of my wedding so I get to it now).. It was pertaining to PCI Express Status ICH9 PCI Express Root Port where it will generate an error code... Now, running the diagnostic... I will not get any error but PCI Express Root Port 3 & 5 do not show up on the diagnostic... Wouldn't that obvious show something that is a problem when there are 6 ports (which on the previous diagnostic that I can't grab past logs shows that). That is not warranted for a warranty work? Just a note, I got the fail test code (which was intermittent but keep happening and the tech support would not look at previous case.. Port 4 failed and a fatal device code)
2) Blu-Ray player will not run and their answer is that it is your Blu-Ray until they realize that I ran it on 3 different Blu-Ray player standalone, different Blu-Ray, and confirm DVD will work.. They still think it is a software issue until they can't deny my point when it will not read the Blu-Ray no matter what (they took control and confirmed it).. They believe the HP SmartDVD software was failing because of Win 7 and not Vista (even when I downgrade and confirm it works, I stated the software is the issue... Lone and behold, 2 months later they had an update that they refuse to admit I was RIGHT on the matter and done 15 hours of troubleshooting that they were wrong about)
3) Wireless Keyboard and Mouse lost connectivity even if the battery is not low... Just stop typing or omit letters.. This is considering the keyboard is literally in front of the touchscreen
4) Touchscreen is sensitive when it wants to be but won't in other... Constant issues there
This is why I have so much issue with support.. They seem to show that they will do anything to deny the issue.. Heck, I am a computer technian calling on the issue.. It ain't like I didn't troubleshoot on the matter... But they think we are all morons and when I prove them wrong, they will use any excuse to honor warranty... That is why it is amazing..

Look in your Settings > App Manager.
Tap Device Monitor.
Tap the Battery tab.
At the upper right, tap "Since Last Charge" to change to "Last 48 Hours".
What apps or processes are consuming the most battery power?
ALSO, in setting up your new Z30, are you syncing many contacts or calendar data from a connected email account?
Social accounts such as Facebook or Twitter?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

FMIS restarting and memory issue

I have Flash Media Interactive Server 3.5.5 on Windows 2008 server. I developed video chat application (many to many), it's only 1 FMS application with about 50-100 room instances and 1 lobby instance to which all users are connected. There are up to 600 - 700 users at a time which produce about 2000-2500 connections to FMS.
Problem I have is with steady raise of memory usage, which if goes little above 2GB will make FMS unresponsive and it would restart itself after about 1-2hours. To avoid that Im restarting FMS manualy every 3-4 days. Interesting thing I noticed is that if I restart FMS from admin console, used RAM memory won't fall at levels as if it would right after whole Windows server is restarted.
In my Application.xml there are following configs:
<Scope></Scope>
<Distribute numprocs="3">Instances</Distribute>
These are things from logs during FMS unresponsive period or right before it:
master.log
2011-05-21    22:01:11    996    (i)2581223    Core (3592) is no longer active.    -
2011-05-21    22:01:16    996    (i)2581223    Core (1868) is no longer active.    -
admin.log
2011-05-21    22:01:06    2832    (i)2581242    Core (3592) disconnected : _defaultRoot_:_defaultVHost_:::_0.    -
2011-05-21    22:01:09    2832    (i)2581242    Core (1868) disconnected : _defaultRoot_:_defaultVHost_:::_1.    -
edge.log
2011-05-21    14:22:23    840    (e)2661034    Connect failed ( , -1 ) : Connect failed: (10061)    -
2011-05-21    14:23:05    840    (e)2661034    Connect failed ( , -1 ) : Connect failed: (10061)    -
2011-05-21    22:01:06    840    (i)2581250    Edge disconnected from core (3592).    -
2011-05-21    22:01:09    840    (i)2581250    Edge disconnected from core (1868).    -
access.log
session    disconnect    2011-05-21    21:29:06    6632    68.191.113.251    29476    39743    -    -    -    -    200    -
session    disconnect    2011-05-21    21:29:06    6632    72.198.193.1    4759    6837    -    -    -    -    200    -
session    disconnect    2011-05-21    21:29:06    6632    83.70.249.91    11996    14797    -    -    -    -    200    -
session    disconnect    2011-05-21    21:29:06    6632    108.8.209.2    57227    76111    -    -    -    -    200    -
session    disconnect    2011-05-21    21:29:06    6632    212.183.140.17    3073    3595    -    -    -    -    200    -
Please help me with this issue.

Thanks for your answers, I'm replying with delay because I wanted to check these things some more.
When I said 'memory is not less', I meant that total memory in Windows after FMS restart doesn't return to memory levels when Windows is restarted, but I guess that's because of some Windows processes and not connected to FMS.
As for FMS processes, these are the things are notice, few hours after FMS restart I get 1 FMSCore.exe that is around 200-220MB, and 3-4 FMSCore's that are around 40-70MB. Size of that largest FMSCore.exe doesn't go down even when there are much less users connected to FMS. And like I said before, after 3 or more days of running FMS becomes unresponsive, and restarts itself. Right after FMS restart largest FMSCore.exe weights around 70MB but 15mins after it's already 120MB as users connect to video chat application.
As for logs, my core.log files have several lines like:
2011-07-04    03:59:24    3308    (e)2611392    Exception while processing message: Unexpected virtual message from client 6446421578071032403: 93 { # 92 " : t 00 00 00 02     -
2011-07-04    03:59:24    3308    (e)2611029    Bad network data; terminating connection : chunkstream error:message length 12086012 is longerthan max rtmp packet length    -
2011-07-04    03:59:24    3308    (e)2631029    Bad network data; terminating connection : (Adaptor: _defaultRoot_, VHost: _defaultVHost_, IP: 94.4.57.121, App: chatcity/stream, Protocol: rtmp, Client: 6446421578071032403, Handle: 2497053121) : 88 1E & D7 FB / 8D 7 99 CB X ...
2011-07-02    14:09:57    1228    (e)2611363    Server detected a backward timestamp from 7990 to 7985 in file: C:\Program Files (x86)\Adobe\Flash Media Server 3.5\applications\chatcity\streams\_definst_\captured_16627033    -
While edge.log has:
2011-07-04    04:58:56    1384    (e)2661034    Connect failed ( , 8134 ) : Connect failed: (10061)    -
2011-07-02    21:09:05    6864    (e)2661034    Connect failed ( , -1 ) : Connect failed: (10061)    -
And master.log has:
2011-07-04    00:30:27    7128    (i)2581223    Core (6280) is no longer active.    -
2011-07-04    00:30:27    7128    (i)2581223    Core (4352) is no longer active.    -

IP Phone restart and reset issue

Dear All,
Can someone help me here?
Our IP phones are getting resetting and restarting frequently. Details are given below, but its not affecting our active calls.
9:38:38a 14: Name=SEPECC882B0AD77 Load= SCCP45.9-0-3S Last=UCM-closed-TCP
9:38:38a 18: Name=SEPECC882B0AD77 Load= SCCP45.9-0-3S Last=Failback
9:40:10a 10: Name=SEPECC882B0AD77 Load= SCCP45.9-0-3S Last=TCP-timeout
9:41:11a 14: Name=SEPECC882B0AD77 Load= SCCP45.9-0-3S Last=UCM-closed-TCP
9:41:11a 18: Name=SEPECC882B0AD77 Load= SCCP45.9-0-3S Last=Failback
10:09:49a 10: Name=SEPECC882B0AD77 Load= SCCP45.9-0-3S Last=TCP-timeout
10:09:51a 23: Name=SEPECC882B0AD77 Load= SCCP45.9-0-3S Last=Reset-Restart
10:28:00a 10: Name=SEPECC882B0AD77 Load= SCCP45.9-0-3S Last=TCP-timeout
10:28:10a 23: Name=SEPECC882B0AD77 Load= SCCP45.9-0-3S Last=Reset-Restart
App Load ID        jar45sccp.9-0-3TH1-22.sbn
Boot Load ID        tnp65.8-3-1-21a.bin
Version            SCCP45.9-0-3S
CUCM Version        7.1.5
Thanks in advance

Hi Ian,
If you are using third generation phone(7970, 79x1, 79x2, 79x5), then there is no fix for it.
This is what I got latest update.
There are a couple of things that need to be kept in mind:
1.       Phones will unregister from the CUCM and register to the SRST GW
2.       GW will tear down Q.931 backhauling from CUCM and will function as a standalone call agent.
The phones will lose either SCCP or TCP keepalives. TCP keepalives being missed generally trigger SRST much faster than SCCP keepalives being missed.
The phones will register to the GW even if Q.931 backhauling has not been torn down. Hence, there might be a brief period where the phones have registered to the GW but the PRI is still MGCP controlled. In such a case, calls will initially fail. After some time (and this is post the 30 second MGCP KA) the Q.931 backhauling will be torn down (isdn bind-l3 ccm-manager will be removed) and the PRI will function as if it has been configured on an H.323 GW. Here we need to understand that the phones showing "Registering" or "CM Fallback Service Operating" are not indicative of the GW going into SRST. The phones will go into SRST much faster than the Q.931 backhauling being torn down.
The behavior you are seeing is the mechanism for timing out a TCP connection and has nothing to do with the SCCP keepalive itself. Any time the phone sends a TCP packet to the server and does not receive a TCP Ack. The phone will retransmit the packet at decreasing intervals until the session is timed out (phone sends TCP RST) and at that point the phone will failover to the next CCM server or SRST reference.
The SCCP keepalives are sent at regular intervals, based on a value presented to the phone during registration (30 seconds by default). If the phone gets a TCP ack for the keepalive, but no SCCP keepaliveAck from the server then you can get into the situation where the phone unregisters due to keepalive timeout (after 2 or 3 such missed keepaliveAcks).
The former is a network problem, the latter is an application problem where, the network layer of the CCM server is acknowledging that the message was received but the CCM application is not responding.
You will note in your example when the phone registers with the SRST router the sccp Alarmmessage it sends will contain a string like "last=TCP Timeout" or similar.
The 3rd gen phones (7970, 79x1, 79x2, 79x5) are much more aggressive in timing out the TCP session than the 2nd gen phones. What took your 7960 26 seconds to unregister will take a 7965 about 8 seconds.

Iphone randome restarts and warranty issue

hello ,
i got a white iphone 4 as a gift from my uncle in canada and i live in israel , the secound day i got it i went to the cell company to get my micro sim and was ready to kick it with my new iphone
i placed the micro sim where it should be and turned on the phone after it was charging oernight all peachy till it randomly restarted
its the 2nd day i have it on and it keeps randomly rebooting
tried restoring and updating but still having the same problem
if its a hardware defect what can i do ? since the iphone was purchased in another country , does apple provide global warranty ?
thanks in advanced for the help

Apple does NOT provide a global warranty on iPhones. Warranty service is provided only in the country of purchase.
If you've tried the ususal troubleshooting steps (restart, reset, restore from backup, restore as new device) and you're still having the problem, then you'll need to send your iPhone back to your uncle in Canada so he can exchange it.

Verizon call assistant "server down" and login issue

i downloaded the software a month ago & keep getting the server is down message. i was told that the vca app is in the middle of an ungrade and therefore the app wasn't working. i'm still unable to login. am i doing something wrong? do i need to register a new user id and password for vca? i'm assuming the login in is the same as what i use to log into myverizon.com
thanks
Message Edited by ElizabethS on 07-21-2009 06:00 PM

Hi there. You mention that you downloaded the VCA software but are unable to login. My first question is basic - where did you download the software from? Did the link come to you in an email from our business office? The reason I ask is that if you did not receive an email with the link, you might not be correctly registered. If you are not correctly registered, the folks that would handle that are at 866-697-0853. If you are registered, than let me know and we will continue to work.
Thank you!
Brian K
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

IPhone 4 CDMA Restarting and 3G Issues

Well, my iPhone 4 CDMA has recently been restarting randomly. Also, it will lose 3G connection while I am standing in one place. It will search and either find the networkvor I will have to toggle airplane mode. Does anyone have any suggestions?

Who fixed it? If this was not an Apple repair/replacment, then that could answer the question. You can always try and do a restore via iTunes.

IChat 4, Kerberos and login issue

When using Kerberos I can get a ticket for the connection, but after the ticket exchange I get prompted for another authentication request with ID and password.
In the iChat server log I get the entry:
Apr 14 16:47:59 <servername> jabberd/c2s[76194]: GSSAPI Error: Unspecified GSS failure. Minor code may provide more information (Wrong principal in request)
Anybody an idea?

Yes, it is. FQN.
I think a part of the issue is, that we use DNS Service entries.
The machine has "server<xyz>" as DNS name. The chatserver uses the DNS service entry "chat<xyz>" with its own ip. "chat<xyz>" is set in the server admin.app, I added a xmpp/chat<xyz> princial to kerberos and the ticket is issued when I try to connect with ichat.
Usernames used are <username>@chat<xyz>. These usernames work when kerberos is turned of (normal connection to 5223/ssl).
Now, if I turn kerberos on, and leave the ichat server setting in ical client to chat<xyz> and but switch the usernames to <username>@server<xyz> I can log in via Kerberos. (In the case that I add chat<xyz> and server<xyz> to the ichat server Host Domains in server admin.app.
Bit confusing.

ICloud, tabs and login issues

Good morning. I have an iMac, iPad and iPhone. I have an iCloud account which is in use. However, in Mountain Lion on the iMac, when I go to System Preferences, iCloud, it tells me to sign in. When I try and do so, it says I'm already signed in. As far as I know, I only have one iCloud name and password. I therefore do not have an option to show if Safari is on and cannot use iCloud Tabs. My bookmarks also don't want to sync between devices. Where have I gone wrong? Any advice appreciated.

If you can't sign into iCloud.com either, follow the instructions > iCloud: If you can’t sign in to iCloud.com
When you are able to to sign on, on your Mac open System Preferences > iCloud
Make sure Safari is selected.
On your iPad and iPhone, tap Settings > ICloud
Make sure Safari is switched on.

All of a sudden TWO choices for Restart and Shutdown and other issues...

I noticed today that there are now TWO choices in the menu for Restarting and Shutting down for my iMac.
"Restart...
Restart
Shutdown...
Shutdown"
Nothing new has been installed.
Also, now there is a black rectangular outline around anthything that is "selected" on the desktop or in a menu.
My mac mini has also started to act weird all of a sudden. Watching Netflix today, the entire display get s horizontal colored lines and the computer freezes. I have to hold the power switch to turn it off. When trying again, it does the same thing after a few minutes.
Any ideas?
Any help would be appreciated.
Message was edited by: ihans

The imac problems have been solved.
The Voice Over Function in the preferences was turned on somehow. This caused the duplicate restart and shutdown issue, and the black box around highlighted items.
Now If I can figure out the Mac Mini issue. I hope it's not dying on me...
Message was edited by: ihans

Cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.

when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
OS:10.7.2
Macbook Pro 2010-mid 13inch

I also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
I'm also using a Macbook Pro 13-inch mid 2010.

Ipod Touch 5 random restart and wifi connectivity issues

Good day to you sir...
My Ipod Touch 5G 32gb model white has issues towards random restart and wifi unstable even though I have full bars and a working wifi internet connectivity
Here are details that might help on my case..
I bought the Itouch 5 on singapore exactly around January 2013 registered on January 1 on Apple web for warranty.
Around early Feb, i experienced some random restart and I tought it was just some bug after update, it was gone and came back around late march with some wifi issues, but not regularly, only around certain cases on using it for a long period of time. I am still experiencing it now.
The device never experienced drops,dents, nor water damage.. it is protected by an Ozaki case and screen protector bought in a Mac store. Never been Jailbraked. I used it for music, videos and gaming purpose. I have 3 idevice other than the Itouch (iPad 2, Ipad w/ retina display and Ipad Mini with no occuring problems both updated to ios 6.1.3 (so is the itouch). I would like to know what course of action should I take about this problem. I have restored the Ipod Touch 5G via iTunes but the problem still occuring both wifi and random restart. I bought the device on a legit mac authorized dealer. (Power Mac i think) in Singapore, but I live in General Santos City, Philippines. I would gretly appreciate if you give me exact details what course of action should i take.
P.S. my Ipod Touch 5 is running on iOS 6.1.3..

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Fed up with q10 issues from 10.3 restarting and wiping phone

I have been a bberry user for over 7 years and have never been this close to switching OS's
I updated to 10.3 on 10 days ago. All was going well until on the saturday my phone ran out of battery. Normal issue I thought until when i put the charged battery back in (great blackberry extra battery) it reset everything and deleted all my apps and data.
I have since wiped the phone and tried to put some of my data back on to no avail. every time it restarts it it wipes the data off the phone.
I have done a factory reset and tried reinstalling apps without my data and when i power down the phone it wipes everything.
I am very frusterated and need a functional phone.

I have the exact same issue - and I am not even setting up my phone anymore since everytime it just gets wiped anyway!!! I am HATING this at the moment.
Supposed to be using it for work - but you cannot operate like this. It is MORE than annoying.
There was a new update this morning - I installed it and hoped for the best - restarted and yet again - it wiped everything!!!!
How are we to fix this??

After updating to 10.10.3, now my Macbook Pro will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?

After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Restart and login issue

Similar Messages

Maybe you are looking for