Restarting Macromedia JRun CFusion Services

In development and prod here (both MX6.1), there is no doc on
what the CFAdmin password is. In dev, I used one of the tutorials
posted in this forum to remove the password.properties file, then
stop the CF services and restart. It worked fine in dev.
However, in production when I look at the list of CF Services
to stop/restart, I don't see what I saw in dev which was
"Coldfusion MX Application Server." I see 3 JRUN services:
Macromedia JRun CFusion, Admin, and Default Server.
Seeing as it's production I'm a little paranoid about
stopping and restarting the services, especially since the service
I affected in dev isn't in prod.
Can I safely stop/restart one, or more than one, of the JRUN
services above? Is it just the JRUN CFusion Server I need to hit?

quote:
Originally posted by:
ke4pym
Macromedia JRun CFusion service is what is installed when you
do a multi-server install. Chances are, your admin setup the
Default Server service for your system and left CFusion alone.
Generally speaking, I set the Admin service to manual and
stop it unless I need access to JRun.
If everything is correct, you should be able to safely stop
those services and restart them.
Great, thanks!

Similar Messages

  • Restart of DSEE 7 service disables other windows service

    Hello,
    I am using DSEE 7.0 ZIP Distribution. I have registered the DSEE 7 as an windows service.
    1) Through Windows service manager when i restart the DSEE 7, restart happening correctly.
    2) When i restart my custom c++ services (used in our project), This custom services should stop & start other 10 services.
    Custom service is able to stop all 10 services. But it could not able to start the services. All the 10 services are moved to the "Disabled" state.
    3) Through Windows service manager when i again restart the DSEE 7, all the 10 services get started automatically.
    Kindly provide me a solution in order to solve this problem
    Regards,
    Srini

    How can I get machine information(win 9x/win NT) and
    the details of service pack installed on the machine
    using java? I have got all the relevant machine
    properties using system class(System.getProperties())
    but could not get service pack details using the
    same. Is there any other way to get all the
    information?Question: this is all Windows-specific stuff. Why in heck do you use Java for that? It's like using pliers to remove a screw. Yes, it may work, but there are no less elegant ways.

  • Problem with macromedia jrun 4

    hi,
    I install a trial version of macromedia jrun 4, when I
    complete the installation and run the jrun management console
    display this error: connection refus from server at localhost:8000.
    why? I have installed Apache ...
    thanks in advance.

    hi,
    management console page not displayed, but display a popup
    with this message : "connection refused during the connection at
    localhost:8000"
    why??
    thanks

  • Auto-restart a stopped system service

    I'm looking for a way to restart a native system service automatically if it ever gets turned off, specifically the screen sharing service. We have a shared Mac Mini running Lion, and sometimes the remote users get click-happy and shut off screen sharing in the middle of the night. I'm not sure if AppleScript or a plist is the way to go, or if there's an alternative solution I don't know about. Any ideas?

    I got this solved this afternoon. In case anyone runs into this problem, the solution used both a plist and AppleScript. The AppleScript checks to see if the process is running and starts it if it isn't. The plist sits under ~\Library\LaunchAgents and calls osascript to run the AppleScript file, with a StartInterval of 60 seconds. Works like a charm.

  • Restarting server without stopping services hyperion

    Hi all
    You can corrupt the tool hyperion 11.1.2 or aplicaciaones are credas, if the servers are restarted without stopping hyperion services?
    Please your help
    Regards
    Pedro

    Hi John,
    Therefore, it is safe to restart the server without the need to lower 11.1.2.x Hyperion services?
    Not considered a bad practice?
    Thank you very much for your answer

  • Restart every 24 hours Services Option

    Hi,
    If the "restart services every 24 hours" option is enabled, does that mean that the services are restarted 24 hours from when they were initally started? Strangely It seems like we lose our cluster config right around 12 midnight. And I also see this in the logs:
    <mrk tms="216710840.582" tmt="11/14/2007 00:27:20.582" pid="574" kind="begin" what="log-session"/>
    <log tms="216710840.583" tmt="11/14/2007 00:27:20.583" pid="574" msg="Starting up"/>
    <log tms="216710840.629" tmt="11/14/2007 00:27:20.629" pid="574" msg="Scheduling restart timer in 84759 sec."/>
    any confirmation on this?
    thanks.

    Hello,
    Your logs are correct. It restarts at midnight each night. You have no control over this in the interface (kind of stupid if you ask me).
    If you want to restart at specified times, you can set up a crontab under the administrator account to do this.
    ### every Tuesday between 3:40PM and 3:50PM restart Compressor
    40 15 * * 2 /usr/sbin/qmasterprefs -service "Compressor Processing" off timeout 8
    50 15 * * 2 /usr/sbin/qmasterprefs -service "Compressor Processing" on
    This example is for a node. It's best not to automatically restart the cluster controller this way unless you're sure it won't have any jobs in the queue and you check it afterward.
    Qmaster clusters are delicate things -- more so than teenage daughters.
    Depending on your version of qmaster, you can read page 21 of the docs located here:
    http://manuals.info.apple.com/en/AppleQmaster_2_UserManual.pdf
    Hope this helps & as always with qmaster, good luck.

  • How to restart Seeburger x.400 service

    Hello guys,
    actually i knew how to restart the service but now i am not able to find it anymore.
    We have an external adapter engine and think that the messages are not send because adapter might be down on seeburger machine.
    Could you give me a hand on this where to find and restart the X.400 adapter-service in the BIS-fornt end?
    br

    self-soveld

  • Is there a way to restart my Java cloud service? What are "non-dynamic configuration changes"?

    I am trying to deploy an ADF application to my trial instance of Java cloud, I am getting the following error:
    2013-10-15 08:24:18 CDT: Deploy Application started
    2013-10-15 08:24:19 CDT: weblogic.management.DeploymentException: [Deployer:149189]An attempt was made to execute the 'deploy' operation on an application named 'xyzAPP' that is not currently available. The application may have been created after non-dynamic configuration changes were activated. If so, the operation can not be performed until server is restarted so that the application will be available.
    2013-10-15 08:24:19 CDT: WL action state: failed
    2013-10-15 08:24:19 CDT: Action FAILED with WL action state: failed
    2013-10-15 08:24:19 CDT: Check the server log of your Java cloud service for more info about the failure.
    There are tutorials available for deploying your first ADF app to the cloud, which I followed carefully. Except for one thing, the ADF app was originally developed in Jdeveloper 11.1.2.4 and then migrated to 11.1.1.6. Could that be what is causing the problem? How can I try to troubleshoot this?

    Hi,
    You will have to raise an sr towards the hosting team to perform the restart.
    Kind regards,
    Flori

  • It is possible to speed up the 31410 (datawarehouse event) after restarted all the SCOM services for SCOM 2007R2

    Hi,
    Everytime, we restarted the SCOM services. It will took 50mins++ until event id 31410 is out then SCOM application will only start to pumping out alerts. anyway to speed it up?

    Hi,
    When you restart the SCOM services, please also try to restart Microsoft Monitoring Agent.
    @echo off
    echo Restarting System Center Management Configuration…
    net stop cshost
    net start cshost
    echo Restarting HealthService…
    net stop HealthService
    net start HealthService
    echo done!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • TS4429 9 months 6 replacements and still the no service problem. Only a restart will bring the service back.I have tried all the suggestion to fix this but it is still happening. Please Help

    I have had 6 replacement Iphone 4s and still my issue has not been resolved. What more must I do to have a telephone that can receive phone calls without me having to check it every 20 mins to make sure I have network service. Renewing the simcard has also not worked.

    I was thinking that Kabel Deutschland might be the problem but my wife has a Iphone 3GS on the same network and she never has the no service problem. Also when I said I have had 6 replacements yes they all had at one time or another this issue with no service but they had other issues like not switching off or bright spots on the screen etc etc. Also the sim card has been replaced twice

  • What is the affect of restarting the DFS Namespace Service? (Will users be affected if it is restarted on all DFS servers?)

    Please advise..
    Thank You

    When clients get a DFS referral, it will be stored in cache for a while for saving network cost. The default time-out is 1800 seconds.
    DFS has failover if more than one namespace server is added. However if all namespace servers are restarting in the same time, users will fail to find a namespace server so they will not able to get a folder target if there is no cache stored on client side.
    If you have any feedback on our support, please send to [email protected]

  • Macromedia JRUN

    I'd like to know how to configure NitroX to run with jrun and debug JSP's
    Thanks

    We do not support JRun server, please refer to http://www.m7.com/platforms.do for complete list of supported platforms.

  • Just upgraded to ios7.1 and after restart, i lost phone service.  Help?

    So I just upgraded to ios7.1 and then I lost phone service.  I've re-started several times and restored my phone from most recent backup and still no service.

    my phone is doing this as well...frustrating...

  • HT1386 I recently got a new laptop and a with that a new iTunes library but my IPhone is still connected to my old laptop and will not sync with my new library i have downloaded the latest ITunes and restarted the apple mobile service device

    My new itunes will not recgonise my Iphone but the laptop will as it charges when i plug it in

    good advice in this thread:
    https://discussions.apple.com/thread/3768724?start=0&tstart=0
    also look to the right for more answers------------------------------->

  • Unable to restart Siebel Analtyics Server Services

    I have Checked the Config file and the parameters are correct.But Still not able to start.

    See if u r RPD is consistent and error free, check for any additional characters in front of the # somewhere....

Maybe you are looking for

  • HP Laserjet 1020 is not recognized by Airport Extreme(2nd gen)

    Per instructions on the manual, I hooked up my HP Laserjet 1020 to the USB port on the Extreme, hoping to use it as a network printer for 4 computers.  It does not show up on the printer list and everything I have tried, including updating drivers an

  • How can I get a word count in iCloud Pages Beta?

    Apparently there is no way to get a document word count in iCloud Pages Beta.  Has anyone figured out a work around for this?

  • Job to cancel errored out SA processes

    We have a BPM which opens a Sync/Async bridge. We are getting quite a few timeout errors in the IP. Could someone point me to the job to cancel the processes so that they dont sit around and accumulate ? Thanks Sridhar

  • Is anyone using Adobe Presenter 10 with PowerPoint 2013?

    I was online with the chat support who was trying to help me solve my Adobe Presenter 10 addin in problem with Powerpoint 2013.  He had me remove the software.  When I went to reinstall, the browser logged me off the chat.   When I went back in, they

  • How do I launch AppleScript Utility

    Hello, I am working my way through the AppleScript 1-2-3 book by Soghoian and Cheeseman. Chapter 14 is on the topic AppleScript Utility and says in order to open the AppleScript Utility I can either find it in the AppleScript Folder in Applications o