Restart on primary database restarts the recovery process on standby
We have a dataguar broker configuration running in maximum perfromance mode.
Every time we start the primary database, the recovery process on standby gets restarted.
I can consistently reproduce teh problem. Looks like expected behaviour.
Even if standby is in read only mode and restart the primary database it bring the database back in recovery mode.
Any explanation why oracle needs to do it?
Neil_Arul wrote:
We have a dataguar broker configuration running in maximum perfromance mode.
Every time we start the primary database, the recovery process on standby gets restarted.
I can consistently reproduce teh problem. Looks like expected behaviour.
Even if standby is in read only mode and restart the primary database it bring the database back in recovery mode.
Any explanation why oracle needs to do it?Yes, When you enable broker it very common behaviour.
When ever you bounce the database also MRP process will be started automatically.
By disabling broker you can avoid automatic startup, BTW Standby should be in recovery mode, i think no need to worry on this.
If you want to disable as per time, you can disable it as below
ALTER SYSTEM SET DG_BROKER_START=FALSE ;
Total Questions: 3 (3 unresolved)
Close the threads when you feel its answered, Keep the forum clean.
Edited by: CKPT on Feb 15, 2012 12:57 PM
Similar Messages
-
How to restart the Successfully processed messages
Hi,
I have IDOC to File Scenario
we posted the idoc from R/3 and it has processed successfully.
Now again i want to process that idoc again with out going to R/3.
How to restart the Successfully processed message from MONI.
we have one option in MONI Restart. this is not working for Successfully processed messages.
How to achieve this
Regards
SumanHello Suman..
XI: Restarting successfully processed messages..
Go through this : Michal Krawczyk Blog This will really helpful to you..
/people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messages
Reward Points If it is Helpful...
Thanks,
Satya Kumar.. -
I just bought a new macbook air and while transferring documents from my old computer to my new one it stopped working, how do I restart the transferring process (it won't force quit on the new one)?
I NEED HELPjesster03 wrote:
i just bought a new macbook w/ mtn lion. when i transferred data from my old macbook over, it created another user name (i called it "old computer"). That's actually good
That's actually bad. Peruse Pondini's Setup New Mac guide and seriously consider starting over. -
How do I restart the downloading process?
My computer is stating that the disk image is failing to mount and error 105 is occuring. Will restarting the downloading process help? If so, how do I restart it?
Please try the steps listed at http://forums.adobe.com/thread/1012592 they should be relevant to your difficulties as well.
-
So, 8 days ago we decided to subscribe to iTunes Match. It's been trying to sync ever since (i.e. it gets half way through step 2 and then restarts the whole process again). Any idea as to why it's doing this? Any ideas as to what we can do to fix this?
sounds like you may just want to re-match your library.
easiest way to do so if it never finished it to turn iTunes match off, then back on (and add this computer). that will analyze your library once more and upload or match any songs that need to be.
Store > Turn off iTunes Match
then
Store > Turn on iTunes Match -
dont have a passcode. went through the recovery process and ipad is still asking for passcode?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?
That's usually a symptom of a phone that was hacked or jailbroken to unlock it.
-
Facing an error while restarting the services : Process Manager is not initialized.
while setting up the MDM environment I somehow messed up all the database connections.
Now im unable to start or stop the services properly.
Below is the error shown in the event viewer log for process MDM Ntier Process manager :
The description for Event ID ( 3 ) in Source ( MDM NTier Process Manager ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Exception Emdm_Exception with message 'Process Manager is not initialized.'.
Kindly help
I suspect this is because incorrect password for Engine login MDM_SYSTEM or incorrect configuration file (config.xml), However i may be wrong.As far as the "Process Manager is not initialized" error is concerned, we got the same error recently.
What we did was restart the DRM services on the server - The N-Tier Client and the Web-Publisher.
However, after doing it - we still got the error or DRM would not respond. On looking through it again, we saw that the Task Manager on the Server did not kill the DRM processes and so we did it manually. Then we restarted the services and it worked fine this time. See if this works for you - first kill all the services on the client sides and then on the server side, check for the client and server side process task manager and then restart the service. This worked for us, hopefully it works for you too.
-- Adi -
How can I restart the conversion process?
When I installed I-tunes the program started converting my WMA files to the AAC format. I let it run all day but at the end of the day I had to shut down the computer, so I stopped the process figuring it would restart when I restarted the program the next day. It does not do that. The only way I can find to do the conversion is one album at a time. Is there a way to restart the automatic conversion process?
Compaq Presario v5000 Windows XPI don't know of an automated way to do it, but it is easy enough to do it yourself in one large batch. Note I use a Mac version of iTunes and still use iTunes6, but the following should be more or less the same anyway.
Right click the headings in your library and you will get a pop up of all the different headings. Turn on "Type" by checking it. Type is a column showing the encoding method (e.g. AAC, MP3, AIFF, WAV, etc.). Now you can click on this heading to sort your library by encoded Type. So now all the WAV files should be grouped together. You can now easily select the entire batch of WAV files, right click, and pick "Convert to xxx" where xxx is the encoder type you currently have set in your preferences for importing files. So if it is not in the format you want, go to preferences and change it. Once you pick the Convert function it will convert all the selected files to the new format.
Note that converting makes a copy leaving the original in place. So the other advantage of having the ability to sort and select a large number of files by Type is that you can also select all the WAV files to delete in one step after you have converted them all.
Patrick -
Exchange Server 2010 SP3 Databases are not mounting after the recovery process
Hi,
We are using Exchange server 2010 SP3 in our office. Databases are stored in an ISCSI drive mapped with the exchange. We are taking daily full backup of my Exchange server using Symantec Backup exe 2012. As a testing purpose I created a test environment
same like my existing live environment to check the disaster recovery and backup. Thankfully disaster recovery worked well and I am able to open the exchange management console and powershell. But I am not able to mount the recovered databases ending
with an error saying "Couldn't mount the database that you specified. Specified database: officialrecover; Error code:
An Active Manager operation failed.........." and even I am not able to use the utility eseutil.exe to the database with an error "access to source database failed with jet error 1811". I am able to create a new database and mount
it.
I am using Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 in the Live environment with 3 partitions called C (279 GB), E (4.46 TB, ISCSI), F (976 GB) in my Live environment.
For test it is Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 with 3 partitions C (240 GB), E (1.4 TB), & F (240 GB).
Please help me with your valid comments to solve and mount the database and close the issue for ever.
With Regards
JayJared is correct that in essence the message is saying the DB cannot be found.
When you restored to your recovery server are all the paths the same, i.e. if the DB existed on E:\XYZ on the production server it must be the same on the recovery server
When you restored into the recovery site do you have AD restored into that site as well?
For the recovery server are you using iSCSI storage for it as well? If so am I correct to assume that you have copies of the databases just for use on this server and are not trying to reference the same instance of the DB from the production
and test/recovery server?
I have also seen an issue where DB's getting written to disk from Symantec mess up the header of the DB. If you want to validate that the DB is actually intact and accessible you might want to check out our DigiScope product
http://www.lucid8.com/product/digiscope.asp using a free DEMO license. If it works i.e. you are able to mount in DigiScope from same location where its failing on the recovery server we know the
DB your pointing at is good and accessible from the current path but something else is amiss in your configuration
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope -
Start recovery process on standby database after Windows reboot
Hi all,
I have a data guard configuration on Oracle 10.2.0.4 for Windows.
What I need is to mount and start recovery process automatically after Windows Server restart.
How can I do that ?
Thanks in advance.Here's what I found :
sleep 60
REM Start the database
%ORACLE_HOME%\bin\sqlplus -s "/ as sysdba" @startup.sql
exit
startupmount.sql -- Copy this under ORACLE_HOME/bin directory
-- start the database
startup mount
alter database recover managed standby database disconnect from session;
exitSorry, no way to test on my end.
The other thought is to hack oradim
But I'm thinking this might only do the startup mount.
Best Regards
mseberg
Edited by: mseberg on Feb 15, 2012 1:10 PM
This would need some work but it may help
@echo off
sc query "OracleOraDb11g_home1TNSListener" | findstr /i running
IF "%ERRORLEVEL%"=="0" (GOTO :RUNNING) ELSE (GOTO :STOPPED)
:STOPPED
ECHO NOT RUNNING
net start "OracleOraDb11g_home1TNSListener" | sc query "OracleServiceSCT" | findstr /i running | if NOT "%errorlevel%"=="0" net start oracleservicesct
GOTO :END
:RUNNING
ECHO RUNNING
net stop "OracleOraDb11g_home1TNSListener" | sc query "OracleServiceSCT" | findstr /i running | if "%errorlevel%"=="0" net stop oracleservicesct
GOTO :END
:ENDEdited by: mseberg on Feb 15, 2012 1:17 PM -
When i insert my recovery disk from hp nothing comes up to start the recovery process
i just got the three windows 7 recovery disks from hp in mail(application and driver recovery dvd, and the two system recovery dvds) and when i put first system recovery disk in nothing comes up for me to start recovery what can i do
Hi:
When you boot from the DVD drive with disk 1 in the DVD-ROM drive, nothing happens?
You need to restart the PC, and at the HP welcome screen, tap the F9 key to get the boot menu. You then select the DVD-Rom to boot from and then follow the on screen prompts and instructions.
Paul -
Boot selection fails before the recovery process begins
HP Pavilion DV6 QJ926AV#ABA
Windows 7 64-bit
I'm trying to use the recovery feature on my two month old laptop, but, I'm already running into an issue with the recovery fuction. When ever I try to restore the laptop to the factory settings I get an error msg after it restarts, stating this:
Status: 0xc0000225
Info: Boot selection failed because a required device is inaccessible
For whatever reasons the boot manager isn't working. Seeing how this is a brand new laptop, I hope that I wont have to pay for a recovery disk if I have a faulty computer.Does it still boot into Windows OK?
If it does, make your own recovery disc set,
in the search bar on the Start Menu type: Recovery
then run the HP Recovery Manager program to make your discs, then use thoise discs to recover the notebook.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01895783#WhenCreate
If you cannot boot into Windows, then call HP and request a free set of discs since you cannot use the recovery partition or get into Windows, they should wave the fee for you. -
Number of parallel recovery processes in standby
Hi,
How to find the number of parallel recovery processes that the standby is started with..MRP parallel???user13179227 wrote:
Hi,
How to find the number of parallel recovery processes
that the standby is started with..MRP parallel???what is "MRP parallel"? -
Field changes restart the reviewer process
Hi
Is it possible to configure the Change Management system, so that if a Change Record has been approved, and the Initiator then changes the scheduled start/finish date/time, then the approvals are reset and the CR has to be re-approved ?
Thanks
RobBacically this is possible in the SCSM console. You can use the "Return to Activity" task.
You can also use a SCSM workflow and PowerShell to automate this (get all activities -> modify status of Review Activity to "In Progress", set alll other activities after the Review Activity on status "Pending").
Or use an Orchestrator runbook for automation.
Andreas Baumgarten | H&D International Group
Maybe you are looking for
-
BW: Transaction Key in 2LIS_02_ITM
Hi , In the datasource for Purchasing 2LIS_02_ITM and it is also there in the Schedule line item 2LIS_02_SCL, there is a field called BW: Transaction Key mapped to BWVORG in R/3. It looks to me, that it provides information about, whether it is a inv
-
Has anyone been able to turn off mirroring successfully while streaming netflix feed through ipad to view on tv. With the new netflix update I receive a message to turn off mirroring in control panel, but I am not seeing a direct way to turn it off
-
FD32 Credit management 'sales value'
I am on SAP ERP, I'm trying to figure out how to pull the data that makes up the credit exposure - 'SALES VALUE.' I believe the sale value includes all undelivered or only partially delivered orders. I can not find a way to confirm what makes up th
-
Hi - I am using a 3.4Ghz Core i7 Imac with 24GB of RAm running Mavericks. Internet connection is through a Time capsule and a Vigor modem. iWeb is version 3.04. I have a hosted website which I update regularly - the site is at www.mountain-rats.co.
-
Project system configuration notes
Dear all, send me project system config notes Point will be assined venkat1233atgmail.com