Restarting a failed admin server on another machine with different IP
Hi,
I'm trying to restart a failed admin server on another machine with different IP on Weblogic Server 10gR3. After copying the domain config to another server, the admin server can be started without any problem, but it cannot contact the managed server until the managed server is rebooted.
The behavior contradicts the documentation, http://download.oracle.com/docs/cd/E12840_01/wls/docs103/server_start/failures.html#wp1064112, that says Running MSs will learn the new AS address when they are contacted by the AS after it has been started. It does not mention the managed servers need to be rebooted.
did I do anything wrong? Your help would be much appreciated.
Thanks a lot,
Andreas
Hi,
What ever you said is true. If the IP Address of Admin Server is changed, then Managed Server must connect to Admin Server after "ReconnectIntervalSecs" . If the IP address is not moved then Admin Server Should contact Managed Server automatically.
Can you provide details steps you had performed, so that we can identify the root cause of the issue.
Thanks.
Vijay Bheemineni.
Similar Messages
-
Possible to clone BO XI server to another machine with different ip
Hi,
Is it possible to clone BO XI (Windows) to another wintel server (different config), with different hostname and IP address ?
Assuming, we will use the same database repository (only the destination machine has different hostname and IP).It will use names of the servers it created during installation. What version of BOE are we talking about here ?
If it's R1/R2 - in CMC after repointing, you will see new servers and old ones, you delete old ones and you're good to go.
With Xi3.1 it's a little more complicated (see many threads on this forum) but same in principal. On new install you create new SIA pointed to the original CMS DB etc...
Import Wizard aproach is actualy even more safe, but little slower. -
How to start the admin server on another WLS machine?
Hi,
I have a weblogic cluster with 2 weblogic machines: machineA and machineB.
The cluster contains 4 managed servers (2 on each WLS machine)
The admin server runs on machineA (standalone).
I have a file backup of the domain directory on machineA.
Suppose machineA crashes.
How can I start the admin server on machineB?
Kind regards,
PieterThanks for your reply,
I know how to (re)start the admin server on machineA. But in this case I want to start the admin server on machineB.
The documentation says:
Restarting an Administration Server on Another Machine
If a machine crash prevents you from restarting the Administration Server on the same machine, you can recover management of the running Managed Servers as follows:
Install the WebLogic Server software on the new administration machine (if this has not already been done).
Make your application files available to the new Administration Server by copying them from backups or by using a shared disk. Your application files should be available in the same relative location on the new file system as on the file system of the original Administration Server.
Make your configuration and security data available to the new administration machine by copying them from backups or by using a shared disk. For more information, refer to Directory and File Backups for Failure Recovery.
Restart the Administration Server on the new machine.
Simply starting the admin server on the other machine does not work because it tries to start the admin server on the ip address of the old machine.
Edited by [email protected] at 05/10/2007 7:47 AM -
Trouble starting managed weblogic server on another machine in acluster
Hi,
I was having trouble starting managed weblogic server on another machine in a cluster from the command prompt
I have following setup:
1) BEA weblogic is installed on 2 machines - local machine A with ip address 172.17.2.219 and another machine B with ip address 172.17.2.201
2)node manager is running on both machines
3)An admin server myserver on the local machine at port 7001
4)In the admin tree under Machines a new machine is created 'Machine1' with Node manager Listen Address: 172.17.2.201
5) The managed server 'BEAServerMan1 ' instance is created with listen Address 172.17.2.201 and port 7705. This Server is assigened to Machine1. The server also belongs to a cluster 'Cluster1' where the 172.17.2.201:7705 is part of the Cluster Address.
I can start 'BEAServerMan1 from http://172.17.2.16:7001/console/
But I am unable to start BEAServerMan1 from the console using the command :
startManagedWebLogic BEAServerMan1 http://172.17.2.219:7001
startManagedWebLogic.sh BEAServerMan1 http://172.17.2.219:7001
CLASSPATH=/opt/BEA/j2sdk1.4.1_03/lib/tools.jar:/opt/BEA/weblogic81/server/lib/weblogic_sp.jar:/opt/BEA/weblogic81/server/lib/weblogic.jar:/opt/BEA/weblogic81/server/lib/ojdbc14.jar::/opt/BEA/weblogic81/common/eval/pointbase/lib/pbserver44.jar:/opt/BEA/weblogic81/common/eval/pointbase/lib/pbclient44.jar:/opt/BEA/j2sdk1.4.1_03/jre/lib/rt.jar:/opt/BEA/weblogic81/server/lib/webservices.jar:/opt/BEA/j2sdk1.4.1_03/bin:/opt/BEA/j2sdk1.4.1_03:/opt/BEA/j2re1.4.1_03/bin:/opt/BEA/j2re1.4.1_03:/opt/BEA/j2sdk1.4.1_03/lib/tools.jar:/opt/oracle/OraHome1/jdbc/lib/classes111.jar:/opt/oracle/OraHome1/jdbc/lib/nls_charset11.jarx:/opt/BEA/user_projects/domains/mydomain/myserver/stage/_appsdir_dyn_ear/dyn.war:/opt/BEA/user_projects/domains/mydomain/./myserver/.wlnotdelete/extract/myserver__appsdir_dyn_ear_dyn/jarfiles/WEB-INF/lib/dspjspTaglib1_036773.jar:/usr/bin/j2re1_3_1_11/bin:/usr/bin/j2sdk1_3_1_11/bin:/usr/bin/j2sdk1_3_1_11:/usr/bin/j2sdk1_3_1_11/lib/tools.jar
PATH=/opt/BEA/weblogic81/server/bin:/opt/BEA/j2sdk1.4.1_03/jre/bin:/opt/BEA/j2sdk1.4.1_03/bin:/opt/BEA/j2sdk1.4.1_03/bin:/opt/BEA/j2sdk1.4.1_03:/opt/BEA/j2re1.4.1_03/bin:/opt/BEA/j2re1.4.1_03:/opt/BEA/ATG6.2.0/home/bin:/usr/xpg4/bin:/opt/bmc/Patrol3/Solaris28-sun4/bin:/usr/bin::/usr/openwin/bin:/bin:/usr/ucb:/usr/local/sbin:/usr/dt/bin:/opt/RICHPse/bin:/usr/bin/j2re1_3_1_11/bin:/usr/bin/j2sdk1_3_1_11/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://<hostname>:<port>/console *
<13-Jan-2005 3:22:20 o'clock PM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 1.4.1_03-b02 from Sun Microsystems Inc.>
<13-Jan-2005 3:22:21 o'clock PM EST> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at http://172.17.2.219:7001 to check if there exists a running admin server at this URL.>
<13-Jan-2005 3:22:22 o'clock PM EST> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
<13-Jan-2005 3:22:22 o'clock PM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP1 Fri Jun 20 23:06:40 PDT 2003 271009
WebLogic XMLX Module 8.1 SP1 Fri Jun 20 23:06:40 PDT 2003 271009>
<13-Jan-2005 3:22:22 o'clock PM EST> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server http://172.17.2.219:7001 to retrieve the initial configuration.>
<13-Jan-2005 3:22:27 o'clock PM EST> <Notice> <Log Management> <BEA-170019> <The server log file /opt/BEA/user_projects/domains/mydomain/BEAServerMan1 /BEAServerMan1 .log is opened. All server side log events will be written to this file.>
<13-Jan-2005 3:22:37 o'clock PM EST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<13-Jan-2005 3:22:38 o'clock PM EST> <Notice> <WebLogicServer> <BEA-000328> <Starting WebLogic Managed Server "BEAServerMan1 " for domain "mydomain">
<13-Jan-2005 3:22:50 o'clock PM EST> <Notice> <Cluster> <BEA-000138> <Listening for announcements from cluster Cluster1 on 237.0.0.1:7001.>
<13-Jan-2005 3:22:50 o'clock PM EST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of Cluster1.>
<13-Jan-2005 3:23:24 o'clock PM EST> <Emergency> <WebLogicServer> <BEA-000350> <Unable to create a server socket on Channel Default for: 172.17.2.201, port: 7705. java.net.BindException: Cannot assign requested address Perhaps the address 172.17.2.201 is incorrect or another process is using port 7705.>
<13-Jan-2005 3:23:24 o'clock PM EST> <Emergency> <Security> <BEA-090085> <Server failed to bind to the configured port. The port may already be used by another process.>
<13-Jan-2005 3:23:24 o'clock PM EST> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: Server failed to bind to the requested port. See preceeding log message for details.>
The WebLogic Server did not start up properly.
Exception raised: 'weblogic.server.ServerLifecycleException: Server failed to bind to the requested port. See preceeding log message for details.'
Reason: Server failed to bind to the requested port. See preceeding log message for details.
***************************************************************************Hi
i am also facing the same problem.kindly reply for th solution if you got.
D:\bea1\user_projects_cluster\mydomain>startManagedWebLogic server2 10.16.96.21:
7001
D:\bea1\user_projects_cluster\mydomain>echo off
CLASSPATH=d:\bea1\jdk131_03\lib\tools.jar;d:\bea1\weblogic700\server\lib\weblogi
c_sp.jar;d:\bea1\weblogic700\server\lib\weblogic.jar;F:\bea\weblogic81\server\li
b;D:\;c:\
PATH=.;d:\bea1\weblogic700\server\bin;d:\bea1\jdk131_03\bin;E:\oracle\product\10
.2.0\client_1\bin;C:\Program Files\Common Files\NetSarang;C:\WINDOWS\system32;C:
\WINDOWS;C:\WINDOWS\System32\Wbem;F:\bea\jdk142_05\bin;C:\PROGRA~1\IBM\CLIENT~1;
C:\PROGRA~1\IBM\CLIENT~1\Shared;C:\PROGRA~1\IBM\CLIENT~1\Emulator;
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://[hostname]:[port]/console *
D:\bea1\user_projects_cluster\mydomain>"d:\bea1\jdk131_03\bin\java" -hotspot -Xm
s32m -Xmx200m -Dweblogic.security.SSL.trustedCAKeyStore=d:\bea1\weblogic700\serv
er\lib\cacerts -Dweblogic.Name="server2" -Dbea.home="d:\bea1" -Dweblogic.managem
ent.username= -Dweblogic.management.password= -Dweblogic.management.server="10.1
6.96.21:7001" -Dweblogic.ProductionModeEnabled= -Djava.security.policy="d:\bea1\
weblogic700\server\lib\weblogic.policy" weblogic.Server
<Sep 20, 2007 1:47:13 PM IST> <Info> <Security> <090065> <Getting boot identity
from user.>
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
Starting WebLogic Server...
Connecting to http://10.16.96.21:7001...
<Sep 20, 2007 1:47:25 PM IST> <Notice> <Security> <090082> <Security initializin
g using realm myrealm.>
<Sep 20, 2007 1:47:25 PM IST> <Notice> <WebLogicServer> <000328> <Starting WebLo
gic Managed Server "server2" for domain "mydomain">
Starting Cluster Service...
<Sep 20, 2007 1:47:46 PM IST> <Notice> <Cluster> <000138> <Listening for announc
ements from cluster mycluster on 237.0.0.1:7777>
<Sep 20, 2007 1:47:46 PM IST> <Notice> <Cluster> <000133> <Waiting to synchroniz
e with other running members of mycluster>
<Sep 20, 2007 1:48:16 PM IST> <Notice> <Cluster> <000134> <Discovered and synchr
onized with 1 other running members of mycluster>
<Sep 20, 2007 1:48:17 PM IST> <Emergency> <WebLogicServer> <000350> <Unable to c
reate a server socket on Channel Default for: 10.16.96.24/10.16.96.24, port: 900
1. java.net.BindException: Cannot assign requested address: JVM_Bind Perhaps the
address 10.16.96.24/10.16.96.24 is incorrect or another process is using port 9
001.>
<Sep 20, 2007 1:48:18 PM IST> <Emergency> <Security> <090085> <Server failed to
bind to any port such that it is not reachable from the console.>
<Sep 20, 2007 1:48:18 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to i
nitialize the server: Fatal initialization exception>
The WebLogic Server did not start up properly.
Reason: Fatal initialization exception
D:\bea1\user_projects_cluster\mydomain>goto finish
D:\bea1\user_projects_cluster\mydomain>ENDLOCAL
D:\bea1\user_projects_cluster\mydomain>ENDLOCAL
D:\bea1\user_projects_cluster\mydomain> -
Unable to communicate to Admin server on remote machine
I'm trying to add a server in CF builder but am getting the following error, I'm pretty sure I've entered everything inclusing the naming port correct in correctly:
Unable to communicate to Admin server on remote machine. Ensure the Admin server is running and correct JNDI port is provided
Any advice friends?It was but it shouldn't affect Sync users.
I will ask you to try again in a couple of hours. Are you trying to set it up or access your data? -
How to install managed server on another machine
Can anybody point me where I can find related installation doc?
Thanks in advanceI want to configure the manages servers in a windows 2000 environment......
to do eastblish this environment, I do not want to install the weblogic on client machine(I mean developer machine). I wanted to install weblogic on one server and on a remote machines, i want to map the server(WLS) machine and do work from there.....I wonder with out installing the WLS on client machine(developer machine),..is this possible to start managed server from client machines with out installing wls on that tmachines......?, with wls installed on client machine, its working perfecr........ but can I start/stop managed servers with out wls installation on client machine ....?if so ...how..? what scripts to modify........?
Thanks -
Creating Weblogic domain with Admin Server and managed servers on different
I am trying to create Weblogic domain where Admin Server and managed servers on different machines. However I am unable to find any steps which would allow me to do so. The config.sh script always creates an Admin Server. Please help.
Whilst the method that Lawrence gives can result in a domain that is perfectly functional, it is a method that can result in errors as you are having to enter the same information twice. Also you will create two admin servers, as the second domain creation will have the console added to it on the renamed admin server and this will give issues.
The best method to create a domain spamming multiple physical machines, is to create the domain with all the components on the first machine. This means planning the domain and making sure all components are added once; so having the information about the domain written out is wise. Ensure that the WLS software is installed in the same path on each machine before starting.
Then copy the domain that you have created from one machine to the other, keeping the same paths. You can simply copy (I've used this method multiple times without issue) but the supported way would be to use the WLST PACK and UNPACK methods. These create and extract domains from templates. Some more information on these is given here -> http://docs.oracle.com/cd/E13179_01/common/docs100/pack/intro.html#wp1069056 -
Users will use form to fill in stats for enquiries so they want to keep form open, complete a form, click button to submit by email, then click another button to clear form, form now ready to accept form's responses. They dont' want to keep opening form each time form needs to be completed.
Hope you help.
Thanks SandraHi,
Thanks for your response, not sure what you mean by a loop. I put together
a draft form to show staff in our Knowledge Centre the sort of thing
Livecycle Designer can do.
(See attached file: Library Request Form_pub_0001.pdf)
They are currently writing out on form and manually putting into excel to
keep stats on the requests.
Due to current Global Financial Crisis my section does not want to spend
extra money at the moment seeking assistance from our tech heads. So we
are looking for least work no expense option for keeping stats. I am a PA
who just happens to have Livecycle program on my computer.
We use Lotus Notes so I thought the staff could save copy of Library
request form in the stationery folder. The staff using the form want to be
able to do the following:
1. open the Library request form at the beginning of the day;
2. when a request comes in, complete the form and click on Send by email
button
3. click on a Clear Data button to clear all data from all fields so the
form is open ready for when the next request comes in.
Staff are time poor and, as this is only one of their numerous duties, they
don't want to keep going to a location and opening a file which can be very
slow on some days
Each day form may be filled out by approximately 15 staff who may receive
anything from 0 - 4 requests a day.
I am not a tech head so script writing is a deep, dark mystery. Can you
help using the form above as an example for achieving step 3 above.
Thanks,
Sandra Smith
Personal Assistant
PricewaterhouseCoopers Australia
Office: ++61 (2) 8266 9069
Fax: ++61 (2) 8286 9069
[email protected]
http://www.pwc.com/au
Kacyndra
<[email protected]
> To
Sandra K Smith/AU/TLS/PwC@AsiaPac
08/08/2009 12:25 cc
AM
Subject
Livecycle
Please respond to Designer 8 - Is it possible to have
clearspace-200985 button to clear fields after user
0098-481178-2-216 has clicked submit by email button
[email protected]. so user can reuse form to send
adobe.com another response with different
answers?
if i understand this correctly, you just want everything cleared whena
buttons is pressed?
you can either do it individually:
on button click:
mytextField.rawData=""
or do a loop, using child/paretns.. -
HT1391 How do I send iBooks to another device with different email
How do I move purchased books to another iPad with different email
ibooks, like other iTunes purchases/downloads, are tied to your iTunes account. If the other iPad is using your account then you should be able to re-download it directly on that iPad via the Store button at the top left of the bookshelf in the iBooks app and then the Purchased tab, or you can sync them to it via your computer's iTunes.
-
Start Managed Server from Another Machine
Hello,
In a two machines cluster starting a managed on the secondary machine not the
one hosting the admin server, I keep getting the following error:
Managed server log error:
The WebLogic Server did not start up properly.
Exception raised: 'javax.management.AttributeNotFoundException: Attribute AdministrationMBeanAuditingEnabled
not found for MBean orsus:Name=orsus,Type=Domain'
Reason: javax.management.AttributeNotFoundException: Attribute AdministrationMBeanAuditingEnabled
not found for MBean orsus:Name=orsus,Type=Domain
Admin Server log:
<Feb 5, 2004 9:20:17 AM GMT+02:00> <Error> <Management> <BEA-140001> <An error
occurred while getting attribute AdministrationMBeanAuditingEnabled on MBean orsus:Name=orsus,Type=Domain.
Method: null. Exception: javax.management.AttributeNotFoundException: Attribute
AdministrationMBeanAuditingEnabled
not found for MBean orsus:Name=orsus,Type=Domain.
javax.management.AttributeNotFoundException: Attribute AdministrationMBeanAuditingEnabled
not found for MBean orsus:Name=orsus,Type=Domain
at weblogic.management.internal.DynamicMBeanImpl.getXAttributeInfo(DynamicMBeanImpl.java:1917)
at weblogic.management.internal.DynamicMBeanImpl.getAttribute(DynamicMBeanImpl.java:585)
at weblogic.management.internal.ConfigurationMBeanImpl.getAttribute(ConfigurationMBeanImpl.java:177)
at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1183)
at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1153)
at weblogic.management.internal.RemoteMBeanServerImpl.getAttribute(RemoteMBeanServerImpl.java:284)
at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:466)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:409)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:353)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:144)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:404)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
>
<Feb 5, 2004 9:20:18 AM GMT+02:00> <Warning> <Management> <BEA-141138> <Managed
Server orsusClusterNode_2 is disconnected from the admin server. This may be either
due to a managed server getting temporarily partitioned or the managed server
process exiting.>
<Feb 5, 2004 9:20:18 AM GMT+02:00> <Error> <Kernel> <BEA-000802> <ExecuteRequest
failed
weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested
exception:
[weblogic.rjvm.PeerGoneException: ; nested exception is:
weblogic.utils.net.SocketResetException].
weblogic.rjvm.PeerGoneException: ; nested exception is:
weblogic.utils.net.SocketResetException
at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:138)
at weblogic.management.internal.RemoteMBeanServerImpl_812_WLStub.addNotificationListener(Unknown
Source)
at weblogic.management.internal.BaseNotificationListenerImpl.addFilterAndHandback(BaseNotificationListenerImpl.java:48)
at weblogic.management.internal.MBeanProxy.addNotificationListener(MBeanProxy.java:350)
at weblogic.server.ServerLifeCycleRuntime$1.execute(ServerLifeCycleRuntime.java:523)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Caused by: weblogic.utils.net.SocketResetException
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:111)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
... 2 more
--------------- nested within: ------------------
weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested
exception:
[weblogic.rjvm.PeerGoneException: ; nested exception is:
weblogic.utils.net.SocketResetException]
at weblogic.management.internal.RemoteMBeanServerImpl_812_WLStub.addNotificationListener(Unknown
Source)
at weblogic.management.internal.BaseNotificationListenerImpl.addFilterAndHandback(BaseNotificationListenerImpl.java:48)
at weblogic.management.internal.MBeanProxy.addNotificationListener(MBeanProxy.java:350)
at weblogic.server.ServerLifeCycleRuntime$1.execute(ServerLifeCycleRuntime.java:523)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
Any ideas?
Regards.
Eran
[wlerrlog.txt]
Do both the machines have the same weblogic server installation? Looks
like there is a conflict, the machine where the managed server is
running has a weblogic server version lesser than the admin server.
Check the versions on both machines.
java weblogic.version
should print the version information.
Thanks,
-satya
eran wrote:
>
> Hello,
>
> In a two machines cluster starting a managed on the secondary machine not the
> one hosting the admin server, I keep getting the following error:
>
> Managed server log error:
> ***************************************************************************
> The WebLogic Server did not start up properly.
> Exception raised: 'javax.management.AttributeNotFoundException: Attribute AdministrationMBeanAuditingEnabled
> not found for MBean orsus:Name=orsus,Type=Domain'
> Reason: javax.management.AttributeNotFoundException: Attribute AdministrationMBeanAuditingEnabled
> not found for MBean orsus:Name=orsus,Type=Domain
>
>
> Admin Server log:
> <Feb 5, 2004 9:20:17 AM GMT+02:00> <Error> <Management> <BEA-140001> <An error
> occurred while getting attribute AdministrationMBeanAuditingEnabled on MBean orsus:Name=orsus,Type=Domain.
> Method: null. Exception: javax.management.AttributeNotFoundException: Attribute
> AdministrationMBeanAuditingEnabled
> not found for MBean orsus:Name=orsus,Type=Domain.
> javax.management.AttributeNotFoundException: Attribute AdministrationMBeanAuditingEnabled
> not found for MBean orsus:Name=orsus,Type=Domain
> at weblogic.management.internal.DynamicMBeanImpl.getXAttributeInfo(DynamicMBeanImpl.java:1917)
> at weblogic.management.internal.DynamicMBeanImpl.getAttribute(DynamicMBeanImpl.java:585)
> at weblogic.management.internal.ConfigurationMBeanImpl.getAttribute(ConfigurationMBeanImpl.java:177)
> at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1183)
> at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1153)
> at weblogic.management.internal.RemoteMBeanServerImpl.getAttribute(RemoteMBeanServerImpl.java:284)
> at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown
> Source)
> at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:466)
> at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:409)
> at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:353)
> at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:144)
> at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:404)
> at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
>
> <Feb 5, 2004 9:20:18 AM GMT+02:00> <Warning> <Management> <BEA-141138> <Managed
> Server orsusClusterNode_2 is disconnected from the admin server. This may be either
> due to a managed server getting temporarily partitioned or the managed server
> process exiting.>
> <Feb 5, 2004 9:20:18 AM GMT+02:00> <Error> <Kernel> <BEA-000802> <ExecuteRequest
> failed
> weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested
> exception:
> [weblogic.rjvm.PeerGoneException: ; nested exception is:
> weblogic.utils.net.SocketResetException].
> weblogic.rjvm.PeerGoneException: ; nested exception is:
> weblogic.utils.net.SocketResetException
> at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
> at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:138)
> at weblogic.management.internal.RemoteMBeanServerImpl_812_WLStub.addNotificationListener(Unknown
> Source)
> at weblogic.management.internal.BaseNotificationListenerImpl.addFilterAndHandback(BaseNotificationListenerImpl.java:48)
> at weblogic.management.internal.MBeanProxy.addNotificationListener(MBeanProxy.java:350)
> at weblogic.server.ServerLifeCycleRuntime$1.execute(ServerLifeCycleRuntime.java:523)
> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
> Caused by: weblogic.utils.net.SocketResetException
> at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:111)
> at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
> ... 2 more
> --------------- nested within: ------------------
> weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested
> exception:
> [weblogic.rjvm.PeerGoneException: ; nested exception is:
> weblogic.utils.net.SocketResetException]
> at weblogic.management.internal.RemoteMBeanServerImpl_812_WLStub.addNotificationListener(Unknown
> Source)
> at weblogic.management.internal.BaseNotificationListenerImpl.addFilterAndHandback(BaseNotificationListenerImpl.java:48)
> at weblogic.management.internal.MBeanProxy.addNotificationListener(MBeanProxy.java:350)
> at weblogic.server.ServerLifeCycleRuntime$1.execute(ServerLifeCycleRuntime.java:523)
> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
>
> Any ideas?
>
> Regards.
> Eran
>
>
>
>
> ------------------------------------------------------------------------
>
> Managed server log error:
> ***************************************************************************
> The WebLogic Server did not start up properly.
> Exception raised: 'javax.management.AttributeNotFoundException: Attribute AdministrationMBeanAuditingEnabled not found for MBean orsus:Name=orsus,Type=Domain'
> Reason: javax.management.AttributeNotFoundException: Attribute AdministrationMBeanAuditingEnabled not found for MBean orsus:Name=orsus,Type=Domain
> ***************************************************************************
>
>
> Admin Server log:
> <Feb 5, 2004 9:20:17 AM GMT+02:00> <Error> <Management> <BEA-140001> <An error occurred while getting attribute AdministrationMBeanAuditingEnabled on MBean orsus:Name=orsus,Type=Domain. Method: null. Exception: javax.management.AttributeNotFoundException: Attribute AdministrationMBeanAuditingEnabled
> not found for MBean orsus:Name=orsus,Type=Domain.
> javax.management.AttributeNotFoundException: Attribute AdministrationMBeanAuditingEnabled not found for MBean orsus:Name=orsus,Type=Domain
> at weblogic.management.internal.DynamicMBeanImpl.getXAttributeInfo(DynamicMBeanImpl.java:1917)
> at weblogic.management.internal.DynamicMBeanImpl.getAttribute(DynamicMBeanImpl.java:585)
> at weblogic.management.internal.ConfigurationMBeanImpl.getAttribute(ConfigurationMBeanImpl.java:177)
> at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1183)
> at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1153)
> at weblogic.management.internal.RemoteMBeanServerImpl.getAttribute(RemoteMBeanServerImpl.java:284)
> at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown Source)
> at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:466)
> at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:409)
> at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:353)
> at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:144)
> at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:404)
> at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
>
> <Feb 5, 2004 9:20:18 AM GMT+02:00> <Warning> <Management> <BEA-141138> <Managed Server orsusClusterNode_2 is disconnected from the admin server. This may be either due to a managed server getting temporarily partitioned or the managed server process exiting.>
> <Feb 5, 2004 9:20:18 AM GMT+02:00> <Error> <Kernel> <BEA-000802> <ExecuteRequest failed
> weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
> [weblogic.rjvm.PeerGoneException: ; nested exception is:
> weblogic.utils.net.SocketResetException].
> weblogic.rjvm.PeerGoneException: ; nested exception is:
> weblogic.utils.net.SocketResetException
> at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
> at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:138)
> at weblogic.management.internal.RemoteMBeanServerImpl_812_WLStub.addNotificationListener(Unknown Source)
> at weblogic.management.internal.BaseNotificationListenerImpl.addFilterAndHandback(BaseNotificationListenerImpl.java:48)
> at weblogic.management.internal.MBeanProxy.addNotificationListener(MBeanProxy.java:350)
> at weblogic.server.ServerLifeCycleRuntime$1.execute(ServerLifeCycleRuntime.java:523)
> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
> Caused by: weblogic.utils.net.SocketResetException
> at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:111)
> at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
> ... 2 more
> --------------- nested within: ------------------
> weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
> [weblogic.rjvm.PeerGoneException: ; nested exception is:
> weblogic.utils.net.SocketResetException]
> at weblogic.management.internal.RemoteMBeanServerImpl_812_WLStub.addNotificationListener(Unknown Source)
> at weblogic.management.internal.BaseNotificationListenerImpl.addFilterAndHandback(BaseNotificationListenerImpl.java:48)
> at weblogic.management.internal.MBeanProxy.addNotificationListener(MBeanProxy.java:350)
> at weblogic.server.ServerLifeCycleRuntime$1.execute(ServerLifeCycleRuntime.java:523)
> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
>
-
Windows Service, SSPI, Kerberos, SQL Server on another machine.
Hi,
I have a TCPIP service running on SERVER which connects to a SQL Server that is located on another machine. (SQLSERVER).
The client authenticates with the SERVER using the Kerberos security package successfully.
the 3 machines are in the same domain.
When the service is running under the System account, the connection to the SQL Server machine succeeds (I have enabled the "Trust computer for delegation" option for the SERVER machine).
But When the service is running under a specific user profile (eg: USER1), the connection to the SQL Server machine fails with this error:
Login failed for user 'AUTORITE NT\ANONYMOUS LOGON'
I have tried toadd the "Impersonate a client after authentication" user right for USER1 in the Local Security Policy, but it does not solve the problem.
Does someone know what is wrong here please?
Thank you,
Olivier gg.
(Note: the "Forest Functional Level" of the domain is Win2000).Retried in a test domain with
Forest Functional Level set to 2008, and figured out what to do.
This page (How To: Use Impersonation and Delegation in ASP.NET 2.0, (http://msdn.microsoft.com/en-us/library/ms998351.aspx#paght000023_delegation) especially the
Use Kerberos authentication and delegation part) helped me.
However something remains unclear: I had first selected the "Trust this user for delegation to any service (Kerberos only)" option for the domain user,
but it did not work (Does someone know why?).
I had to select the "Trust this user for delegation to specified services only" option and specify explicitely the appropriate SPN in order to have the delegation working. -
Unable to connect to Admin Server from second machine using WLST
Hello,
PROBLEM
Can't get WLST to connect to admin server from 2nd host to register the domain.
SETUP
I have 2 Centos VMs running on Oracle Virtual box in a single laptop. Both the VMs use "Bridged Networking".
VM-1 CONFIG
cat /etc/hosts
192.168.1.17
dom1 dom1.my mac1
192.168.1.51
centos2 mac2
VM-1 hosts admin server & one managed server
VM-2 CONFIG
192.168.1.51
mac2
192.168.1.17
centos1 mac1
VM-2 hosts just one managed server
I can start up admin on VM-1 fine. The node manager is reachable too. Both the VMs are can be pinged from each other. I can also telnet to the admin server's port ( telnet 192.168.1.17 7001) from the second server.
My HOST OS is Windows 7. I can ping from windows to both the VM IPs too. The reverse is working fine as well.
I've tried both mechanisms of copying the whole domain from machine 1 over to machine2 & also using the pack.sh/unpack.sh combinations to transfer the domains.
When I invoke WLST, this is what happens
./wlst.sh
CLASSPATH=/apps/prod/appservers/weblogic/wls_10_3_6/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/apps/prod/appservers/weblogic/wls_10_3_6/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/java-1.7.0-openjdk-1.7.0.25.x86_64/lib/tools.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/server/lib/weblogic_sp.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/server/lib/weblogic.jar:/apps/prod/appservers/weblogic/wls_10_3_6/modules/features/weblogic.server.modules_10.3.6.0.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/server/lib/webservices.jar:/apps/prod/appservers/weblogic/wls_10_3_6/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/apps/prod/appservers/weblogic/wls_10_3_6/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/apps/prod/appservers/weblogic/wls_10_3_6/utils/config/10.3/config-launch.jar::/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/common/derby/lib/derbynet.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/common/derby/lib/derbyclient.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/common/derby/lib/derbytools.jar::
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> connect('weblogic','weblogic123','t3://192.168.1.17:7001')
Connecting to t3://192.168.1.17:7001 with userid weblogic ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 22, in connect
File "<iostream>", line 648, in raiseWLSTException
WLSTException: Error occured while performing connect : Error connecting to the server : Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine.
Use dumpStack() to view the full stacktrace
wls:/offline> dumpStack()
This Exception occurred at Fri Oct 11 17:11:07 NZDT 2013.
java.lang.AssertionError: Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine.
java.lang.AssertionError: Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine.
wls:/offline>
Also, I can't invoke weblogic.Admin from the second VM despite setting the environment using "setWLSEnv.sh". i get the error "Error: Could not find or load main class weblogic.Admin".
Please could you help me fix this? I've spent 3 days now trying numerous things without much luck :-(
Kind RegardsHi Raj,
Issue is with NM registry with domain home. Please follow the below steps and let us know the status.
1 . Check whether the node manager port ( default 5556 ) is opened for communication on both Admin and Managed server.
2 . After opening the port - We would need to enroll the node manager home with domain home to establish the communication between Admin and Managed server.
a . Start the Administration Server.
b . Using the Administration Console update the Node Manager credentials from the Advanced options under domain_nameArrow symbolSecurityArrow symbolGeneral.
c . Invoke WLST and connect to an Administration Server using the connect command. See Using the WebLogic Scripting Tool in WebLogic Scripting Tool.
d . Run nmEnroll using the following syntax:
nmEnroll([domainDir], [nmHome])
Running nmEnroll() ensures that the correct Node Manager user and password token are supplied to each Managed Server. Once these are available for each Managed Server, you can use nmConnect() in a production environment.
Note: You must run nmEnroll() on each machine that is running a Managed Server. Additionally, you should run nmEnroll() for each domain directory on each machine.
For more info : General Node Manager Configuration
Thanks
Lakshman -
DHCP Failover / Migrate DHCP Server to another Machine
We have DHCP Server Installed in Domain Controller with Windows Server 2008 R2 Based OS.
I have Checked that there is no way to make the DHCP Failover in Server 2008 R2.
Can anyone help me to get some level of Failover in DHCP?
or
If I want to migrate the DHCP to Server 2012 what is the Best Practice?Hello,
There is no big challenge for configuring DHCP failover in Windows 2008 platform. Kindly go through with this link for configuring DHCP failover. I am sure it will help you to completing your task.
1> Step-by-Step: Configure DHCP for Failover
http://technet.microsoft.com/en-us/library/hh831385.aspx
2> DHCP Step-by-Step Guide: Demonstrate DHCP Failover – Clustering in a Test Lab
http://technet.microsoft.com/en-us/library/ee405263(v=ws.10).aspx
Process of Migration DHCP Server 2008R2 to Windows 2012
• Firstly, you can disable the DHCP role in Windows Server 2008 R2. However, if the Windows Server 2012 is down, the clients cannot renew their IP lease duration and obtain IP address.
Therefore, it is recommended to leave the DHCP role in Windows Server 2008 R2 and deploy high availability. Windows Server 2012 brings the new feature: DHCP failover. However it requires both DHCP Servers are Windows Server 2012. Consider another Server
is Windows Server 2008 R2, we have to choose one of the following:
>> DHCP in a Windows failover cluster. This option places the DHCP server in a cluster with an additional server configured with the DHCP service that assumes the load if the primary DHCP server fails. The clustering deployment option uses
a single shared storage. This makes the storage a single point of failure, and requires additional investment in redundancy for storage. In addition, clustering involves relatively complex setup and maintenance.
>> Split scope DHCP. Split scope DHCP uses two independent DHCP servers that share responsibility for a scope. Typically 70% of the addresses in the scope are assigned to the primary server and the remaining 30% are assigned to the backup server.
If clients cannot reach the primary server then they can get an IP configuration from the secondary server. Split scope deployment does not provide IP address continuity and is unusable in scenarios where the scope is already running at high utilization of
address space, which is very common with Internet Protocol version 4 (IPv4).
More references:
Step-by-Step: Configure DHCP for Failover (Windows
Server 2012)
How
to configure split-scope using wizard
DHCP
Step-by-Step Guide: Demonstrate DHCP Split Scope with Delay on a Secondary Server in a Test Lab
DHCP
Step-by-Step Guide: Demonstrate DHCP Failover – Clustering in a Test Lab
If you need snap shot of migration then follow these links.
http://blogs.technet.com/b/canitpro/archive/2013/04/29/step-by-step-migration-of-dhcp-from-windows-server-2003-to-windows-server-2012.aspx
http://www.mehrban.net/migrating-dhcp-from-windows-2008-to-windows-2012
Deepak Kotian.
MCP, MCTS, MCITP Exchange 2010 Ent. Administrator
Disclaimer:
Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognizes useful contributions. Thanks!
All the opinions expressed here is mine. This posting is provided "AS IS" with no
warranties or guarantees and confers no rights. -
Connection fails if server and clients are in different subnets
Hello,
our Volume License Manager (v2.1) is running in another subnets than the clients (All machines are running under Windows XP-SP2 without Domains or ADS, just workgroups).
The server is in subnet A (192.168.42.0/24), all clients are located in another subnet B (192.168.50.0/24).
Routing is properly configured and is working fine, traffic to the specific hosts is not blocked by a firewall. We can ping every machine,
open telnet connections to the NILM, everything works.
But if the clients try to connect to the remote NILM (both local client NI License Manager and VLM port settings are correct) their connection attempt always
times out with error code "NILM10"
(I already read the mentioned KBs, no solution has helped so far). This is true if clients and server are separated.
For testing purposes, i plugged one client into the server's subnet (server's IP: 192.168.50.250, client 192.168.50.10)
and it worked perfectly. Is there a reason why server and client have to be on the same subnet or is it some other kind of problem that I am not aware of?
Thank you.
ThorstenHello Thorsten,
Did you add the server's domain to the client computer's DNS settings. To do this, complete the following steps on the client computer:
1. Open Local Area Network Settings from the Control Panel (Start»Control Panel»Network Connections»Local Area Connection)
2. Click the Properties button
3. Select Internet Protocol (TCP/IP) from the list of network components
4. Click the Properties button
5. Click the Advanced button
6. Change to the DNS tab
7. Ensure Append these DNS suffixes is selected
8. Click the Add button
9. Enter the domain suffix of the license server and click Add
10. Close any open dialog boxes, choosing OK and Close as necessary.
(http://digital.ni.com/public.nsf/allkb/3AAF37CD7B89A2CD86257070005A075A?OpenDocument)
Further you should check this KBs.
Why is My NI License Manager Slow or Not Responsive with a Configured Network Server on Another Domain?
http://digital.ni.com/public.nsf/allkb/27D6BD8116EF257A862572F2005C2181?OpenDocument
How Can I Access NI Volume License Manager from a Different Network or Behind a Firewall?
http://digital.ni.com/public.nsf/websearch/54E52C3F348B929786256DCD0056B19B?OpenDocument
Regards,
WolfgangZ -
Moved report server to new machine with all old settings
Dear all,
I am going to moved to new server machine for SSRS and i have 200+ reports ,,
i have configure report server in new machine but reports configuration pending
i thought i would need help of others to do this because i have a quetion? that
How can moved my 200 reports to new machine with all configurations includes 40 subscriptions , and much more
with parameter values setting ??
is there simple way?? rather than doing one by one ..
like i just copy mu old report server to new report server..
Help me please ??
Dilip Patil..Hi Dilip,
After testing the issue in my environment, we can try to use the RS.exe utility to execute a Reporting Services RSS script that copies content items and settings from one SQL Server Reporting Services report server to another report server.
To achieve this goal, please refer to the following steps:
using the RS.exe utility Download the script file from the CodePlex site
Reporting Services RS.exe script migrates content to a local folder, for example c:\rss\ssrs_migration.rss.
Open a command prompt with administrative privileges.
Navigate to the folder containing the ssrs_migration.rss file.
Run the following command to migrate contents from the native mode Sourceserver to the native mode Targetserver:
rs.exe -i ssrs_migration.rss -e Mgmt2010 -s
http://SourceServer/ReportServer -u Domain\User -p password -v ts="http://TargetServer/reportserver" -v tu="Domain\Userser" -v tp="password"
Besides, if the destination report server is SharePoint mode, we can also try to use Reporting Services Migration Tool to achieve your requirement. For more details, please see:
http://msdn.microsoft.com/en-us/library/dn600370.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Maybe you are looking for
-
Blur edges in stacked image output file
Hi, I'm using the auto align and auto blend feature to stacked images for increased DOF. My source files are clean no ghosting, blur or what ever. After I run the files through the auto align and then auto blend I flatten the stack of layers. The f
-
Ipad Mini keeps coming up with Slide to power off every 2 seconds. Havve updated all APPS and tried the home and other key to reset but still the same. Can someone hel pas we live very remotely
-
TDS Upgarde Utility Error!
Hi, While performing TDS upgrade from the excel sheet using TDS upgrade utility, system is performing the check (checking operation) and system give "Cannot perform '=' operation on System.Double and System.String." Please reply ASAP. Thanks.......
-
My Microsoft Comfort Mouse 3000 middle button is set in Firefox to open and close tabs. (In Control Panel, Mouse, Firefox is the only program exception and the Wheel button is set to middle-click instead of the default Instant Viewer). When vlc media
-
I've lost the admin rights to my hard drive...?
All of a sudden I can no longer add/remove things on my HDD. I have my OS on a SSD and I've been able to access everything just fine until yesterday...Is there any way to fix this without system restore? I'd really rather not go through that headac