Restart your computer by holding the power......

This morning i was fooling around with a /usr/local file, i accidently deleted it and the computer stopped responding, so i held the power button for a few seconds and the computer turned off. Upon pressing it again, the apple logo appeared, followed by a black screen with a black box inside it saying restart your computer by holding the power button for a few seconds... so i did that, and restarted the computer.. Nothing, the same box appeared again, Kept trying and trying..
Please help me identify the problem and solution. Thanks

Just recently I tried to upgrade my vuze and install limewire and upon installation I suddenly get a gray tint come down over the screen and a multi language message that says 'you need ot restart your computer. hold down the power button for several seconds or press the restart button'. the only way out of this screen is to, as it tells me hold down the power button and stress out my computer. can someone help? I have read up on a similar problem that happens to people at start up but this is particular to these two programs only for me so far...

Similar Messages

I have a MacBook Pro 13.3 OS- MAC OS X LION.Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.

I have a MacBook Pro 13.3 OS- MAC OS X LION.
Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.
I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.
Thank you for any help in this regard that comes fast.

The details of the kernel-panic report is as follows-
Interval Since Last Panic Report: 1458653 sec
Panics Since Last Report:          6
Anonymous UUID:                    70BA6A**************************************************
Sun Sep 16 23:00:13 2012
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff8000290560, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000800028, CR3: 0x000000000a509005, CR4: 0x00000000001606e0
RAX: 0x0000000000000001, RBX: 0x0000000000820000, RCX: 0xffffff801122dc40, RDX: 0x0000000000020501
RSP: 0xffffff80ef3d3da0, RBP: 0xffffff80ef3d3dc0, RSI: 0x000000002b1d78b6, RDI: 0xffffff800342d280
R8: 0xffffff80ef3d3f08, R9: 0xffffff80ef3d3ef8, R10: 0x000000010d901000, R11: 0x0000000000000206
R12: 0xffffff800342d280, R13: 0x0000000000000000, R14: 0xffffff8011cd6500, R15: 0x0000000000800000
RFL: 0x0000000000010206, RIP: 0xffffff8000290560, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000800028, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80ef3d3a50 : 0xffffff8000220792
0xffffff80ef3d3ad0 : 0xffffff80002c4794
0xffffff80ef3d3c80 : 0xffffff80002da55d
0xffffff80ef3d3ca0 : 0xffffff8000290560
0xffffff80ef3d3dc0 : 0xffffff800026c9c3
0xffffff80ef3d3f40 : 0xffffff80002c3fbb
0xffffff80ef3d3fb0 : 0xffffff80002da481
BSD process name corresponding to current thread: fsck_hfs
Mac OS version:
11E2620
Kernel version:
Darwin Kernel Version 11.4.2: Wed May 30 20:13:51 PDT 2012; root:xnu-1699.31.2~1/RELEASE_X86_64
Kernel UUID: 25EC645A-8793-3201-8D0A-23EA280EC755
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 4850001132
last loaded kext at 1796984176: com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2 (addr 0xffffff7f80e16000, size 57344)
loaded kexts:
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2
com.apple.driver.AppleUSBTCButtons    227.6
com.apple.driver.AppleUSBTCKeyEventDriver    227.6
com.apple.driver.AppleUSBTCKeyboard    227.6
com.apple.driver.AppleIRController    312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.SCSITaskUserClient    3.2.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCISerialATAPI    2.0.3
com.apple.iokit.IOAHCIBlockStorage    2.0.4
com.apple.driver.AppleFWOHCI    4.8.9
com.apple.driver.AirPort.Brcm4331    560.7.21
com.apple.driver.AppleSDXC    1.2.2
com.apple.driver.AppleUSBHub    5.0.8
com.apple.iokit.AppleBCM5701Ethernet    3.2.4b8
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleAHCIPort    2.3.0
com.apple.driver.AppleUSBEHCI    5.0.7
com.apple.driver.AppleUSBXHCI    1.0.7
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.3
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
com.apple.driver.AppleUSBBluetoothHCIController    4.0.7f2
com.apple.iokit.IOBluetoothFamily    4.0.7f2
com.apple.driver.AppleFileSystemDriver    13
com.apple.driver.AppleUSBMultitouch    230.5
com.apple.driver.AppleThunderboltDPInAdapter    1.8.4
com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.4
com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.5
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.driver.AppleUSBMergeNub    5.0.7
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.driver.AppleThunderboltNHI    1.6.0
com.apple.iokit.IOThunderboltFamily    2.0.3
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
com.apple.iokit.IOFireWireFamily    4.4.5
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IOEthernetAVBController    1.0.1b1
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IOUSBFamily    5.0.8
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.5
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    331.7
com.apple.iokit.IOStorageFamily    1.7.2
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4

"You need to restart your computer. Hold down the power button for seve..."

Hello,
I have recently been getting this same message "You need to restart your computer. Hold down the power button for several seconds or press the Restart button." whenever I start up my computer. It happens about 95% of the time. I have been reading on different forums that I should reset the PRam and the NVRam and I have been doing so and it does help as it does EVENTUALLY start up (sometimes takes me 5-10 min. to get it to start up).
I have also read that it may be the RAM that is loose, so I did check that and made sure that the ram is properly placed (which it is).
I don't know what else I can do. Should I reformat and reinstall Mac OS X?
Here is the exact error form the dump:
IOAPIC: Version 0x20 Vectors 64:87
AppleACPIPlatformExpert::start failed
panic(cpu 0 caller 0x55c095): "Unable to find driver for this platform: \"Macbook 2,1\".\n"@/SourceCache/xnu/xnu-1504.9.26/iokit/Kernel/IOPlatformExpert.cpp:1389
Debugger called: <panic>

Well just got around to installing the new HDD and RAM yesterday, and I am sad to say... that the problem persists. :/
I reseated the memory and made sure they were in there properly, and I also installed the HDD and ran DiskUtility before I erased/reformatted and installed a fresh version of MacOSX Leopard, then updated to Snow Leopard.
As long as I am using my computer everything works fine, the problem occurs when the machine is shut off or put to sleep for a long period of time. Because when I shut it off and turn it right back on a few minutes later it works, or if I shut the lid and open it 10-20 min. later everything works fine, it's only when the machine is off or asleep for long periods of time.
So, I do not know what else can be wrong.
Should I try to take out the old RAM and just leave the new module in and see if that works out? See if that specific module is faulty?

When i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

when i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

On startup: "You need to restart your computer. Hold down ..."

When I start up from system folder 10.4.3 on hard disk, I get this message:
"You need to restart your computer. Hold down the Poweer button for several seconds or press the Restart button."
When I do this, my eMac restarts but returns to this very same message.
I did recently fix disk permissions using Hard Disk Utility. Tech Tools program reports no failures.
How can I restart my computer?

Find some body that can download and and burn you a copy of techtool 3.0.4 contact micromat and see if they know of a way to roll back a repair. Diskwarrior might help. There again check for the version number compatibility. Utilities are not like they use to be on OS9 and below; here you could use a version designed for lower OS and get by using it.
Todays utilities are based on the operating system themselves. There was a Major change in the version of UNIX used in OS X.3 and X.4 previously they used BSD (Berkley Systems Development) originated my Berkley University. Apple had to pay a Royalty payment for each copy sold. OSX uses FreeBSD UNIX which originally started from BSD UNIX; but, was taken over by the General UNIX community under a License like Mozilla uses for FIreFox and others. Anyway it can be used Royalty free. What's better is FreeBSD is constantly being improved literally daiyly; and therefore is much improved.
I digress. because of these differences the utilities must be written for the differences in code. And what worked on one doesn't on the other.

What caused "You need to restart your computer. Hold down the Power button for several seconds or push the restart button."

This was displayed in four lanuages. When I restarted I was asked to submit an error report. The gave programmer details and indicated my OS 10.4 had quit. I was reading a news article on DailyMail.co.uk at the time.
I ran a Sophos antivirus scan on the whole disk and no threats were identified.
This has apparently happened a couple times previously. I thought the computer had not booted up properly since it had a black box where this message appeared and the machine was unresponsive.
Any suggestsions for cause and/or solution.

Apple won't work on it anymore. And, take it from me (hard experience: three boards changed and the G5 finally croaked from the graphics chip problem) you don't want to bring it to an AASP either, because if they are able to get a new logic board from Apple, it will croak in short time also. These were not refurbed properly. And, by now, the caps on a refurbed board will be ancient, anyway. In addition, there is a serious potential issue with the graphics chip. There was a repair extension in effect for both issues, the caps and the chip, but it's long since gone.
There might also be bad caps in the power supply.
Those three bad caps, and possibly others, are enough to bring this machine down.
There are some delicate soldering skills involved in replacing the caps. Most people with experience recommend practising first on a disposable board.
You can get a set of the caps which will fit properly from
http://jimwarholic.com/2008/07/how-to-repair-apple-imac-g5.php
There's also badcaps, who I think will work on these.
http://www.badcaps.net/
Also have a look at the posts inside these threads from resident expert spudnuty.
https://discussions.apple.com/thread/2287036?threadID=2287036&tstart=0
https://discussions.apple.com/message/11896037?messageID=11896037#11896037
And there are one or two others who will do the repairs. I can't remember right now, but I'll look into it and post here again, probably tomorrow.
Basically, I don't think you want to put any big money into this.
EDIT: just remembered another. There was another one located in Oregon and I think he's now out of business.
http://www.dttservice.com/imacg5.html
Get the caps and maybe have some local guy work on it.
Message was edited by: WZZZ

When I restart my computer and hold the option key after creating a bootable usb with windows 7 and partitioning only the original partition shows up. Not the windows one or the bootable usb.

     Okay so first things first this isn't the newest macbook pro. When I open about my mac and go to system report it says it is a Macbook Pro 3,1 and the Boot Rom Version say MBP31.0070.B07. Originally when starting up Boot Camp Assistant there where only two options, the "create windows 7 bootable usb" was not there at all. So after some editing and helpful tutorials I was able to get the option show up and created a bootable usb with windows 7 and downloaded the support software onto a separate flash drive. Finally I did the last step and created a second partition for windows. Once the process is complete my computer automatically restarts.
     This is where the problem is. Once my computer makes the booting up sound it doesn't load up windows it gets stuck on a apple logo as if it's trying to reastart normally and can't. So I shut down and this time I hold down the option key during start up. It brings up the main partition and some recovery thing but no windows partiton and no bootable usb.
     I forgot to mention that I am running OS X 10.9.3. Okay any body want to help me out? Iv'e been at this for hours and can't get an inch closer to having windows. Please and thank you!
P.S. If I missed a discussion that answer my question just point me to it. Iv'e been looking for a while, but who knows i might have missed one.

The only known way to make it work on an external drive is by first installing Windows onto an internal drive, then cloning the install to an external Thunderbolt drive. Thunderbolt is seen as an extension of the internal bus, so Windows doesn't see it as an external device.

I have run disk utility- the drive is corrupted- I get the error message restart your computer holing down the Cmd

I have now tried every variant of key compbinations but I still get the grey lock icon with a box which won't accept my password.
When re-running disc utility all I get is the same error message

I ran the Disk Utility and got a message that it can't repair the disk. This happened after I did a restart Command and R. After trying the repair cycle I got a message "Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed - up files" I found myself stuck because I couldn't shut down the Disk Utility. Out of frustration and patience I turned the I-Mac off by pressing the start key, thinking it would restart my computer. I feel like a fool now! I started the computer up and all I got was a grey screen with a flashing file with a question mark inside the file icon which is blinking off and on. I tried attaching my Seagate hard drive with no luck. What can I do? Thank You!

Does turning off your MacBook by holding the power button hurt your MacBook

Almost whenever I exit out of War Craft 3: The Frozen Throne my Mac Book freezes up, as a result I frequently turn off my Mac Book by holding down the power button- Does this hurt my Mac Book?

There is most definitely a chance that you can cause stability problems (although, it is somewhat less likely that you would cause any harm to the hardware). The likelihood of you causing problems increases directly with how often you shut down this way. You should be seeking a solution to the issue you are having with WC3. As Johathan mentioned, OS X does quite a bit in it's shutdown process. Bypassing that can cause anything from basic data corruption, to stability issues, to a non-bootable system depending on what the machine is in the middle of doing when you force it to shut down. In general, worst case scenario is that you would need to re-install OS X to fix things up. It's really not worth taking a chance on your systems stability for the sake of a game. I would say that you really should try to track down a solution to the problem you are having with the game.

Disk Utility repair failure: You need to restart your computer. Hold down...

While trying to backup my macbook pro (running 10.5.8 leopard). I kept getting the gray window that forced me to shut down my computer. After some research, I conluded that I needed to check my HDD for damage. I ran the Verify Disk option (Repair Disk option was not yet "clickable"), and it says
First Aid Failed
stopped verifying HD because the following error occured:
Filesystem verify or repair failed.
In the text box below that, it says
"(It should be 771886 instead of 771889)
Invalid volume directory count
(It should be 148275 instead of 148272)
The volume Macintosh HD needes to be repaired.
ERROR: Filesystem verify or repair failed."
I then tried the Repair Disk Permissions option and it came up with three difference
Library/application support/proapps
System/Library/privateframeworks/browserkit.framework
System/Library/privateframeworks/prokit.framework
(I can give more information on these three if that would help at al)
In the Verify Disk error, it says that it needs to be repaired, but the repair disk option is still not clickable. I don't know what to do from here. Is there someone more tech savvy than I who can help?

You cannot do rewpairs from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair:
http://support.apple.com/kb/HT1782?viewlocale=en_US
Once that is complete reboot again from your usual start-up disk.
More useful reading here:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/TS1417?viewlocale=en_US
For a full description of how to resolve Disk, Permission and Cache Corruption, you should read this FAQ from the X Lab:
http://www.thexlab.com/faqs/repairprocess.html
Apple's advice on general maintenance:
http://support.apple.com/kb/HT1147?viewlocale=en_US

When I boot up my machine, the apple logo comes up and the little pinwheel comes up as if it is loading up. Then another screen comes up stating "you need to restart your computer. Hold down the power button for several seconds...." any thoughts?

I have already tried to start in safe mode. No go. I tried the single mode option as well. Volume ok. I don't have the os x disc. The computer was given to me because they could not fix the problem. Not computer smart. Does anyone have any ideas?

Apple may still supply the original restore CDs/DVDs for a nominal fee. Have your serial number and model information available when you call them. You do not have to be the original owner.
AppleCare Support Phone Number: 1-800-275-2273
open 6am to 6pm Pacific Time
Apple Phone Sales 1-800-692-7753
International Technical Support Numbers
http://www.apple.com/support/contact/phone_contacts.html
"You have to call Apple & likely ask for a Product Specialist to get it (Leopard), if they still have it... helps if you tell them you have a new iPhone (iPad) that needs it!"
BDAqua
Requirements for Mac OS X v10.5
http://support.apple.com/kb/HT3759

You need to restart your computer. Hold down the power button until it turns

Krijg af en toe bovenstaande vervelende mededeling

Dit staat bekend als een kernel panic. Het is gewoonlijk, maar niet altijd door de hardware met het geheugen vaak de hoofdoorzaak. Zie deze FAQ (in het Engels) voor meer informatie: http://thexlab.com/faqs/kernelpanics.htmll

My mac book pro 17" model 1229 does not work. It askes' me to :'you need to restart your computer.Hold down Power button for several seconds or press the Restart button

Mac book pro 17" model 1229 displaying: "you need to restart your computer. Hold down the power button for several seconds or press the Start button

Your MBP may have had a kernel panic. If so, post the kernel panic per these instructions:
http://support.apple.com/kb/ht2546
An Apple Hardware Test may be useful:
http://support.apple.com/kb/ht1509
Note that an error free AHT is not definitive.
Ciao.

Kernel Panic: You need to restart you computer. Hold down the Power button until it turns off, then press the Power button again.

I apologize for writing a book, but I think explaining the full story may possibly get me a correct answer. I hope that someone can give me some insight as to what is the problem with my MacBook Pro. I have a MacBook Pro (15-inch Early 2008), model identifier: MacBookPro4,1 running OSX Lion 10.7.5 with 6 GB memory. My wife first noticed a problem with the display. Every so often it would get fuzzy with jumping lines going across the screen making it vitually unviewable. The final time that incident took place the computer froze which required holding down the power button to restart the computer. The computer started up to the point of the Apple logo and the spinning gear for quite some time until the screen darkened from top to bottom displaying the following message in five different languages: "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again." I have read other blogs and support communities where people get the message intermittently, but my computer would not go past that point no matter what. Through research and the Apple Store I was told that this is a Kernel Panic. The so called "Apple Genius" at the local Apple Store was unable to get the computer to boot past that point even with his gadget. It would not startup in recovery mode, safe mode or off of a disc. I forget exacty what he told me, but he said it was getting past the first two startup steps, but it would not get past the third step which is to mount the desktop. He guessed that it may be a problem with the hard drive; a loose wire or something or other. I disconnected the hard drive completely and took it out. Everything appered to be connected properly. Then I installed it back correctly, but it did not solve the issue. So I guess I disproved his theory of a loose wire... I purchased ProSoft Data Rescue 3 and connected my MacBook Pro to another Apple computer using a firewire 400 cable. I was able to get everything I needed off of the hard drive. I did some more research and I decided to restart the MacBook Pro in verbose mode (holding down the command button and V button). The computer magically started up!!! I was upset that I wasted my money on the ProSoft Data Rescue 3. I managed to take additional items off of the computer and back it up on to an external hard drive. After some time the computer froze. I repeated the power button process to restart and received the same kernel panic. I managed to get the computer to startup approximately six or seven more times via verbose mode; each time the computer staying on for a shorter amount of time before it would freeze. I managed to run Disk Utitlity. I performed first aid to fix the hard drive and it said that the hard drive appeared to be fine. After first aid I erased the hard drive and booted off of a Lion disc to perform a clean install or an erase and install. Lion installed until the progress bar got the the end where I received a message that there was an error installing Lion, please try again. Each time I attempted to install the software I would receive the same message. Eventually the computer would not boot from the Lion disc. I went back to the Apple Store and the Apple Genius was able to get the computer to boot off of his gadget where Lion istalled completely. I set up the computer as a new computer. He said that he partitioned the hard drive as DOS and then back to Mac OS Extended (Journaled) which would get rid of any errors the drive may have had. He guessed that the problem was the hard drive, but was not exactly sure. When I brought it home I installed all of the software applications I had on it previously. Approximately three days later, which may have been the fifth of sixth time starting up the computer, the display became fuzzy again and the computer froze. The computer did restart once and I was able to retreive a "log" which I have pasted below. After if froze for the second time it restarted once using verbose mode and froze almost immediately. After holding down the power key to shut it down and then restart; I received the same kernel panic after the Apple logo and spinning gear which put me right back to square one. Now the computer will not boot via any method. It freezes at the end of verbose mode which forces you to hold down the power button to shut down. I also read that poorly seated ram may cause this issue, but I removed and installed the ram multiple times. I even purchased new ram from Other World Computing (Mac Sales) 6 GB, but that did not make a difference. I think I may see six possible problems on the verbose screen mode, five errors and one warning; I will type them out here:
1. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key $Num (kSMCKeyNotFound)
2. SMC: :smcReadKeyAction ERROR: $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0
3. SMC: :smcInitHelper ERROR: MMIO regMap ==NULL - fall back to old SMC mode
4. WARNING - ACPI_SMCCtrlLoop: :initCPUCtrlLoop - no sub-config match for MacBookPro4,1 with 8 p-states, using default stepper instead
5. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
6. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key BEMB (kSMCKeyNotFound)
I was hoping that someone could read my log to ascertain wether or not they see a problem that stands out. I was also hoping that someone could tell me if verbose mode provides any information that may be wrong with my computer. I just hope that someone can give me some insight as to what may be wrong with my computer. If it is the hard drive I will easily replace it, but I want to make sure that is the problem first before I waste money on a hard drive or anything else. Please let me know if anyone requires any other information from me.
Thank you!
Interval Since Last Panic Report: 21959 sec
Panics Since Last Report:          1
Anonymous UUID:                    B62D9AB4-53DD-4F76-90B2-32453302297E
Sat Aug 31 15:20:06 2013
panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d9d774, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x0000000011d06000, CR4: 0x0000000000000660
RAX: 0x0000000000000004, RBX: 0xffffff809eb71000, RCX: 0xffffff8000892604, RDX: 0xffffff80b69d3aa8
RSP: 0xffffff80b69d3bd0, RBP: 0xffffff80b69d3bd0, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000010751b4, R10: 0xfffffffffffffff4, R11: 0xffffff8000640fd4
R12: 0xffffff809eb71000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0x0000000000000010
RFL: 0x0000000000010202, RIP: 0xffffff7f81d9d774, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000000000000010, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80b69d3880 : 0xffffff8000220792
0xffffff80b69d3900 : 0xffffff80002c4794
0xffffff80b69d3ab0 : 0xffffff80002da55d
0xffffff80b69d3ad0 : 0xffffff7f81d9d774
0xffffff80b69d3bd0 : 0xffffff7f81d8913a
0xffffff80b69d3c20 : 0xffffff7f81d89928
0xffffff80b69d3c40 : 0xffffff7f81d5be8f
0xffffff80b69d3c70 : 0xffffff7f8087f832
0xffffff80b69d3cb0 : 0xffffff7f8087f93d
0xffffff80b69d3cd0 : 0xffffff7f8088b625
0xffffff80b69d3d40 : 0xffffff7f80889c76
0xffffff80b69d3d80 : 0xffffff80006245ca
0xffffff80b69d3dd0 : 0xffffff8000657d4e
0xffffff80b69d3e30 : 0xffffff80002a3851
0xffffff80b69d3e80 : 0xffffff8000223096
0xffffff80b69d3eb0 : 0xffffff80002148a9
0xffffff80b69d3f10 : 0xffffff800021bbd8
0xffffff80b69d3f70 : 0xffffff80002aef10
0xffffff80b69d3fb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000->0xffffff7f808acfff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
         com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d590 00->0xffffff7f81e1bfff
            dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 bf000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f808ad000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro4,1 (Mac-F42C89C8)
System uptime in nanoseconds: 62230646656
last loaded kext at 53384504695: com.apple.filesystems.autofs 3.0 (addr 0xffffff7f81efc000, size 45056)
loaded kexts:
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleHDAHardwareConfigDriver 2.2.5a5
com.apple.driver.AppleHDA 2.2.5a5
com.apple.GeForce 7.3.2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AppleMuxControl 3.1.33
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyEventDriver 227.6
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.iokit.AppleYukon2 3.2.2b1
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AirPortBrcm43224 501.36.15
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleUSBUHCI 5.1.0
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.nvidia.nv50hal 7.3.2
com.apple.nvidia.nvGK100hal 7.3.2
com.apple.nvidia.nvGF100hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOATAFamily 2.5.1
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro4,1, BootROM MBP41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 6 GB, SMC 1.27f3
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7F9B0000, 0x4354353132363441433636372E4D31364643
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7FBAFFFFFFFFFF, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.15)
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS543225L9SA02, 250.06 GB
Parallel ATA Device: MATSHITADVD-R   UJ-867
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0230, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2

I had already written a book and I did not want to bombard people with more information, but in my previous research I did come across the major issues with the NVIDIA card. I also was well aware that Apple offered a replacement program that ended in December of 2012. I was going to add that in my original post, but I discounted that theory because I put my faith in the so called "Apple Genius" when I made my second trip to the Apple Store. I brought the NVIDIA card issue to his attention and asked him if he thought that may be the problem, but he said no. He said if it was the NVIDIA card that the screen would be completely black and there would be no startup chime. When I experienced the screen issues I thought it was a problem with the NVIDIA card or the logic board. I asked myself, how can a flawed hard drive cause the screen to act funny.
nbar and Rick Warren, I thank you both for your help and insight; people like you are the real "Apple Geniuses." I was hoping there was a way I could wipe the hard drive before I dumped the computer or attempted to sell it. I guess I will look into purchasing a new machine when I have the funds. Again...thank you both!

"please restart your computer from the power button" message

Hi,
I woke up yesterday and the computer´s fans where running like crazy. Everything was frozen so I pushed the power button in for a few seconds and restarted the computer. When it came up I used it for like half an hour and it froze again. I did the same thing because the keyboard was´t working eather.
It did that a couple of more times during the day. So I started shutting it down when I wasn´t using it.
Last night, the last time it happened, I was checking my email and this message came on full screen in 4 languages.
*"Please restart you computer by pressing the power button for a few seconds"*
Or something very similar to this.
I did it and I haven´t turn it on since then.
In the middle of all this I checked the disk and it said is was fine, the permissions as well. I don´t know if it means something thought.
I don´t know if it´s a hardware or software issue, any ideas?
Thanks!!!!

Hi japamac,
This morning the computer froze again... no messages but I had to restart it.
So, I did the things you pointed:
+-Boot to the OS X Install disc, in the second window after the language selection, from the Menu bar, select Utilities/Disk utility, and use that to "Repair Disk" on your hard drive.+
I did this and the disk was fine... it said something like +nothing to repair+
+-In the original software discs is one with the Apple Hardware test.+
+Boot to that disc and run the extended hardware test to verify system performance.+
Did the extensive test and as soon as the dialog box came up, under test results next to MEMORY, it said: error detected at startup. Then It went throughout the devises and everything passed (including the MEMORY) but there was an error code *post/0/2048 DIMMO/J11*
So, I tried to download Rember but it`s for 10.5 and higher... I´m still using 10.4... is there a similar software for my OS?
Thanks for your help!
Message was edited by: vickatter

Restart your computer by holding the power......

Similar Messages

Maybe you are looking for