Restarting again and again after boot screen
Hi ,
I am using Lenovo G580 laptop, core i5,4gb ram and 500 GB HDD, my laptop is restarting again and again after it showing lenovo boot screen. can anyone please tell me. what might be the problem??
hi saddamali111,
Welcome to Lenovo Community Forums!
Can you proceed with the following Steps.
Remove the AC adapter and the battery then hold Down the power button for 10sec.
Reconnect the AC and the battery, and turn on the system together with tapping the F2 key.
You should arrive in a BIOS setup page, Hit F9 to load default then press Enter, Now hit F10 to Save and Exit then enter again to confirm.
See if the issue will be same.
If it does, Try hitting F8 When you Power on the system See if it will give you option to load safemode.
also Check if the system will still restart when you turn it on using the NOVO button.
Let me know your findings,
Please share your OS type and version
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
My IPAD keeps restarting a few minutes after booting up. It keeps doing it again and again, after the same period of time. Grateful for any help!
If the above doesn't work, force iPad into Recovery Mode.
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"
I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
Friends... i have been using an iphone 3(4.1/8B117), i jailbroke my iphone and then mistakenly deleted some of the cydia system files after which my iphone started rebooting,and since then its restarting again and again..only the apple logo appears in the black screen and my fone restarts again... guys please help..i'll be glad !!!!
Under the Terms of Use of this forum it is prohibited to discuss jail breaking. By jail breaking your iPhone you void any warranty you may have, forfeit any support from this forum, leave your iPhone vulnerable to malware and risk bricking your iPhone should you attempt future software updates or restoring your iPhone.
-
My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?
Restart the computer and immediately hold the Option key down.
Select the Recovery partition and continue.
On the next pane, select Disk Utility and continue.
When DU opens, select your hard drive in the left column, click the First Aid tab, the click Repair Disk.
When that is done, quit DU and restart in the usual way. -
i've lost my Iphone 4 and found it back. i am unable to restore data. if i connect to itunes its getting restarted again and again. what should I DO ??? TS KEEP ON RESTARTING ALL THE TIME
Hi there balaji007,
You may find the troubleshooting steps in the articles below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. -
HT6146 my apple iphone 3gs 16gb (4.1 version ) is restart again and again in few minutes later
my apple iphone 3gs 16gb version 4.1 is restart in few minutes again and again ............
sorry but i don't no what is problem in this hardware or software...
Plz help me..Hi there Aman Preet Singh,
You may find the troubleshooting steps in the article below helpful.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. -
My Imac doesnt start after de pasword, It continuos asking for it again and again, what can I do to start it?
First, make sure caps lock is not on.
Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combination command-space or command-option-space. See this support article.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, start up in Recovery mode. When the OS X Utilities window appears, select
Utilities ▹ Terminal
from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions. -
I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?Hey, There are afew things you can try.
- Simply turn your phone off and back on again
- Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
- Back up your iPhone to your PC, then restore it..
this ones last cause I think you may have tried it already..
- Close all open applications
Hope this helps!
Kieran. -
What's wrong with my ipad2? I just can't bear it always restart again and again when I just play a simple game! What's wrong with the apple without Jobs?!
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. -
Update to 10.9.1 and restart again and again
Hi, I want to update my MBP 13" 2012, i5 2.6G, 8G to 10.9.1 from 10.9.
When I clicked UPDATE button, it told me I need to restart. After restarting there is a message says I have successfully updated but the system is still 10.9. There is still a message in my App Store. I could click UPDATE and then restart again and again but still can not update tp 10.9.1. Maybe it didn't download the whole package to update?
How could I solve the problem? Could you help me?Welcome to Apple Support Communities
Instead of updating to OS X 10.9.1 from the Apple website, download and install it from the Apple website > http://support.apple.com/kb/DL1707
If it does not work, try the same but after starting up in safe mode (hold the Shift key while your computer is starting up) -
HT201412 my ipdad is restarting again and again
After updating to i-os 8, my I pad is stucking. It is hanging again n again. It is just showing apple symbol. Then i need to restart again and again. sometime it is restarting but sometime i need to try so many times to get it start again. it become too frequent now.
Hi Try a Reboot press hold power button &menu button hold both down until you see Apple Logo If you still have problems Restore to Factory settings over your WiFi. Backup to iCloud first. Cheers Brian
-
IPad 3 searching for network with no sim and restarting again and again
My iPad 3 is searching for network again and again without any sim. I did a full restore, but no avail. In addition to this, it keeps restarting on its own.
After restoring, it is stuck at the intro page because of continuous restarting
Please Help.
Thanks in Advance.Rebooting your iDevice
Hold down the Sleep (On-Off) and Home buttons together for about 10-15 seconds or until the Apple Logo appears - ignore the red slider if it appears - then let go of the buttons. The device should begin to start up. -
I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time. What should i do????????????????????????????????????????????????????????????????????????????? /
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
MSI P45 Neo3-FR - Intel P45 still restarting. Again and again
Hi, i build new PC:
MSI P45 Neo3-FR - Intel P45 PCB 1.0
Core2 duo E7400
Corsair TWIN2X2048-6400C5 DHX - DDR2 800MHz 2GB
KME 400W ATX PZD-400 PFC High Quality
MSI N9800GT-MD512
HDD Barracuda 7200.12 ST3160318AS
After turn on is about 10s everything running and than restart and again and again restarting. I can not even get into the BIOS. The computer is simply not on.
Can someone help me?Quote from: Jack t.N. on 04-August-09, 00:51:38
Test the mainboard outside the case on a non-conducting surface in barebone configuration (one stick of RAM, CPU, video card, power connectors, keyboard). Make sure all power connectors are properly connected: 24-Pin ATX, 4/8-Pin +12V CPU, 6-Pin +12V PCI-Express (video card))
If nothing changes, please try a better PSU.
outside the case with one stick of RAM is working. if i put second ram computer restarting again. It means that problem is in RAM?
Maybe you are looking for
-
How can i buy an App for someone else? (Gift)
So i know how to redeem a gift if i ever got one but how do i buy a gift for someone else? I would like to buy an App for my friend, how can this be done? Thanks in advance.
-
What is the max form size you can distribute in Acrobat 9 Pro?
Hello Everyone, I am using Acrobat 9 Pro to create a survery form that needs to be distributed out to several people. The form basically is a bunch of radio buttons that answer questions. There will be well over 200 radio button groups in the 4 pag
-
How to access my hard drive when the system does not work
how to access my hard drive when the system does not work
-
Problems with installing mac os 9 classic enviroment system folders
im using a G3 10.3.9. Iv inserted the mac os 9 installation cd and started up my mac holding down c and its opened up mac os 9, i then clicked install and about 5mins before completion it tells me: problems were encountered reading the source file "S
-
I coded following to find the AGENT but anyhow its not working.I able to test object T024D with same object key in SWO1 but its not working in my report. types: begin of ty_objectkey1, Plant type WERKS_D, Controller type DISPO, end of ty_objectkey1.