Restart takes more than 2 hours!
Since a couple of days a restart on my 2008 MacBook Pro 15 inch takes more than 2 hours. Anybody have the same problem?
It's likely that your boot drive is failing, or that you have some other hardware fault. Back up all data immediately, then run the Apple Hardware Test.
Intel-based Macs: Using Apple Hardware Test
Similar Messages
-
When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?
mostafa182 wrote:
... how I can solve this problem?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
When I restart my Mac, the grey screen appears like usual. But it takes more than 40 minutes (or more) for it to load to finish restarting the Mac. What should I do to fix it?!
Disconnect all devices from your computer if you have not already done so. Restart again. If the problem has been resolved, you had a peripheral conflict. You will then have to reconnect the devices one at time, restart, to locate the culprit.
Login Items is another culprit. Check your login items.
System Preferences>Accounts>Login Items
Delete/disable all you do not need or want. -
RMAN archive backup takes more than 1 hour.
Hello,
We execute the following command from HP Data Protector 5.50 in order to backup archives from an Oracle 8.1.7 database running in HP-UX 11.00:
run {
allocate channel 'dev_0' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=inf,OB2BARLIST=Oracle_Archivers_Inf)';
allocate channel 'dev_1' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=inf,OB2BARLIST=Oracle_Archivers_Inf)';
allocate channel 'dev_2' type 'sbt_tape'
parms 'ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=inf,OB2BARLIST=Oracle_Archivers_Inf)';
sql 'alter system switch logfile'
sql 'alter system archive log current'
backup
filesperset 1
format 'Oracle_Archivers_Inf<inf_%s:%t:%p>.dbf'
archivelog until time 'SYSDATE-2'
delete input;
backup
filesperset 1
format 'Oracle_Archivers_Inf<inf_%s:%t:%p>.dbf'
archivelog all;
This process takes more than 2 hours for just 3 GB and we don't think this is network issue.
Is our RMAN command doing more thinks than just archives backup?
Almost at the end of backup we get following message:
Default exp binary /INF/oracle/app/product/8.1.7/bin/exp/ is used for catalog export.
Does this message mean an export is done at the end of archive backup?
Note that message belongs it is more than 2 hours later.
Thanks in advance for your help.
Regards,
CarlesYes, it appears one of your utilities is doing an export backup, check HP Data Protector settings.
-- and/or -- you are having tape problems: ... type[b] 'sbt_tape' -
10g Full Database Dump Takes more than 2 Hours Still not finished
Hi all,
Full Database Dump Takes more than 2 Hours, Still not finished.
Version - Oracle 10g 1.0.2.0
Database Size is Around 160GB.
Used Below Query to take Full Database Dump.
expdp user/pwd@10gdb full=y directory=test_dir dumpfile=curent10g.dmp logfile=expdpcurent10g.log;
It takes more than 1 hour in processing the functions.i.e)
Processing object type DATABASE_EXPORT/SCHEMA/FUNCTION/FUNCTION
And the Log File:
Export: Release 10.1.0.2.0 - Production on Friday, 04 May, 2012 10:17
Copyright (c) 2003, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
FLASHBACK automatically enabled to preserve database integrity.
Starting "EXPTEST"."SYS_EXPORT_FULL_02": exptest/********@curentdb full=Y directory=test_dir dumpfile=curent10g.dmp logfile=expdpcurent10g.log;
Estimate in progress using BLOCKS method...
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 4.574 GB
Processing object type DATABASE_EXPORT/TABLESPACE
Processing object type DATABASE_EXPORT/DE_SYS_USER/USER
Processing object type DATABASE_EXPORT/SCHEMA/USER
Processing object type DATABASE_EXPORT/ROLE
Processing object type DATABASE_EXPORT/GRANT/SYSTEM_GRANT/PROC_SYSTEM_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/GRANT/SYSTEM_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/ROLE_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/DEFAULT_ROLE
Processing object type DATABASE_EXPORT/SCHEMA/TABLESPACE_QUOTA
Processing object type DATABASE_EXPORT/RESOURCE_COST
Processing object type DATABASE_EXPORT/SCHEMA/DB_LINK
Processing object type DATABASE_EXPORT/TRUSTED_DB_LINK
Processing object type DATABASE_EXPORT/SCHEMA/SEQUENCE/SEQUENCE
Processing object type DATABASE_EXPORT/SCHEMA/SEQUENCE/GRANT/DE_S_SEQ_OWNER_OBJGRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/DIRECTORY/DIRECTORY
Processing object type DATABASE_EXPORT/DIRECTORY/GRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/CONTEXT
Processing object type DATABASE_EXPORT/SCHEMA/DE_PUBLIC_SYNONYM/SYNONYM
Processing object type DATABASE_EXPORT/SCHEMA/SYNONYM
Processing object type DATABASE_EXPORT/SCHEMA/TYPE/TYPE_SPEC
Processing object type DATABASE_EXPORT/DE_SYSTEM_PROCOBJACT/DE_PRE_SYSTEM_ACTIONS/PROCACT_SYSTEM
Processing object type DATABASE_EXPORT/DE_SYSTEM_PROCOBJACT/DE_POST_SYSTEM_ACTIONS/PROCACT_SYSTEM
Processing object type DATABASE_EXPORT/SCHEMA/PROCACT_SCHEMA
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/PRE_TABLE_ACTION
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/GRANT/DE_S_TABLE_OWNER_OBJGRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/GRANT/DE_S_TABLE_NOTWGO_OBJGRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/INDEX/INDEX
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/CONSTRAINT/CONSTRAINT
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/STATISTICS/TABLE_STATISTICS
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/COMMENT
Processing object type DATABASE_EXPORT/SCHEMA/PACKAGE/PACKAGE_SPEC
Processing object type DATABASE_EXPORT/SCHEMA/PACKAGE/GRANT/DE_S_PACKAGE_OWNER_OBJGRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/FUNCTION/FUNCTION
Help me.Export is Still in progress
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Job: SYS_EXPORT_FULL_02
Owner: EXPTEST
Operation: EXPORT
Creator Privs: FALSE
GUID: 94AB0C8AA824462AA96C8481CF0F676F
Start Time: Friday, 04 May, 2012 10:18
Mode: FULL
Instance: curentdb
Max Parallelism: 1
EXPORT Job Parameters:
Parameter Name Parameter Value:
CLIENT_COMMAND userexp/********@curentdb full=Y directory=test_dir dumpfile=curent10g.dmp logfile=expdpcurent10g.log;
DATA_ACCESS_METHOD AUTOMATIC
ESTIMATE BLOCKS
INCLUDE_METADATA 1
LOG_FILE_DIRECTORY TEST_DIR
LOG_FILE_NAME expdpcurent10g.log;
TABLE_CONSISTENCY 0
State: EXECUTING
Bytes Processed: 0
Current Parallelism: 1
Job Error Count: 0
Dump File: C:\ORACLE DMP\CURENT10G.DMP
bytes written: 4,096
Worker 1 Status:
State: EXECUTING
Object Schema: PUBLIC
Object Type: DATABASE_EXPORT/SCHEMA/PACKAGE/GRANT/DE_S_PACKAGE_OWNER_OBJGRANT/OBJECT_GRANT
Completed Objects: 1
Total Objects: 1
What Does it mean, Suggest. -
XDCAM 1080i60 with Chroma rendering 30 minute episode take more than 17 hours is it usually?
XDCAM 1080i60 format with Chroma rendering 30 minute episode take more than 17 hours is it usually?
All depends on the system...
If by "Chroma rendering" you mean chroma key rendering then it seems quite slow (but I cut on a hopped up
8X 3.2GHz Mac Pro with a lot of everything, so slow is relative.)
If you mean something like a Magic Bullet Colorista "treatment", that's another story. I've seen that increase renders by as much as 25X the duration, i.e., a 30 minute show might take 12-15 hours on a slow machine. -
i have installed windows 7 into mac 10.6 after complete it restart and from than its display is blank and nthing can happen it takes more than 3 hr so now what should i do?
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
QUERY TAKES MORE THAN 30 MINUTES AND IT'S CANCELED
Hi
I have one workbook and sometimes it takes more than 30 minutes to be executed, but Discoverer cancels it, Does anybody know how to alter this? I mean if the query takes more than 30 minutes i need it to be finished.
Any help will be appreciated.
Best Regards
Yuri LópezHi
You need to alter the timeout settings and these are located in multiple places.
Discoverer Plus / Viewer using this workflow:
1. Edit the pref.txt file on the server located here: $ORACLE_HOME\discoverer\util
2. Locate the preference called Timeout and change it to your desired value in seconds. The default is 1800 which means 30 minutes
3. Save pref.txt
4. Execute applypreferences.bat if running on Windows or applypreferences.sh if running on Linux or Unix
5. Stop and restart the Discoverer server
Discoverer Administrator using this workflow:
1. Launch Discoverer Administrator
2. From the menu bar, select Tools | Privileges
3. Select the user
4. Open the Query Governor tab
5. If "Prevent queries from running longer than" is checked, increase the limit
6. Click OK
Note: if "Prevent queries from running longer than" is not checked then the Timout in the pref.txt controls how long before the queries stop. If it is checked and it is lower than Timeout you need to increase it.
Let me know if this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com -
IChatAgent takes more than 100% of CPU
The iChatAgent takes more than 100% of CPU. It works normally for 10-15min with little CPU usage but then takes 100% of CPU and stays like that until I quit/kill the process. I tried waiting for hours to see it might go down is usage, but no, and the cpu fan remains on continuously.
I simply use it for text based chatting, and have disabled audio, video,microphone etc, and still this behavior that I can't use it for more than 15min.
Here is the iChat version: Version 5.0.3 (745)
Macbook Pro/10.6.4/Intel Core i7
I have tried removing ~/Library/preferences/com.apple.iChatAgent.plist as suggested elsewhere, and that hasn't helped either.Thanks again Ralph.
No, I do not have any add-ons, just out-of-the-box ichat without any audio, video in use.
At this stage unfortunately, I can't continue using iChat as it hogs up the CPU in less than 15min. And that I do not experience any problem with other chat-clients such as AIM or jabber, so switching over to those until there is a resolution.
Suhas
Here is a process-inspection done through ActivityMonitor when it was taking 100%:
Sampling process 517 for 3 seconds with 1 millisecond of run time between samples
Sampling completed, processing symbols...
Analysis of sampling iChatAgent (pid 517) every 1 millisecond
Call graph:
2457 Thread_7542 DispatchQueue_1: com.apple.main-thread (serial)
2457 start
2457 main
2454 -[NSRunLoop(NSRunLoop) run]
2439 -[NSRunLoop(NSRunLoop) runMode:beforeDate:]
2160 CFRunLoopRunSpecific
2087 __CFRunLoopRun
670 machport_insertmember
662 mach_msg
661 machmsgtrap
1 mach_msg
5 machport_insertmember
3 migget_replyport
596 machport_extractmember
589 mach_msg
577 machmsgtrap
12 mach_msg
4 machport_extractmember
3 migget_replyport
389 mach_msg
371 machmsgtrap
18 mach_msg
355 __CFRunLoopDoSources0
237 _MessageAvailable(void*)
110 XprtGetMessage
106 XPRT::InternalGetMessage(void*, unsigned int&, void*&, void*&, bool)
39 XPRT::TMessageQueue::GetMessage(bool)
14 XPRT::TPtrList::RemoveHead()
7 XPRT::TList<void*, XPRT::TDynamicTraits>::FreeNode(XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*)
6 XPRT::TList<void*, XPRT::TDynamicTraits>::FreeNode(XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*)
1 XPRT::TDynamicTraits::VOrphanElement(void*) const
7 XPRT::TPtrList::RemoveHead()
11 pthreadmutexunlock
8 pthreadmutexlock
4 spinlock
2 OSSpinLockUnlock
2 pthreadmutexlock
3 XPRT::TMessageQueue::GetMessage(bool)
3 _spinlock
31 free
20 szone_size
11 free
24 szonefree_definitesize
23 szonefree_definitesize
1 spinlock
5 XPRT::InternalGetMessage(void*, unsigned int&, void*&, void*&, bool)
5 operator delete(void*)
1 XPRT::TCritSec::Unlock()
1 _spinlock
2 XprtTlsGetValue
2 pthread_getspecific
110 XprtGiveMessage
85 COOL::TSocket::SocketMessageProc(unsigned int, void*, void*)
50 XprtPostMessage
48 XPRT::InternalPostMessage(void*, unsigned int, void*, void*)
25 operator new(unsigned long)
21 malloc
18 malloczonemalloc
10 szonemalloc_shouldclear
6 szonemalloc_shouldclear
4 _cpunumber
5 malloczonemalloc
2 _spinlock
1 szone_malloc
3 malloc
4 operator new(unsigned long)
10 XPRT::TMessageQueue::PostMessage(XPRT::SMessage*)
5 XPRT::TPtrList::AddTail(void*)
4 XPRT::TList<void*, XPRT::TDynamicTraits>::NewNode(void*, XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*, XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*)
1 XPRT::TPtrList::AddTail(void*)
4 pthreadmutexlock
1 _spinlock
6 pthreadmutexunlock
5 pthreadmutexunlock
1 spinlock
2 XPRT::InternalPostMessage(void*, unsigned int, void*, void*)
2 _spinlock
1 XPRT::TCritSec::Lock()
1 dyldstub__spinlock
1 dyldstub__spinunlock
2 XprtPostMessage
14 COOL::TSocket::FireDataAvailable()
13 COOL::TProxiedSocket::OnDataAvailable(IInputStream*, IUnknown*)
6 XPTL::CComObject<COOL::TProxiedSocket>::AddRef()
5 XPTL::CComObject<COOL::TProxiedSocket>::Release()
2 COOL::TProxiedSocket::OnDataAvailable(IInputStream*, IUnknown*)
1 COOL::TSocket::FireDataAvailable()
7 non-virtual thunk to COOL::TProxiedSocket::OnDataAvailable(IInputStream*, IUnknown*)
6 COOL::TSocket::SocketMessageProc(unsigned int, void*, void*)
6 XPRT::TPtrFromPtrMap::Lookup(void*, void*&) const
6 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::Lookup(void*, void*&) const
3 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const
2 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const
1 XPRT::TDynamicKeyTraits::VHashKey(void const*) const
3 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::Lookup(void*, void*&) const
2 XPTL::CComObject<COOL::TSocket>::AddRef()
17 XPRT::TMessageMap::Lookup(unsigned int)
7 XPRT::TPtrFromPtrMap::Lookup(void*, void*&) const
5 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::Lookup(void*, void*&) const
4 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const
3 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const
1 XPRT::TDynamicKeyTraits::VHashKey(void const*) const
1 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::Lookup(void*, void*&) const
2 XPRT::TPtrFromPtrMap::Lookup(void*, void*&) const
3 _spinlock
3 pthreadmutexunlock
2 XPRT::TMessageMap::Lookup(unsigned int)
2 pthreadmutexlock
1 OSSpinLockUnlock
1 pthreadmutexlock
8 XprtGiveMessage
6 _MessageAvailable(void*)
4 CFRunLoopSourceSignal
3 CFRunLoopSourceSignal
1 spinlock
4 _IMWillLog
2 _spinlock
1 OSSpinLockUnlock
85 CFSetApplyFunction
84 CFBasicHashApply
40 CFBasicHashGetBucket
28 _CFSetApplyFunction_block_invoke1
20 __CFRunLoopCollectSources0
12 __CFRunLoopCollectSources0
4 CFRetain
3 _CFRetain
1 OSAtomicCompareAndSwap32Barrier
1 _compare_andswap32
8 _CFSetApplyFunction_block_invoke1
16 CFBasicHashApply
1 CFSetApplyFunction
16 __CFRunLoopDoSources0
4 CFRelease
3 _CFRelease
2 CFGetTypeID
2 dyldstubOSAtomicCompareAndSwap32Barrier
2 dyldstub_IMWillLog
1 CFBasicHashGetCount
1 CFSetGetCount
1 OSAtomicCompareAndSwap32Barrier
1 _compare_andswap32
1 OSSpinLockUnlock
29 CFSetContainsValue
25 CFBasicHashGetCountOfKey
25 _CFBasicHashFindBucket1
13 _CFBasicHashFindBucket1
10 __CFStringHash
1 CFHash
1 __CFBasicHashStandardCallback
4 CFSetContainsValue
24 __CFRunLoopRun
9 _spinlock
5 dispatch_get_main_queue_port4CF
3 CFRunLoopGetMain
2 OSSpinLockUnlock
2 dyldstubOSSpinLockLock
1 dyldstub_mach_msgtrap
1 pthread_getspecific
1 pthreadmainnp
36 __CFRunLoopFindMode
31 CFSetGetValue
30 CFBasicHashFindBucket
29 _CFBasicHashFindBucket1
9 __CFStringHash
8 _CFBasicHashFindBucket1
6 CFHash
5 __CFBasicHashStandardCallback
3 CFEqual
2 __CFBasicHashStandardCallback
1 __CFRunLoopModeHash
1 CFBasicHashFindBucket
1 CFSetGetValue
2 __bzero
2 memset
1 __CFRunLoopFindMode
17 __CFRunLoopModeIsEmpty
17 CFSetContainsValue
17 CFBasicHashGetCountOfKey
17 _CFBasicHashFindBucket1
12 __CFStringHash
5 _CFBasicHashFindBucket1
8 CFRunLoopRunSpecific
7 _spinlock
2 spinlock
2 dyldstub_machmsg
1 dyldstubOSSpinLockUnlock
121 _CFRunLoopFinished
80 __CFRunLoopFindMode
66 CFSetGetValue
63 CFBasicHashFindBucket
57 _CFBasicHashFindBucket1
22 __CFBasicHashStandardCallback
16 CFEqual
14 CFEqual
2 __CFRunLoopModeEqual
6 __CFBasicHashStandardCallback
17 _CFBasicHashFindBucket1
9 __CFStringHash
6 CFHash
3 __CFRunLoopModeHash
5 CFBasicHashFindBucket
1 __CFBasicHashStandardCallback
3 CFSetGetValue
6 __bzero
5 __CFRunLoopFindMode
2 memset
1 _CFRuntimeSetInstanceTypeID
29 __CFRunLoopModeIsEmpty
19 CFSetContainsValue
14 CFBasicHashGetCountOfKey
13 _CFBasicHashFindBucket1
7 __CFStringHash
3 _CFBasicHashFindBucket1
2 __CFBasicHashStandardCallback
1 CFHash
1 CFBasicHashGetCountOfKey
5 CFSetContainsValue
6 pthreadmainnp
2 pthread_getspecific
1 CFRunLoopGetMain
1 __CFRunLoopModeIsEmpty
6 _CFRunLoopFinished
2 OSSpinLockUnlock
2 _spinlock
2 dyldstub_pthread_mainnp
39 _CFAutoreleasePoolPop
23 _CFAutoreleasePoolPop
7 pthread_setspecific
3 pthread_getspecific
2 objcgetFreedObjectClass
2 objc_collectingEnabled
2 pthread_self
29 -[NSCFString isEqual:]
11 -[NSCFString isEqual:]
8 CFStringGetCStringPtr
4 object_getClass
3 objcmsgSendvtable2
2 _CFStringGetLength2
1 NSClassFromObject
28 CFAbsoluteTimeGetCurrent
21 gettimeofday
18 __gettimeofday
12 __nanotime
6 __gettimeofday
3 gettimeofday
7 CFAbsoluteTimeGetCurrent
17 _CFAutoreleasePoolPush
8 pthread_setspecific
7 _CFAutoreleasePoolPush
2 objc_collectingEnabled
13 -[NSRunLoop(NSRunLoop) runMode:beforeDate:]
6 NSPopAutoreleasePool
2 NSPopAutoreleasePool
2 _CFExecutableLinkedOnOrAfter
2 objc_collectingEnabled
5 _spinlock
4 objc_msgSend
3 dyldstub_CFStringGetLength2
3 dyldstub_pthreadsetspecific
2 CFRunLoopRunInMode
2 CFRunLoopGetCurrent
2 dyldstubCFStringGetCStringPtr
2 dyldstubOSSpinLockUnlock
1 dyldstub__objcgetFreedObjectClass
1 dyldstubgettimeofday
1 dyldstub_objccollectingEnabled
1 dyldstub_pthreadgetspecific
1 objcmsgSendvtable12
9 objc_msgSend
3 -[NSRunLoop(NSRunLoop) run]
1 +[NSDate distantFuture]
1 CFRunLoopRunInMode
1 NSPushAutoreleasePool
3 dyldstub_objcmsgSend
2457 Thread_7543 DispatchQueue_2: com.apple.libdispatch-manager (serial)
2457 start_wqthread
2457 pthreadwqthread
2457 dispatch_workerthread2
2457 dispatch_queueinvoke
2457 dispatch_mgrinvoke
2457 kevent
2457 Thread_7553
2457 thread_start
2457 pthreadstart
2457 XPRT::_ThreadProc(void*)
2457 XPRT::TTimer::ThreadProc(void*)
2457 XPRT::TCondVar::Wait(int)
2457 pthread_condwait
2457 _semwaitsignal
2457 Thread_7554
2457 thread_start
2457 pthreadstart
2457 XPRT::_ThreadProc(void*)
2457 COOL::TSocket::SocketThreadProc(void*)
2457 select$DARWIN_EXTSN
Total number in stack (recursive counted multiple, when >=5):
11 _spinlock
6 OSSpinLockUnlock
5 __CFBasicHashStandardCallback
5 __CFStringHash
5 _CFBasicHashFindBucket1
5 spinlock
Sort by top of stack, same collapsed (when >= 5):
_semwaitsignal 2457
kevent 2457
select$DARWIN_EXTSN 2457
machmsgtrap 1609
__CFStringHash 47
_CFBasicHashFindBucket1 46
CFBasicHashGetBucket 40
_spinlock 37
mach_msg 31
__CFRunLoopRun 24
_CFAutoreleasePoolPop 23
szonefree_definitesize 23
szone_size 20
pthreadmutexunlock 19
CFEqual 17
CFBasicHashApply 16
__CFRunLoopDoSources0 16
pthread_setspecific 15
CFHash 14
-[NSRunLoop(NSRunLoop) runMode:beforeDate:] 13
objc_msgSend 13
__CFBasicHashStandardCallback 12
__CFRunLoopCollectSources0 12
__nanotime 12
-[NSCFString isEqual:] 11
free 11
CFSetContainsValue 9
OSSpinLockUnlock 9
spinlock 9
CFRunLoopRunSpecific 8
CFStringGetCStringPtr 8
XprtGiveMessage 8
_CFSetApplyFunction_block_invoke1 8
__bzero 8
pthread_getspecific 8
CFAbsoluteTimeGetCurrent 7
XPRT::TPtrList::RemoveHead() 7
_CFAutoreleasePoolPush 7
non-virtual thunk to COOL::TProxiedSocket::OnDataAvailable(IInputStream*, IUnknown*) 7
pthreadmainnp 7
pthreadmutexlock 7
CFBasicHashFindBucket 6
COOL::TSocket::SocketMessageProc(unsigned int, void*, void*) 6
XPRT::TList<void*, XPRT::TDynamicTraits>::FreeNode(XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*) 6
XPTL::CComObject<COOL::TProxiedSocket>::AddRef() 6
_CFRunLoopFinished 6
_MessageAvailable(void*) 6
__CFRunLoopFindMode 6
__gettimeofday 6
migget_replyport 6
objc_collectingEnabled 6
szonemalloc_shouldclear 6
XPRT::InternalGetMessage(void*, unsigned int&, void*&, void*&, bool) 5
XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const 5
XPTL::CComObject<COOL::TProxiedSocket>::Release() 5
dispatch_get_main_queue_port4CF 5
machport_insertmember 5
malloczonemalloc 5
operator delete(void*) 5
Sample analysis of process 517 written to file /dev/stdout -
Dear All,
I have created the following code which extended my filter functionality and allowed a to take more than one entry (Comma have to be inserted after
each entry).
For example:
"Country Filter" can take ----> Germany,Egypt,Holand<o:p></o:p>
"City Filter " can take ---------> Berlin,Münster
if (Country_PAR != null)
String[] Country_Array = Country_PAR.Split(new Char[] { ','});
query = from p in query where Country_Array.Contains(p.Hotel_Country) select p;
if (City_PAR != null)
String[] City_Array = City_PAR.Split(new Char[] {','});
query = from p in query where City_Array.Contains(p.Hotel_City) select p;
Now want to extend it more and say something like:
If * is included ---- > Give me all entries
ex. Ge* This will give me everything which starts with Ge
If <> is entred -----> Give me entries which are not equal to a certain entry
ex. Country Filter = <> Germany give me all other entries except Germany
Thanks alot,
ZayedThanks your reply. I mean no one know my feeling. except if the new car is your. If Geek Squad can't install it. Just let me know and go. right? I ask many time? Are you ok to finish? He said yes. First time fail after 5 hours long wait and tow my car to Toyota repair. Second time said only take 20 to 30 minutes to program the key. but fail again after about 4 hours 30 minutes long wait and head light is not automatic turn on at night. I have to take a day off drive to Toyota repair. My time is money. wait there more than 10 hours and done nothing. 5 days no car and take the subway Bus and long walk. How do I feel? I m the customer. if without the customer. How you get pay? Geek Squad use my remote start and alarm and I can't return it. I loss time and money. My new car has a repair record. That is what Bestbuy want to do for the customer. Geek Squad work for Bestbuy. right? You are not just loss one customer. You will loss more and more than the remote start alarm cost. Bestbuy will not know? How come just 200$ remote start alarm and the 50$ module. Bestbuy don't want to reimburse. I m not tell you to pay me 5 days for rental car. why don't just want a happy ending? Bestbuy is big company. I m very small. 250$ it cost Bestbuy nothing. You can't let the customer loss money because you. right?
-
Splitting an event takes more than 3 min
Hi,
I have about 8.000 photos in my library and 2.500 photos in a single event. Now I want to extract a set of pictures from this event and move it in a new event. Is there a faster way doing this than splitting the event before and after the set of pictures? This created 3 events and then I have to move the 3rd event back into the first, the 2nd event is what I want to keep.
BTW, with over 8.000 pictures in the library, is it normal that splitting an event takes more than 3 minutes?Danielle
Flag the pics you want to move to the new Event and the go Events -> Create Event from Flagged Photos. That will probably be faster.
BTW, with over 8.000 pictures in the library, is it normal that splitting an event takes more than 3 minutes?
I wouldn't have thought so, but it might take a while with an Event that has more that 2,500 pics in it. Remember, Events in the iPhoto Window correspond exactly with the Folders in the Originals Folder in the iPhoto Library package file (Right click on it in the Pictures Folder -> Show Package Contents). So splitting an event literally means creating a folder and moving files to it and so on.
Regards
TD -
I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why the iTunes Scripting Brigde returned failed when it is actually success? It occurred exactly 2 minutes after submit the request to Scripting Brigde. Is this 2 minutes related to the Apple Event time out? if it does, how do I get around this problem? thx
I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.
-
MacBook pro takes more than 10 minutes to start with ML ?
My Macbook pro takes more than 10 minutes to start. I press Start and it takes more than 10 minutes before I can enter my password. Need your help !
Sounds like time for a PRAM reset. Here's how:
1. Power down the machine.
2. Locate the following keys on your keyboard in preparation for Step 4:
‘command’ – ‘option’ – ‘P’ – ‘R’
3. Press the ‘power on’ button.
4. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
5. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up as normal. -
i am having the problem in my 3gs iphone. it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone.
i have taken the sim card out and put it back in even then its of no use.
if any one out there can help us it would be very nice of them. thank you for your time.I can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
Yes, my friend unlock the phone to use with Rogers but I don't know where -
How to make an indicator takes more than one input
Hello,
I want to know how to make an indicator ( like gauge for example) response to more than one case strrcuture result. In other words, how the indicator can take more than one input and move based on different input values ( the arrow of the gauge moves to different angles basesed on the logic structure and not only to one degree).
Thanks in advance,
YES, you got it right Coastal !
This is what i want to do,
I dont know how to establish this output in the software, i am still learning LabVIEW.
I put a merge block to join the outputs but it didnt work.
check it in the attached VI file.
I am sure it is an easy thing but I dont know how to implement it.
Any help you provide is appreciated,
Best wishes
Maybe you are looking for
-
Error 1935: An error occured during the installation of assemble component. Acrobat XI
I currently have Acrobat Professional 9.5.4 loaded and attempted to load Acrobat Professionl XI on a Windows 7 box. When I do, I receive the below error: Error 1935: An error occured during the installation of assemble component. {76C3F0F6-9
-
Unable to reinstall creative cloud into new computer
It says this code has been redeemed, what should I do?
-
Hi, as subject says, My WD 1.5TB Caviar Black brand new is inside Hitachi Tuoro Desk Pro 4TB USB 3.0 HDD enclosure and keeps ejecting randomly only on wake from sleep. On clean boot HDD works fine. Anyone know solution to this problem? Thank you
-
Programmatically update a Project after a resource rate change.
Hello, I have the following scenario (Project Server 2010): 1. The resource standard rate for an enterprise resource (Joe) have been changed from $120 to $125. The change was made in PWA 2. Joe has assignments in several projects 3. PMO wants to see
-
MacBook AIR won't TURN ON!!
My MacBook Air Doesn't turn on. I did everything already, pushing the shift+ctrl+option etc. 5 seconds 10 seconds etc. still no power, there is a green light on the charger but no light or sound coming from the macbook air. This is like only a month