Restart numbers after previous level CS5

I have several books with numbered lists in embedded text box sidebars. In each of the sidebars, I have the numbered lists set up as a level 2 numbered list set to restart the numbers after any previous level and the heading, which comes right before the list in every textbox, as a level 1 numbered list with out any number set up so that it doesn't actually appear numbered.  My problem is that the numbers don't reset. I have to manually go to the first item in each of the lists and set it to one because they continue numbering from the previous textbox. They are supposed to restart after the heading, but the heading appears to be ignored. Why is the "restart numbers after any previous level" not working.  Have I set up something wrong?

An additional thought on this solution:
Does it make sense to have to set the previous level to always start at 1 to get the next level to restart to 1? Though it doesn't effect my current application, I could see how it would be functionally useless to have that restart standard when using an outline format.  In most outlines the sublists restart after each instance of a previous level, even when the previous levels do not restart.
Example.
I First level
     A Second level
          1 Third level   
          2 Third level
          3 Third level
     B Second level
          1 Third level
          2 Third level
II First level   
     A Second level
          1 Third level
etc.
See my point?  If you have to set the First or Second levels in my example to always restart at one to get the next levels to automatically restart at 1 after a previous level occurance, this type of standard outline would not work automatically in InDesign.

Similar Messages

  • Restart Numbering After a Heading Style

    FYI: I scoured the web and Adobe for this question. I found pages that answer the question in general, but still left me confused.
    I don't like using the numbering button with RoboHelp because in the output, the numbers convert to bullet points. So, I want to create my own numbering list, but I need to the numbering to start automatically after a heading. I was doing this manually and then the function just quit. Instead of restarting to 1, it just took out the numbering altogether.
    Ugh.

    Hi There, This might be essentially because a CSS is acting its role in the page or project that you have created. Whichever verison of RH you are using, first install the latest updates from Help-->updates. Then try with either removing all the CSS or styles that you have implied or changing them to different one. Post back if it still doesnt work

  • Continue numbering after snippet - it always restarts.

    RH8 HTML
    Hi all.
    I have several topics that are using the same 5 steps of a procedure, which I've put into a snippet, and then add several more numbered steps to the list which are specific to the topic.
    I want the added steps, that aren't part of the snippet to continue the numbering. right now I have the 5 numbered steps in the snippet, and the added steps specific to each topic restart at 1, rather than continuing from 6.
    eg.
    1 Go to Search
    2 Enter your text
    3 Select your criteria
    4 Choose the .....
    5 Click Search.
    1 From the ... window click .....   -  This step is a continuation from the previous 5 but the numbering doesn't continue, instead it restarts.
    Is there a way to continue numbering from a snippet?
    Thanks.
    Nick

    Hi,
    I think that's it impossible to let the numbering simply continue. You can however start the next list where you left of in your snippet. Select the number and right click. Select Bullets and Numbering. Check Restart numbering at and select the number you want your list to continue. Note that you'll have to change all these lists when you add an extra step in your snippet
    Some other options you may consider:
    - Can you split the lists with a header or something? Something like: This consists of two procedures, 1. Your snippet and 2. Your 'hard' text.
    - Are these steps basic steps? If so, you can use a variable like: First, do x. and set that variable in your list. You then set these first five steps as basic knowledge in a getting started tutorial and reference that tutorial.
    Greet,
    Willam

  • Oracle Linux 6.4 installs, runs, and manual shutdown OK ...  but restarts itself after 10 minutes or so

    Hi Guys
    Successfully installed Oracle Linux 6.4 operating system , which subsequently runs as expected.
    When Oracle Linux 6.4 is shutdown using  standard GUI  system/shutdown ,
    it does a clean shutdown and power-off as expected  ....
    UNTIL some 10 minutes or so later , when Oracle Linux 6.4 reboots all by itself from a fully powered-down state.
    Likewise when Oracle Linux 6.4 is shutdown using  standard command line " shutdown -h now" ,
    it does a clean shutdown and power-off as expected  ....
    UNTIL some 10 minutes or so later , when Oracle Linux 6.4 reboots all by itself from a fully powered-down state.
    Clearly it is NOT desirable to have the operating system able  restart of it's own accord.
    A manual shutdown is typically  done for good reason , and the server should remain shutdown.
    The previous version, ie Oracle Linux 6.3 did not exhibit this behavior.
    When Oracle Linux 6.3 was shutdown, it stayed shutdown
    Question
    ======
    Does anyone know how to STOP Oracle Linux 6.4 from restarting itself after a successful shutdown ?
    Thanks
    Bruce

    Does anyone know how to STOP Oracle Linux 6.4 from restarting itself after a successful shutdown ?
    Assuming your network interface is eth0, execute "$ ethtool eth0", like below, and indicate what you get for the lines "Supports Wake-on" and "Wake-on.
    lx04:/root $ ethtool eth0
    Settings for eth0:
            Supported ports: [ TP ]
            Supported link modes:   10baseT/Half 10baseT/Full
                                    100baseT/Half 100baseT/Full
                                    1000baseT/Full
            Supported pause frame use: No
            Supports auto-negotiation: Yes
            Advertised link modes:  Not reported
            Advertised pause frame use: No
            Advertised auto-negotiation: Yes
            Speed: 1000Mb/s
            Duplex: Full
            Port: Twisted Pair
            PHYAD: 0
            Transceiver: internal
            Auto-negotiation: on
            MDI-X: Unknown
            Supports Wake-on: pg
            Wake-on: d
            Current message level: 0x0000003f (63)
                                   drv probe link timer ifdown ifup
            Link detected: yes
    Then check in your BIOS (usually under APM) for any enabled power-on settings associated with PCI or PCIe bus (your NIC will use one or the other).

  • In place upgrade to 2012 R2 fails, Setup can't continue. Your computer will now restart, and your previous version of windows will be restored.

    
    I have multiple Windows Server 2008 R2 machines in which I am attempting to do an in place upgrade to 2012 R2, and it is repeatedly failing.
    Setup gets all the way through, and it says Getting ready, followed immediately by an error saying: Setup can't continue.  Your computer will now restart, and your previous version of Windows will be restored.
    I am attempting to install:
    Windows Server 2012 R2 Datacenter (Server with GUI)
    x64 Date modified 3/18/2014
    I have found several posts, many discussing how disk space can be an issue, I have increased disk space so it shouldn't be an issue.  I have also made sure the only only partition on disk 0 is C: and system reserved.
    I have disabled all unessential services and went through and removed all unessential applications, and extras.  Still getting the error.
    Here is the update log
    2014-11-24 08:20:20:715
    888 ed8
    AU AU initiates service shutdown
    2014-11-24 08:20:20:715
    888 ed8
    AU ###########  AU: Uninitializing Automatic Updates  ###########
    2014-11-24 08:20:20:840
    888 ed8
    Report CWERReporter finishing event handling. (00000000)
    2014-11-24 08:20:20:840
    888 ed8
    Service *********
    2014-11-24 08:20:20:840
    888 ed8
    Service **  END  **  Service: Service exit [Exit code = 0x240001]
    2014-11-24 08:20:20:840
    888 ed8
    Service *************
    2014-11-24 08:23:27:265
    892 9a0
    Misc ===========  Logging initialized (build: 7.6.7600.320, tz: -0500)  ===========
    2014-11-24 08:23:27:281
    892 9a0
    Misc  = Process: C:\Windows\system32\svchost.exe
    2014-11-24 08:23:27:281
    892 9a0
    Misc  = Module: c:\windows\system32\wuaueng.dll
    2014-11-24 08:23:27:265
    892 9a0
    Service *************
    2014-11-24 08:23:27:281
    892 9a0
    Service ** START **  Service: Service startup
    2014-11-24 08:23:27:281
    892 9a0
    Service *********
    2014-11-24 08:23:27:635
    892 9a0
    Agent  * WU client version 7.6.7600.320
    2014-11-24 08:23:27:635
    892 9a0
    Agent  * Base directory: C:\Windows\SoftwareDistribution
    2014-11-24 08:23:27:635
    892 9a0
    Agent  * Access type: No proxy
    2014-11-24 08:23:27:635
    892 9a0
    Agent  * Network state: Connected
    2014-11-24 08:24:14:827
    892 9a0
    Report CWERReporter::Init succeeded
    2014-11-24 08:24:14:827
    892 9a0
    Agent ***********  Agent: Initializing Windows Update Agent  ***********
    2014-11-24 08:24:14:827
    892 9a0
    Agent  * Prerequisite roots succeeded.
    2014-11-24 08:24:14:827
    892 9a0
    Agent ***********  Agent: Initializing global settings cache  ***********
    2014-11-24 08:24:14:827
    892 9a0
    Agent  * WSUS server: <NULL>
    2014-11-24 08:24:14:827
    892 9a0
    Agent  * WSUS status server: <NULL>
    2014-11-24 08:24:14:827
    892 9a0
    Agent  * Target group: (Unassigned Computers)
    2014-11-24 08:24:14:827
    892 9a0
    Agent  * Windows Update access disabled: No
    2014-11-24 08:24:14:951
    892 9a0
    DnldMgr Download manager restoring 0 downloads
    2014-11-24 08:24:14:981
    892 9a0
    AU ###########  AU: Initializing Automatic Updates  ###########
    2014-11-24 08:24:14:997
    892 9a0
    AU  # AU disabled through Policy
    2014-11-24 08:24:14:997
    892 9a0
    AU  # Will interact with non-admins (Non-admins are elevated (User preference))
    2014-11-24 08:24:15:043
    892 9a0
    AU Initializing featured updates
    2014-11-24 08:24:15:043
    892 9a0
    AU Found 0 cached featured updates
    2014-11-24 08:24:15:397
    892 9a0
    Report ***********  Report: Initializing static reporting data  ***********
    2014-11-24 08:24:15:397
    892 9a0
    Report  * OS Version = 6.1.7601.1.0.196880
    2014-11-24 08:24:15:397
    892 9a0
    Report  * OS Product Type = 0x00000007
    2014-11-24 08:24:15:428
    892 9a0
    Report  * Computer Brand = VMware, Inc.
    2014-11-24 08:24:15:428
    892 9a0
    Report  * Computer Model = VMware Virtual Platform
    2014-11-24 08:24:15:428
    892 9a0
    Report  * Bios Revision = 6.00
    2014-11-24 08:24:15:428
    892 9a0
    Report  * Bios Name = PhoenixBIOS 4.0 Release 6.0     
    2014-11-24 08:24:15:428
    892 9a0
    Report  * Bios Release Date = 2013-07-30T00:00:00
    2014-11-24 08:24:15:428
    892 9a0
    Report  * Locale ID = 1033
    2014-11-24 08:24:15:582
    892 9a0
    AU Successfully wrote event for AU health state:0
    2014-11-24 08:24:15:582
    892 9a0
    AU Successfully wrote event for AU health state:0
    2014-11-24 08:24:15:582
    892 9a0
    AU AU finished delayed initialization
    2014-11-24 08:24:20:865
    892 6a0
    Report CWERReporter finishing event handling. (00000000)
    2014-11-24 08:55:38:187
    892 9a0
    AU AU initiates service shutdown
    2014-11-24 08:55:38:187
    892 9a0
    AU ###########  AU: Uninitializing Automatic Updates  ###########
    2014-11-24 08:55:38:250
    892 9a0
    Report CWERReporter finishing event handling. (00000000)
    2014-11-24 08:55:38:297
    892 9a0
    Service *********
    2014-11-24 08:55:38:297
    892 9a0
    Service **  END  **  Service: Service exit [Exit code = 0x240001]
    2014-11-24 08:55:38:297
    892 9a0
    Service *************
    Any ideas on how I can resolve this, or further troubleshoot?

    I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
    trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
    The problem was the separated System Reserved Partition. After I removed using this instructions:
    http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
    The upgrade ran ok, and now have my DC as Windows 2012 R2.
    Hope that helps!.

  • How do I find Bridge - it's not on my Mac (Lion) after install of CS5 Design Premium installation?

    I had a disk crash on my Mac with Lion.  I reinstalled all software including CS5.  Before the crash, I had Bridge installed & used it a lot.  After reinstalling my CS5, I seem to have everthing except Bridge.  When I tried Phtotoshop > File > Browse in Bridge - nothing happens.  I've searched my drive & can't find Bridge. 
    How can ai get it back?
    Thanks!

    Actually, on a Mac, the Bridge application folder resides on the first level of the root-level Applications folder, not in the Adobe folder, which only contains the Adobe Help.app, the Adobe Patch Files folder, and some Flash stuff.
    Also, there are no ".exe" files on a Mac.  Applications have an ".app" extension.

  • RAW Images Alter When Saved After Processing in CS5 Camera RAW?

    Hi,
    I am currently experiencing a problem in Photoshop CS5, where after processing a CR2 RAW image file in Camera RAW, whether I then decide to open the image straight into CS5, or save as a jpeg or tiff file, the image completely alters from what I was previously seeing in the Camera RAW window?
    The saved jpeg/tiff, or image now shown in CS5 is now very tinted, where objects that were perfectly white in the Camera RAW window are now a dirty yellow colour.
    I was just wondering if there was any advice any of you could give me as to what the problem might be?
    I have made sure that both CS5 and the Camera RAW window are both set to sRGB, but it has had no effect on the problem.
    Thank you in advance for any help
    Russ

    Color Management in Photoshop.
    Sent from phone.
    În data de 02.09.2012 23:08, "Tube Screamer" <[email protected]> a scris:
       Re: RAW Images Alter When Saved After Processing in CS5 Camera RAW? created by Tube
    Screamer <http://forums.adobe.com/people/Tube+Screamer> in *Adobe Camera
    Raw* - View the full discussion<http://forums.adobe.com/message/4667772#4667772

  • Restart numbering series

    When I restart numbering for the new year, this is combined with existing (previous year's) series, and once I add new document for the new year, I see two same numbers one last year's and one new year's number. This is very annoying specially when I want to search. I want to be able to continue from previous year's data but want only the new year data shown on screens. Is this possible???

    Hi Krishna......
    As it is there inside Database so it will be come ar front screen whenever you try to search any particular document even though the last year series is locked......
    You can try searching document through No. Series in find mode...........
    Regards,
    Rahul

  • Dear Apple Support,  Good day to you. This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..  After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need  to resto

    Dear Apple Support,
    Good day to you.
    This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
    After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need  to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
    After restoring it my ipad is now opening and it is like new that i need to set up again.
    I set up again until i reach the apple id and password.
    I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
    What will I do? Please help.
    Thank you
    Sent from my iPhone
    Begin forwarded message:
    From: Apple <[email protected]***>
    Date: October 9, 2013 at 11:53:53 PM GMT+4
    To: ****
    Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini 
    Dear Leslie J.,
    Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
    If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
    Apple Support
    <Email Edited By Host>

    1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
    2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
    Is your iPad working?

  • Purchase Order Workflow message for previous level approver

    Hi folks!!
    We are implementing PO workflow through which we want to notify the next level releaser as well as we also want to notify the previous levels releaser as well as Purchase requisition creator (if PR has been used as reference document to create PO).
    I have already successfully implemented the workflow, in which next level of approver gets the notification in his/her SAP Business Workplace as soon as the PO gets approved by the previous level.
    But my requirement is on final approval of PO, notification should also send back to the previous levels approver of PO and Requisition creator.How can I achieve it, please help.
    Best regards

    Hi,
    A check can be made during final level of approval for which e-mail will get triggered to the previous approver and the requisitioner. you would need to provide a Logic to your developer with the message body whihc will trigger an e-mail during final approver and mail recipients will be the previous approver and the Requisitioner which can be picked from Line item in Purchase Order.
    Prashant

  • I am trying to generate an array of 30 random numbers. after every 5 readings a new vi should open and tell the user that 5 readings has been completed. and again carry on with the generation of array.

    since i do not have a transducer now, i am currently generating an array of 30 random numbers. after every 5 readings a warning should be given to the user that 5 readngs are complete. this cycle should repeat. the array size is 30.
    please help me out,  waiting for reply asap.
    once i have the transducer, i will be taking 30 analog samples and then after every 5 smaples that wraning will be displaye din a new VI
    Solved!
    Go to Solution.

    Use a while loop with a time delay representing your sampling period.
    Use the count terminal to check if equals 4, so 4th iteration=5th sample.
    Use a case structure. The true case will only be executed on the 4th iteration.
    In the true case place a subVI  with your desired message in the front panel. Go to the VI properties window and set "open front panel when called".
    The closing condition of the warnign is not giving in your description.
    Consider that rather than usign a subvi for this, you could use the "One/Two/Three button dialog" or "display message" vis at the "dialog and user interface" pallete.
    Please give it a try and send your own VI. Do not expect us to provide a working solution.
    Regards,

  • How do you install an iOS update on iPhone via iTunes after previously downloading it

    How do you install an iOS update on iPhone 5 via iTunes after previously just downloading it

    Hello Myyster,
    Thank you for using Apple Support Communities.
    You can use the following article to install the iOS update on your iPhone:
    Update your iPhone, iPad, or iPod touch iOS software
    Regards, 
    Jeff D. 

  • SSRS 2008 R2 Services not restarting automatically after reboot

    SSRS 2008 R2  Reporting instance not restarting automatically after patches install.  Is there a way to resolve the issue
    Windows 2008 R2 Server
    16 GB RAM

    Hi,
    Follow this article to resolve the issue:
    Reporting Services service doesn't start after the installation of MS12-070 security patch
    http://blogs.msdn.com/b/mariae/archive/2012/11/12/reporting-services-service-doesn-t-start-after-the-installation-of-ms12-070-security-patch.aspx
    Workaround 1:
    Modify the registry to increase the default time-out value for the service control manager. To increase this value to 60 seconds, follow these steps:
    1. Click Start, click Run, type regedit,and then click OK.
    2. Locate and then click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control.
    3.  In the right pane, locate the ServicesPipeTimeout entry.
    Note If the ServicesPipeTimeout entry does not exist, you must créate it. To do this, follow these steps:
    a.On the Edit menu, point to New, and then click DWORD Value.
    b.Type ServicesPipeTimeout, and then press ENTER.
    c.Right-click ServicesPipeTimeout, and then click Modify.
    d.Click Decimal, type 60000, and then click OK.
    This value represents the time in milliseconds before
    Restart the computer for the changes to take effect. Check that SSRS services can be started now.
    You cannot start SQL Server Reporting Services after you apply the update that is discussed in KB 2677070
    http://support.microsoft.com/kb/2745448/en-us
    Thanks.
    Tracy Cai
    TechNet Community Support

  • I purchased a Mac book pro in oct 2011, I restarted it after updating and it,s stuck on apple symbol, I hit command R while restarting and clicked on disk utility. It says disk can't be repaired, apple wants $249 to tell me what's wrong. Please help!

    I purchased a mac book pro in oct 2011, I restarted it after updating and it,s stuck on apple symbol, I hit command R while restarting and clicked on disk utility. It says disk can't be repaired, apple wants $249 to tell me what's wrong. Please help!

    What Apple store told you they wanted $249.00 to tell what is wrong?
    If this is a 13" Macbook Pro then that is the cost of the Extended Applecare warranty. As you are outside the 90 days of Free Phone Support then what Apple told you is that to get Phone Support you would either need to pay $45 per phone call or pay $249.00 for the Applecare extended warranty which comes with 3 years Free Phone Support from date of purchase.
    Or you can take it to a Apple Genius Bar and have them look at it for Free.
    Every Mac comes with 1 year warranty and includes only 90 days of phone support. You can buy the extended Applecare warranty anytime within the first year of ownership, IE until the 1 year warranty runs out.
    I suggest you have your computer looked at by either an Apple Authorized Repair Center or Genius Bar and then before the 1 year warranty runs out buying the extended warranty

  • My imac 10.6.8 hangs on the spinning wheel after installing Samsung Kies (KiesMac_2-0-0-13023_10_1). I was able to restart ok after installation; I even moved some files from my Galaxy 3 to the imac. But on the next (and all subsequent) restart attempts,

    My imac 10.6.8 hangs on the spinning wheel after installing Samsung Kies (KiesMac_2-0-0-13023_10_1).
    I was able to restart ok after installation; I even moved some files from my
    Galaxy 3 to the imac.
    But on the next (and all subsequent) restart attempts, it hangs on the spinning wheel.
    How to fix? Thanx in advance.

    Mac OS X: Gray screen appears during startup 

Maybe you are looking for

  • F4 search help on report selection screen

    Hi to all I am developing a report. There are four fields on selection screen. ncode ccode mcode mj_code On these fields i want search help. When I press f4  all possible values should display. Then in second field, when I press F4 , only the values

  • Sort order in iPad's Remote app

    I have a few smart playlists in iTunes. When I control iTunes from my iPad's Remote app, some playlists show up (correctly) ordered by Album, other smart playlists are ordered by song. In iTunes (on my MacPro), though, both are ordered by album. Is t

  • Publishing error (failed to connect to server)

    Using X5, I am trying to publish to our help server (web help pro), but getting a message in the output window "Warining: Failed to publish to 'yourserver'. reason: Failed to connect to server. All my permissions are set up as described here: http://

  • Cross Company Code purchasing

    Hi,     Please help me to concept of Cross Company Code purchasing . I need a Document regarding this or configuration setting , its requirement from one of our client. So pls send me some document about the Cross Company Code Transaction. Thanks Muk

  • OAM An error has occurred! nection refused

    I have problem in the OAM, when I try configurate the Workflow Notification mailer. I have this problem. An error has occurred! nection refused /u01/oracle/TEST/inst/apps/TEST_srvrcotest/logs/appl/rgf/oam [10:11:43:22, 12/16/11] java.lang.RuntimeExce