Restart run of FPCC0002

Hi.,
Please let me know the process of restart run of FPCC0002. We have executed the the FPCC0002 in 100 parallel jobs, out of whcih 10-20 jobs got cancelled.
Can any one please let me know the process of re run of the entire job again.
Thanks in advance.
Ramesh

Hi @Valiant22 ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that you let a friend use your notebook to download an update to a USB flash drive and ran out of space before completing the download. Now you have no sound on the notebook. Is that correct?
Are you running Windows 8?
Is it possible the update installed in your notebook?
There is a recent Windows update that has been causing havoc with the sound on Windows 8 computers. No Sound from Speakers (Windows 8).
Did you accidentally mute your system?
You also said you are unable to do a backup. How are you trying to do your backup?
Did you use the Windows backup, backup from the recovery manager or third party software?
Was there an error message ?
If you are not running Windows 8 please reply back with your Operating System and the exact model of HP notebook you have.
How Do I Find My Model Number or Product Number?
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

AFAB - Repeat Run & Restart Run

Hello Sap Experts
Can anyone kindly explain the situation we need to use "Repeat Run" & "Restart Run" available in AFAB.
Kindly expain.
Thanks & Regards
Deepak Garg

Hi Deepak,
Repeat run is used to post the depreiciation for assets in a period, for which the planned depreciation has been posted.
Ex: You have run the dep for 01-2010, then in the same period you might have added some more assets and need to be posted depreciation for the same period again. In this case repeat run would be useful.
Note: this repeat run can be done for the last posted period only.
Restart option is to continue the depreciation posting run from a last dep run, which is stopped due to some errors casused at the system level.
Thanks,
Srinu

I need help please , i try to use itunes but my iPhone don't appear on itunes, i try everyting ,dowwload itunes again restart computer and iPhone,restart running device support,etc.

i need help please , i try to use itunes but my iPhone don't appear on itunes, i try everyting ,dowwload itunes again restart computer and iPhone,restart running device support,etc.

Windows doesn't detect iPhone: http://support.apple.com/kb/ts1538
Mac: http://support.apple.com/kb/ts1591

Depricaition restart Run.

Dear All,
we have changed the depriciation start date of one asset and runed the deprication run with out opening fiscal period so the run was terminated. now we have reset the deprication start date and want to run the depriciation restart run, but the system is posting the documents where as we dont want to post any document in that particulat depriciation period.
can any one suggest how it can be done.
Thanks & Regards

Hi,
It is possible to repeat the posting run within the period last posted. In the repeat run, the system posts changes to depreciation, as compared to the depreciation amounts from the previous run.
Normally the repeat run is carried out at the end of the fiscal year, if completing postings are necessary because of corrections to manual depreciation or depreciation terms.
Regards,
Eli

Power PC G5 Freezing/Crashing, then after restart, running great for HOURS.

I have an old PPC G5 Dual 2.5 with 5 Gigs of RAM, and the Delphi Liquid Cooling system, running OSX 10.5.8.
It will ALWAYS freeze within 20 minutes of startup, and have to be hard-shutdown. After it is restarted, it runs GREAT for HOURS. I can mix a 40-channel Pro Tools session forever, and no crashes, nothing. After it's shut down for a few hours, over night, etc., I'll start it up, and FREEZE. THe freeze is usually accompanied by the fans gradually ramping up until they're full speed. I'm surprised it doesn.t start to move.
What the ****? Why the initial freeze followed by incredible stability?
Please, someone help me without telling me to "clean it" or "replace the processors". The thing runs FLAWLESSLY after the initial freeze.
I find this to be incredibly odd. I have a Mac Pro now and am trying to sell this G5, but would like to resolve this freeze problem first.

No idea on Best Buy's prices.
Couple of resets, but I wouldn't do either yet, seems were on to a different problem now...
Does it boot into Open Firmware with CMD+Option+o+f ?
http://docs.info.apple.com/article.html?artnum=42642
reset-nvram (press Enter)
set-defaults (press Enter)
reset-all (press Enter)
Have you done a PRAM reset, CMD+Option+p+r...
http://docs.info.apple.com/article.html?artnum=2238
But I suspect AT&T may have been refer to a Modem/Router reset.
I also seem to be missing two 256MB sticks of memory sometimes. Could it be Bad RAM?
Could be bad RAM, but with the "sometimes I think it's the Lead-free solder issue.
If you're sure the RAM is good, try the Hair Dryer trick...
http://discussions.apple.com/message.jspa?messageID=13240047#13240047
https://discussions.apple.com/message/15223603#15223603
https://discussions.apple.com/message/15499912#15499912
https://discussions.apple.com/message/15613068#15613068
https://discussions.apple.com/thread/3270112
https://discussions.apple.com/message/16053892#16053892
It can show on any G5, and even many other computers & electronic devices of the period.
http://www.macintouch.com/reliability/pmg5.html
http://lowendmac.com/ppc/power-macintosh-g5.html
And see this last one in particular...
https://discussions.apple.com/message/16781690#16781690

Error APERB014 in restart run ASKBN

Dear All,
     When I run ASKBN in " restart posting run", system show me error as below:
All documents were updated successfully, restart is not allowed
Message no. APERB014
     Can anyone help me on this?
Thanks!
Cindy

DETAILS OF OADB
Book Depreciation is 1 (Area posts in real time)
Then i double clicked & i went into following
Deprec. area    1    Book depreciation
                     Book deprec.
Real depreciation area is Checked
Posting in G/L - Area posts in real time
Target Ledger Group - BLANK
Different Depreciation Area - BLANK
Cross-syst.dep.area - BLANK
Acquisition value - Only positive or zero allowed
Net book value - Only positive or zero allowed
Investment grants - Only negative or zero allowed
Revaluation - All values allowed
Ordinary depreciat. - Only negative or zero allowed
Special Depr. - Only negative or zero allowed
Unplanned Depreciat. - Only negative or zero allowed
Transfer of reserves - Only negaitive or zero allowed
Interest - Only positive or zero allowed
Revaluation ord.dep.- No values allowed
Area for deprived area is unchecked

Keeps restarting, running out of things to try :(

My iPhone froze up earlier tonight, after holding power and sleep to restart it now all it will do is come up with the apple logo, sit there for awhile (probably 5 minutes or so) then restart. Sometimes the loading 'wheel' displays half hidden under the logo. I have tried restarting it, restoring from iTunes, putting it in DFU mode then restoring from iTunes, restarting it without the SIM card in, and putting it in DFU mode then restoring to the 2.2.0 firmware from iTunes (it was on the latest). Nothing has worked. This phone has never been jailbroken, never been dropped, gotten wet, etc... I am really hoping it's not hardware as it's no longer under warranty and I can't afford $200 for out of warranty repair if it is. Any help or ideas would be greatly appreciated.

1) Power off the iPhone by depressing both the sleep/wake button on the top of the iPhone and the home button. Wait for the iPhone screen to turn black aka screen-off.
2) Depress the home button and connect the iPhone/iPod sync cable into the docking port on the bottom of the iPhone at the sametime without removing the home button.
3) You should be able to see the Apple logo coming up on the iPhone and then the recovery screen with be shown after the Apple logo:
4) iTunes will start and inform you that it has detected an iPhone in recovery mode and you should restore your iPhone to start using it.
5) Perform your firmware restore.
7) Re-sync your phone to add back all your data and apps.

Dep. run restart error

we have run depreciation run for asset 100020(useful live 3 years) for June. in July.10, we change asset useful live to 5 years,
now we run AFAB for June and choose restart run, however, the output list is empty.
we also try repeat run, but still no result, we have choose test run and list assets, output list only
how can we re-run for June? thanks

Hi,
why restart? Restart is used the program is terminated during a posting run for various reasons, then the program has to be started again in the restart mode to clear the data base of possible inconsistencies. In TABA-XBUKZ = 1, a restart is necessarry.
Can you see in AW01N plaed depreciation that should be posted per AFAB?
If no, you have to check the depr. calculation and depr. key on the asset.
If you have planed depr. you have to make a normal depreciation run in the following period, or a repead run for the previous period.
Regards Bernhard

Restart cepreciation run.

Dear All,
After restarting also iam still getting the following message
"Last posting run was terminated restart in the 12 previous year"
is there any thing iam missing here at the time of restarting.
Thanks,
Srini,

hi
in RESTART mode is posible only last(Previous)depreciation run only.
Check it once Previous Period only posible in RESTART RUN.

How to restart/force run of APEX jobs?

Our development server system date was temporarily set to a period in the future, which meant that our Oracle jobs were left with their 'next date' also set to a time in the future.
For most of our jobs, we could simply log in as the schema owner and manually restart/run the affected jobs.
With the APEX-based jobs, we has a problem in that they were owned by the 'flows' user and their password was unknown/random from installation.
We got around the problem by using the 'su' method (see http://asktom.oracle.com/tkyte/Misc/su.html) to temporarily change the password.
Is there an official way of restarting/force-running APEX jobs? By default, there are the mail queue flushing and session clearing jobs but I assume that any other jobs created within APEX will have similar issues?

Hello,
This is what you can do in SM37.
Execute the list of batch jobs, when the result appears on the screen edit the ALV grid via CTRL+F7.
Now add the following columns "TargetServ" and "Executing server".
You will now have two extra columns in your result list.
TargetServr contains the value of the application server where the job should run when you have explicitely filled it in.
Often this is empty, this means that at runtime SAP will determine itself on which application server the job will run (depending of course where the BGD processes are defined).
Executing server is filled in always for all executed jobs, this is the actual application server where the job has run.
You can also add these two fields in your initial selection screen of SM37 by using the "Extended job selection" button.
I hope this isusefull.
Wim

IMac unable to restart after downloading latest software update (including iTunes 11.2)

My system is a mid-2007 iMac (Intel) with latest software updates always promptly installed (OSX Mavericks, etc) and 320 GB internal HD, 4GB Ram.
Today the software updater informed me that an update to iTunes was available and so I allowed it to download the update and then restart the computer. The restart was not successful - the computer display will show the status window progressing as the update is installed and then nears completion, but will freeze at the apparant point of completion and the restart will not complete. I tried restarting several times and it always hangs up and does not complete.
I then ran the Disc Utilities program - first time I ran it, it identified disc problems with the internal HD and proceeded to repair them. Following that I trried to restartt and it ran into the same difficulties and did not restart. Subsequently I ran disc utilities and it reports the internal HD to be fine. I've also tried several times to boot the computer and restore from my Time Machine backups and it will not complete the restore. I do get to the screens where I can select the volume to restore from, the volume to restore to, and so forth. After these efforts were not successful, I finally tried to re-download OSX and do a clean system restore, it progressed nearly to completion and then aborted the system installation without completing.
Since having this problem I've therefore been unable to use the computer in Mac mode. I had just about concluded that my hard disc must be replaced, when I decided to see if I could restart running Windows (bootcamp), and I was able to do that successfully. The hard disc is therefore not damaged, or at least the partition of the hard disc used by Windows is not damaged.
Is my most likely option to replace the hard disc or is there something I can still do, in order to see if the hard disc can be restored using a saved backup, before I replace it?
I have the further complication of finding that the Apple store will not replace the hard disc for my computer because it is over 5 years old. I can probably locate a shop such as Best Buy locally who can do that, or I can simply purchase an external hard disc and use that as my primary hard disc until I either replace the internal hard disc or simply replace the computer. Since it is a 7 year old iMac, it would not be surprising to have to replace the hard disc after this length of time. I also see that there are instructions available online to explain how to replace the internal hard disc myself, but I'm unsure at this point whether or not I want to do it myself.

Lacking any responses to my initial post above, I will briefly update how I resolved this issue today.
Installed new external hard disc, 1 TB WD My Passport for Mac, and straightforward setup involving first installing current OS X operating system, then system migrator utility to rebuild the same setup as saved in latest Time Machine backup. The whole process was somewhat time consuming due to my internet connection speed and USB data transfer speeds but it went without any issues. The computer now boots up and operates identical in all respects to how it did before the problem occurred.
Regarding the internal HD of my iMac, if I now run Disc Utility to verify the disc, it reports "appears to be OK". However, viewing the disc usage in "About This Mac" window, it displays as entirely empty. Opening it in the finder also shows only a "Apple Hot News.mbox" file and a single .jpeg image, and .nothing else.
Interestingly, the Bootcamp partition of my iMac's internal HD continues to work fine and appears unaffected by the problem. I use bootcamp rarely but still will plan to set up a replacement bootcamp volume on the new hard disc soon, in order to take its place.
That the problem surfaced coincident with the software update may have been nothing more than bad luck? At this point I have no reason to suspect that the softward update had anything to do with the difficulties.

Problem in dep run

Hi all,
when i am running the dep. The depreciation is not calucluated correctly in Asset a class for Prior Year Assets
Example 1
Asset Number                          4036196
Capitalised date                         30.04.2004
Depreciation Key                         Z095 (Year 1 = 50%, Year 2 = 35%, Year 3 = 15%)
Total Depreciation Posted                56879.34      ( = 15%)
Depreciation that should have been posted     379192.34          ( = 100% as Capitalised date is greater than 3 years)
Example 2
Asset Number                          4036208
Capitalised date                         30.04.2005
Depreciation Key                         Z095 (Year 1 = 50%, Year 2 = 35%, Year 3 = 15%)
Total Depreciation Posted                41657.37          ( = 15%)
Depreciation that should have been posted     277715.37          ( = 100% as Capitalised date is 3 years old in 2007)
Example 3
Asset Number                          4036221
Capitalised date                         30.04.2006
Depreciation Key                         Z095 (Year 1 = 50%, Year 2 = 35%, Year 3 = 15%)
Total Depreciation Posted                35000.00          ( = 35%)
Depreciation that should have been posted     85000.00          ( = 85% as Capitalised date is 2 years old in 2007)
We are using the straight line method.
as in multi level method i select the following parameters
(acqusiton year) (year) (per) (basevalue) (percentage)(reduct)
9999                   1       0      01             50                0
9999                   2       0       01            35                0
9999                  999    0        01            15                0
can you tell me what exactly is the problem is. in dep key or in any where else.
its urgent because year end closing is near please help....
Thanks.

Hi
No issue go to AFAB select the repeat Run Radio button and execute the Dep run in Background all the previously posted depreciation documents if posted with errors will get reversed and new documents will get posted.
Also read the below message from SAP on Repeat Run
Restart depreciation posting run
Indicator for depreciation posting with restart option.
Depreciation posting is performed in several steps and at each step the system logs the current status. If the program is terminated during a posting run for various reasons, then the program has to be started again in the restart mode to clear the data base of possible inconsistencies.
A restart run should therefore only be performed in certain cases and cannot be started in a test mode.
Good Luck
Hari

Ovmcli change ip on guest machine (running Windows XP)

Hello,
I'm new to OracleVM but find it very useful.
We had previous expierences with VMWare virtualization in our company
(VMWare server 2.0). It had VMWare tools which included cli (command line interface).
I need to change IP address of Windows XP guest machine.
To be exact: our guest machine is running windows XP, our host is Oracle VM.
We want to change IP from let's say: 10.60.60.200 to 10.60.60.201 on our guest machine running XP.
In WMWare we used:
$command = "netsh interface ip set address LAN static 10.60.60.200 255.255.255.0 10.60.60.1 1";
and a command that fired the action $command:
vmrun -T server -h HOST_IP_ADDRESS -u HOST_USER -p HOST_PASSWORD -gu GUEST_USER -gp GUEST_PASSWORD runScriptInGuest "DATASTORE TEMP/xxx.vmx" cmd /c & $command;
Is there something similar to "runScriptInGuest" or is there any other way to change IP of guest machine in Oracle VM?
I tried to use
ovmcli with:
vm nic conf
but the options don't include changing IP.
As far as I can see there is only:
--serverpool_name
--vm_name
--nic_name
--new_nic_name
--bridge
--rate_limit
--enable_qos
--disable_qos
options available for configuring network interface adapters.
Bert

The problem with changing IP inside the virtual machine (windows XP) is that
we use dynamic virtual machines. By 'dynamic' I mean that we have a set of templates that
we clone, start, configure and then run application tests on them. The purpose of all
this is that we want to have identical operating environement for all tests. In this way
we can relate to results as done on exactly the same computer.
The whole process (cloning, starting, configuring, restarting, running application tests and then pausing VM) is done
from scripts - so we CANNOT just manually log via VNC into machine and change it's IP.
We tried to use STAF (http://staf.sourceforge.net/) but it operates on IP
so we can run with this tool any task except changing machine's IP.
(STAF doesn't deal with the change of IP in time.
Apart from this it sends response with new IP when
server excepects response from old IP).
Summerizing - runScriptInGuest from VMWare solved the problem for us
because it ran a CONSOLE command inside Windows Guest
which changed the IP. runScriptInGuest doesn't rely on
machine's IP so everything ran smooth.
Is there any other way to change this ip
from SCRIPT. I mean some way to run this command
remotely on windows or do this through OracleVM virtual machine configuration ?
I hope it clears the question.
Bert

Depreciation run after adjustment in period 14,2007

Hi,
My user has posted adjustment to an asset in period 14. All other periods are closed. Period 13 is already closed and cannot be opened again. And actually, we have run depreciation in period 13.
However, when we want to run depreciation in period 14, system prompt error message and ask to restart run depreciation in period 13.
I am in version ECC5.0.
Now I am confused as the depreciation run is automatically released and therefore, we cannot release the batch in foreground and change the period manually.
How can I resolve this problem?
Thanks.
Rgds,
Nik

Hi Nik,
we solved a similar problem as follows:
1.) Open period 13 again
2.) Run depreciation with "restart" in period 13
3.) Cancel FI document in period 13
4.) Close period 13
5.) Post FI document in period 14 manually
Maybe this will help you solve your problem!
Best regards,
Walter

Depreciation run for specific depreciation area

Hi,
In AA, we defined 2 depreciation area for all the assets class, one for local(01), another one for group(30). all the area will be posted to FI.
according to requirement, we would like to stop specific depreciation area depreciation run for certain asset(not asset class). this means that for depreciation area 01, it will be work, but for 30, it should be stopped. may be 3 months later, this asset will be restart run depreciation for area 30.
Would anyone know how to do that? thanks.
Ben

Hi
Hope you have to change the Config settings then.
Go to AO21 and select your screen layout and double click Field Group rules and under FG 18 you have Deactiv. area make this enrty optional and also select the check box MnNo.
Save the entry.
Come back to AS02,now the dep area will be available for deactivation.
Good Luck
Hari

Restart run of FPCC0002

Similar Messages

Maybe you are looking for