Restart and Par deploy

Hi,
do one need to restart the J2EE Engine (on WAS6.20) after the deployment of a .par file?
Thanks
Best regards
Kris

Hi Kris,
No you need not restart the server after deploying the par file. Just create an iView from this par file and view it.
If you make some changes in the project and want to redploy the par file then you have to just rebuild the project after doing the desired changes and create a new par file. Deploy it again and the changes done in this newly deployed file will be reflected in the output.
I hope this solves your problem. If you require some more clarification then please revert back.
Regards
Pravesh
PS: Please consider rewarding points if helpful.

Similar Messages

Strange Problem with PAR deployment.

Hi Everybody,
I am undergoing with the strange problem with PAR deployment. When I am deploying any Par file its going successful but when again If I am changing this same PAR file in NWDS and deploying it ... its deploying but not showing the updated deployment version. To see the updated version, every time, I have to go Portal->System Admin->Support->Admin Console and DELETE the existing PAR file. But this procedure takes too time to work on each and every time. Can you help me with some new concept where the new deployed version will get updated on previous one without any manual process or if this something related to cache problem then how to work out?
Thanks,
Roshan Gupta

Hi,
If it saves you time you can also deploy from here:
.../irj/servlet/prt/portal/prtroot/com.sap.portal.runtime.system.console.ClusterAdminConsole
In some cases (rarely) I observed the behavior you described above.
In thoes cases after deploying the file I click the "clean" button on the bottom, since after the deployment it contains the name of the par you just uploaded it'll save you the time of looking for that par to earase.
After that you have to deploy the par again, but again it's allready in the browse console box.
Best Regards,
Nadav.

Ant tasks for portal's dpadmin and par commands

Has anyone written ant tasks for the dpadmin and par commands? If you look at the shell scripts for dpadmin and par, they are just setting up environment for java method invocation and command-line parsing.

I created some simple targets to deploy my portlets (copy jsp files and classes to appropriate directories) and the declare them with a target that invoked the dpadmin tool on my desktop xml file. I had experimented around with changing the directory priviledges in order to run my build script as a user other than root but had little success. I am sure building a custom ant task wrapped around dpadmin and par commands would be trivial to implement.

I restart and permissions are wrong again...

Hello.
I have downloaded a few widgets, upgraded to firefox 2.0.0.1 and after veifying permissions and repairing them, after i restarting and cheking again, they keep appearing as if i never repaired them.
Is this normal?
This is what keeps appearing after turning the computer on and verifying the permissions again.
I also noticed a slower startup... WHAT CAN I DO TO CORRECT THE PROBLEM??
Verificando permisos de “Macintosh HD”
Determinando los permisos correctos para el archivo.
El grupo difiere en ./Applications/Utilities/Activity Monitor.app/Contents/Resources/pmTool, debería ser 80, el grupo es 0
El grupo difiere en ./Applications/Utilities/Keychain Access.app/Contents/Resources/kcproxy, debería ser 80, el grupo es 0
El grupo difiere en ./Applications/Utilities/ODBC Administrator.app/Contents/Resources/iodbcadmintool, debería ser 80, el grupo es 0
Verificación de permisos completada
Los privilegios se han verificado o reparado en el volumen seleccionado.

I have read the thread and it's a relief that all the permissions change because of intego startup applications. So meanwhile, the computer startup time is slower until apple correct the issue through a patch in apple's utility disc right? Or how may i correct slow startup problem? I only have "antispam engine" and "AdobeResourceSynchronizer" apps at start up.
Thanks for your replies
JDVI

Restart and reboot

what is the difference between restart and reboot ,often confusing...

When you reboot a role instance, the instance is taken offline, the underlying operating system is restarted for that instance, and the instance is brought
back online. Any data that is written to the local disk is persisted across reboots. Any data that is in-memory is lost.
Ref - http://msdn.microsoft.com/en-us/library/azure/gg441298.aspx
In particular to cloud services, - customizations done on the role instances e.g. manually installed software, deployed files (either through RDP or through web deploy) will be lost and the instance will be brought back to the initial state.
Bhushan | http://www.passionatetechie.blogspot.com | http://twitter.com/BhushanGawale

Im in the military and im deployed right now i got a ipod touch but it wont let me down load apps . i put all my billing info in and my address but it keeps telling me to contact the support to complete my transaction

im in the military and im deployed right now i got n ipod touch but it wont let me download apps . i put all my billing info and address in but it keeps telling me that i need to contact the support to complete my transaction

it keeps telling me that i need to contact the support to complete my transaction
Then contact Support.
http://apple.com/support/itunes/contact/

I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

Dear Apple Support, Good day to you. This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1.. After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to resto

Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>

1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working?

My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time?

My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.

I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited. In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items. I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible. I simply deleted that item and now I don't have the situation you described and my wireless is connected. Hope this helps!

Help. I can´t slide to answer when the phone rings, and i´m missing a lot of phone calls! It doesn´t happens all the time but quite enough to be annoying. I´v restarted and updated it. Suggestions? Thanks

Help. I can´t slide to answer when the phone rings, and i´m missing a lot of phone calls! It doesn´t happens all the time but quite enough to be annoying. I´v restarted and updated it. Suggestions? Thanks

When you said you have no fax machines on your line, that does include computers directly connected to the phone line?
The reason that I ask is a computer with a dial-up modem (a non broadband modem) that can connect to your phone line, can have software that makes the computer act as a fax machine.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Imovie won't open on mac. i've restarted and "forced-quit" move. not responding. any suggestions?

iMovie won't respond. I've restarted and "forced-quit" move, but not getting a response. Any suggestions?

Thanks for the suggestions... tried changing resolution and that had no effect, and I've checked my Perian and DivX installations in System Preferences and both say they are completely up to date. I upgraded Quicktime today to 7.5 before all of this became a problem -- but I don't know how to upgrade iLife. In Software Update everything is completely up to date (eg each of the iLife apps).
Oh well, iMovie is not very useful to me anyway -- just somehow annoying that it fails to work. No point flogging a dead horse!!
Any other ideas gratefully received... many thanks in advance

15-minute restarts and hanging finder

Help! I've been trying all the solutions I can find in these and other boards and so far nothing has worked.
Yesterday, while I had several applications open, I right-clicked on an image file to open it with Photoshop and my whole system froze (although the audio for a YouTube video kept playing in the background, even though the picture hung.) Now my system is taking approximately 15 minutes to restart and the finder is hanging for up to 5 or 10 minutes at a time for most mouse clicks.
I'm running 10.6.8 on a Mac Mini. A few days an Excel file corrupted which I think might have been the first sign that something was wrong. Every time I tried to click on the file the whole system would hang.
Here's what I've tried to so far:
Trashed Google Drive (by dragging the application into the trash)
Trashed com.apple.LaunchServices.plist
Trashed com.apple.finder.plist
Repaired permissions multiple times
Booted in safe mode (in which the finder would still hang)
Ran several functions in Spring Cleaning 10 - file checker, launch services rebuilder, permissions fixer, system cache cleaner
Ran a couple of terminal commands that I found in a discussion about freezing finders
The restart sequence goes like this:
Choose restart from menu
The "Are you sure" window comes up but the one minute timer is stalled and it takes several minutes to be able to click on "Restart"
All of the desktop goes away except the background image, which hangs for about two minutes.
There is a chime
The apple screen appears for approximately 2.5 minutes
A blank white screen appears for approximately 2 minutes
A blank blue screen appears for approximately 3 minutes
A blank black screen appears for approximately 2.5 minutes
Another blank blue screen appears for about 1.5 minutes
The desktop background shows up without icons for approximately 1 minute
The desktop icons appear but are not function for another 1.5 minutes or so.
I've tried everything I can think of and desperately need help! I've got a backup from a couple days ago, but my Mac Mini shipped without installation discs, so it's going to be a couple days before I can get a friends in the event that I need to reformat. I'd really like to not have to do that if possible.
Thanks in advance!!!
Leah

leahrc wrote:
my Mac Mini shipped without installation discs, so it's going to be a couple days before I can get a friends in the event that I need to reformat.
The (gray) discs that come with a Mac will only boot that type of Mac, and those built around the same time:
Unless your friend has the same model and build period, you need either a Retail Install disc (you can get one from the online Apple Store for $19.99) at http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard:
Or call AppleCare, give them your Mac's serial number, and they can send a replacement set of original discs (including iLife apps and the Apple Hardware Test for your Mac) for a nominal fee.

Best report to check application and package deployment compliancy?

I am looking for the best report to check application and package deployment compliancy.
Preferably targeting a collection.
tconners

I'm recommending this one:
Software Distribution - Application Monitoring folder -
All application deployments (advanced)
It allows you to select Collections and applications
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

Questions on Iframes and PAR structures

Hi,
I have a few questions on Iframes, JSP's and PAR structure for Portal Application Projects in NWDS.
1. Can I change the source of an iframe from one jsp to another instead of one html to another.
2. My Jsp's are in Portal-Inf/pagelet because whenever I add a new JSP I add a new Portal application object. So how do you refer to the relative path in the calling JSP. e.g <iframe name = "myframe" src ="<relative path>BlankPage.jsp" width="100%">. What would be the relative path. I tried pagelet\jspname.jsp but it does not work.
3. In general how do you type the relative path for objects in a PAR project structure?

Hi Prem,
1.Yes,you can.
2.You dont have to,you can copy and paste as many as Jsp's inside the pagelet.I use beans to customize the BHTML UI properties.So you can make your IFRAME source tag as variable.
<iframe
     id="Nedbrowser"
     name="Nedbrowser"
     style="relative"
     width="<%=myBean.getFrameWidth()%>"
     height="<%=myBean.getFrameHeight()%>"
     frameborder="yes"
     marginheight="0"
     marginwidth="0"
     scrolling="yes"
     src="<%=myBean.getUrl()%>">
</iframe>
Your approach of setting relative path wont work as it is.You have to do something more
1. in JSP you have to use a import statement like
<%@ page import="com.sapportals.portal.prt.resource.IResource" %>
<% IResource rs = componentRequest.getResource(IResource.JSP , "pagelet/BalnkPage.jsp"); %>
and in the IFRAME tag you can do something like this
<iframe
     id="Nedbrowser"
     name="Nedbrowser"
     style="relative"
     width="300"
     height="400"
     frameborder="yes"
     marginheight="0"
     marginwidth="0"
     scrolling="yes"
     src="">
</iframe>
<% Nedbrowser.setSrc(rs.getResourceInformation().getURL(componentRequest)); %>
3.There are so many forum pages on this matter.Just go ahead and search for IResource in SDN.
Goodluck
regards
Senthivel

Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd. Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart. Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows u

Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd.
Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart. Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows up on the desktop where I can then eject it.
I have checked and double checked the finder prefs and all looks normal showing a check mark on CDs,DVDs etc. (the ones I want to show up on the desktop)
I have reset the PEAM, repaired permissions with both the disk utility on the computer and the disk utility when I start up in the Recovery Disk. I did notice that sometimes the permission repeat the same correction several times before it moves on, and sometimes it doesn’t. I have Windows installed on a partition but I keep it unmounted until it is needed for my wife’s work. The dock seems to be just fine and all the apps seems to run just fine. When I insert a photo CD iPhoto does not open but when I insert a music CD iTunes does open.
Also, most every time I open iPhoto it takes a long time(sometimes as long as 2 minutes) for it to load.
Sometimes my Mail (Mail 5.3) does not post new mail but most of the time it does.
Once and a while it seems like the computer slows way down but then it seems ok ten minutes later.
All of these ‘things’ seemed to have happen suddenly and I have not downloaded anything from the internet in some time.
Of course the warranty and extended warranty are both no longer in effect having had this computer for more than three years.
I am running Java and Adobe Player because some of the sites I go to a lot require both.

I believe that insufficient RAM may be the source of some of your problems. If you have a RAM of somewhere 4 to 8GB, you will experience smoother computing. 3GB doesn't seem right, so you might want to learn more by going to this site:
http://www.crucial.com/store/drammemory.aspx
I don't know what know what's happening with your optical drive, but it seems you use your drive quite a bit. In that case, look into a lens cleaner for your machine. It's inexpensive, works quite well.
I hope you'll post here with your results!

Restart and Par deploy

Similar Messages

Maybe you are looking for