Restart WRT160NL from WebGUI

Is there any way yo restart the WRT160NL from the web interface? I've had several routers before this Linksys and all of them had this option. In the web GUI of the WRT I can't find the way to do it and I have no other solution of unplugging it and plugging again.
Thanks in advance for your help!
Vuela, vuela, V.O.M.I.T.O.N.!!!

I am looking for the same answer... If only we could access the command line... is it possible? I'd issue a 'reboot' command
Meanwhile I gave it a thought and THERE is a way to reboot the router (haven't tested it yet but I think it works): restoring a configuration makes the router reboot after the process is finished. I know it is a bit lame, but more lame is not having that option (smc has it).
You can always give it a try, but I really don't understand why Linksys is not implementing the reboot router option (at least i haven't found it anywhere!!)

Similar Messages

  • How can I "clear" my old IPad? I'll sell it and must restart it from the begining as new, create new Apple ID,etc?

    How can I "clear" my old IPad ? I'll sell it and must restart it from the begining as a new one. To leve it as when I had purchased it.

    Settings>General>Reset>Erase All Content and Settings

  • How to return from WEBGUI to WDA?

    Dear Experts,
    i am in a tricky situation, and I hope you can help me with some wise advise. I have read dozens of threads, but still haven't found the absolute satisfying answer.
    The requirements:
    I am looking for a solution to call a SAP GUI Transaction (take SE11 as an example!)  from WD abap program, and when SE11 is done than continue with WD.
    This would be very good if the SE11 transaction would not open ina  new browser, but the same as the one is used by WDA.
    What I have until now:
    First I have found a solutin with iViews: Re: Calling a transaction code , but we do not have Portal, so it is not an option unfortunately
    Than found ITS WEBGUI : Re: To call standard tcode in webdynpro( thru webgui) : Assistance class This is good, but this solution calls Transaction in a separete new window.
    So, I wanted to use suspend and resueme plugs to WEBGUI: http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/19bf8c16f25d7ae10000000a11466f/content.htm But as it is said there:
    "It is more difficult to create a suspend call to a non-WDA application because modifications are also required in the secondary application."
    So my questions are:
    Is there any way to return/redirect from WEBGUI to the WD application from which it was called before? If yes, how?
    Is there any better way (even if it is a tricky one) to fulfill the requirements above under the given circumstances?
    Your help is very-very welcome and appreciated so much!
    Thanks,
    Gyula

    Anu,
    Please provide the basics about your environment like jdev version you are using...
    Your jspx page home.jspx contains the task flow as region?
    Or do you navigate from the jspx page to an other page?
    Timo

  • HT202159 Tried restarting download from the "Purchases" tab but the app comes out with "an error ocurred " message and I the button next to it is grey without any text or action. Please help, cannot dowload bad piggies game

    Tried restarting download from the "Purchases" tab but the app comes out with "an error ocurred " message and I the button next to it is grey without any text or action. Please help, cannot dowload bad piggies game

    Hi aaronvilla,
    Sorry to hear you are having issues with your iTunes Store purchase.   The following information should help you with this:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    To report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase, follow these steps:
    Find the email receipt for your purchase.
    Click Report a Problem under the app that is having the issue.
    When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
    Click Report a Problem next to the item you are having an issue with.
    From the Choose Problem dropdown menu, choose the appropriate issue.
    Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
    Click Submit to have your issue reviewed.
    Hope this helps ....
    - Judy

  • Workflow Restart Error from transaction SWPR

    Hi workflow Gurus,
    I am facing problem restarting workflow from transaction SWPR. Instead of restarting workflow I am getting an error message as “unable to start subflow (ID: XYZ, node: abc)”.
    How can I restart the workflow?
    Regards,
    Abhishek.

    The problem wad caused by mistake in workflow template WS75100021. After task 'Create test log' there is a loop. The end condition of the loop is 'test log is Submitted or Validated'. But the test log can have also status 'Closed' (The tester created the test log and close it immediately). It cause endless loop.
    You can proceed following manual steps.
    1. Go to transaction SWDD (Workflow Builder).
    2. Open workflow template WS75100021.
    3. Open loop number 000177
    4. Change the condition this way
    &FOPC_CASEL.STATUS& = IFO09 or
    &FOPC_CASEL.STATUS& = IFO10 or
    &FOPC_CASEL.STATUS& = IFO07
    5. Activate the workflow template
    if it helpful rewards points are appreciated

  • Where is the shutdown/restart buttons from the logout dialog

    After I followed the almost all postinstall in Howto(s) from Archlinux Wiki, I lost the shutdown/restart buttons from the logout dialog box.
    Where are they?
    I set in the kcontrol:
    KDE Components -> Session Manager -> General (Offer shutdown options) and Default Shutdown Option (Turn off computer)
    has no effect.
    Could someone give me a hint?
    Thanks.
    Regards,
    Jerry

    dauphin wrote:
    See if this thread helps:
    http://bbs.archlinux.org/viewtopic.php?t=11624
    Yep, it works.
    Remove
    export DISPLAY=localhost:0
    I did not read it carefully
    I put
    xhost+ localhost
    export DISPLAY=localhost:0
    together in my user .bash_profile
    I should split this:
    xhost+ localhost
    in my user .bash_profile
    and
    export DISPLAY=localhost:0
    in my root's .xinitrc
    That should do the job.

  • Since I upgrade to Yosemite, my MacBook started to act like a PC. I need to restart it from time to time and very often. Also when I plug my headset, it dosent recognize it and I need to "Preferences" to selected.

    I'm Apple promoter and love it. But, since I upgrade to Yosemite, my MacBook started to act like a PC. I need to restart it from time to time and very often. Also when I plug my headset, it dosent recognize it and I need to "Preferences" to select it manually. So many small issus but acting like PC it is very annoying, how can I recommend Apple for people?

    Activity Monitor - Mavericks  also Yosemite
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy
    Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

  • My ex boyfriend has sold me his old mac (white) and i am looking to restart it from factory using my friends mac cd however the disc is ejecting when i restart and hit c. what should i do?

    My ex boyfriend has sold me his old mac (white) and i am looking to restart it from factory using my friends mac cd however the disc is ejecting when i restart and hit c. what should i do?

    The install DVD's are specific to the model they shipped with.....if your friends Mac is not the same exact model it will not work.....plus I do not think it is totally legal.....

  • I have installed windows 7 into mac 10.6 after complete it restart and from than its display is blank and nthing can happen it takes more than 3 hr so now what should i do?

    i have installed windows 7 into mac 10.6 after complete it restart and from than its display is blank and nthing can happen it takes more than 3 hr so now what should i do?

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • HT201412 i have facing a problem, my i phone is not workin properly, when i powered on then apper passcode window but after putting passcode then after some time automaiclly restart but from passcode window i can not enter further.

    i have facing a problem, my i phone is not workin properly, when i powered on then apper passcode window but after putting passcode then after some time automaiclly restart but from passcode window i can not enter further.

    Okay. You are not entering the correct passcode. If you forgot or it is not taking your passcode then you will have to restore.
    See http://support.apple.com/kb/HT4113

  • Print from Webgui

    Hi Experts,
    We are able to print from WEBGUI using the SAP help portal link
    https://help.sap.com/saphelp_nwmobile711/helpdata/en/56/4c4e3c57f40a40e10000000a114084/content.htm
    Is it possible to print from the WEBGUI without going through a PDF generation.?
    Thanks & Regards
    Thiru

    Dear Thiru,
    if I understand correctly you use the frontend printing (Access Method F or G) for WebGUI.
    In this case only PDF can be used because the print data can not be processed on the frontend in any other way.
    However, if local Access Methods (C or L) is used, then other formats can be used too.
    Best regards,
    Laszlo

  • Restart tomcat from JSP----recall for jsp guru's

    hi thr
    I have buid a web based portal which give administrator power to do changes but to make these changes i need to restart tomcat server but my users are not It guys they found it very difficult to it.Is there anyway that i can restart server programatically.from JSP page using Java beans.Any idea will be helpful.
    Thanks in advance

    thanks guys i will go through that link but is there any code sample or a logic which can give idea how this works.
    Just like is we go to JRUN admin. we can start or restart server from front end in jsp.

  • Software Updater ran, restarted, booted from external FW HD for no reason??

    I did a Software Update yesterday and got the latest iWeb and Quicktime. I was then prompted to restart the computer, it restarted and for some reason used by backup external FW HD as the startup disc. The internal drive is, and has always been, the startup disc. While running from the backup drive, I went Startup Disk in System Prefs, selected the internal drive and restarted. It restarted from the internal drive perfectly. I recently ran Drive Genius on the internal and external drives and the permissions are repaired nightly when SuperDuper makes an overnight Smart Backup of my system... the internal drive on my iMac was just replaced by Apple less than a month ago. Can't figure why the internal drive wouldn't get used. Why might the system have randomly elected to use the external FW HD as the boot drive?
    iMac G5   Mac OS X (10.4.6)  

    I don't have an answer for you, because I've never seen that behavior, but suggest that you unmount and power-off any external HDs while doing updates. That will preclude that from ever happening again.

  • Printing to local print device from WEBGUI

    Hi SAP expert
    Got a question regarding WEBGUI priniting.
    In SAPGUI when you select print to LOCL, it print to the PC default print device, but if we print via a WEBGUI screen, the printing output to a PDF file first, we can then print from the PDF file.
    Is it possible to print from the WEBGUI without going through a PDF generation? or make WEBGUI understand the local print device?
    Any help or suggestion will be most appreciated.
    Edited by: Jim Boyden on Sep 4, 2008 7:49 AM

    As far as i remember is not possible to print to LOCL from a webgui session (i can't remember exactly why)..
    Try configuring your default printer as a network printer in SAP with method F or U and you'll be fine.
    Regards
    Juan

  • Launching a new browser from webGUI

    Is using mixed mode the best/easiest way to launch a new browswer passing parameters during a webGUI session?
    Is there a simple way directly from ABAP?  I tried using embedded JavaScript in ABAP, but didn't work.
    Thanks,
    Brian

    Jan,
    Good questions...
    By "mixed mode", I mean the ITS mode where it automatically uses SAP GUI for HTML to display screens when it can not find a template.
    We have a an ABAP report that is being called via webGUI from an outside application.  The users would like to click on a line of the report and "drill down" in a new browser window.  The "drill down" is to a URL that accepts parameters and does some kind of database lookup in PeopleSoft (dirty word, I know), then displays an HTML report.
    I think I may have found a solution last night.  There is a function called "ITS_BROWSER_WINDOW_OPEN" that appears to do exactly what I need.  I just need to test the parameter passing, etc...
    If you know of another way, please let me know as I am not 100% confident in the function module yet.
    Thanks,
    Brian

Maybe you are looking for