Restart every time after i upgrade the software to kitkat 4.4.2
Hello Guys
I have big Problem on HP slate 7 Voice Tab everytime i make a call on program like :
facebook messenger
Skype
imo
The phone make a restart this problem happened after i upgrade the software from jelly bean 4.3 to kitkat 4.4.2
Please Fix this bug in next upgrade kitkat 4.4.3 Or Tell me What To do to fix it
Any answer will be welcome.
Thank You in Advance
HossaM
@VanRaffa
Your solution will not work! It has been tried many times by users, and fails every time.
Other HP Employees have explained why it doesn't work - the lack of a bootloader in update.zip prevents the ability to roll back to Jelly Bean.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
Similar Messages
-
Hi I just got my iPad 2 and updated it to ios7 . Here is my problem: my Chinese input doesn't work , I need to restart every time . Is it the problem of the iPad? Or iOS 7??
Hi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario -
Why the sound of my ipad3 gone suddenly,not first time after i update the software
Why the sound of my ipad3 gone suddenly,not first time after i update the software
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I am not sure which upgrade version caused this to happen. I have upgraded the phone several times since last year and not really a frequent user of face time. I just noticed when I want to test it with my son's macbook.
There isn't a separate app icon for Facetime for the iPhone like there is for the iPad and iPod Touch. Facetime is built into the iPhone's iOS.
Here a refresher on how it works:
iOS: Using Facetime, http://support.apple.com/kb/ht4319 -
There is no camera connected after i upgraded the software from apple
There is no camera connected when i open facetime and photo booth...I've tried to reset the PRAM using cmd+alt+P+R, but the problem still remains...
If you went from 10.8.1 to 10.8.2 and haven't picked this one up yet, there is also a supplemental update which might fix it: http://support.apple.com/kb/DL1600
-
I have been trying to update my software in my macbook pro, but every time I go through the motions of updating/restarting my computer nothing happens and it still shows I need a software update. Anyone know why this is happening?
How large is your HD and how much space do you have left?
Check out the following & do the necessary:
Disconnect all devices from the computer then do the following:
Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
Try SU again.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius. -
I upgraded the software on my iphone 4 and now it's downloading every email message from all my accounts (all previously read). 200 at a time. Manual delete is a problem since there are 3500. Suggestions?
Wow, just posting and it seems that there is a solution that is working for me...
What I've did is I turned off iTunes Match on my iPhone, then turned in on again. Now in my iTunes library on my mac I can get the duplicates to be matched or uploaded to iCloud with a right-click, add to iCloud. iTunes Match starts to check the songs and everything is done correctly. Pretty nice! -
For some reason I cannot uptade Modern Combat 4, every time I try upgrading an error message appears saying you cannot uptade since you do not own the major version of this software. I need to uptade to play online, any help would be appreciated.
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!
You did turned in Settings > General > Usage > Battery Percentage: ON?
Try a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data -
Hi, I upgraded my iPad to version 5.0, I had a message on my Setting to upgrade the software to version 5.0.1, I select install and during installation my iPad2 star rebooting and now doing it non stop. I have no time to restore or do anything. My ipad rebooting every 2 or three minutes
See Here
iPad Unable to Update or Restore
http://support.apple.com/kb/ht4097 -
Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?
Try booting in Safe Mode by holding the the shift key immediately after powering on your system. Safe boot mode will for a directory check of your startup volume, then load only the required kernal extensions (kext files), and deletes some cache files. Once the system boots into Safe Mode you can simply restart the system to see whether the issue has been resolved.
If you still have the issue try resetting the SMC by shutting down the system and disconnecting the power cord for ~15 seconds, then reconnecting the power cord. Next, reset the parameter RAM (PRAM) by holding down the option-option-P-R keys after powering ON the system. Wait until the iMac restarts twice, then let the system boot normally. -
I can't open Firefox. The home page doesn't come up, I just keep getting the Crash Reporter asking me to restart/quit but every time I do this the same message comes back. I've not been able to use Firefox for days now.
Since a few days we have a lot of crashes with [http://www.trusteer.com/product/trusteer-rapport Trusteer Rapport]. If you have this program, try to disable it and see if that stops the crashing.<br>
You can stop Rapport using Start Menu > Programs > Trusteer Rapport > Stop Rapport<br>
You can ask their helpdesk when an updated version of their product will be made available or, if you don't need this software, uninstall it.<br>
http://www.trusteer.com/support/en/report-problem<br>
If you do not have Rapport, then we need to have a crash report ID. When you send Mozilla a crash report it just puts it in a giant database. We have no way of looking it up without the Report ID. I have no idea what is wrong without looking up the crash report. Please get the Report ID of your latest crash report.<br>
See https://support.mozilla.com/en-US/kb/Firefox%20crashes<br>
or http://kb.mozillazine.org/Firefox_crashes<br> -
Every time I try to update software my MacBook Pro (running OS X 10.6.8), the computer gets suspended (freezes) when restarting and nothing gets updated. What should I do to fix the problem?
Try booting into the Safe Mode. If that doesn't work, set up another admin user account and try from there.
Safe Mode - About
Safe Mode -
My sound preference does not retain its output setting on restart. It resets to internal speakers. I'm getting irritated having to change it every time I turn on the Mac. I'm running the latest system software (10.10.2) on an early 2008 Mac Pro with 4 cores and 6 GB of RAM. This was not a problem before Yosemite, and everything else seems to be running fine. Any help appreciated.
Does not retain system sound preference settings
-
I upgraded the software on my Time Capsule and outgoing mail stopped on my Mac Air
Hi
I upgraded the software on my Time Capsule and outgoing mail stopped on my Mac Air
My colleagues are using my Time Capsule on their Mac Air (with Lion OS System) and Dell with MS OS System.
I am on OS X 10.6.8 and was sucessfully using SMTP for outgoing mail .... after my update for the Time Capsule, Mail on my Mac Air stopped
Why?
Thanks in advance
JanHi Garmulewicz,
Can you tell us a little bit about the SMTP service? What port is it set to use? Authentication SMTP? Have you tried manually sending over Port 25, 587 or 465? If you bypass the Time Capsule can you confirm that SMTP traffic still works behind the same modem?
I've personally never seen an update break SMTP, that would imply that the update somehow is blocking the port where SMTP is occurring. What if you configure a personal GMail account or something else, does that work?
Maybe you are looking for
-
Updated to iOS8 and now iMessage does not work on any devices
I've just updated to iOS8, but none of my devices will use iMessage. My iPhone 5, my iPad Mini, and my MacBook Pro cannot connect to iMessage. I have no idea what to do or what I'm missing. All devices show I am properly connected through my AppleID.
-
Charging iPod via USB hub???
Hi Folks, Does anyone know, if it's possible to charge the iPod battery by using only an USB hub (with external power), while computer is turned off? I tried, but with my hub it didn't work. Has anyone experienced the same? Thanks
-
The requested instance is either invalid or not running
I try to set up a datasource to SQL server 2008 Express. And I get always that message : The requested instance is either invalid or not running. I spent a full day looking at all forums threads, I have learn a lot, Looking through all Google return
-
Where to discuss errata in Adobe InDesign CC Classroom in a Book
There is a problem in Chapter 10 of the latest edition of this book. Is there a place to submit errata and get discussion on how to address the problem it creates?
-
Permissions to "Run Report" viewing previously scheduled instances - XIR2
Hey there, I have a deski report that gets scheduled in infoview. (Business Objects XI R2) When one of my users is logged into infoview and views the history of that scheduled report, he clicks on an instance of the report. Everything works fine, exc