Restarted my Macbook White screen?

I was browsing the internet and realized I was on the wrong wifi.  Upon attempt to switch, I got the spinny beach ball of death.  After several minutes, i had to power down in an attempt to unfreeze it.  When I turned my computer back on, all I got was a white screen, no apple.  I have tried restarting, restarting pressing option, restarting pressing shift, all to no avail.
It is very important to me to get to a place where I can at least transfer files to an external HD, as I have unbacked-up wedding invitation designs that I have spent hours on (through many headaches).

What version MacBook Air do you have?  Usually identified by the year you bought it, i.e. mid-year 2012, 2011, etc.  Also, what OSX are you running?  (please provide OSX ver number, i.e. 10.8.2 for latest Mountain Lion, etc.)
Not sure I can help you directly but for others to lend a hand, they'll need to know this information to make a sound suggestion.  I see you're new to posting here so this will help you in the future.
Good luck.

Similar Messages

  • I was just using macbook normally when it  got hanged. Nothing worked so i restarted. A white screen then came up with a 'question mark in a folder' sign blinking. Nothing's working. Please help!!

    I was just using macbook normally when it  got hanged. Nothing worked so i restarted. A white screen then came up with a 'question mark in a folder' sign blinking repeatedly. Nothing's working. Please help!!

    Look for a solution here:
    https://discussions.apple.com/docs/DOC-5281
    Ciao.

  • MacBook white screen with apple at start up need help fast

    My MacBook is frozen at start screen it shows white screen with apple and won't go any further need help fast

    What version of Mac OS X are you using? Try restarting your computer safe mode (hold the shift key down while restaring) then run disk utility on you hard drive.  http://support.apple.com/kb/HT1782?viewlocale=en_US&locale=en_US

  • Lightening Strike - restart stuck on white screen (with logo)

    Power just went out and now our iMac ('11) wont restart.  When I power on, the start up sound plays and then a white screen with the apple and an spinning circle underneath.  After 10 mins, I shut it down and tried again.  Any ideas?

    ChipandTaz wrote:
    dumb question but what I looking for?  I did it and then got a screen of stuff and then a prompt.  When I typed "exit" to boot system, it locked up.
    I think it was hanging anyhow wasn't it.  The idea behind the verbose was to see what was going on in the boot proccess just prior to it hanging.  What was it doing?  I assume not a fsck since that would be a disk check (like Disk Utility repair) and that migh take longer.

  • MacBook white screen on power up

    Was in apple store getting battery diagnosed. On return home the MacBook pro will not start - it gets stuck in white screen.

    Take it back.

  • MacBook white screen at start up

    MacBook pro13" stuck at boot up white screen and boot up cd is stuck inside and can't eject

    Use these instructions to try to start up your MBP:
    http://support.apple.com/kb/TS2570
    Try these steps to eject your CD:
    Credit Kappy,
    Ciao.

  • Older Version MacBook White Screen During Use

    My MacBook (early 2009) keeps getting a white screen during use for anywhere from 15-90 seconds. Is this normal? What can I do to fix it? Or is the computer just too old and I should get a new one?

    I have 24 inch iMac and I get either an almost black screen/white screen or sometimes a green and white vertical pinstriped screen. This happens suddenly with no warning & I have to hold the start button in to shut down. It then starts up fine with apparently no harm done. It is very annoying but I need to know why my Apple is doing this. Computer is around 2-3 years old and now running 10.6.8. I had to buy this as when I inherited the machine know one knew where the OS software was.
    Does anyone rate Genius bar - can they determine what the prob is? I took a G5 tower in as it wouldn't start but they were unable to help - local PC shop sorted it charging me £100 - realised later it needed a new battery (£7) so you can't rely on anyone out there I'm afraid!
    I will need a new iMac 27 inch anytime soon but am loath to give anyone currently selling machines the money!

  • HELP.  After restart, only a white screen remains

    After downloading Mavericks last night, I tried installing it this morning on my iMac.
    After the loading bar suggested 1 minute remaining, when it got to 1 second, this lasted for about 30 seconds before the bar disappeared and text stating 28 seconds remaining showed.  This counted down to 1 second, the system restarted, and then a white screen appeared.
    And that's where it has stayed for several hours (leaving it just in case........).
    The only other thing happening is that I can consistently hear what I think sounds like a relay clicking every 5 to 20 seconds.
    I have switched the iMac off and on and also tried the Command & R whilst switching back on - but it just comes up with a pure white screen again.
    I also have a MBA which loaded Mavericks fine which is where I'm typing this from.
    Any suggestions please?  Or is it a trip to the Apple Store???
    Cheers

    We have the same problem since 15 days, any machines. We think that :
    http://support.apple.com/kb/ht5371
    Last RAW 5.0.1 update is buggy, but still investigating.
    Our previous disk image (10.8.5) from October the 8 works perfectly, then after update we randomly have this issue.
    So I agree with you, there is some trouble and the classical response :
    http://support.apple.com/kb/TS2570
    is not an option.
    Please Apple, do you work correctly as you have done it in a recent past.

  • My Mac keeps locking up and when I restart, I get white screen with just a folder with a question mark in it???

    If my computer displays a white screen with a folder with a question mark in it...what does this mean?

    Hi Pattib123,
    The flashing question mark says it can't find a valid system to boot from. Check out this article.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    Thank you for visiting Apple Support Communities.
    Nubz

  • MBPr Late2013 - Wont restart, freezes on white screen after invoking Restart

    My Macbook Pro Retina (Late 2013) often fails to restart  (though not always).
    It locks up after the screen goes white just before the shutdown/restart process and holds there untill force powered off and then powered back on.
    Is there any log somewhere in console that might help point to the issue?
    Note, This seems to have started around the 10.9.3 update though I am not sure.

    You can run the combo updater to refresh your files, but you might need to give everything time to shut down.
    OS X Mavericks 10.9.3 (Update (Combo)
    http://support.apple.com/kb/DL1746
    See the fix suggested here if the combo doesn't help:
    Slow and Stalled Restarts and Shutdowns
    http://www.wired.com/2013/10/mavericks-issues-and-fixes#slideid-234671
    MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
    Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
    Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.8.4 install from a regular update, just run the 10.8.4 Combo Updater on that system.
    "Delta" updaters can only take you from one version to the next. For example: 10.9.1 to 10.9.2. If somehow the 10.9.2 is missing something it should have, and that something isn't changed between 10.9.1 and 10.9.2 it will still be stale after the delta update.

  • Macbook White Screen (and nothing else happens after that)

    Hi All,
    I have a problem with my wife's macbook (which is exactly 13 months old, Aargh!)
    She was having some problem with slow apps etc, so decided to restart, the restart didnt go through so she tried holding down the power button to force shut down.
    When she tried to restart it several seconds later, it chimes but it gets stuck on a white/grey screen with nothing on it, not even the Apple logo. Something started whirring louder and louder for the first 2 minutes and it stayed that way for at least 10 minutes++. Note that it shuts off immediately as soon as I push the power button down.
    I have tried all the startup key combinations listed on http://support.apple.com/kb/HT1533?viewlocale=en_US
    But other than the Firewire logo showing up when I pressed T down at startup nothing else works, the actual Firewire target disk function didnt work when hooked up to another mac.
    I have also tried taking off the battery/AC adapter and holding down the power button method to no avail.
    The Macbook itself was bought in the US, but we are now in Europe so the startup CDs are not around, or at least not yet . I doubt it will do miracles anyway...
    I know I'd probably have to take it in to an Apple Store to see whats up, but I thought I'd share it here first.
    Let me know if anyone have similar experiences..
    Cheers.

    Try resetting the PRAM by restarting your computer while simultaneously holding down the Command-Option-P-R keys until the computer restarts a second time.
    Hope this helps

  • Spilt beer on macbook/white screen

    Hello,
    I am in need of some help/advice. An unknown(although not too much) amount of beer got spilt onto my macbook this evening. The screen is now completley a gray/white color and that is all it does. I have as of now turned off the computer completley, removed the battery and letting it dry with a fan blowing on it from not too far away. If anyone has any suggestions or can help in this matter please feel free to post. Thank you

    Welcome to the discussions!
    First of all, get one of these
    No spillage - unless you pass out - LOL!
    Seriously, let the MB dry completely before attempting to power it on. Many times it is not the liquid itself that does than damage, but the electrical shorts when someone tries to power up a device that has liquid still in it.
    After it has been thoroughly dried - and I suggest at least 24 hours - then you can try to power it up and see if it works. If not, then a trip to the local Apple service center is called for. It will likely be expensive and after they give you an estimate, you can decide if the repair is worth it to you or if purchasing a new unit is a better solution.
    It may also be covered under homeowners insurance. You may want to check with your agent before doing anything with the repairs.
    Good luck.

  • HT4044 Early MacBook white screen?

    Upon opening my MacBook, saw a screen with scrolling multi color lines, all the while trying to open my home page. Soon went white, and has stayed there. Any suggestions?

    Use these instructions to try to start up your MBP:
    http://support.apple.com/kb/TS2570
    Try these steps to eject your CD:
    Credit Kappy,
    Ciao.

  • MacBook White Screen

    Ok I turned on my computer today and the screen on my MacBook is white. I hear it start up but the screen never changes it just stays white. I hooked up my MacBook to my 20 inch Cinema Display the Cinema Display works but the MacBook stays white. In the Display options I do NOT have it set to mirror so if I move my mouse over to the MacBook screen it disappears then will reappear when i bring it back to the cinema display. The OS is running fine as far as I can tell, I just cant see it on my MacBook screen. Any help?

    Wind, what did you do/say when you went down to the store? I was told they had never seen anything like it and they just wanted me to send it in to Apple...I got a call back form the store manager two days later saying he was sorry for the bad time I had (it was my 2nd time down there, and it's a 2-hour drive one way) and he would give me a discount...and he did no such thing, in fact, he quoted me a price higher than what the "Genius" quoted me. Here are pics, before the "pinching", and after:
    http://img291.imageshack.us/img291/4721/photosx2.jpg
    http://img505.imageshack.us/img505/8572/photo2qw5.jpg
    Message was edited by: Bthumme
    Message was edited by: Bthumme

  • My MacBook White Screen Goes Black

    I bought the computer two years ago. It worked perfectly well until three weeks ago. First, the trackpad doesn't work properly. Fine, I use a mouse instead. But I can't stand the screen's problem. It doesn't wake up from sleeping. Fine, I don't let it sleep. However, if I shut it down, and turn it on, the screen goes black too! I keep opening and closing the screen to wake it up for at least 10 mins. That's ridiculous. What can I do? I saw someone write that the apple store will fix it for this problem even though the computer's warranty is expired. Is that true?

    Try Resetting the System Management Controller (SMC)

Maybe you are looking for

  • Can anyone access the 3 Disney Channels on Apple TV?

    All were working fine not 2 days ago, now none work on any of my 3 Apple TV's. Just get an "Accessing Disney (Junior, XD, Channel)" and a pinwheel of death that goes no where. I updated the software on a couple days ago when prompted. Perhaps that is

  • IMac 2011 + Intel 510 SSD Performance

    Yesterday I installed Intel`s SSD 510 (120GB) in my iMac 2011 27 inch (along with a 2TB WD Caviar black) Today I did some testing and the results are somehow disappointing. It would be great if other owners of Intel`s 510 can post some benchmark resu

  • Conversion of SQL resultset into DBF III file (dbase file)

    Dear All, Is there a way to convert the SQL Rseultset into dbase file(dbf III) using PLSQL or forms??? My database is Oracle10g.. Appliactio Server version is 10.1.2.0.2 and platform is Windows.. Thanks in advance for your help... Dev

  • Flash preloader starts from 60%???

    Hi Friends, My website http://www.goincubix.com starts from 60%. I'm sure it waits for the audio to load because the audio is some 400KB. The overall flash swf is 810KB. I tried many solutions mentioned online. I tried loading the sound externally/in

  • SQL for Reverse Traversing of any account to find out its parent

    Hi, I have a table called "charts" following is the structure. 1. ACC_CODE VARCHAR2(6). 2. ACCNAME VARCHAR2(60). 3. BALANCE NUMBER(8,2) 4. PARENT_AC VARCHAR2(6) sample data is like this: 100000 Assets ............110000 Current Assets ...............