Restarted my MacBook Air, just have a white screen with apple . Will not start up

Restarted my MacBook Air, just have a white screen with apple . Will not start

What version MacBook Air do you have? Usually identified by the year you bought it, i.e. mid-year 2012, 2011, etc. Also, what OSX are you running? (please provide OSX ver number, i.e. 10.8.2 for latest Mountain Lion, etc.)
Not sure I can help you directly but for others to lend a hand, they'll need to know this information to make a sound suggestion. I see you're new to posting here so this will help you in the future.
Good luck.

Similar Messages

I have a white screen with Apple in the middle, the little spinner thing, and the loading bar. When it is done loading, the mini mac shuts down. Please help me.

I have a white screen with Apple emblem in the middle. The little spinner is spinning and there is a bar showing it loading. When it is done loading, the mini mac goes off. Please help me.

If your data is backed up, we can guide you through repairing the directory with my subscription FAQ*:
http://www.macmaps.com/directoryfaq.html
* Links to my pages may give me compensation.

I bought iphone 5s 2 days ago and suddenly it turn off and start again till the white screen with apple logo and start again

i bought iphone 5s 2 days ago and suddenly it turn off and start again till the white screen with apple logo and start again
please answer me as soon as possible

Hello Ahmedabokamar,
Thanks for the question! I'd recommend taking a look at the following article for troubleshooting steps that can help get your iPhone working again.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen

White screen with Apple logo/ not booting

I recently tried to install the software for the "Flip" video camcorder and upon restarting my computer after installation, my computer is stuck on the white screen with Apple Logo, 'thinking" wheel spinning, and fans going full blast. I tried forcing a stop with turning computer off by holding power button in the back until system powered off. When I started the computer back up, it did the same thing.
What is the likely problem and how do I fix this. I bought the computer used and do not have the OS X software that comes with the computer originally.

You really need those discs. You can either buy a BLACK retail version of Leopard and use that or you can call Apple at 800-767-2775 and for a nominal fee they will send you the proper discs for your model. You will need the serial number, which you can find on the bottom of the foot of your computer. Do not buy any grey discs, they are machine specific and will not work on yours. In the meantime, try starting by resetting the PRAM and the SMU
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Press and hold the power button for 5 seconds.
4. Release the power button.
5. Attach the computers power cable.
6. Press the power button to turn on the computer.
You need to make sure also, that the software that comes with your Flip is compatible with the OS version you are running.
Let us know how you make out,

My Macbook Air just shows the lit screen with nothing on it. The mouse does not respond. Nor does the screen change. How can I reset to get the Air working again. 2012 model with the latest software updates.

My Macbook Air is totally unresposive once it is turned on. It has 256 GB of flash memory. No mouse cursor; the keyboard has no effect. Running the battery down and then plugging in does not fix this. What can I do to get the Air back?

Have you tried to recover your Mac?
Boot and hold Cmd-R until the recovery screen appears. Follow the prompts. This will reinstall everything over the internet - you do not need any installation media.
You do have a backup of your data, right?

Mac book pro is unable to display desktop ,only white screen with apple logo is appearing

Hi
I have a Mac book pro, since today morning the Mac book pro is not starting. It just displays the white screen with Apple logo and search signal. Despite waiting for a long time desktop is not coming up.
I have tried to restart it several time but the status remains same. Kindly help.
Thank you
Kind regards
satish

Gray, Blue or White screen at boot, w/spinner/progress bar

Won't turn on white screen with apple logo and spinning disc

Mac book air won't boot up just has a white screen with apple logo and spinning disc have tried all the startup multiple key pushes , I think

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Hey guys. my macbook air wont get past the screen with the apple on it during start up. how do i fix this? i have a paper saved on my laptop on need to get at it. thanks guy!

hey guys. my macbook air wont get past the screen with the apple on it during start up. how do i fix this? i have a paper saved on my laptop on need to get at it. thanks guy!

Your boot drive is damaged in some way. If you have an original installation disc, you can boot from that and run Disk Utility. From DU you can select your internal hard drive ("Macintosh HD" is the name Apple puts on it - you may have renamed yours) and select "Verify Disk". If errors come up, try "Repair Disk". If it repairs, then you should be able to restart and boot from it. If it doesn't show up or won't repair, your drive is probably hosed.
Clinton

Hi, I have an iMac which I just booted up and have a white screen with a blue folder with a question mark blinking on and off. Any help would be appreciated. Tommy

Hi, I have an iMac which I just booted up and have a white screen with a blue folder with a question mark blinking on and off. Any help would be appreciated. Tommy

That means your iMac could not find a system to use for startup. That may mean the internal hard drive has become faulty, or the hard drive mechanism is fine, but the startup volume ("Macintosh HD" unless you renamed it) may have some type of data corruption that makes it unbootable.
First, you should try resetting PRAM
http://support.apple.com/kb/HT1379
and if that does not help, use this procedure to reset SMC (power management). If your iMac is from 2008, this is the procedure for Intel (not PowerPC) Macs.
http://support.apple.com/kb/HT3964
(This forum category is for "iMac (PPC)," so if this iMac is older (with a PowerPC processor), please post back.)
Disconnect all peripheral devices. When you connect it back to power, if you have been using a power strip of some type, try connecting it directly to a wall outlet, by itself (at least initially). Start up with nothing but the power cord connected, then add only standard mouse and keyboard. If it works, run it that way for a while.
If PRAM and SMC reset have no effect, you should insert your Mac OS X installation disc (for the currently installed system) in the optical drive, and restart with the C key held down. This should get you to the Installer screen, where you can run Disk Utility from the Utilities menu.
In Disk Utility, does the internal hard drive appear in the sidebar? If so, select Macintosh HD in the sidebar and go to the First Aid tab. Use Repair Disk. If an error is found, note if Disk Utility was able to fix it or not.
You can then quit Disk Utility and attempt to restart normally.

My Macbook Air 2011 got a white screen and a folder with a question mark. I tried to press option+r and try to install the OS X Lion but it didn't show the disk Macintosh Hd

My Macbook Air 2011 got a white screen and a folder with a question mark. I tried to press option+r and try to install the OS X Lion but it didn't show the disk Macintosh Hd

You are using Snow Leopard so you have no OPTION+R shortcut. You need to boot the computer from your Snow Leopard DVD or USB flash drive.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

How can i change the apple ID in my 2nd hand macbook air, i have no more contact with the first owner. thanks

how can i change the apple ID in my 2nd hand macbook air, i have no more contact with the first owner. thanks
i already have an apple ID, but it seems that the original ID is locked to the first owner.

Perform the steps the first owner should have done for you as listed here:
http://support.apple.com/kb/HT5189

TS1587 trying to install Snow Leapord. System restarted 1/2 way through install. now i have a white screen with an apple on it. what do i do?

trying to install Snow Leapord. System restarted 1/2 way through install. now i have a white screen with an apple on it. what do i do?

Boot from the installer disk and start again, you did backup before you started this, right?

I tried to start my computer and just have a white screen. Does anyone know what this might be?

I tried to start my computer and just have a white screen. Does anyone know what this might be?

Not good news. But you will need to be more descriptive. What version of OS X are you running? Did you do anything different prior to turning it off the time before this happened? Is their an Apple logo on the screen? Is there a spinning gear below the logo? What version of OS X was installed when the computer was new?

My MBP wouldn't start this morning, it was just stuck on white screen with grey logo and fan running. I replaced my magsafe power cord and resolved starting issue. Now I can't connect to internet and iTunes won't load??? Help?

This morning I was just getting the white screen with logo and status bar with fan running. I thought it was an issue with the power adapter so I went out and replaced it. MBP will start now, but won't connect to internet. I have full wi-fi signal. Also, when I try to launch iTunes, it just quits right away. Please help?
-A

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I inadvertantly dropped my iphone 3 and now have a white screen with green vertical lines to the right. It won't sync with itunes due to an error. What can I do?

I inadvertantly dropped my iphone 3 and now have a white screen with green vertical lines to the right of the screen. It won't sync with itunes due to an error. What can I do?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If it does not resolve the issue, the device is permanently damaged and will require replacement.

Restarted my MacBook Air, just have a white screen with apple . Will not start up

Similar Messages

Maybe you are looking for