Restart of server

Hi,
Can anyone tell me after what kind of changes in Portal System, srever needs to restart for the changes effect?
Here my specific question is are we need to restart the server after changing service settings from visual administrator tool for example <b>http trace settings</b>?
Thanks,
Sanjeev

Ranjeet,
Is it same for all service related changes?
Thanks,
Sanjeev
Message was edited by:
sanjeevareddy gujjula

Similar Messages

Nodemanager does not restart managed server after Linux OS reboot

Running Linux 2.6.18, Sun JDK 1.6.0_14, and WebLogic 10.3, we have a correctly functioning nodemanager watching a single managed server. If I kill -9 the managed server, the nodemanager fires up a new one immediately. If, however, we reboot the box, the nodemanager will start cleanly and will not start the managed server. It appears to believe the node should remain down and reports its status as UNKNOWN.
I've seen where this is a known problem on Windows boxes, easily gotten around by supplying the -Xrs parameter to the startup parms for the managed server. (Section 5 of the general nodemanager config doc.) I don't see, however, where there's an equally clean solution for Linux.
Things I've tried:
+ When I set the server to DEBUG, it shows zero sign of receiving a shutdown signal. It's dumping loads of cluster messages, etc, into the log and then suddenly the log just ends so it's dying via kill -9. If the nodemanager is still running at that time, it might try to restart the managed server and log it somewhere as permanently failed.
+ The nodemanager only logs to INFO level, and logs no evidence of deciding to leave the node down. (DEBUG is an invalid LogLevel, so that's all I've got.)
+ A restart signal sent from our AdminServer (on another Linux box) successfully starts the managed node through the nodemanager. Nothing unusual occurs or is logged.
Things I'm curious about:
+ Is there some way to see in what state the nodemanager believes the managed server to be?
+ Is there some value in some doc somewhere that might say the server should not be restarted?
+ Is there not a log of NodeManager client actions? I don't see anything in domain.log or AdminServer.log except when the NM is down.
Thanks,
Kevin
ListenPort=5556
ListenBacklog=50
SecureListener=true
AuthenticationEnabled=true
NativeVersionEnabled=false
CrashRecoveryEnabled=true
JavaHome=/appl/java/jre
StartScriptEnabled=false
StopScriptEnabled=false
StartScriptName=startWebLogic.sh
StopScriptName=
LogFile=/appl/bea/wlserver_10.3/common/nodemanager/logs/nodemanager.log
LogLevel=INFO
LogLimit=0
LogCount=1

can you set NativeVersionEnabled to true. We have faced this in windows which was fixed by changing this property. Some notes from that issue:
Faced this interesting issue in Windows 2008 environment. Managed Servers were started by node manager and it was expected that on a system restart after a crash, the node manager will restore the state of the managed servers to the state it was before the crash. Node Manger was configured to run as a windows service. Hence it started after the server restart. But the individual managed servers were not getting started. Interestingly, for the managed servers started by the node manager there were no <Managed_Server_Name>.lck file in the <Server>/data/NodeManger folder.
To fix this always set the following properties in the nodemanager.properties on the node maager home directory.
CrashRecoveryEnabled=true /* This by default is set to false. This needs to be turned for auto restart after crash to work */
NativeVersionEnabled=true /* This is by default set to true and it should be set as such. If you turn this off on platforms for which weblogic provide native JNI libraries ( e.g. as in Windows 2008) then this wont create the .lck file and hence node manager wont restart the managed server after the crash.
Note: As per official documentation .lck files are required for weblogic node managers to do auto restart after system crash
From Official documentation:
After the system is restarted, Node Manager checks each managed domain specified in the nodemanager.domains file to determine if there are any server instances that were not cleanly shutdown. This is determined by the presence of any lock files which are created by Node Manager when a WebLogic Server process is created. This lock file contains the process identifier for WebLogic Server startup script. If the lock file exists, but the process ID is not running, Node Manager will attempt to automatically restart the server.
If the process is running, Node Manager performs an additional check to access the management servlet running in the process to verify that the process corresponding to the process ID is a WebLogic Server instance.
After the system is restarted, Node Manager checks each managed domain specified in the nodemanager.domains file to determine if there are any server instances that were not cleanly shutdown. This is determined by the presence of any lock files which are created by Node Manager when a WebLogic Server process is created. This lock file contains the process identifier for WebLogic Server startup script. If the lock file exists, but the process ID is not running, Node Manager will attempt to automatically restart the server.If the process is running, Node Manager performs an additional check to access the management servlet running in the process to verify that the process corresponding to the process ID is a WebLogic Server instance.
*/

Site does not load after some minutes of creation or after restart the server

Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Hi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Why do I need to stop and restart web server?????

I am developing servlets on sun's standard web server as well as with Netscape's web server.
The problem is every time I make any changes to servlet and recompile my code, changes are not visible until I stop and restart web server. I guess web server uses cached version of servlet.
Can any body help me to solve this problem? It is matter of some setting issues in web server. But since I am novice, I don't know.........

Some app servers have a "reloadable" attribute that can automatically detect changes in your servlet and reload your application for you. Not sure if all do though... but check through the docs on your app server and see if there's something similar. If not, you're probably stuck manually restarting.

Linked Server unable to Connect in SQL Server 2012 after Restarting SQL Server Service it works fine. Why?

I have created a Linked Server to Access Database of 64 MB in Size located in Remote System to SQL Server 2012.In Start for Some time it works fine and after it is giving the Error
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
Previously I thought it as Permission Issue. By trying some fixes proposed in forums it not fixed. But, after restarting the SQL Server Services without changes to the linked Server it works perfectly. How could i fix it. I don't want restart the SQL Server
Service it leads to Some other process failures.
RehaanKhan. M

After all the Errors, When I am restarting the SQL Server its working correctly.
Whats the problem it is clearing itself after restarting of SQL Server. Why ?. I can't find anything regarding this in SQL Server .
The following are the Errors i got connecting to SQl Server.
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
Error-2:
Executed as user: RMS\Administrator. Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST". [SQLSTATE 42000] (Error 7303) OLE DB provider
"Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.". [SQLSTATE 01000] (Error 7412). The step failed.
After unchecking the Allow In Process in OLEDB.ACE Provider Properties.
Msg 7399, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
The OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" reported an error. Access denied.
Msg 7301, Level 16, State 2, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot obtain the required interface ("IID_IDBCreateCommand") from OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
for to fix above error i have followed the instructions in the following link,
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/08/19/permissions-needed-to-set-up-linked-server-with-out-of-process-provider.aspx
This also failed to work. I Restarted SQL Server and make the Linked Server Properties Default to my Configuration and it works fine.
Can you suggest me a solution for this issue. Every time i don't want to restart SQL Server Services as it effects other jobs and Processes.
Thank you.
RehaanKhan. M

Restarting App server and Process Scheduler

Hi all,
Can any body send me the document on how to Restart App server and Process Scheduler.
Thanks In Advance
Karthik

Use the psadmin utility under $PS_HOME/appserv.
https://peoplebooks.uta.edu/PSOL/pt846books/eng/psbooks/tsvt/chapter.htm?File=tsvt/htm/tsvt03.htm%23H3005
Nicolas.

How to add swap in solaris 11 and still will take effect even you restart the server

Hi,
I would like to ask on how to add swap file in solaris 11 will still take effect even you restart the server.
swap -l
zfs create -V 2G swappool/swap2
swap -a /dev/zvol/dsk/rpool/swap2
Regards,
Andrew

Hi Andrew,
After completing the steps above, you will need to add an entry for the new swap volume to the /etc/vfstab as described in this doc if you want the swap volume to be used when the system is rebooted:
Adjusting the Sizes of Your ZFS Swap and Dump Devices - Managing ZFS File Systems in Oracle® Solaris 11.2
Thanks, Cindy

How to make changes effect in log4j.xml without restarting weblogic server

Hi ,
I have successfully configured log4j in my weblogic server 8.1.
Everytime i made a change in log4j.xml i need to restart the server
is there any configuration or parameter to set without restarting server??
Thanks in advance,
CK

I don't think you need to restart the server, atleast I never needed to when making changes to jsp pages. You only need to restart when you make changes to java classes. Some might argue jsp is converted to servlet which is a java class.....
Try refreshing the page when you make any changes. This works for me, if it doesn't work try turning reloadable="true" in your context path in tomcat's server.xml

Oracle Database not open automatically on restarting the server

Hello,
I am using Oracle8i Release 8.1.6.0.0 - Production. And OS windows 2000.
I installed oracle 8i. On restarting the server the database is not up automatically.
I check the following services. All are in automatice mode.
ORACLETNSListerner
ORacleserviceSID
Oraclewebassistant.
I tried the following option also.
ORADIM -edit -sid -startmode auto.
still not working.
Anyone please suggest the solution for this.
Thanks & Regards
Krishna

Do you have any Antivirus installed in that server, sometimes antivirus blocks oracle autostart. try with uninstalling antivirus if it is .
Thanks

Instances In recovery are getting recovered only after restart of server.

Hi All,
The issue I face is :There is a BPEL Process with a DB adapter which has to poll on a database.
Now my DB adapter polls,but the instance in EM remains in Recovery State.
From BPEL Service Engine even if I recover,they dont get recovered.
But,If I restart the server(SOA) and and From BPEL Service Engine if I recover,they get recovered.
SO,every Time I hav to restart the server.:-( :-(
Kindly ,suggest the solution.

The solution is either change the order of deployment or copy the FileAdapter.rar file in $ORACLE_HOME/lib location and restart the server as mentioned here.
http://soa-bpel-esb.blogspot.com/2011/04/javalangnoclassdeffounderror.html

Do we need to restart admin server evertime we restart slapd process

Hi all !
For system stability Do we need to restart admin server evertime we restart slapd process ?
-

Recently i had some core dump file on my /var/core directory which is actually filling out the filesystem.
When i send core dump file to sun support they told there is a bug in Directory server BUG ID 4992815.
But to fix the core dump every time need to restart slapd process i need to restart the admin server.
It seems strange to me ...but if its how i can fix the dump then i need to follow thier instruction...
Just curious whether other people also following the same ...
Thank you for your response....

Deploying, ReDeploying JAR file to WebLogic EM without restarting the serve

Hi
Can any one help me how to re-deploy .jar file on weblogic EM with steps.
Deploying, ReDeploying JAR file to WebLogic EM without restarting the server
Appriciate if you provide information in steps with screenshot.
Note: Not in weblogic 11g console.
Thanks,
Phani

http://download.oracle.com/docs/cd/E14571_01/core.1111/e10105/deploy.htm#BIHIIEIA

Can we restart fms server from flex?

Hi,
I wanted to know whether we can start,stop restart fms server using flex code(actionscript).I actually came across API's StartServer() and StopServer().Can I use this for the purpose.If yes can you please give a sample code so that I can better understand the functionality.

HI ,
Its not possible DI server restrat Through B1WS.
Thanks
kalpen

MyServlet.init() not called when restarting my server

Hi everyone,
          I use Weblogic Server 9.1. I developed a Web Application that I packaged using the .war format. Some global settings are read from a configuration file in the init() method of a servlet called mypackage.MyServlet. In this servlet, the destroy() method is also overridden in order to release resources when servlet is dereferenced.
          In order to load the settings at webapp deployment, I added the following block in file WEB-INF/web.xml :
          <servlet>
          <servlet-name>init</servlet-name>
          <servlet-class>mypackage.MyServlet</servlet-class>
          <load-on-startup>100</load-on-startup>
          </servlet>
          When I use the following process :
          * stopping my deployment
          * updating the .war using "Update" button in "Deployments" menu
          * starting my deployment
          ... I can see in my log files that destroy() method then init() method have been called.
          In the other hand, when I stop then I start the server on which my webapp is deployed (using links "Environment" then "Servers" then "Control"), only the destroy() method of my servlet is called at server stop, but not the init() method when I start the server.
          - why is the init() method not executed in that case ?
          - what do I have to change in order for my configuration files to be reread when I restart my server ?
          Thanks for your help,
          FranÃ§ois

OK, I found my answer. Here's how to do it. Following 'jitu' on Apr 10, 06
import javax.annotation.Resource;
import javax.xml.ws.handler.MessageContext;
import javax.jws.WebService;
import javax.servlet.ServletContext;
@WebService
public class Hello {
@Resource
private WebServiceContext wsc;
@WebMethod
public String setValue( @WebParam String name) {
ServletContext sc = (ServletContext) wsc.getMessageContext().get(MessageContext.SERVLET_CONTEXT);
sc.setAttribute("SharedValues", name);
}This sequence gives me my servletContext, so I can proceed with my work, but for the record I'd really like to know why I had trouble with ServiceLifecycle, and how I might have made it work.

J2ee - Restarting specific server process

hi,
We have Central instance with 3 j2ee server processes running. One of the server process has issues, needs restart . I tried with SMICM and JCMON to restart only a specific server process. I could not try all options in production instance. Is it possible to restart only affected server process instead of entire j2ee server.?
This is needed as users may be using other 2 server processes anytime.
Visual admin does not show, this server process as it has issues.
Thanks,
Raj

Hi Raj,
You could restart a server process with JCMON.
Choose local instance and then choose restart a process and enter the id of the server node that you want to restart.
Regards,
Ventsi Tsachev

File shares not be re-created when restart the Server (Windows 2012 Std R2)

Hi Team,
We are facing below issue whenever restarting my server (windows 2012 R2 STD)
1. File shares are invisible.
2. Every time i need to restart server service to make file shares availability
Please look in to the above issue and revert if any suggestion.
Regards
K Sreenivasan

Hi,
According to your description, my understanding is that you create a file share under File and Storage Services but the file is invisible. If you restart the server make the file share, then you can see the file share.
Can you see the file share when you directly create in Windows Explorer? Please check if you have enabled ABE on the file share.
Access-based Enumeration
http://technet.microsoft.com/en-us/library/dd772681(v=ws.10).aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Restart of server

Similar Messages

Maybe you are looking for