Restart of services if port no in portlist.ini is changed

I had a doubt if any services need to be restarted if port no in portlist.ini is changed in an Oracle 10g/11g setup. For eg., the port no of EM which is 1158 may need to be changed.
I hope my query is clear whether the services need to be restarted if port no is changed in an Oracle 10g/11g setup.
Please revert with the reply to my query.
Regards

972145 wrote:
Thanks for your answer. I have few points:
1) I gather the ports in portlist.ini do not need to be changed to match the port change in the respective config. file. Is my understanding correct?
2) Please tell me how to deconfigure EM and configure it again.
RegardsSimilar questions in [url https://forums.oracle.com/forums/thread.jspa?threadID=2525639&tstart=0]this thread. See my replies there. portlist.ini is not what actually configures the services. that is done in either a .config or a .xml file, depending on the service and how its developers decided to do it. portlist.ini appears to be just an inventory of ports that have actually been used, so if a service is configured/reconfigured oracle will have a convenient way of knowing what is used and what is available.

Similar Messages

How to start or restarted Oracle_Secure_Backup service in RedHat linux

Hi
when i try to connect oracle secure backup using the following command, i am getting the follwoing message
[root@midevdb bin]# obtool
obtool: Error: can't connect to administrative observiced - observiced not running
so how i can start, stop and restart Oracle_Secure_Backup service in redhat linux.
thanks
Settu Gopal

the below is the logs from observiced.log log file.
2009/03/31.12:19:28 observiced version 10.2.0.3.0 (linux) -- Tue Sep 23 10:36:22 PDT 2008
Copyright (c) 1992, 2007, Oracle. All rights reserved. on midevdb.in.valtech.com pid 27248
2009/03/31.12:19:28 listening for requests on --
2009/03/31.12:19:28 virbr0 (192.168.122.1) port 400
2009/03/31.12:19:28 eth0 (192.168.140.22) port 400
2009/03/31.12:19:28 info: local host identity not readable or not yet established - no .hostid file
2009/03/31.12:19:28 listening for NDMP connections on --
2009/03/31.12:19:28 virbr0 (192.168.122.1) port 10000
2009/03/31.12:19:28 eth0 (192.168.140.22) port 10000
2009/03/31.12:27:04 failure to negotiate SSL connection with component obtool on fd 6 - no matching cipher suites (FSP Oracle network security functions)
Thanks
Settu Gopal

Allowing unprivileged users to restart print service

Howdy,
How would I add a user or group of users to be allowed to use server admin "Just" to restart the printer service, or otherwise admin the printer services. No other rights would be given to administer the server.
I assume there is a local group I can add their accounts to, but I'd rather use their open directory or active directory accounts.
Thank you for your attention,
Nate

Hi & welcome to the forums.
There is no Server Admin way to do whay you want afaiaa. So, this answer is a complete guess and may screw up your system.
There is a print group called lp in netinfo. If you can create a netinfo user called, say, PrintAdmin, and add it to the lp group, you may be able to give the PrintAdmin user access to the CUPS interface via port 631 using a web browser.
You will see this interface if you go http://localhost:631 while at your server. And, from this interface the PrintAdmin user may be able to to what you want.
But, this all begs the question, why do you need non-admins to restart a service?
hth,
b.

Turn off service and port

Hello
I am workstation user. I am new to Arch . I come from slackware, but i can´t figure out to turn service and port of in Arch
In Slackware I use the following comands:
Block off all in /etc/inetd.conf
Block off in /etc/services everything except
ssh 22/tcp #Secure Shell Login
ssh 22/udp #Secure Shell Login
syslog 514/udp
And then run the comand /etc/rc.d/rc.inetd restart
But /etc/inetd.conf and /etc/rc./rc.inetd don´t excist in Arch :?:
How do I use this in Arch Linux

carl wrote:
But /etc/inetd.conf and /etc/rc./rc.inetd don´t excist in Arch :?:
How do I use this in Arch Linux
Arch uses xinetd by default.
EDIT:
Oh, and you don't have to block anything if you didn't enable xinetd in your /etc/rc.conf DAEMONS line. If you did enable it just edit xinted config like you did with inetd. I guess you can also restart xinetd with /etc/rc.d/xinetd restart.
More info:
http://www.archlinux.org/news.php?skip=90
http://bbs.archlinux.org/viewtopic.php? … netd+inetd
Also check other daemons that may be running without xinetd with open ports. Disable everything you don't need in rc.conf and/or configure daemons' configs or use iptables to restrict access. There is a lot of info out there in the forums and google of course.

After restarting the Services, Foundation service is not starting

Hi All,
Recently, i have applied patch and restarted the services, later found that foundation services is not starting. I have referred the logs and it showing below error.
<Apr 29, 2015 7:45:30 PM PDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.0-79-146777-1.6.0_29-20111005-1808-windows-x86_64 from Oracle Corporation>
<Apr 29, 2015 7:45:31 PM PDT> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {AES}9e8e9w8ADkG/3Hx33gkE9Ukm29IxHIISKLeLw/FYfxTO0GcnA= from the file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException.>
Enter username to boot WebLogic server:
I have logged to Weblogic server and checked, the foundation service is not started.
We dont have the backup of installation folder.
I manually edited the user name and password and started the services, but no luck.
Do any one idea about processBootProperties.cmd, shall i trigger it to get the new boot.properties.
Please suggest.
Thanks

Hi all,
I manually enter the credential for the Web logic server and started the services. It worked out.
I did the same first, but i did some typo error in credential, it killed me for more that 1 hour... ):
Thanks

Restart Systemd service after laptop resume

Hi!
After resume my laptop (from suspend, I've no tried hibernation) I need to restart NetworkManager service. How can I do this automaticaly?, I've searched in google and Systemd documentation but I have not a clear idea about how to do it.
thanks

Gazpacho wrote:
lucke wrote:As boast said, you can make pm-utils run "systemctl restart networkmanager.service" after resume for you. https://wiki.archlinux.org/index.php/Pm … _own_hooks
Sorry (to boast too), you are right. I've read the wiki and created a hook, now NM restarts after resume. Thanks!
And now I've discovered that my computer only suspends the first time. Second time nothing happens when I close the tap, execute pm-suspend or the KDE menu option suspend to ram
If you have any idea it is welcome. If not I will mark the thread as solved in a couple of days and search in forums and wiki.
this usually happens when your hook doesn't exit. pm-suspend never finishes because it's waiting for the hook to exit and the second pm-suspend will block until the other pm-suspend is finished. Please post your hook.

Restart Network services

I hope this isn't a repost but I was wondering if there is a way to restart network services in leopard, similar to this command in linux:
/etc/init.d/networking restart
I want to troubleshoot my connection to the router in my home, and my linux install works after giving this command, but leopard is having trouble.
Thanks
hah nevermind I found what I need
Message was edited by: Dak

Try this
$ sudo ifconfig en0 down
$ sudo ifconfig en0 up
Use en1 for your AirPort card

When to restart the services OC4J_BI_FORMS & HTTP_SERVER

During the deployment of our application on the 10G application server, we generally make entries in the following files:
1) Default. 2) fmrweb.res 3) forms90 4) formsweb and 5) registry files.
but i am not sure changes into which files needs me to restart the
1)OC4J_BI_FORMS
2) HTTP_SERVER.
as of now i am just restarting these services whenever i make any changes in formsweb file.

As I only can see that you made changes to Forms files, then you only need to restart the OC4J_BI_FORMS for the files mentioned:
opmnctl restartproc ias-component=OC4J_BI_FORMSHowever, most changes in formsweb.cfg doesn´t need a restart.
Regards,
Martin

Regarding restart of services

Hi Frnds,
Can i know what is the sequence to restart the services i.e services like open ldap,Shared services,analytic services,administration services and also the sequence to shut down/restart.
Thanks,
KRK.

Hi,
Following is the sequence to start Hyperion product services: -
1. Databases for repositories. (SQL Server, DB2, Oracle)
2. Shared Services OpenLDAP
3. Shared Services application server
4. Reporting and Analysis Core Services
5. Performance Management Architect Services
6. Oracle's Hyperion® Essbase® – System 9
7. Administration Services application server
8. Oracle's Essbase® Integration Services
9. Provider Services application server
10. Reporting and Analysis (in the following order):
a. Oracle's Hyperion® Interactive Reporting – System 9
b. Financial Reporting
c. Reporting and Analysis Web server
d. Workspace application server
e. Oracle's Hyperion® Web Analysis – System 9 application server
11. Application server services or processes (in any order):
● Performance Management Architect application server
● Performance Management Architect Data Synchronizer application server
● Financial Reporting application server
12. Remaining services (in any order):
● Planning application server
● Financial Management
● Oracle's Hyperion® Strategic Finance
● Performance Scorecard application server
● Performance Scorecard Alerter application server
● Data Relationship Management
● FDM
● Oracle's Hyperion® Data Integration Management
● Oracle's Hyperion® Translation Manager
Just do the reverse of it shut down services.
Hope it answers you.
Atul K,
Edited by: Atul Kushwaha on May 5, 2009 10:44 PM

Remote Restart of Services (with dependencies)

Hello all,
i've a short question about restarting a service on a remote machine with powerhell.
I've tried the following:
get-service -computername ServerXY -name ServiceXY | Set-Service -Status stopped
And it works like a charm. But some services have dependencies. For example DFSR:
PS C:\Windows\system32> get-service -ComputerName ServerXY -name dfsr | Set-Service -Status Stopped
Set-Service : Cannot stop service 'DFS Replication (dfsr)' because it is dependent on other services.
At line:1 char:51
+ get-service -ComputerName ServerXY -name dfsr | Set-Service -Status Stopped
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (System.ServiceProcess.ServiceController:ServiceController) [Set-Servi
ce], ServiceCommandException
+ FullyQualifiedErrorId : ServiceIsDependentOnNoForce,Microsoft.PowerShell.Commands.SetServiceCommand
Is there a possiblity to restart services with dependencies remote, too?
Regards, Heyko

Instead of Set-Service, use the Stop-Service cmdlet with the -Force parameter in order to stop services that have dependencies. If you want to restart the service, as you've mentioned, then pipe you Get-Service command to the Restart-Service cmdlet. This
cmdlet will also take the -Force parameter, allowing services to restart even when there are dependent services.
Update: Added info about the Restart-Service cmdlet.

Restart Data Services 3.2 fails

I can not access trace log, monitor log and error log files. Every time accessing through links I get a time out error. The Server is available and accessible. I just tried to restart the BusinessObjects Data Service - Server through the BO-DS-Servermanager. This has not worked. I can not restart the service "BusinessObjects Data Services".
This Error occures : Error 1053: The service did not respond to the start or control request in a timely fashion"
This happened sometime last months. When I restart the server then all is ok again.
How can I restart the service without reboot?

Hello,
1. What is the version of the Microsoft .NET Framework? (Control Panel > Add/Remove Programs).
2. What is the error message in Event Viewer (Start > Run > eventvwr.msc)?
3. What user run this service (Start > Run > services.msc > Business Objects Data Services > Properties > Log On tab)?
4. Is Data Execution Prevention disabled? (My Computer > Properties > Advanced > Performance > Settings > Data Execution Prevention tab)?
Thank you,
Viacheslav.

Scheduled webi reports fail, why? If I restart BO services they work again

Hello.
I'm having a problem with my scheduled Webi reports and I don't know what is causing it. I have some reports scheduled to run at 8:00 am, and are supposed to be sent to a determined e-mail. Last week it worked well and the reports were sent to their destination successfuly, then this week the same reports didn't reach their destination. I verified in the History option and all of them showed a Failed status. I checked the detail and this is what it shows:
Unexpected exception caught. Reason: [java.lang.NullPointerException: i_statusInfo is null.]
If I try to reschedule these reports or any other report or a new report I get the same error. The only way I can make the schedule option work again for my webi reports is restarting BusinessObjects services.
But I guess this is not the right solution.
What can I do? How can I determine what is causing my scheduled webi reports fail?
What does this java.lang.NullPointerException: i_statusInfo is null message mean?
Is there a way I could track the service that is failing? which BO service is the service that manage the Schedule reports?
Any help is welcome.
Edited by: Erika Atencio on Sep 1, 2010 6:27 PM

>
Efstratios Karaivazoglou wrote:
> Which version of BOBJ (incl. SP and FP) are you using?
>
> Regards,
>
> Stratos
BusinessObjects XI 3.1 SP2
FixPack 2.6
Edited by: Erika Atencio on Sep 1, 2010 8:46 PM

How to manually restart a service

systemuiserver hung up on me recently and after forcing it to quick in activity monitor, I could not figure out how to restart the service. I'm new to mac from windows, where I would just go to where the services are listen and click restart. I did try blindly using 'launchctl start systemuiserver', but it didn't find the tag systemuiserver. And i tried 'launchctl com.apple.systemuiserver' but that tag wasnt found either.
Any ideas on how to restart a service without having to reboot?
Thanks!

What does the array contain? Objects or strings?
Post some code... it might help!

How to restart OracleXe service in windowsXP?

how to restart OracleXe service in windowsXP?
by sample for restart: mysql:
service mysql restart
OracleXE howto?
thanks

go to
Start > Settings > Control Panel > Administrative Tools > Services
Look for the Oracle Database Service. If I remember correctly, it's something like Ora<Instance_name>.
Hit the Restart button, it's the button with the icon that's a stop and start.

How to run Indesign CS3 as a Service with Port number

Hello all,
I would like to run the InDesign CS3 Server as a service on Windows. It seems that after installing the Server it automatically installs as a service. But where can I assign the port number. If under Services properties of InDesign Server under Parameters I mention -port 1050 on Ok button it removes the parameter information.
I am doing right or is there some other way to start the Server as Service with Port number.
Thank you all in advance.
Regards
Farzana.

Hi Sascha,
have you tried to remove the service and install it manually?
\"Path to IDS"\InDesignServerService /install /u
\"Path to IDS"\InDesignServerService /install
I guess you've tried to start the instance in the console already (successfully?).
Regards
Ingo
Am 05.07.2011 um 12:18 schrieb 1000grad_Sascha:
Hi Ingo,
I've installed the Snap-In and configured one instance. Maybe it's worth mentioning that there are some instances running at the same time, which have been started using the console. Hope that's not interfering. However, the MMC-configured instance uses a different port.
I tried to start the service with a huge range of users having all imaginable privileges. The common way of using either "LocalService" or the Local System Account (which has admin rights for me) doesn't do the job.
cheers,
Sascha
>

Restart of services if port no in portlist.ini is changed

Similar Messages

Maybe you are looking for