Restarting client copy using STMS
Hi,
Our client copy has terminated because of ORA-1632 ,max extents increase and we would like to restart it at the point of failure. We started the import from STMS in SAP, where is the option to restart the import.
I think in STMS there is no option to restart but if we restart will it take such a long time or will check whether the previous imports have been completed and skip those steps..
Pls help..
Regds,
Satyanarayana N.
U can check import in stms_import tcode
Thanks,
Kalenthirababu.p
Similar Messages
-
Client copy using Client Export... Failed .. Need ur advice
Hi guiys how ru all doin...
I hope some one can help me oout in this issue.iam working on sap
4.6c, windows 2003 server, oracle9.2.0.
we need to take client copy from production client 300 to dev
server using client export method so I have performed client
copy using client export.these are the list of steps which i
performed but still am facing an error.
Checklists /prerequisites before doing client export :
Source client i.e. Client 300 should be locked for all users
except Administrator.
Ensure that NO Users are logged in both NCCSAPPRD and NCCSAPDEV
Server.
Inform Downtime to Users.
At least 2 background work process should be there.
Take Offline Backup of both Production server & Development
server.
Following Jobs rescheduled for next day for Client Export
Process:
1)Collector_for_performance_monitor
2)Customer_evaluati on_information
3)Error reporting
4)Eu_out
5)Vendor_evaluation_information
6)Leave_en titlement
Remove scheduled job from DB:
1)Check opt
2)Analyze tab
Lock all users except administrator
Change database mode from Archive to Non-Archive mode
Logon in NCCSAPPRD in Client 300 the one which is to be Exported
1.Enter Transaction SCC8
2.Select the copy profile and target system NCCSAPDEV Server and
other fields as necessary.
3.Click on "Execute in Background" button.
4.Click on the "Schedule job" button.
5.Verify that all information is correct and click on YES
button.
6.Click on continue at the "Info Client Export" window.
7.Specify the start time and click on SAVE.
8.Specify an output device at the "Background print parameters"
window and click on SAVE.
9.Click on OK at the information window.
Monitor the Client copy using transaction SCC3.
when am going to transaction scc3 in that ->All transport
requests ->Exports -> in that my source client 300 is there when
am double clicking it its showing me list of how many times
client export has been performed in that my date is also there
when iam double clicking it and going to details tab this is wat
the error which its giving....
Log file:
nccsapprd\sapmnt\trans\log\NCPET00968.NCP
Preparation for export
Transport request___: NCPKT00968
System______________: NCP
tp path : tp
Version and Release: 305..15 46D
Execution of the export pre-processing methods for request
NCPKT00968
Start:Sorting and compressing the object list
End:Sorting and compressing the object list
Start:Check for existence of inactive objects
End:Check for existence of inactive objects
End:Check for existence of inactive objects
End:Creating project information
Start:Writing nametab information for key entries
End:Writing nametab information for key entries
Start:Version creation of the objects of the request NCPKT00968
End:Version creation of the objects of the request NCPKT00968
Start:Adjusting the object directory for the objects of the
request NCPKT00968
End:Adapting the object directory for the objects of the request
NCPKT00968
Preparation for export
End date and time : 200708104758
Ended with return code: ===> 0 <===
Mainexport
Transport request___: NCPKT00968
System______________: NCP
tp path : tp
Version and Release: 305..15 46D
SQL error 1652 accessing GLFUNCA: ORA-01652: unable to extend
temp segment by 128 in
SQL error 1652 accessing PPOIX: ORA-01652: unable to extend temp
segment by 128 in
Incorrect export. Request is not imported.
Main export
End date and time : 20070810152923
Ended with return code: ===> 12 <===
This is the error which am getting in the transport log.
I tried to perform 4 times client copy. the first 2 times i got
the same error and the next 2 times it ended with return code
===> 4 <===.
Plzz anyone help me out in this issue as i need to perform it
again and this time i hope with ur help it should be
successful.
Waiting for ur replies
Best regardsThe problem you have is, that your TEMP tablespace is too small on the target system, you need to increase it.
Check Note 3155 - Termination due to tablespace overflow
Markus -
Client copy using SAP_CUST profile
Hi
I have a requirement to copy the Production client (customization only) to Dev-100 customization client (Already existing with customization). Since the production system is having the latest customization settings,my func team wants to copy the production system customization to Dev customization client.
My system config (SAP R/3 4.6C, Oracle 8i, HP UX 11i)
Requirement: PRD 500 --> DEV 100 (Client copy using SAP_CUST)
I have planned the activity as below,
1. Create a backup client in Dev system ... Dev 110 as a copy of Dev100 (Perform a SCCL with SAP_ALL profile of DEV 100)
2. Export SAP_CUST from PRD 500
3. Del Dev100 and import 500 to Dev 100
My doubt is,
1. Whether it is mandatory to delete Dev client 100 before importing PRD client 500?
2. If we import the PRD client in to Dev without deleting, will the data consistency be maintained? ( Profile is SAP_CUST)
3. How long will be the export and import of SAP_CUST will run on an average(Any ways to find the number of tables that get exported when we use SAP_CUST profile?)
4. Any post import activity to be performed after SAP_CUST import?
Please share your experience on this regard. Also, please clarify whether my approach to the requirement is correct or not.
regards,
Vinodh.Hi Vinod,
1. No need to delete client 100 in Dev system. If you copy SAP_CUST profile from PRD system the Production Only customising data will be over written by existing data in DEV.
2.Data cpnsistency will be maintained and you can monitor the entire process using SCC3. Here you can monitor how many table copied and how much % of data copied.
3. As pawan said Please lock all users in DEV system except your user as apreinstallation activity and start client copy. Once you done with that Unlock all users and SGEN to generate nulily created object and to increase system performance.
4. The time take for complition will be depend on you data you are coping.
Before start Client copy follow pre requisites and start.
Follow below link for clarification of your doubts and for pre requisites
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/69/c24c0f4ba111d189750000e8322d00/frameset.htm">http://help.sap.com/saphelp_47x200/helpdata/en/69/c24c0f4ba111d189750000e8322d00/frameset.htm</a>
Regards,
Suraj -
Client Copy Using Client Export/Import
Hi Everyone,
This is regarding Client Copy Using Client Export/Import Method. We have two system Production and Development system. Iam planning to do a client copy from from PRD to DEV. I know most of the steps to perform Client Copy.I have some doubhts So if some one can please help me out i would really appreciate it.
!) I want to know which user should be used to perfrom Client Export ?
2) I want to know know which user to be used to perform Client delete?
3) Is there any particular USER who is recommended to perform Client Copy or any USER can do it?
4) After the Client Delete Procedure thorugh SCC5 ..to get back the client space we do Reorganization ? can anyone plzz tell me what are the tables that i need to reorganize or if anyone can provide me the steps for Reorganization i would be really thankful.
Waiting For your Replies
Best RegardsHi Mohammed,
1)I want to know which user should be used to perfrom Client Export ?
You can use your personal defined on the system UserID.
2) I want to know know which user to be used to perform Client delete?
Same as above, just make sure you have an account on the client and you log on to the right client
3) Is there any particular USER who is recommended to perform Client Copy or any USER can do it?
I am not aware that you should use a particular user. I have been doing copies/deletions with my UserID, as system administrator.
4) After the Client Delete Procedure thorugh SCC5 ..to get back the client space we do Reorganization ? can anyone plzz tell me what are the tables that i need to reorganize or if anyone can provide me the steps for Reorganization i would be really thankful.
Reorganization ( I personally) use SAPDBA tool. However -if you use ORACLE, there are other alternatives as well. What is your DB vendor? I will append more info in a bit.
Rgds,
Loukas -
Dear friends
I have a bunch of requests, need to go for client copy using SCC1,
Using scc1 only once request can be copied, is there anyother way to copy a bunch of request using SCC1/or other tcode at one go
Regards
KiranHi,
you use SCC1 can transport more than one request,
at the field of the "transport request" , you use F4 ,then pop up "select request/task" sub window, then you can selecet your own request, or input several request.
Olivia Yang -
can we perform client export for a local client copy(e.g) in DEv system i need a client 500 .i can perform local client copy from 100 but can i do it through export as both clients are in same system.
Hi,
There is an option for Client TRANSPORT which will help you perhaps:
A client transport differs from a remote client copy in that it does not use RFC. Like a remote client copy, however, a client transport is used to copy data between different R/3 Systems.
A client transport consists of two steps. First, a client export extracts client data from the source client to files at the operating system level. Second, the data is imported from the operating systemfiles into the target client.
To perform a client export, proceed as follows:
Log on to the source client. From the R/3 initial screen, choose:
*Tools *(r) *Administration *(r) *Administration *(r) *Client Admin. *(r) Client Transport(r) Client Export. Select the data to be copied using a profile.
Indicate the target system to which the client will be copied. (The target system must be defined in TMS as part of the transport domain.)
Begin the client export. As copying is a lengthy process, use scheduled background processing. The client export performed in the source system <S-SID>, exports the client data asynchronously bycalling the transport program tp at the operating system level. This export process will generate up to
3 data files at operating system level:
. RT< number >; this file contains client-specific data
. RO< number >; this file contains Cross-client data
. RX< number >; this file contains SAPscript texts
Depending on the type of data selected through the client transport profile, the client copy command
files added to the buffer of the target system are
<S-SID>KO<number>; this file is for cross-client data
<S-SID>KT<number>; this file is for client-specific data
<S-SID>KX<number>; this file is also for client-specific data
The client export change requests are not imported when an Import all takes place. Therefore, you must import these requests into the target client using TMS. You must import the data in the following order: first cross-client data, then client- specific data.
After the import process has completed, post-import activities are required possible for object generation steps. After completing the import, log on to the target client. From the R/3 initial screen, choose:
*Tools *(r) *Administration *(r) *Administration *(r) *Client Admin. *(r) *Client Transport *(r) ImportEditing
To display client transport logs, use the Transport Organizer.During client transport, a Repository consistency check can be performed by clicking the RFC system check button in Transaction SCC8. If inconsistencies are detected, a list of the ABAP Dictionary tables definitions missing in the target system is generated. This will help your recognize in advance formal problems that may occur during the import of the source data.
Reward Points if useful
Regards,
Srinivas -
Client copy COMPUTE_INT_PLUS_OVERFLOW
Hi Gurus,
I have problem with client copy using SCC9, it wont process 4 tables even after active restart. I got ABAP dump, enyone can help resolving issue ?
Regards
SQL2008R2
Runtime Errors COMPUTE_INT_PLUS_OVERFLOW
Exception CX_SY_ARITHMETIC_OVERFLOW
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', was not
caught in
procedure "SCC1_WRITE_FLOW_TABLE" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the current program "SAPLSCC1",
using '+' or 'ADD' to add the values 2147451769 and 73609466 resulted in a
value greater than 2147483647 or smaller than -2147483648. This
leads to a whole number overflow.Here is the right procedure - All explanations are give above .. SAP replied in response to our OSS message . I have added a procedure for more clarity
1. Check the last entry in table CCCFLOW - for the destination client . ( For example MANDT value = 362 when CCopy is run from 100 to 362 client )
2. Make sure the TSTAMP corresponds to the time when the last Client Copy was started .
3. Make Sure NO Client copy is running - Stop / Cancel the Current client . For example if it was run in 10 parallel and 8 have already gotten this dump - the last 2 will also get this dump - so no point in wasting time to let them fail also eventually.
4. Change the value of NBRINS from 2,147,483,469 to 1 in table CCCFLOW for the last entry ( as above )
5. If SE16 is locked for change in the destination client - Do it on DB2 directly - something like this
update sapr3.cccflow set nbrins = 1 where mandt = '362' and tstamp = '20130812213848'
6. Restart the Client Copy and it will work Fine
7. This will result in loss of statistics in the Client Copy output - But when u r copying more than 2 billion lines of data - that is really not important ..
Hope this helps everyone -
Local client copy for delta changes
Hello Support,
We have requirement of copying data(local client copy) of last one month. This is a rrepetitiveactivity and has to be done once in every month.
For example, in DEV we have 3 clients 200, 210 clients. They make changes in 200 client and these changes has to be reflected in 210 clients. For changing 1 month data we can't perform client copy with SAP_ALL.
I have an idea that we can perform local client copy using TDMS 4.0 but can we do delta client copy?
So, my question here is
1. Can we perform client copy for specific selected data(by date, for eg last 30days) without deleting existing data?
2. We have step 'Start Deletion of Data in Receiving System' in Time Based Reduction scenario, can we skip this and continue proceed with client copy?
Thanks,
Uday.Hello Uday,
SAP TDMS Time based reduction package copies the whole of master data and customization data along with the transactional data being filtered based on the Data Slice Date Provided.
SAP TDMS cannot be used for a Delta Copy to copy only a months data keeping the existing data in the system. If the requiremnt is to run every month, you could give an approritate slice date and transfer the whole data again using SAP TDMS which would include the latest one month data as well.
It is not recommended to skip the step "Data deletion in Receiver system" and then execute the SAP TDMS package. This can lead to issue during the transfer.
Regards,
Sreejith Rajashekaran -
Client copy customizing data + master data
while i am performing client copy using SAP_UCUS,SAP_UCSV i used these two profiles but i am not getting master data .Please help me out in this friends.
Hi Sridhar,
SAP_UCUS is the profile which comes with client specific
customizing including auth.profile,the application data is
deleted and user data is retained.
SAP_CUSV is SAP_CUST with variants.
Go through the forum posts you may get more information....Also check the
existence of user master data in your client.Go through the [post|Client Copy for only SAP_CUST erasing master data of target client; .It might help you.
Regards,
Manjula.U -
Regarding client copy and authorizations
hi,
i had installed SAP BW 3.5 on my system.it is a fresh installation.now the probelm is that iam unable to open the administration workbench screen which is the most important of all the BW screens available.when i type the relevant tcode , it is saying "screen cannot be opened on 000 client".so i created one more client 070 (by copying client). and when i log on using 070 client , it is saying you are not authorized to use that screen.
any suggestions?had i missed something in the installation?
regards,
raviHi Ravi,
The procedure to delete is as below.
1. Log on to the client to be deleted.
2. Execute SCC5.
3. Check the delete entry from T000.
4. Schedule in the background.
Since you said you have deleted already , may be you have not checked the delete entry fron table T000.
In this case Go to table T000 and delete the entries.
After that create a client as below.
A local client copy copies between clients within the same R/3 System.
Both a local and remote client copy must be initiated from the target client using the following steps:
1. To create an entry for the target client in the client maintenance table, choose SCC4
2. Log on to the target client as SAP* with the initial password PASS.
3. Perform the client copy using SCCL.
4. Select the data to be copied using a profile.
5. Assign the source client for Customizing data, application data, and user master records.
6. Begin the client copy.
7. As copying is a lengthy process, use background processing.
8. To ensure data consistency, you may not logon to the target client during a client copy.
9. Lock the users in source client.
Regards,
Bapujee naidu -
Which client should be use 000 or 001 for Client Copy
Hi,
Which client we can use 000 or 001 for fresh Client Copy.
Also what is the diff. b/w 000 and 001 client and its uses...
Please suggest.Hi
Always use client 000, except for solution manager systems.
Best regards
550894 - CC-ADMIN: Setting up a new client
Always use client 000 as a template, and never client 001. (A known exception is the SAP Solution Manager.)
Do not copy any application data from client 000 because the consistency of data and the number ranges cannot be guaranteed.
Only client 000 is populated with upgrades, Legal Change Packages, Support Packages, language imports and so on with new Customizing so that it always contains the current sample Customizing. This is why it is also so important that the copy is only carried out after the system is updated. Client 001, on the other hand, is obsolete. It serves only as a sample client and may be deleted at any time. -
Error in Client Copy--Work process restarted
when i am doing a Client copy of the SAP_CUST profile
i am getting the following error.
<b>"work process restarted"</b>
Pls helpHi,
Run it again, but run in background.
Thanks, then keep looking at scc3.
thanks, -
HI SAP Gurus,
Please find the below details:
SAP NetWeaver 7.3
We have to copy all customized or developed BW objects like master data, DSO's , Infocubes , Reports etc.
We need only the design changes but not the data within the DSO or cubes that exist .
We have tried below procedure:
1) Taken export of DE1 source client 400 with profile SAP_CUST
2) Imported transports generated for above export into DE2 target client 350.
3) Executed transaction SCC3 and performed post processing, post processing was successful . Still we are not able to see DSO's, infocubes ,reports.
Please lets us know what we need to do to fulfill our requirement.
Thanks,
Avadhesh
+ 91 8095226536Hi Basis,
Please refer to below documentation on how to perform system copy in BI systems
How to System Copy in SAP Business Intelligence System Landscapes (NW2004)
Post processing steps for SAP BW system copy or db copy
BI systems has mostly cross client objects. So client copy with SAP_CUST profile will not serve your purpose.
Hope this helps.
Regards,
Deepak Kori -
Local client Copy problem using sccl in ECC 6.0- Long time
Hi,
My system ecc6.0 and I am started the client copy form 000 client to 100 client
Now 25 passed but still the copy process not completed .
I am create the client 100 in 000
Then logged into 100
Then start the client copy usuing sccl in background
I am not run the test run
Please check the below logs and suggest.
Regards,
Ravi
Target Client 100
Source Client (incl. Auth.) 000
source Client User Master 000
Copy Type Local Copy
Profile SAP_ALL
Status Processing...
User SAP*
Start on 13.08.2008 / 16:25:57
Last Entry on 13.08.2008 / 17:00:51
Current Action: Post Processing Component
- Last Exit Program /SAPCND/CC_GROUP_WS_NG AP-PRC-CON
Statistics for this Run
- No. of Tables 54569 of 54569
- Deleted Lines 109
- Copied Lines 5101492
Output Sm66 :-
Sort: Server
Server Name No. Type PID Status Reason Sem Start Error CPU Time User Report Action Table
myhost_RD1_00 12 BTC 11391 Running Yes 92662 SAP* SAPLSDNT Sequential Read D010TAB
Client copy from 2008-08-13 16:26:00
System ID............................ RD1
Target client........................ 100
R/3 Release.......................... 700
Basis Support Package...............SAPKB70014
Host................................. myhost
Start in background............. .....X
User................................. SAP*
Parameter
Source client........................ 000
Source client user masters............000
Copier profile:.......................SAP_ALL
Table selection
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Target client 100
Source client 000
User Name SAP*
SAP Release 700
Profile name SAP_ALL
Total number of tables 54.569
Number of Customizing and syst. tables 34.654
Number of application tables 18.185
Number of local tables (to delete) 1.730
Total number of exit programs 14
Number of selection exits 8
Number of generation exits 1
Number of other exit programs 5hello
It is waiting for some post processing.
Please check the
Note 930816 - Cond. Maint. group not generated after remote client copy.
971707 , 1176933
This will help you.
Thanks
Amit -
Steps should be taken to make a client copy say from dev to test using BDLS
Some one help to write up on real situation at any client site...by BASIS group
for SRM box..
Say client num in Dev is 100
and we want to copy all that to a test box where the client number is 101...
initially client 100 SRM box is pointing to R/3 say dev box 201
the new R/3 box is 202. And we have to point the 101 to 202. So I am just wondering the steps
taken by BASIS group to build the test env. 101 ---> 202Hello,
we had experienced some problems during client copy with SRM in our earlier project.
I am not a basis guy but i can give you some hint for yr situation:
- Copy R/3 client 101 to 202 with the profile SAP_ALL
- change the SID with BDLS
- Copy SRM client 100 to 101 with the profile SAP_CUST
- change the SID with BDLS
- Now download the masterdata from R/3 to SRM
SRM client should never be copied with SAP_ALL profile because ,if done so the logical system for product masters is copied that of old client.
This creates total chaos and nothing works.
BR
Dinesh
reward if helps
Maybe you are looking for
-
THE WORST CUSTOMER SUPPORT EXPERIENCE EVER!!!!!
Around 7:30 pm tonight I paid my Verizon bill in FULL!
-
How to see which fields are called from a datasource?
Hy Experts I have the datasource 8ZDS_DS02 and I want to know which fields in R/3 System are 'maped' to the infoobjects. How can I do? Thank you in advance!
-
Checked exceptions design question
Hi, I'm writing an RMI replacement which has similar semantics and I have the following design problem: - A client invokes server.method(myList)- myList is of type List and is actually a Remote object which resides on the client code. So when the ser
-
TS1544 Can I get back the wiped key chain Infomation?
can I get back the set aside wiped original default keychain?Lost all passwords crest etc can no longer run many programmes help??
-
How can I transfer Logic Pro 9 to a new computer. I've already updated to 9.1.8. I began with Logic Pro 8 (complete boxed suite), updated to 9 when it came out. Everything worked great. I bought a new computer and I migrated Logic Pro 9 and when