Restart request and green and gray stripes on screen, impossible to run
Hi.
My MacBook does not start correctly. I immediately get the "you need to restart your computer message on a screen that is covered by green and grey stripes vertically. One issue I had recently is that I got close to the limit of the harddrive (1 GB space left).
Thanks
Welcome to Apple Discussions!
1 GB is not enough free space--you are in danger of a crash and losing everything. Here is a link for doing that:
http://www.thexlab.com/faqs/freeingspace.html
It sounds like you are experiencing a kernel panic. Here is an article that might be helpful:
http://www.thexlab.com/faqs/kernelpanics.html
Do you have a good up to date backup? If not, you need to make one before it is too late.
Good luck!
Similar Messages
-
Sapmmc - jstart.exe keeps restarting, switching between green and yellow
Hi Friends,
I installed the SAP core server ( as part of SAP convergent charging) , but jstart.exe and dispatcher-1 process in sapmmc are noticed keep switching between yellow and green. when the jstart.exe turns green (all process running) , dispatcher-1 turns yellow (waiting to start) and when dispatcher-1 turns green (restart-yes) , jstart.exe turns yellow (some processes running). Only for a small duration , they both remain green (may be during transition).
Trace File is as below: Iam not sure as what is missing here to be installed, as it is complaining about JEE directory in
C:\usr\sap\C06\CCD09\j2ee\cluster\bin, which is not present., which was never installed as part of the installation.
trc file: "dev_jstart.new", trc level: 1, release: "711"
sysno 09
sid C06
systemid 562 (PC with Windows NT)
relno 7110
patchlevel 0
patchno 92
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile C:\usr\sap\C06\SYS\profile\C06_CCD09_W2K8-Sap-01
pid 3596
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
Wed Oct 26 04:53:47 2011
trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\C06\CCD09\exe\jstart.EXE
arg[ 1] : pf=C:\usr\sap\C06\SYS\profile\C06_CCD09_W2K8-Sap-01
trc file: "C:\usr\sap\C06\CCD09\work\dev_jstart", trc level: 1, release: "711"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
F
F [Thr 3600] Wed Oct 26 04:53:47 2011
F [Thr 3600] *** ERROR => SfCheckJeeVersion: Cannot find JEE binary directory C:\usr\sap\C06\CCD09\j2ee\cluster\bin. [sfxxmain.cpp 848]
trc file: "C:\usr\sap\C06\CCD09\work\dev_jstart", trc level: 1, release: "711"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
F [Thr 3600] *** ERROR => SfCheckJeeVersion: Cannot find JEE application directory C:\usr\sap\C06\CCD09\j2ee\cluster\apps. [sfxxmain.cpp 857]
F ********************************************************************************
F Java environment properties (C:\usr\sap\C06\CCD09\work\jstart.jvm)
F root directory : C:\usr\sap\C06\CCD09\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_24
F cpu : amd64
F java vm type : server
F java vm version : 6.1.027 1.6-b07
F jvm library name : jvm.dll
F library path : C:\usr\sap\C06\CCD09\exe\sapjvm_6\jre\bin\server;C:\usr\sap\C06\CCD09\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\C06\CCD09\exe\sapjvm_6\bin
F ********************************************************************************
F SAP extensions : available
F ********************************************************************************
I [Thr 3600] MtxInit: 30002 0 2
dispatcher trace
trc file: "C:\usr\sap\C06\CCD09\work\dev_dispatcher-1", trc level: 1, release: "711"
sysno 09
sid C06
systemid 562 (PC with Windows NT)
relno 7110
patchlevel 0
patchno 92
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile C:\usr\sap\C06\SYS\profile\C06_CCD09_W2K8-Sap-01
pid 428
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
Wed Oct 26 06:22:16 2011
trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\C06\CCD09\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=0
arg[ 3] : pf=C:\usr\sap\C06\SYS\profile\C06_CCD09_W2K8-Sap-01
arg[ 4] : -hostvm
arg[ 5] : -nodeName=dispatcher-1
arg[ 6] : -file=C:\usr\sap\C06\CCD09\config\jstart.config
arg[ 7] : -jvmFile=C:\usr\sap\C06\CCD09\work\jstart.jvm
arg[ 8] : -traceFile=C:\usr\sap\C06\CCD09\work\dev_dispatcher-1
arg[ 9] : -javaOutFile=C:\usr\sap\C06\CCD09\work\jvm_dispatcher-1.out
F
F Wed Oct 26 06:22:16 2011
F ********************************************************************************
F Java environment properties
F root directory : C:\usr\sap\C06\CCD09\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_24
F cpu : amd64
F java vm type : server
F java vm version : 6.1.027 1.6-b07
F jvm library name : jvm.dll
F library path : C:\usr\sap\C06\CCD09\exe\sapjvm_6\jre\bin\server;C:\usr\sap\C06\CCD09\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\C06\CCD09\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 3828] MtxInit: 10000 0 2
M [Thr 3828] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=202;cur=2048)
M [Thr 3828] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 3828] CCMS: Initalized shared memory of size 60000000 for monitoring segment.
M [Thr 3828] CCMS: Checking Downtime Configuration of Monitoring Segment.
M
M [Thr 3828] Wed Oct 26 06:22:17 2011
M [Thr 3828] CCMS: AlMsUpload called by wp 1004.
M [Thr 3828] CCMS: AlMsUpload failed for C:\usr\sap\C06\CCD09\log\ALMTTREE.DAT.
M [Thr 3828] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
Please help.
Thanks.
Edited by: Zain Ahmed on Oct 26, 2011 9:07 PMHI,
Import the SAP profiles in SAP transaction RZ10: Utilities - Import profiles - of Active Server
OR
Check what messages do you have in jvm_server0.out, dev_server0.out and bootstrap traces,
also have a look at the note 142100.
The first problem is that in the SCS instance there are no running enqueue server as its starting line have no line break at the end in the start profile. Without this NT cannot parse the line. After adding the line break the enqueue server could start.
The second problem is that in the global dispatcher configuration for the LockingManager the en.port was set to 3201 instead of 3200 (which is correct as the SCS instance has the intance number 00).
After correcting these problems the J2EE engine could be started fine.
see similar threads
Dispatcher - Running but Dialog Queue info unavailable
/thread/96588 [original link is broken]
logon710
Message server not starting
Thanks
Swarup -
Blue and Green horizontal lines on my screen
I have the 2008 version of the MacBook Pro with the 15 inch screen. While using it last night I suddenly started seeing blue and green horizontal pixelated lines going across my screen. The first time it did it, I rebooted my laptop and it was fine for a while but then they came back. This morning when I turned it on, the lines were still there. I have no sort of warranty on this computer anymore. This is actually a computer I recieved from school back in 2008. Is this a sign my screen is going out?
Hello tattooedbeauty,
Thank you for the details of the issue you are experiencing with your MacBook Pro display. I would be concerned as well if I were seeing blue and green horizontal lines.
I found an article with steps to troubleshoot issues with displays. This article is for internal and external displays, so you can skip any steps referring to an external display. I recommend reviewing the full article, but this step specifically stands out to me:
Reset the system
You can reset the Mac's parameter RAM and SMC.
You can find the full article here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
I have red and green vertical lines on my screen
I have two red and one green thin vertical lines on the screen of my iMac. Is there anything I can do or do I need a new graphics card, or God forbid a new screen?
What model iMac? Could be a failing video card but maybe not. Is it that way on every screen, startup to shutdown, any time the screen is lit?
Do you have an AASP nearby? Time to have an estimate made. Fixing it will likely be very expensive. -
help!!!
Unless you purchased the optional AppleCare+ extended warranty,
Apple will exchange your iPod for a refurbished one for (USA) $99 for 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
I have an Ipad 3. I bought this 2-3years ago and this was working great until yesterday. All of the sudden, I noticed a flickering gray/white strip across the screen. It did not go away despite turning off the Ipad and restarting and resetting.
Is this a hardware issue and shoudl I take this to my local Apple store or is there something else I can try.
Thanks.Sounds like a hardware issue which can not be corrected by anything other than a trip to the store for a replacement.
-
Need help: my Ibook fell and can't get up! (screen dim, have run tests)
Cross posted from displays, but I have found it is not a "display" issue:
(also, not quite sure where this should "go", mods feel free to move to a more appropriate forum)
First: I have searched and tried several things...
OK, I took a fall commuting on my bike and my poor Ibook, nestled away it its laptop holder in my backpack, suffered the consequences (not to mention the road rash on my elbow and knee- but that is for a different forum).
When I pulled it out I found that the lid does not close securely. Then when I opened it I found the issue of the text being white and background as very dark. After some searching I found this to be the nocturnal mode and switched it off.
Then the problem was that the display was VERY dim. I can use the machine but it is like using it on the (near) lowest brightness setting. I hooked the machine up to the projector unit in a classroom and it projects the same as the display. So, its not an issue with the display itself (me thinks).
I tried to do a PMU reset (shift, control, option, power) and it seems to have done nothing.
Are there other ideas? Next steps. I can cope with the computer like this as it is generally my writing machine, but a fix would be nice. Also, I am concerned about whether or not it may be a logic board problem flesh wound which is waiting to one day die on me. I am doing backups often just in case...
Any help would be great.
Edit Update:
Everything has worked as normal except the display for the past 2 weeks.
I ran the Hardware Test Diagnostic Disc and NO issues were found, everything passed.
As there are no hardware issues found I am considering backing up and reformatting to see if this may do the trick.
Really any help would help. I am tentative paying for a fix as I bought it four years ago from apple refurb site for $700 and if it needs a pro fix I would consider putting the money into a new machine.
Thanks!
Message was edited by: Keith MartelActually, I don't think it could be the backlight because I can see the contents of the display without a flashlight. In fact indoors I can still see it well enough as long as the room is dim. And I can still back the brightness off a bit with the brightness adjustment button (F1).
-
My iphone 4s' screen is broken. I haven't dropped it or anything, or else it must've shown through its physical appearance. It just went into hazy white and green and now i cannot use it. Can i have a replacement for it? Thanks
Apple doesn't replace the screen, they replace the entire phone. If you've tried the basics (restart, reset, restore from backup, restore as new) and your screen is still broken, bring it to Apple for replacement. If you're not in the warranty period, you will pay $199 for the replacement.
-
My start up screen (the one with the apple) is lime green and all screens are pink and green. Some parts of screen still have white. It happened suddenly. What is this?
Hey there,
Thank you for your question. It sounds like you are seeing some graphical issues when you boot your iPad at the Apple logo. I had a couple of recomendations for you to try. First, reset your iPad:
Reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
From: Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
You can also try backing up the phone to iTunes and then restoring from that backup as well with this article to help determine if the issue is software or hardware related:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Apple TV 1G black screen or green and violet colors please help me
Hi, I have an apple tv 1G and from one day to another is not black screen, the strange thing is that on another monitor "HP w2207" looks good. But I've tested Sony LED TV, LG, .... and does not work in some apple when starting out and color is violet and green and looks bad but does not exit the main menu. I've reinstalled the factory, I tried to change resolution I miss everything but nothing. I'm desperate please help me
I also periodically have this purple/green color showing on the screen when I turn on and sometimes it happens when I turn on Directv so not an Apple TV issue. I believe in my case it is the HDMI cable/port causing it. But it corrects and gives normal picture if I turn off the tv and all devices and turn all on again.
-
IPhone 5 screen went green and blue and then faded to black?
I was on my iphone and had messages open and than the screen just froze and turned blue and green and than slowly faded to black and now won't turn on. When i plug it into the wall it doesn't do anything. The phone is still on because my dad called the phone and it still rings. It has a glow to it too when it is in the dark so the screen must be on or something, i don't know. Any help please!!
See Here for > Frozen or unresponsive iPhone
Try this First... No Data will be Lost...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
Hi, I have had my ipad3 for only 2months and have now had this problem 3 times. The battery is fully charged to 100% and when I try to switch it on the slider screen appears as normal, it only stays on for a short time then a small circle appears and the ipad switches off.
Eventually it switches itself back on, then continues to switch off and on again.
When the screen opens it runs very slowly and I cant open anything before it closes down again.
Today this has been happening constantly, and have not able to use it as I could not get it to stay on for any length of time, very frustrating!
I plugged it back in to recharge again and was able to eventually press both buttons to reset it again. It now seems to be working ok again.
Can anyone tell me if thay have had the same problems, or is this a faulty ipad?
Its the first Apple product Ive owned so dont know if this is a common problem or not, be grateful for any info on this, thanksNot normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
Gray Start Up Screen Circle With Line Through It
so i am starting up my macbook, and on the gray start up screen there is a circle with a line through it, and i dont have any idea what that means...
i recently got a new hard drive put in it, and since then its been pretty darn slow, and i cant do certain things like use safari because it is too slow and freezes up.... and then when i restarted it this happened...
i dont know what to do and what this means.
Thanks
Randiwell that kinda helps... but after i try everything that i can do at the moment, the its says to go to the apple menu, but there is no apple menu that i can get to.. so this only helps to a point... i guess i will have to go waste my money at best buy with the geek squad lol...
if anyone has any help...
pleasseee help me!!! -
I updated my iMac to 10.7.3 and about an hour later the screen began to flicker with a gray line on the upper side, and it also flicker green and red small pixel lines all over the screen, mainly green. The computer froze with these pixels, so I shut it off and restarted it, and there were this green lines everywere. So I turned it off, and the next day I turned it on and it began to work just fine, but suddenly the same thing happened again, and when I restart the computer again there are these green and some red pixels everywere.
I've read 10.7.3 is giving people many problems, but I never saw that it gave one like this. How can I fix this, or what will Apple do to fix this problem they caused me with their update.
ThanksContact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.
-
My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective.
Maybe you are looking for
-
I cannot disconnect from external hard drives because firefox is using the drive. I really don't like this. Aside from being intrusive and inconvenient it seems spywarish or just plain data mining.
-
Error while starting data loading on InfoPackage
Hi everybody, I'm new at SAP BW and I'm working in the "Step-By-Step: From Data Model to the BI Application in the web" document from SAP. I'm having a problem at the (Chapter 9 in the item c - Starting Data Load Immediately). If anyone can help me:
-
Document Class not work when I shift my MovieClip to 2nd Frame.
Hello, All my content is at 1st frame of my FLA file...and I'm using Document Class... When I try to shift my content to 2nd frame, so I can use 1st frame for preloader.. but its not working... This is my document class... Basically at 1st frame I'm
-
How to capture the data if i am using two Fiscal year variant
Hi My client is required need two type financial statement one is as per company act and calender year. Other one is company act and fiscal year. regarding we have maintain two fiscal year variant one is assigned to company code as per calender yr o
-
Need help regarding the few clarification in writing cmod
Hi All, I need to write a cmod by creating a new project for that. The main purpose is to define variables in it which will be used in reporting(restrictions). Now I need to enhance that structure with RSR00001 code since it dealys with declaring