Restarting a podcast after no activity for 1.5 years. 72 hours and not showing in iTunes
Hello. I walked away from my podcast December 2012 and am finally returning to it. My feed is still the same. It validates and I can subscribe to the 'cast directly through iTunes. My problem is that it's been 72 hours since the latest episode went live and my show doesn't show up in search. I still have my confirmation email with a link to the podcast but when I click it, it says the podcast is "currently not available in the US store".
Do I need to contact iTunes support or should I wait it out awhile longer
Thanks!
Your podcast has evidently been removed - possibly because it wasn't updated for a long time (though they are not consistent about this, mine hasn't been updated for longer than that and is still there, so far). You will need to re-submit the feed as a new podcast. When you do this you will probably be told it has already been submitted - this is a bug in the process - and to get round that you will need to change the title slightly. (Waiting it out will have no effect.)
Similar Messages
-
My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion... Help!!!
Several problems with Mountain Lion, APP STORE (login/logout error), WIFI(802.11n for 802.11g), MAIL (horrible)... Apple, what is happening?Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility. -
Microcell stopped working after working fine for over a year
Hi everyone, My Microcell stopped working after working fine for over a year
What happens now is that when it boots up all is green but the wireless network bars LED keeps flashing forever.
I know that as part of the normal boot process it first scans all 3G channels to pick the least conflicting ones before it initializes the internal 3G radio. Typically that takes good 10 minutes. However now it never finishes that scan and gets stuck there blinking green forever. Obviously nothing has changed on my side of things; I don't know whether something has changed in the neighborhood in terms of AT&T area controller or what not. Any help will be very much appreciated. Thak you!Answer ALL the questions below as best you can and we'll try to help you.
MicroCell™ TroubleShooting Questions:
Have you read the Tech Guide first? 3G MicroCell Technical Guide by Otto Pylot
Do you have an active postpaid AT&T mobile account?
Is your MicroCell white or black?
Who is your ISP and is your service ADSL, cable, wireless or satellite?
What are your suscribed download and upload speeds as stated by your ISP?
Have you tested your internet speeds (http://www.speedtest.net/)? Please run the test and post your latency, download and upload speeds.
Have you tested your connection for VoIP quality (http://www.voipqualitytest.com/)? Please run the test and post the results that are listed under the "Advanced" tab.
Are you using the basic connection (modem -> router -> MicroCell) or the alternate connection (modem -> MicroCell -> router/computer)? The alternate connection is not possible with the black (DPH-154) MicroCell as it has no Ethernet output but it can be connected directly to the modem to temporarily test the Microcell without the network connected.
Are all of the cables firmly in place?
Do you have a combined modem/router (gateway) or a separate modem and router? What are the makes and model numbers for your equipment?
Have you met the minimum requirements for router settings as outlined in the Tech Guide?
What other equipment (access points, switches, computers, WiFi components, gaming consoles, etc.) do you have connected to your network?
What does the light pattern look like on the MicroCell (power, ethernet, GPS, and 3G)? Are they all a solid green or is any of them blinking green or red, and if so, which one?
Have you done a hard reset of the MicroCell? See the Tech Guide for instructions.
Have you deactivated and reactivated your Mcell using AT&T's MicroCell website?
Does the ac adapter feel warmer than the top of the MicroCell where the vents are? -
Giving old ipad to partner after using it for six months. Icloud, FaceTime and store Apple ID revised no problem. I'd like to change my iMessage user id too. It won't let me. Anyone know how?
Look at this link.
Giving your former iPad to a spouse or family member: the quick guide
http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/
Cheers, Tom -
After upgrading to Mountain Lion from Lion, Mail, Safari and note need about five minutes to start.
After upgrading to Mountain Lion from Lion, Mail, Safari and Note need about five minutes to start.
After starting, Mail answers are very very slow. The same for Note. Instead of, sending mails is only a bit slower than before upgrading.
In Safari, I choose Goggle as starting page in Preferences, but at every restart misses that starting page and the search strip says "Seek Google or instert an address".Well, I found the solution here in another thread.
i just want to mention that the samw thing was happening also for the notes and the reminders apps!! (they quit unexpectedly!!).
So I found the solution here.
Thank you graphicsluc!!! -
Iphone is not showing in Itunes after Ipad
I have my iphone 4 for 2 years now and it works with my itunes flawlessly, until recently I bought my Ipad 3.
Ipad 3 cannot be seen in itunes, so I googled it and did this steps.
Disconnect Apple tablet from computer.
Go to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers folder on your PC
Locate usbaapl.inf file in this folder, right click on it and choose install
After installation complete reboot computer
Connect your iPad. For now on it should be in the device list on iTunes.
I updated my itunes too.
Now my Iphone is not showing up! Tried connecting my ipad and it works without problem.
Tried everything on the net. Even did this:
1. Open Start Menu >> Run and type services.msc and press ok [ this will open up services ]
2. Locate the service named Mobile Device Driver
3. Double click the service to open properties
4. In the "general" tab find the "startup type" drop-down arrow menu and make sure "automatic" is selected.
5. Also see the general tab to check the "service status". If it does not say "started" then click the start button to start the service and connect your phone again and click apply.
Note: If the above procedure does not helped in your case, then try restarting the service
Both my devices can be seen on my PC, just not iphone on itunes.
Rebooted my phone too. Restoring is my last option....when you googled to find out what iPhone error 1604 meant, what did you learn?
what steps have you taken thus far based on what your understanding of the error code meant? -
Podcast artwork does not show in ITunes store
I recently began producing a music podcast http://itunes.apple.com/us/podcast/felony-buddha/id375837423.
I am using blogger http://www.felonybuddha.com and feedburner http://www.felonybuddha.com/feeds/posts/default?alt=rss.
Initially I did not have the artwork url in SmartCast but I updated Smartcast
on 06/04/2010 with this url http://4.bp.blogspot.com/PuXcBmmd7sY/TAmrnudmrHI/AAAAAAAAAAM/W8kCV6S3N2U/s1600/iStock000010405007XSmall.jpg. I sent a Ping but the podcast artwork still does not show in Itunes store.
What am I doing wrong? Thank you for your help.The Feedburner feed is probably OK: it does have the declaration and the correct image reference.. As there are no line returns separating the tags it appears either as one or two long lines or as a slab of text, so it's very difficult to read, and you might want to go through your original feed if you can, and put some line returns in.
Assuming it to be OK, you have two possibilities: both involve you editing the original feed.
For clarity let's label the feeds;
Feed 1 is your original, http://www.felonybuddha.com/feeds/posts/default?alt=rss
Feed 2 is the Feedburner-generated one, http://feeds.feedburner.com/felonybuddha/MhvA
Method 1: amend feed 1 to contain the necessary tags. The top section of the feed should read:
<?xml version='1.0' encoding='UTF-8'?>
<rss xmlns:atom='http://www.w3.org/2005/Atom'
xmlns:openSearch='http://a9.com/-/spec/opensearchrss/1.0/'
xmlns:georss='http://www.georss.org/georss'
xmlns:thr='http://purl.org/syndication/thread/1.0' version='2.0'
xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" version="2.0">
<channel>
Then in the top section of the feed, after 'channel' and before the first 'item' tag, add:
<itunes:image href="http://4.bp.blogspot.com/PuXcBmmd7sY/TAmrnudmrHI/AAAAAAAAAAM/W8kCV6S3N2U/s1600/iStock000010405007XSmall.jpg" />
making sure you don't get this inside another tag (and there must be no line breaks within this). There are still other tags missing, which though they aren't essential, ought really to be there.
Method 2: this might be preferable - redirect iTunes to Feed 2. Feedburner does add a lot of garbage to the feed (intended for compatibility with other rss readers) but they shouldn't cause any problems; however there are some caveats, see below. The method:
You will need to add the following tag to Feed 1, after the 'channel' tag and before the first 'item' tag:
<itunes:new-feed-url>http://feeds.feedburner.com/felonybuddha/MhvA</itunes:new-feed-url>
Before doing this you should read this Apple Tech Note just so that you are completely clear what you are doing.
Re-upload the feed and leave it there until iTunes has changed to the new feed - this may take some days. To check whether it's changed, go to the Store page for your podcast, click on the 'Subscribe' button, go to the 'Podcasts' section in the sidebar, and click on the 'i' button on the extreme right of the line for your overall podcast (not the episode). The pane which pops up contains the feed iTunes is using.
Caveats:
Make sure you get the URL exactly right in the redirect. If you make a mistake *you will not be able to get it back* once iTunes has redirected.
Be aware that once you have transferred to Feed 2 you cannot edit that feed directly, only the feed you submit to Feedburner. This may possibly mean that if you later want to redirect to another feed you won't be able to. -
All is in the title, so I repeat it below with a better identation.
What are the pros and cons of
1) choosing to use the SAME
Apple ID for iCloud services on one side, and
purchases on the iTunes Store, App Store, and iBookstore, on the other side; or
2) to have and use two separate Apple Ids for these "two sides"?
P.S.
I have loads and loads of free podcasts in iTunes in my iMac, that are certainly more thant the 5 gigas the iCloud provides for free, so I don't want those to go to the cloud. But this is perhaps a different question...
Also need to mention that I have itunes on a mac, a pc and an iphone.
Sorry to look so silly with this question, but I don't get the "big picture".You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.
-
HT201250 looking for an app that was not restored to my ipad and not showing up in purchsed
how do i find an app, paid for over a year ago, that failed to show up in my purchased apps, after restoring my ipad.
How can i finf it in the time machine?You can try the 'report a problem' page to contact iTunes Support (we are fellow users here on these forums) : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
hey all, I have been getting the "cannot get mail" error message on my iphone5 suddenly.
ive been using iphone to check two email accounts for months now, one is gmail and not troubled. the other is mail from thunderbird and i get this error message now saying it is not responding. no settings have been changed or anything, it just suddenly stopped receiving mail on my device as of Tuesday afternoon.
Does anyone have iny ideas about why? i have yet to update to the new OS7 yet, could that be it?'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
After an initial sync my iphone phots are gone and not on the computer, can i retrieve them?, After an initial sync my iphone phots are gone and not on the computer, can i retrieve them?
Is this is a new iPhone that had never been synced with iTunes on any computer - the first time this iPhone was connected to iTunes on this computer which has been used to sync with another iPhone or iOS device?
The first time a new iPhone is connected to iTunes on a computer that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device, or set up the iPhone as a new iPhone.
If you choose the former, the Camera Roll on the new iPhone is replaced with the Camera Roll contents included with the backup for the other iPhone or iOS device.
Syncing with iTunes alone does not touch the iPhone's Camera Roll. -
After an initial sync my iphone photos are gone and not on the computer, can i retrieve them?, After an initial sync my iphone phots are gone and not on the computer, can i retrieve them?
taylorumbc wrote:
I sync my iPhone, which has plenty of space for all my songs. When I look at my phone later, there are songs with the damned download icon. Why?
because they have not been **** well downloaded to your iPhone and Setttings > Music has Show all music turned on...
Why can't I download them properly to my phone?
Are they selected to sync in iTunes? -
My Ipod does not show in Itunes, when I connect it shows for a second a disappears again, I have gone through the trouble shooting but no luck?
:-) the problem is solved. Thanks to a great typ in one of the other discussions with alt+cmd+S iTunes looks again like something I recognize. After removing the iPod from iMac and also from the connecting "holder", turning it on ad off, rebooting the iMac, maggic happens and the iPod now shows in iTunes and everything works just fine.
-
HT1351 for syncing it takes long time and not completed what to do???
for syncing it takes long time and not completed what to do???
Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius -
I was upgrading my iOS last night but when I checked to see the progress ,the home page refused to show. After d apple icon comes on the screen immediately changes to show the iTunes icon with a charging port cable. What should I do?
That means that you have to connect your iPad to your computer and you need to use iTunes to restore the iOS. Software. Read this for the instructions.
iTunes: Restoring iOS software - Support - Apple
Maybe you are looking for
-
Hi My screen seems to be very dull and I want to know if/how you adjust his. I'm very new to Apple Macbook's and i am unable to find where to adjust the backlighting on the screen ti make it brighter. Please can anyone advise? Many thanks
-
How can I get my data out of a crashed drive?
I need help. Crashed hard drive. How can I get the data out?
-
Hi We have a application (c code) that currently uses a ISAM file based DB. We want to replace this with Oracle9i. My thoughts would be to create Oracle OBJECTS data types and use the OTT utility to automaticaly create the associated c structs. We co
-
Installation Biztalk Server 2013 and SQL on different machines
I want to know if I can install a Biztalk server 2013 and SQL on different machines?
-
Query all applications that are connected to database in the current time
Dears, I need to query all applications that are connected to database in the current time. I tried using v$session but i could not reach through it to the application that are logged now to database. As example, i connect to DB through Web Applicati