Restart USB daemon or something?
Every once in a while I get connection errors when my Macbook wakes up. USB connected devices either don't respond, connections errors appear, etc. Most of these times it has something to do with the printer/scanner I have. Funniest thing is, sometimes the printer does work while the scanner doesn't.
Logging out of the account and then back in fixes the problem. Instead, I would like to restart the USB daemon 'or something' to make it re-discover all connected USB devices.
Any ideas?
HI Rob,
The problems you are experiencing sound like "kernel panics" ... go here to find out how to problem solve with these procedures:
http://www.thexlab.com/faqs/kernelpanics.html
Carolyn
Similar Messages
-
Hi,
is it possible to restart an individual proccess in Mail Service?
I want to restart lmtp daemon.
Is it in /System/Library/LaunchDaemons?
Another question? I've read launchctl documentation but I dont understand the differences betweeb load -w and load without -w. The same for unload. Can somebody explain me that difference?
Thanks for all.lmtpd is spawned each time the posftix daemon needs it. There's no ability to stop/start it outside of Postfix since it doesn't really apply - when the master postfix process has a message for lmtpd it fires it up. When that message is done, that process dies.
So at best, even if it could be done, the only thing you'd restart would be processes that are currently being handled by lmtpd. Given the nature of lmtpd that probably doesn't account for a lot.
dont understand the differences betweeb load -w and load without -w. The same for unload. Can somebody explain me that difference?
-w writes the change to the .plist, so that the process will be loaded/unloaded after a reboot.
Without the -w switch the process will be loaded/unloaded now, but will revert to its normal state after a reboot. -
Manually restart crs daemon in Cluster RAC 11gR2 (11.2)
In Cluster RAC 11g release2 (11.2) on Linux Platform (Red Hat Enterprise Linux Server release 5.3 ), if crs daemon fall down, is it possible to restart manually (in old version: init.crsd start) ? If yes, how?
Edited by: user6717729 on Jun 24, 2010 12:46 AMok I've opened another thread:
Manual restart CRS Daemon in Cluster RAC 11gR2 -
Have to keep restarting network daemon
I have my netowrk setup as DHCP as a static IP doesnt seem to want to work at all
This is a fresh install so I'm trying to download packages and it will download 20 or 30 megs and then suddenly quit. I have kill pacman, delete the db.lck file, and run /etc/rc.d/network restart in order for it to continue
I finally got a pacman -Syu to run all the way through and even after that it still continues to give me this problem
I dont believe it is hardware problem because I do not have this problem in Windows.
dmesg | grep eth0 just fills up my screen with lines that say eth0: link is up
Tried different network cable just to be sure, and that's not the issue
Thanks
Last edited by Marklar (2011-10-24 04:37:09)Module Size Used by
snd_hda_codec_hdmi 22092 4
nouveau 698515 1
snd_cmipci 32405 0
ttm 54360 1 nouveau
gameport 8163 1 snd_cmipci
drm_kms_helper 25409 1 nouveau
processor 24256 0
drm 183380 3 nouveau,ttm,drm_kms_helper
snd_opl3_lib 8726 1 snd_cmipci
snd_mpu401_uart 5979 1 snd_cmipci
snd_rawmidi 19519 1 snd_mpu401_uart
snd_seq_device 5268 2 snd_opl3_lib,snd_rawmidi
shpchp 26249 0
sg 25557 0
snd_hda_codec_realtek 294224 1
evdev 9530 0
i2c_algo_bit 5199 1 nouveau
mxm_wmi 1393 1 nouveau
video 11228 1 nouveau
snd_hda_intel 22122 0
snd_hda_codec 77927 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
i2c_i801 8187 0
intel_agp 10904 0
intel_gtt 14423 1 intel_agp
iTCO_wdt 12717 0
pcspkr 1819 0
i2c_core 20133 5 nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
iTCO_vendor_support 1929 1 iTCO_wdt
wmi 8411 1 mxm_wmi
snd_hwdep 6325 2 snd_opl3_lib,snd_hda_codec
snd_pcm 73856 4 snd_hda_codec_hdmi,snd_cmipci,snd_hda_intel,snd_hda_codec
snd_timer 19416 2 snd_opl3_lib,snd_pcm
snd 57786 12 snd_hda_codec_hdmi,snd_cmipci,snd_opl3_lib,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 6146 1 snd
snd_page_alloc 7121 2 snd_hda_intel,snd_pcm
pci_hotplug 25672 1 shpchp
mei 31249 0
button 4470 1 nouveau
r8169 42643 0
mii 3995 1 r8169
ext4 369556 3
mbcache 5817 1 ext4
jbd2 71074 1 ext4
crc16 1297 1 ext4
usbhid 35256 0
hid 81635 1 usbhid
sr_mod 14951 0
cdrom 36329 1 sr_mod
sd_mod 28307 5
pata_acpi 3376 0
xhci_hcd 70396 0
ata_piix 22005 4
libata 173297 2 pata_acpi,ata_piix
scsi_mod 131482 4 sg,sr_mod,sd_mod,libata
ehci_hcd 39511 0
usbcore 142544 4 usbhid,xhci_hcd,ehci_hcd
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation 2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1c.6 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 7 (rev b5)
00:1d.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation P67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 IDE interface: Intel Corporation 6 Series Chipset Family 4 port SATA IDE Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series Chipset Family SMBus Controller (rev 05)
00:1f.5 IDE interface: Intel Corporation 6 Series Chipset Family 2 port SATA IDE Controller (rev 05)
01:00.0 VGA compatible controller: nVidia Corporation Device 1201 (rev a1)
01:00.1 Audio device: nVidia Corporation Device 0e0c (rev a1)
03:00.0 PCI bridge: Device 1b21:1080 (rev 01)
04:00.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
05:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) -
MSI 6524 & XP SYSTEM RESTARTING (USB?)
Ive just bought a MSI 6524 mainboard, new HD 20g, new 256mb pc133, and new Celeron 2ghz processor, ive installed XP Pro and all updates, the bois is version 1.6 the latest i think.
The damn computer WONT turn off when a usb device is plugged in! unplug and all is fine, plugged in windows shuts down but then restarts straight away......
PLEASE HELP....turn of any wake on settings in bios
-
Problem with detecting USB devices.. something abt ehci-hcd??
Hi All,
I have a DELL E6410 laptop. I have a problem with connecting USB devices.
Whenever a power event (such as connecting/disconnecting of AC adaptor) happens, my laptop stops detecting any USB devices and any changes that happen on the USB ports. That is, say an external mouse is connected to the laptop, the mouse stops functioning, and if I connect a mouse/USB_stick or any such thing to the computer, the device is not detected.
dmesg output show that any connecting/disconnecting events are not detected by the computer. lsusb output too shows the same thing.
To solve the problem, I need to rmmod the module ehci-hcd and modprobe it back. That is, I have to run the commands rmmod ehci-hcd followed by modprobe ehci-hcd. Then, this problem goes away until the next power event happens.
This event does not happen all the time, but it happens very regularly.
Here are the kernel and laptop specs..
uname -a
Linux myhost 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011 x86_64 Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz GenuineIntel GNU/Linux
Kindly help me on this issue.
ThanksThis is the output of kernel.log when I unplug my AC adaptor with the external USB mouse connected.
Sep 12 11:18:33 localh ost kernel: [ 591.015557] EXT4-fs (sda6): re-mounted. Opts: commit=600
Sep 12 11:18:37 localhost kernel: [ 595.478866] ehci_hcd 0000:00:1a.0: PCI INT A disabled
Sep 12 11:18:37 localhost kernel: [ 595.478919] ehci_hcd 0000:00:1a.0: PME# enabled
Sep 12 11:18:37 localhost kernel: [ 595.498827] ehci_hcd 0000:00:1d.0: PCI INT A disabled
Sep 12 11:18:37 localhost kernel: [ 595.498877] ehci_hcd 0000:00:1d.0: PME# enabled
After this the the mouse goes dead (the light on the mouse also goes off).
If I disconnect the mouse at this stage, there is no change in kernel.log. If I the mouse back too, there is no change in kernel.log.
Now, when I turn the AC adaptor on, this is the output on kernel.log
Sep 12 11:22:16 localhost kernel: [ 813.917712] EXT4-fs (sda6): re-mounted. Opts: commit=0
Sep 12 11:22:16 localhost kernel: [ 813.977405] NMI watchdog enabled, takes one hw-pmu counter.
Sep 12 11:22:16 localhost kernel: [ 813.977453] NMI watchdog enabled, takes one hw-pmu counter.
Sep 12 11:22:16 localhost kernel: [ 813.980838] NMI watchdog enabled, takes one hw-pmu counter.
Sep 12 11:22:16 localhost kernel: [ 813.980874] NMI watchdog enabled, takes one hw-pmu counter.
Sep 12 11:22:16 localhost kernel: [ 814.075104] ehci_hcd 0000:00:1a.0: BAR 0: set to [mem 0xd6970000-0xd69703ff] (PCI address [0xd6970000-0xd69703ff])
Sep 12 11:22:16 localhost kernel: [ 814.075148] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Sep 12 11:22:16 localhost kernel: [ 814.075189] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
Sep 12 11:22:16 localhost kernel: [ 814.075256] ehci_hcd 0000:00:1a.0: PME# disabled
Sep 12 11:22:16 localhost kernel: [ 814.075279] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 12 11:22:16 localhost kernel: [ 814.075295] ehci_hcd 0000:00:1a.0: setting latency timer to 64
Sep 12 11:22:17 localhost kernel: [ 814.228224] ehci_hcd 0000:00:1d.0: BAR 0: set to [mem 0xd6950000-0xd69503ff] (PCI address [0xd6950000-0xd69503ff])
Sep 12 11:22:17 localhost kernel: [ 814.228246] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
Sep 12 11:22:17 localhost kernel: [ 814.228273] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
Sep 12 11:22:17 localhost kernel: [ 814.228310] ehci_hcd 0000:00:1d.0: PME# disabled
Sep 12 11:22:17 localhost kernel: [ 814.228324] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep 12 11:22:17 localhost kernel: [ 814.228333] ehci_hcd 0000:00:1d.0: setting latency timer to 64
Sep 12 11:22:17 localhost kernel: [ 814.614404] usb 2-1.1: reset low speed USB device number 3 using ehci_hcd
At this point, the mouse comes back to life (its light begins to glow) and I can move the mouse pointer on the screen.
The output of the grep command that rwd gave is too big (16000 lines) to be pasted here..
Thanks, -
What is wrong with email?!!
http://www.apple.com/support/icloud/systemstatus/
People reading this forum are just other users like you (who frankly already know there are a lot of frustrated users out there and cannot tell you anything you won't see in the above link). Send your feedback to http://www.apple.com/feedback/icloud.html -
my iphone4s has been restart...then something asking about delete from iphone? i tap it..then till now its been rebooting for hours..please help
drop the CAPS thats rude.
iforgot.apple.com there is a link for find my apple id click here
https://iforgot.apple.com/appleid?language=US-EN&returnURL=https://appleid.apple .com/cgi-bin/WebObjects/MyAppleId.woa&app_id=93&app_type=ext
Peace, Clyde -
LMS 4.2 User Defined Groups Empty after Daemon restart
Hello
I need some help here.
In order to get topology services to run on a non resolvable DNS server I have followed the instructions in the online help and got Topology Services to start. My issue now is that all my userdefined groups are empty and I can not edit them - it gives me a error message.
Checked the parent groups and these are as supposed - the system groups - subnet groups fx are also populated.
What do you advise?
I have read oither posts and some people were advised to restart crmdmgtd as in this thread:
net stop crmdmgtd
net start crmdmgtd
http://https://supportforums.cisco.com/message/3414498#3414498
Should I just follow the same steps? I can not see find this process in 4.2
Thanks Isaac
PS: These were the steps followed in order to make Topology Services to work.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The Cisco Prime LMS client must be able to resolve the hostname of the Cisco Prime LMS server to server's IP Address, through DNS.
If the Cisco Prime LMS server is not DNS resolvable, Cisco Prime LMS client can access it with the IP address itself, by performing the following steps:
Open the orb.properties file. Solaris or Soft Appliance: NMSROOT/lib/classpath Windows: NMSROOT\lib\classpath where NMSROOT is the directory where you have installed Cisco Prime LMS. Set the property as follows: jacorb.dns.enable=off Go to Admin > Trust Management > Local Server > Certificate Setup.
The Certificate Setup page appears. Enter the IP Address of the Cisco Prime LMS Server in the Hostname textbox. Populate the other columns as explained in the Online help for Administration of Cisco Prime LAN Management Solution 4.2. Click Apply to generate the self-signed certificate. Restart the daemons. See the Online help for Administration of Cisco Prime LAN Management Solution 4.2 for instructions. You will be able to launch Topology Services with the IP address itself.Hi Michel and thanks for the reply.
The "Physical Location" groups magically started working. I had tried to apply a bunch of device update packages a couple of days ago. I thought they all failed but maybe some of them actually applied. I have no idea but the 2 groups with a rule like this one are now populating:
Device.Hostname startswith "XYZ"
However, the groups with the rule below are still failing to populate in the device selector even though if I edit the group the "Objects matching criteria" list contains the correct members:
Device.Admin_responsibility equals "XYZ"
Admin_responsibility is user defined field 1 (Admin => Device Credential Settings => User Defined Fields).
If you mean "dynamic" in that they are supposed to automatically update then yes these are dynamic public groups. I had them defined this way for years in LMS 2.6, though the "dynamic" part never worked. I always had to go into group admin and manually refresh to get the groups to update. I have tried that several times in 4.1 with no luck.
-Jeff -
Failure to boot after restarting, no distinct pattern.
My Mac Pro has an issue where every third or fourth restart the mac will fail to boot, needing me to hold the power button until it turns off.
I get the grey apple and the spinning progress wheel for 30 seconds, then the screen stays grey and the apple is replaced by what looks like a circle with a diagonal bar through it. I believe this means something along the lines of 'No Bootable Directory Found'.
Before the 10.5.2 update this happened almost every restart. I'm using a Samsung Spinpoint 750gig drive as my boot drive, and the stock 500gig drive as a media disk.
I have tried several solutions. Repair permissions, Disk Utility from CD and run verify and repair disk, AHT extensive, TechTool Deluxe with surface scan, Format and Reinstall (twice), Memtest, NVRam.
Could the Samsung drive be bad even though I can't get any software to find a fault?Here is a console log of the most recent failure to boot. The events here are a restart, a failure to boot, a forced off and a power on. Hopefully this helps.
27/02/2008 02:31:00 com.apple.launchd[68] (0x10a650.Locum[2615]) Exited: Terminated
27/02/2008 02:31:57 com.apple.launchd[68] ([0x0-0xa00a].com.apple.dock[94]) Stray process with PGID equal to this dead job: PID 2586 PPID 1 DashboardClient
27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] *Wakein::CancelEvents: requested event type: wakepoweron
27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] *Wakein::CancelEvents: requested app name: com.elgato.eyetv
27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] *Wakein::CancelEvents: canceling wakepoweron - com.elgato.eyetv - 02/27/08 21:35:00
27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] *Wakein: 0 entries in power event schedule table
27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] *Wakein::ScheduleEvent: requested event type: wakepoweron
27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] *Wakein::ScheduleEvent: requested app name: com.elgato.eyetv
27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] *Wakein::ScheduleEvent: requested date: 02/27/08 21:35:00
27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] *Wakein: 1 entries in power event schedule table
27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] * date: 02/27/08 21:35:00
27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] * appName: com.elgato.eyetv
27/02/2008 02:31:57 [0x0-0x13013].com.elgato.eyetvhelper[106] * eventType: wakepoweron
27/02/2008 02:32:07 com.apple.loginwindow[23] Shutdown NOW!
27/02/2008 02:32:07 com.apple.loginwindow[23] System shutdown time has arrived
27/02/2008 02:32:07 com.apple.SystemStarter[16] Starting Aladdin USB daemon
27/02/2008 02:32:08 com.apple.SystemStarter[16] process already running on this system - daemon terminated!
27/02/2008 02:34:04 com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
27/02/2008 02:34:04 com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
27/02/2008 02:34:04 com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
27/02/2008 02:34:04 com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
27/02/2008 02:34:22 com.wacom.wacomtablet[79] TabletDriver[79]: ISO keyboard: OSI
27/02/2008 02:34:23 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[80]) Exited: Terminated
27/02/2008 02:34:23 com.apple.launchd[1] ([0x0-0x7007].com.wacom.TabletDriver[87]) Exited: Terminated
27/02/2008 02:34:23 com.apple.launchd[1] (com.wacom.wacomtablet[79]) Exited with exit code: 255
27/02/2008 02:34:23 com.apple.launchctl.Aqua[88] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/com.adobe.versioncueCS3.monitor.plist
27/02/2008 02:34:23 com.apple.launchd[69] (0x1010d0.VersionCueCS3monitor) Failed to check-in!
27/02/2008 02:34:24 com.wacom.wacomtablet[89] TabletDriver[89]: ISO keyboard: OSI
27/02/2008 02:34:31 [0x0-0x13013].com.elgato.eyetvhelper[115] EyeTV Helper version 3.0 build 267
27/02/2008 02:34:33 com.apple.SystemStarter[16] Starting Aladdin USB daemon
27/02/2008 02:38:48 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein::CancelEvents: requested event type: wakepoweron
27/02/2008 02:38:48 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein::CancelEvents: requested app name: com.elgato.eyetv
27/02/2008 02:38:48 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein::CancelEvents: canceling wakepoweron - com.elgato.eyetv - 02/27/08 21:35:00
27/02/2008 02:38:49 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein: 0 entries in power event schedule table
27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein::CancelEvents: requested event type: wakepoweron
27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein::CancelEvents: requested app name: com.elgato.eyetv
27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein: 0 entries in power event schedule table
27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein::ScheduleEvent: requested event type: wakepoweron
27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein::ScheduleEvent: requested app name: com.elgato.eyetv
27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein::ScheduleEvent: requested date: 02/27/08 21:35:00
27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] *Wakein: 1 entries in power event schedule table
27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] * date: 02/27/08 21:35:00
27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] * appName: com.elgato.eyetv
27/02/2008 02:38:51 [0x0-0x1b01b].com.elgato.eyetv[158] * eventType: wakepoweron
27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::CancelEvents: requested event type: wakepoweron
27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::CancelEvents: requested app name: com.elgato.eyetv
27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::CancelEvents: canceling wakepoweron - com.elgato.eyetv - 02/27/08 21:35:00
27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein: 0 entries in power event schedule table
27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::ScheduleEvent: requested event type: wakepoweron
27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::ScheduleEvent: requested app name: com.elgato.eyetv
27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::ScheduleEvent: requested date: 02/27/08 21:35:00
27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein: 1 entries in power event schedule table
27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] * date: 02/27/08 21:35:00
27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] * appName: com.elgato.eyetv
27/02/2008 02:39:38 [0x0-0x13013].com.elgato.eyetvhelper[115] * eventType: wakepoweron
27/02/2008 02:39:48 com.apple.loginwindow[23] Shutdown NOW!
27/02/2008 02:39:48 com.apple.loginwindow[23] System shutdown time has arrived
27/02/2008 02:39:48 com.apple.SystemStarter[16] Starting Aladdin USB daemon
27/02/2008 02:39:48 com.apple.SystemStarter[16] process already running on this system - daemon terminated!
27/02/2008 02:40:11 com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
27/02/2008 02:40:11 com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
27/02/2008 02:40:11 com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
27/02/2008 02:40:11 com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
27/02/2008 02:40:30 com.wacom.wacomtablet[79] TabletDriver[79]: ISO keyboard: OSI
27/02/2008 02:40:30 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[80]) Exited: Terminated
27/02/2008 02:40:30 com.apple.launchd[1] ([0x0-0x7007].com.wacom.TabletDriver[87]) Exited: Terminated
27/02/2008 02:40:30 com.apple.launchd[1] (com.wacom.wacomtablet[79]) Exited with exit code: 255
27/02/2008 02:40:30 com.apple.launchctl.Aqua[88] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/com.adobe.versioncueCS3.monitor.plist
27/02/2008 02:40:30 Dock[97] _DESCRegisterDockExtraClient failed 268435459
27/02/2008 02:40:31 com.apple.launchd[69] (0x1010d0.VersionCueCS3monitor) Failed to check-in!
27/02/2008 02:40:31 com.wacom.wacomtablet[89] TabletDriver[89]: ISO keyboard: OSI
27/02/2008 02:40:37 [0x0-0x13013].com.elgato.eyetvhelper[115] EyeTV Helper version 3.0 build 267
27/02/2008 02:40:40 com.apple.SystemStarter[16] Starting Aladdin USB daemon
27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::CancelEvents: requested event type: wakepoweron
27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::CancelEvents: requested app name: com.elgato.eyetv
27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::CancelEvents: canceling wakepoweron - com.elgato.eyetv - 02/27/08 21:35:00
27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein: 0 entries in power event schedule table
27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::ScheduleEvent: requested event type: wakepoweron
27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::ScheduleEvent: requested app name: com.elgato.eyetv
27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein::ScheduleEvent: requested date: 02/27/08 21:35:00
27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] *Wakein: 1 entries in power event schedule table
27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] * date: 02/27/08 21:35:00
27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] * appName: com.elgato.eyetv
27/02/2008 02:40:45 [0x0-0x13013].com.elgato.eyetvhelper[115] * eventType: wakepoweron
27/02/2008 02:40:45 com.apple.loginwindow[23] Shutdown NOW!
27/02/2008 02:40:45 com.apple.loginwindow[23] System shutdown time has arrived
27/02/2008 02:40:45 com.apple.SystemStarter[16] Starting Aladdin USB daemon
27/02/2008 02:40:45 com.apple.SystemStarter[16] process already running on this system - daemon terminated!
27/02/2008 04:06:51 com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
27/02/2008 04:06:51 com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
27/02/2008 04:06:51 com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
27/02/2008 04:06:51 com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
27/02/2008 04:07:07 com.wacom.wacomtablet[79] TabletDriver[79]: ISO keyboard: OSI
27/02/2008 04:07:07 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[80]) Exited: Terminated
27/02/2008 04:07:07 com.apple.launchd[1] ([0x0-0x7007].com.wacom.TabletDriver[87]) Exited: Terminated
27/02/2008 04:07:07 com.apple.launchd[1] (com.wacom.wacomtablet[79]) Exited with exit code: 255
27/02/2008 04:07:07 com.apple.launchctl.Aqua[88] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/com.adobe.versioncueCS3.monitor.plist
27/02/2008 04:07:07 Dock[96] _DESCRegisterDockExtraClient failed 268435459
27/02/2008 04:07:08 com.wacom.wacomtablet[89] TabletDriver[89]: ISO keyboard: OSI
27/02/2008 04:07:08 com.apple.launchd[73] (0x1010d0.VersionCueCS3monitor) Failed to check-in!
27/02/2008 04:07:15 [0x0-0x13013].com.elgato.eyetvhelper[115] EyeTV Helper version 3.0 build 267
27/02/2008 04:07:18 com.apple.SystemStarter[16] Starting Aladdin USB daemon -
Is there any way to connect my 2011 macbook pro to my PC laptop (Dell) so that I can get files off of the Mac? The display on the pro is out and I've got a black screen. The computer turns on. Actually it turned on one time after many tries and when I took it the Mac store the guy hit restart before I could stop him. I don't have another Mac to back up files to in restart 7 mode and I can't see my external hard drive to copy to when the computer has no display, so I am at a loss on how to get the files. I would like to get them before I send in for repairs. Any suggestions are appreciated.
The only other thing I can think of is to pull the drive out and hook it to another machine with a USB enclosure. Something like this:
http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=sr_1_2?ie=UTF8&qid=1388312417&sr=8-2&keywords=2.5+enclosure
Then you could read it like an external USB drive. It's easy to open up and get the drive out. -
USB devices all of a sudden no longer recognized in windows 7
Hi,
I am using a HP Pavilion Simline s5550nl edition with windows 7 home premium (64-bit) since 1.5 years. Never had any problems until 3 days ago. Since 3 days suddenly some new devices, already plugged-in devices and previously used devices are no longer recognized (USB-device not recognized-error after plug-in).
I used an USB-mouse, USB-keyboard, Smartcard-reader, Sony Story 1.5TB External HDD, USB WebCam. They al worked fine.
3 Days ago I bought a WD Elements 2 TB External HDD. After plugging in, it was not recognized at first. Replugging it in it was recognized, but trying to open the drive in Explorer, it gave a not-formatted-error (while the disk should have been pre-formatted for Windows 7). However, i tried to format the disk, but it could not reach it any more. After rebooting the system the WD elements HDD gave the USB-device-not-recognized-error, using all other USB-ports didn't change that. In fact my Sony External HDD was no longer reachable either. Unplugging and replugging it in gave the same USB-device-not-recognized-error. Trying previously flawless working USB-devices all gave the same USB-device-not-recognized-errors (USB-flash disk 4GB, External HDD 2.5inch 160GB, USB-/card reader HUB, iPhone).
I then tried to connect my Sony and WD external HDD on my other computer with windows XP SP3. They were recognized within seconds and working fine (also the WD elements External HDD indeed turned out to be pre-formatted).
Strangely enough my USB-mouse, USB-keyboard and smartcard-reader kept being recognized at plug-in. Furthermore, my printers (connected over LAN) and NAS (connected over LAN) were usable without any problem. I did not encounter any other problems in functionality of windows. I then thought it might be a corrupted general USB-driver for mass-storage or something, so I started to google this problem. Things I have done so far (before each step I unplugged all USB-devices, rebooted and reconnected the devices):
- Turning computer off, unplug power-cable for 2 minutes, reboot.
- Updating BIOS to version 6.04 (was running version 6.02).
- Uninstalling all USB-devices/mainhubs etc in devicemanagement, automatic reinstallation at restart.
- Try installing newer USB-drivers for mainhubs, messages the installed drivers are already the latest.
- Uninstalling all 'hidden' USB-devices.
- Trying to go back to configuration of 1 day ago (maximum i could go back), resulted in an error that the file might be corrupted.
- Turning computer off, unplug power-cable overnight, reboot.
- Running HP-systemdiagnostics: all passed.
- Running Norman anti-virus scan (latest update): no infection.
- Again uninstalling all USB-devices/mainhubs etc, automatic reinstallation at restart.
I also noticed that during the night before this malfunction appeared (so actually several hours), on january 20th, an automated microsoft critical update was installed (some anti-spyware definition update). I am now thinking it might still be a driver-problem of some sort of general USB-mass storage driver or due to this microsoft update or maybe some clever virus.
I no ordered a Recovery disk (never had to use one, so did not jet own one), to recover windows and if that doesn't help reinstall it. However I hope that anyone can bring up a solution that I am overlooking?
D. BerksOK, meanwhile I found that only uninstalling the USB2-driver enables the USB-ports again. Uninstalling it makes al devices recognizable, whil reintsalling it immediately makes all USB-devices unrecognizable.
I tried updating the driver to the latest version, deleting it (after reboot an automated reinstall is triggered), but nothing helps. As if soething that stays in the system makes USB2 to corrupt USB-channeling or something.
I strongly believe that it has something to do with the windows-update, but I can nowhere as a question about it to microsoft (will cost 70 euro's!).
Does anybody knows what this could be? Or better: knows of a solution?
Tanks,
D. Berks -
Macbook Pro freezes when I plug in USB
I've not changed anything about my Macbook Pro (13" early 2011) except upgrade to Mountain Lion (10.8.2) and now when I plug in my USB hub (which only has my keyboard, mouse and printer connected to it) the computer freezes completely and I have to press and hold the power button to restart it. If it doesn't do that, then it just doesn't recognise that the USB has been plugged in at all.
Is this an issue with the USB port or something else? I still have AppleCare so will take it to an Apple Store if I can't find out how to solve this problem myself. Anyone had this issue and found a solution?
Thanks.Did you also try this when booted to the Recovery HD volume? If not then give this a try. In addition, while troubleshooting unplug all USB devices (includeing the keyboard) and try with another device such as only the mouse, which should allow you to move the cursor on screen. What you've done so far is only half of the picture, and doing this with the mouse both in normal boot and when booted to the Recovery HD partition would help determine what the problem is.
It is sounding like the issue is not with the printer and instead is with your computer, so hopefully its just a software configuration snafu, but it could be a problem with hardware.
If you find the mouse will not properly work in any port when booted to the Recovery HD partition, then run the Apple Hardware Test suite (see here: http://reviews.cnet.com/8301-13727_7-57352461-263/how-to-invoke-and-interpret-th e-apple-hardware-tests/, but do not run the "extended" test) and see if they bring up any problems. If so then write them down and post what they are here. -
Remove daemon from writing to syslogd
please view this vid to see what i need help on:
http://screencast.com/t/ogh2VUxH
i need to get rid of this **** daemon or something that keeps writing to the syslogd even when i think i uninstalled incorrectly.
please help my mac geniusesgreat post! heres what i found with the last link:
Launchd Jobs
/Library/LaunchAgents
FS Name: Bundle ID:
com.hp.launchurlagent.plist com.hp.launchurlagent
com.netopia.timbuktu.pro.host.plist com.netopia.timbuktu.pro.host
/Users/marcoponce/Library/LaunchAgents
FS Name: Bundle ID:
com.google.keystone.agent.plist com.google.keystone.user.agent
net.infinite-labs.PlugSuit.Agent.plist net.infinite-labs.PlugSuit.Agent
/Library/LaunchDaemons
FS Name: Bundle ID:
com.adobe.versioncueCS3.plist com.adobe.versioncueCS3
com.vmware.launchd.vmware.plist com.vmware.launchd.vmware
i went ahead and deleted the "com.netopia.timbuktu.pro.host.plist" and disabled it with the first app... about to restart and then reply with the results!
awesome!
anyother links to help speed up my mac? i have onyx btw dont use it much -
i just recently moved and when i went to connect everything back up to my lap top i found that my usb sound card
(viewed here http://creative.com/products/product.asp?category=&subcategory=207&product=54&n av=2 was not putting out sound. i've tried everything to get it to work and i was wondering if there was more i could do. so far i have done system restore, uninstalled every sound driver and reinstalled them and the sound card seems to be working i just dont hear anything. the diaognostics checks ok. i need some help i need my music!!!Message Edited by Centrix on 09-0-2005 0:35 PMCentrix wrote:
i just recently moved and when i went to connect everything back up to my lap top i found that my usb sound card
(viewed here http://creative.com/products/product.asp?category=&subcategory=207&product=54&n av=2 was not putting out sound. i've tried everything to get it to work and i was wondering if there was more i could do. so far i have done system restore, uninstalled every sound driver and reinstalled them and the sound card seems to be working i just dont hear anything. the diaognostics checks ok. i need some help i need my music!!!Message Edited by Centrix on 09-0-2005 0:35 PM
Which OS you are using (W2k or XP)?
Have you tried to connect it "on the fly".
Remove USB cable and restart you laptop. Then when Windoes is up and running, connect the cards USB cable back to laptops USB port.
Now OS should give you an information 'bout Found/Installing New USB Device (or something like that) if your card is not properly set/installed before. If it asks for drivers let it look the best (since drivers are installed already). etc.
.jtp
Maybe you are looking for
-
When creating the dynamic PDF form in LiveCycle Designer ES 8.2.x, the file size is < 200K. When opening in Acrobat 9 Pro and extending to Acrobat Reader, the file size > 1.2MB. Is there any way to reduce the file size? Thanks! -JoeF
-
When I try to file messages into mail folders or delete messages, they reappear back into my mailbox. Sometimes after I have read and deleted a message, it pops back into the inbox marked as unread. This problem only began occuring after I installed
-
Problem with CLAF_CLASSIFICATION_OF_OBJECTS
Hi, I calling Function module 'CLAF_CLASSIFICATION_OF_OBJECTS' for a given Class and characteristic description , I am reading its value. The characteristic value is not mandatory to maitained , so when no data was maintained for a given Class and
-
How can I cancel a pre-order movie?
HI, I pre-ordered a movie a few weeks ago and I want to cancel it, wow can I do it please?
-
Reporting Essbase cubes from Answers
I followed the documentation available in support site to configure Essbase cubes in RPD in a Solaris environment. I got the Essbase client installed, added required variables (HYPERION_HOME, ESSBASEPATH, ARBORPATH) and cahnged LD_LIBRARY_PATH variab