Restart of RV042 Router

Can anyone answer this for me please? Would I lose my router settings if I were to restart the RV042 router from the System Management>Restart section of the router UI?
The "restart" command is just like a warm reset, correct???
Thanks,
Max

Max,
You are correct. Restarting should not affect the configuration.

Similar Messages

Having issues with IP Phones and the RV042 Router

Hello,
We have recently purchased Ring Central IP Phones and are having audio issues. We have a RV042 router with two WAN connections. We called Ring Central Tech support and were told that IP Phones will not work with the RV042 while loading balancing is enabled. Has anyone ever successfully setup IP Phones with a RV042 router while having loading balancing enabled? I configured the port range that the IP Phone use to be bound to WAN 1 but still having problems. Thanks in advance.
Loren

I Have the 5s but my screen keeps freezing up and I have to force restart on my apps!

What is the command to check if there are any active calls before restarting the voice router?

what is the command to check if there are any active calls before restarting the voice router? thanks

Hi.
I can suggest show call active voice or show voice call status or show sip-ua call brief in case of SIP TSP.
HTH
Regards.
Carlo

Online Emulator for RV042 router

Hello:
I am looking for Online Emulator for RV042 router.
If yes, please reply with a link.
If no, please give me a similar one.
Many thanks.

Sang1224 wrote:
Please keep me posted regarding the outcome.
I am never surprised by Verizon's marketing shenanigans, but everyone in my cul-de-sac is running a VZ WiFi router, so the signal is always bogged down. I just want to get this new router and see if it helps with my service.
I will try again today, if I can get someone on the phone.
I'll keep you posted. No contact from either here or {edited for privacy} Verizon Executive Relations Team, who emailed me yesterday. I just checked my call log in DV and my cell, and no missed calls.
In my now daily check of offers, today was 75/75 for $10 and a new router. I clicked it, and unlike your experience, it did offer it to me for only $10 more for 2 years. As tempting as it was to do it for another free router I resisted, waiting to see how this is resolved.
I will wait till later today to see if anyone reaches out before going further.

Issue in Configuring Linksys RV042 router

Hi,
I am facing some issues in configuring the Linksys RV042 router with dual WAN configuration. We are having two internet connection and I want to perform the "Load balancing" between the two internet connections. I have followed the RV042 manual and configured the router.
But while using the Linksys RV042 for load balancing the "Outlook 2007" and "MSN" are frequently disconnecting in the client machines. We could not use the Linksys RV042 router because of this issue.
We are using the "Static IP" for the two internet connection and configured with manual. We are facing issue only in "Outlook" and "MSN" but I can browse the sites without any issues.
Is there any configurtaions needed? Please help us to get the solution in this issue.
If you need any more details please mail me @ [email protected]
Thanks in Advance,
R. Manikandan.

R. Manikandan,
Without knowing more about your configuration, and the reason for "Outlook" and "MSN" disconnecting. I would suggest that you look at the following documentation for setting up "Dual WAN" on the RV042.
http://www.cisco.com/en/US/products/ps9923/products_qanda_item09186a0080a36632.shtml
It sounds like you may need to setup "Protocol Bindings" for your SMTP traffic to be directed out a specific WAN port.
If you continue to have issues, please let us know.
Darren

Unable to connect through QuickVPN to RV042 router

Hi!
I've RV042 router with the firmware 1.3.12.19.
I'm not able to connect from my QuickVPN client ver 1.3.03 to the router.
If anyone know the fix for the above issue kindly let me know.
Thank you,
Regards,
Muthu

Welcome to the forum!
There has been no end to the "Quick VPN not connecting" threads here on the forum, and there can be a number of factors that will cause QVPN to fail. It has gotten to the point where a fellow engineer has created a thread just for Quick VPN issues to try and keep everything contained in one place. It may be prudent to post your question in his thread that you can find at the link below.
QVPN Thread
However, if you would like to continue the discussion here in your own thread I would suggest the first thing you do is post at what point during the connection process does QVPN fail? For troubleshooting purposes go into the directory that you have QVPN installed which for most people will be Program Files>Cisco Small Business> and go into the Quick VPN Client folder. In this folder you will find a log.txt file. If you can post the output from this file (and please edit out your network information) then we might have a better idea why the connection is failing for you.

RV042 Router SMTP port change

Hello, I have an RV042 that I have configured to send alert logs to a comcast email address. Recently comcast changed their SMTP port from 25 to 465. I can't find where to change the port settings in the RV042 to send the router logs via port 465. Any help would be appreciated.
Thanks
Mark

Hi Mark, thanks for using our forum, my name is Johnnatan and I am part of the Small business Support community. You can change the port number using a port-forwarding or a One-to-One NAT in your device, you can also specify the syslog server, I´ll share with you some documentation about it:
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=544
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=346
I hope you find this answer useful,
**Please rate useful posts so other users can benefit from it**
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

RV042 router multiple WAN IPS assigned to different LAN IPs range

I would like to have multiple WAN IPS and assigned them to different LAN IPs. If i used the option One-to-One NAT its give me only the LAN IP 192.168.1.xxx . There is an option to specify more than one LAN IPs but its not possible to forward ports to these extra LAN IPS or to setup rules.
Is there anyway to mange this with this router. IF not what is router that will meet my requirements?

Andreas,
Unfortunately what your wanting to do will not work with the rv042. It will only allow the one to one nat rules to be applied to the default lan subnet.
You will have to use the sa500 series router which will let you do ip aliases to different lan subnet addresses.

RV042 Router

How I Change the setting of the router to allow magicJack to have tone to able to send and receive calls.
Thank you,

Good afternoon,
The RV042 is capable of rules that map multiple public IP addresses in a range to multiple private IP addresses in a range. This should be available once you check the "enable" checkbox on your RV042.
Ensure you have the newest firmware of 1.3.12.19-tm
I will try to locate a RV042 and upload screenshots of what this looks like. I do not see that the documentation specifcally state that one-to-many is available, but that type of option is available under the one-to-one section.
I hope you found this helpful.
Thanks,
-Lindsey

RV042 - route some IP addresses to WAN2

My Linksys RV042 is in Smart Link Backup mode, WAN1 beeing the primary interface.
I want certain part of my network, IP addresses 192.168.10.128 - 192.168.10.159, to use WAN2 all the time, so that WAN2 is utilized. How to add route to do that? Please help.

Well this is a toughy. Since we cannot define our IP rules with that kind of precession on the RV042 we really can't do that. Now here is a screenshot of something that may work. I say "MAY" as in a real big maybe! The thing is, we can't create a rule that says "send this LAN to this WAN"; otherwise, you probably would not even be asking.
I think if we deny traffic from the WAN to your IPs they should respond back to that particular interface, but there is a small catch. Since our two options on the RV042 is either "Smart Link" or "Load Balance" we are stuck in a little pickle. This is because the client (LAN) is usually the one to initiate the connection and the router will Load Balance and IT will decide which WAN port to go out on. So, my little idea may not work. I am not at work at the momment so I cant take a look at a RV, but I do beleive with the latest firwares we can do protocol bindings and from there we can split traffic.
Anyway, what we need to battle with is "Load Balancing" and we need to place rules that will work in this mode. Let me know if this helps, or maybe someone else will step in with a better idea.

Hi my iphone 4s keeps droping facetime calls and restarting my wifi router home and work. does anyone else have this issue?

I previously had the iphone 4 and on the same routers never droped a facetime call nor did my wifi router restar... is this a 4s issue??? pls help

I'm willing to bet it's dropping the connection because the router is rebooting. Try updating the firmware of the router. If that doesn't stop it re-starting spontaneously, I'd look into a new router.

Remotely restart FIOS (MI424WR) Router

My router frequently slows speeds to a crawl or stops working.
Does the router have an easy way to do this, or has anyone came up with a script to: automatically login remotely to reboot the router?
The router doens't have SSH and I refuse to use telnet. I'm gonna try to use linux/curl to script the behavior of logging in and clicking the reboot router link.

I have the same problem and have to reboot my gen 3 actiontec router every few days as my upload speeds come to a crawl, oddly download speeds are fine. So here is what I ended up doing. This is from a Windows 7 64 bit PC and this automtically reboots the fios actiontec gen 3 router every night. The PC that runs this script needs to be powered on at the time this script runs.
1) Enabled Telent Access for Local Access Only (that means while only on my local network). I did this by
a) login with browser to 192.168.1.1 with admin id and password
b) Go to Advanced .. Local Administration .... Allow local telnet access ... Using Primary Telnet Port (23)
2) Download Telnet Scripting Tool a.k.a TST10.exe from http://www.theworldsend.net/download.php?get=TST10&extension=zip
3) I unziped this download and placed the file TST10.exe file from the TST10.zip in this directory
"F:\My Documents-James\Dropbox\Dropbox\reboot-router"
4) I enabled Telnet Client on the Windows 7 PC I am running this from by turing on the telnet client windows feature
. Here is how to do that
http://social.technet.microsoft.com/wiki/contents/articles/910.how-to-enable-telnet-client-in-window...
5) I created this script and called it "reboot-router.txt" and placed in the same folder as the tst10.exe program. Here are the exact contents of this file, except replace "admin" with the administrator id if you changed it on your router (I did) and place the password for this admin id (fios admin password) on the 5th line of the script
192.168.1.1
WAIT "Username:"
SEND "admin\m"
WAIT "Password:"
SEND "enteryouradminpassswordhere\m"
WAIT ">"
SEND "system reboot\m"
WAIT ">"
6) Now from a command prompt I would run this command
tst10.exe /r:reboot-router.txt
This would reboot the router. Now the challenge was to get this program to run automatically with "parameters" via windows scheduler. I could not get that to work for some reason via the add arguments. So I had to create a batch file.
7) Create a batch file called "reboot-router.bat" and I placed it in the same folder with the .txt file and .exe file
"F:\My Documents-James\Dropbox\Dropbox\reboot-router". Here are the exact contents of this .bat file.
title reboot router
F:
cd "F:\My Documents-James\Dropbox\Dropbox\reboot-router"
@echo:
sleep 2
tst10.exe /r:reboot-router.txt /o:output.txt /m
@echo:
8) Create a windows task to run every day at 4 am to run this reboot-router.bat file. Here is how I did that
a)Right Click My Computer from desktop ....
b) Click Manage (to be at Computer Management) ...
c) Click Task Scheduler under System tools
d) Under actions on right side click "Create a basic task"
e) give it a name such as reboot router..
f) click Next
g) Keep Daily radio button checked and click Next
h) select the time you want to have this run and keep other defaults of recur every day "1" and Start date
i) Select "Start a program" for "What actions do you want the task to perform"
j) For Program or Script click the browse button and point it to reboot-router.bat
in my case it was "F:\My Documents-James\Dropbox\Dropbox\reboot-router\reboot-router.bat"
k) click Next
l) give it name
9) You are now done!!!!
I tested this at step 6 to make sure I had everything working
Good luck to everyone, James Stroud

Disable SIP ALG in RV042 router?

Using these routers for VoIP phones, the manufacturer says that SIP ALG must be disabled. I cannot find a setting for this.

RV042 does not suport SIP ALG.

Quickvpn / client to gateway vpn rv042 can only ping router

I am setting up remote access using an RV042 router. Using quickvpn or a client-to gateway vpn and shrewsoft client, I can only access/ping the LAN side of the remote router and one machine on the remote network. The PPTP server and native Windows 7 connection provide access to all machines on the remote network.
I have 2 possible reasons for this and would like to find the real reason:
1) The remote RV042 is behind another router, and that router restricts access other than the PPTP traffic.
2) The VPN tunnels other than PPTP only allow access to the remote LAN side of the router and remote machines that have the remote router defined as their gateway in the IP configuration.
Any ideas?

I've narrowed the problem down to option 2 above. If I change the gateway of a LAN resource to point to the LAN side of the router, it can be accessed through the VPN tunnel.
I haven't had time to see if adding routing entries can fix this problem. Any suggestions will be appreciated.
Also, I would appreciate an explanation of why the PPTP connection works. I will research this myself (eventually) but am already backed up with other projects..

When my 4S connects to my home wifi, it kicks all other devices off and the router has to be restarted. Can anyone help?

I am using an iPhone 4S with 16gb memory. I did not yet update to iOS 8. I'm using 7.1.2. I have never had any problems previously using 3G or wifi. We just moved and have a new Netgear router supplied by our new ISP. We have ADSL connection. The router seems to be working fine for all the devices in the house. At any time we may have 2 or 3 laptops connected, as well as Kindle Fires, iPod Touches, and my husband's iPhone (which is the same make, model, year as mine). My iPhone will connect, but usually within minutes after connecting my iPhone 4S (though sometimes 30 minutes or more later), it kicks everyone offline and the router needs to be restarted. The router shows appropriate green lights and I can see it on my list of available networks, but if I try to connect I get the "unable to connect to this network" message until we restart the router. No one else is able to reconnect until the restart, either.
I have tried resetting network settings on my iPhone. I have completely turned off my iPhone and the router. I have talked with someone at our ISP and they did a reset of the router with me. They think the router is bad. But it works completely fine for everyone else in the house, so I can't help but think we are having a connection issue between the router and my iPhone.
Any help you can offer would be greatly appreciated! Thank you!

Is her iPhone in a case by any chance? If so, remove the case and try again. How does her iPhone work in free Wi-Fi locations?
Try resetting the iPhone...
Press and hold the Home and On/Off buttons simultaneously until you see the Apple logo, then release. This may take up to 10 seconds. This is the equivalent of a re-boot and you will not lose any data.
If none of the above work take it to an Apple store or AASP for evaluation. She will not be charged folr this and they will suggest a solution if there is a fault.

Restart of RV042 Router

Similar Messages

Maybe you are looking for