Restarting process in BPM

Hi guys,
if I have a BPM process and it fails for some reason (let's say mapping), is it possible to restart it from the point where it failed? I mean, if there is such an option, or the pocess has to be cancelled and started again from the beginning with new message?
Is there any report which may resume errored process after corecting the error?
Thanks

Hi,
You can use transactions SXMB_MONI_BPE -->Continue Process Following Error
Or t codes - SWF_XI_SWPR or SWF_XI_SWI2_DIAG
Hope this helps.
Regards,
Deepak

Similar Messages

BPM-70830 while deploying process in BPM Composer

Hi,
I got these errors When I try to deploy a bpm project which created and developed in BPM Composer(11.1.1.6.0). Can anyone help me? Thanks a lot!
There're already 34 processes successfully deployed with BPM Composer before this error occur, however, I can not deployed any new process with BPM Composer now.
=== DeploymentResult ====================================================
Type: VALIDATION
MSG: BPM-70830: Deployment validation failed. Cause: An unexpected error has occurred during deployment validation
1.- Fault severity: ERROR should fail: true
java.lang.NullPointerException
=== DeploymentResult End ================================================
[2012-05-03T00:06:54.355+08:00] [soa_server1] [NOTIFICATION] [] [oracle.bpm.composer.beans.toolbar.SarExportDialogBean] [tid: [ACTIVE].ExecuteThread: '1' for
queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 11d1def534ea1be0:34621b1:1370e472584:-8000-0000000000000320,0] [APP: BPMComposer]
SEVERITY: ERROR
[2012-05-03T00:06:54.355+08:00] [soa_server1] [ERROR] [] [oracle.bpm.composer.beans.toolbar.SarExportDialogBean] [tid: [ACTIVE].ExecuteThread: '1' for queue:
'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 11d1def534ea1be0:34621b1:1370e472584:-8000-0000000000000320,0] [APP: BPMComposer] [[
java.lang.NullPointerException
     at oracle.soa.scac.ValidateComposite.checkInterfaceInWsdlManager(ValidateComposite.java:388)
     at oracle.soa.scac.ValidateComposite.validateComponentTypeReferences(ValidateComposite.java:980)
     at oracle.soa.scac.ValidateComposite.validateComponentTypeServicesReferences(ValidateComposite.java:1012)
     at oracle.soa.scac.ValidateComposite.doValidation0(ValidateComposite.java:502)
     at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:481)
     at oracle.bpm.deployment.impl.ScacDeploymentService.validateProject(ScacDeploymentService.java:223)
     at oracle.bpm.deployment.impl.ScacDeploymentService.generateSarFile(ScacDeploymentService.java:85)
     at oracle.bpm.pml.service.impl.ComposerMetadataServiceImpl.generateSarFile(ComposerMetadataServiceImpl.java:369)
     at oracle.bpm.composer.service.ProjectDeploymentService.generateSarFile(ProjectDeploymentService.java:288)
     at oracle.bpm.composer.beans.toolbar.SarExportDialogBean.generateSarFile(SarExportDialogBean.java:563)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
     at java.lang.reflect.Method.invoke(Method.java:611)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:187)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297)
     at org.apache.myfaces.trinidadinternal.taglib.listener.FileDownloadActionListener.processAction(FileDownloadActionListener.java:121)
     at oracle.adfinternal.view.faces.event.rich.FileDownloadActionListener.processAction(FileDownloadActionListener.java:77)
     at javax.faces.event.ActionEvent.processListener(ActionEvent.java:88)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcast(UIXComponentBase.java:675)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:179)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1018)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:386)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bpm.web.security.filter.SessionTimeoutFilter.doFilter(SessionTimeoutFilter.java:56)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bpm.composer.filter.MdsInitializationFilter.doFilter(MdsInitializationFilter.java:54)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:291)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bpm.composer.filter.OpenedProjectCheckFilter.doFilter(OpenedProjectCheckFilter.java:53)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.bpm.composer.filter.UrlHandlerFilter.doFilter(UrlHandlerFilter.java:40)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.caching.filter.AdfFacesCachingFilter.doFilter(AdfFacesCachingFilter.java:137)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(AccessController.java:284)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(AccessController.java:284)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(AccessController.java:284)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Wishes
Eleven Xu
Edited by: Eleven.Xu on 2012-5-2 上午9:52

You're right, I restarted the server again and again...
I have just opened the sr in metalink, it has been confirmed as a bug. Unfortunately there's no way to workaround. What I can do now is waiting for the solution.

How to restart the stuck BPM ( started state)

Hi XI experts,
We need to restart the stuck BPM in XI. Please advise how to do this..
Thanks in advance.

Hi Mohan,
You can directly restart the process by this transaction
SWF_XI_SWPR
Check the url
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/692b2cb6a93673e10000000a114a6b/content.htm
if you dont click continue immediately, just execute the transaction and see the BPM. there is a option of Restart workflow
Regards
Suraj

BPEL Process in BPM Studio

Hello,
First, are there any examples, tutorials, or documentation on how to create and run a BPEL process within BPM Studio (5.7) ?
I've gotten quite a ways by trial and error, but am having trouble running / testing out the process.
I've tried doing a Process->Generate Process Interface and Process->Run but nothing happens in BPM Studio when these are performed. What else do i need to do to test out my BPEL process with external webservice ?
Here's the steps i've taken so far.
1. Developed a simple external webservice with netbeans (JAX-WS).
2. Generated WSDL and XSD with wsgen executable.
3. Developed WSDL & XSD for BPEL Process request & reply.
4. Created a new project within BPM Studio.
5. Created a new module under "Catalog" for wsdl introspection.
6. Cataloged webservice component with local wsdl/xsd files.
7. Configured the Server configuration generated under the "External Resources" to point to the webservice host.
8. Configured the web service under "External Resources" to point to the webservice endpoint on the host (Server configuration)
9. Created a new BPEL Process.
10. Created new Instance variables for the process input and output as "component" type that point to the introspected request & response types.
11. Assigned the port type & method of the BPEL Receive to the introspected service defined in #3.
12. Assinged the input variable to the request variable created in #10.
13. Assigned port type & method & output variable to the BPEL reply.
14. Created a BPEL Invoke node between Request & Reply.
15. Assigned port type & method on the Invoke node to instrospected web service defined in #2.
16. Created instance variables for input & output of invoke node based on introspected request & reply
17. Assigned input & output.
Once all of this was complete, doing a Process->Check Design yeilded no errors or warnings.
Thanks for any help,
Chris

Hello,
First, are there any examples, tutorials, or documentation on how to create and run a BPEL process within BPM Studio (5.7) ?
I've gotten quite a ways by trial and error, but am having trouble running / testing out the process.
I've tried doing a Process->Generate Process Interface and Process->Run but nothing happens in BPM Studio when these are performed. What else do i need to do to test out my BPEL process with external webservice ?
Here's the steps i've taken so far.
1. Developed a simple external webservice with netbeans (JAX-WS).
2. Generated WSDL and XSD with wsgen executable.
3. Developed WSDL & XSD for BPEL Process request & reply.
4. Created a new project within BPM Studio.
5. Created a new module under "Catalog" for wsdl introspection.
6. Cataloged webservice component with local wsdl/xsd files.
7. Configured the Server configuration generated under the "External Resources" to point to the webservice host.
8. Configured the web service under "External Resources" to point to the webservice endpoint on the host (Server configuration)
9. Created a new BPEL Process.
10. Created new Instance variables for the process input and output as "component" type that point to the introspected request & response types.
11. Assigned the port type & method of the BPEL Receive to the introspected service defined in #3.
12. Assinged the input variable to the request variable created in #10.
13. Assigned port type & method & output variable to the BPEL reply.
14. Created a BPEL Invoke node between Request & Reply.
15. Assigned port type & method on the Invoke node to instrospected web service defined in #2.
16. Created instance variables for input & output of invoke node based on introspected request & reply
17. Assigned input & output.
Once all of this was complete, doing a Process->Check Design yeilded no errors or warnings.
Thanks for any help,
Chris

How to kill an instance process in BPM studio 6.0

Hi i'm Fabio.
I'm working on BPM Studio 6.0 and i need to complete a task.
I have an instance id process, and i need to create a new process in order to kill this istance id.
I read how to create a PAPI client (http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/papi/index.html?t=modules/papi/c_Writing_Your_First_Java_PAPI_Program.html) but it doesn't work for my purpose.
First of all, i understood that i have to follow these step:
* Import the required libraries.
* Create a process service.
* Create a process service session.
* Perform operations with PAPI.
* Close the process service.
Now, i'm working on my xpdl file and i'm using the Standard Module "Fuego" and my plan is to create a process servcie, a process service session and then operate with PAPI.
But using the PAPI module include in the BPM studio 6.0 i'm no able to load the library for the session import fuego.papi.ProcessServiceSession;
so i'm worng something. Could you tell me how can menage this problem? Really do i need a session? Is possible to abort an istance process in BPM studio or i need to load my ear project in Enterprise environment and then kill my instance process? Thanks, regards Fabio.

Thanks Dan, i read your suggestion but my boss was to implement a different solution:
package hp.abort.process;
import fuego.boot.*;
import fuego.papi.CommunicationException;
import fuego.papi.InstanceInfo;
import fuego.papi.InstanceId;
import fuego.papi.ProcessService;
import fuego.papi.ProcessServiceSession;
import fuego.papi.OperationException;
import java.util.Properties;
import javax.transaction.*;
import java.lang.Exception;
public class AbortProcess {
public static void main(String[] args) {
/////////////////// API Initialization ///////////////////
Properties configuration = new Properties();
configuration.setProperty(ProcessService.DIRECTORY_ID, "default");
configuration.setProperty(ProcessService.PROJECT_PATH, "C:/Documents and Settings/Administrator/AlbpmWorkspace/EarOMatic");
configuration.setProperty(ProcessService.WORKING_FOLDER, "C:/tmp");
try {
ProcessService processService = ProcessService.create(configuration);
/////////////////// Establish a session ///////////////////
ProcessServiceSession session = processService.createSession("adminEarOMatic", "adminEarOMatic", "localhost");
/////////////////// Operate with PAPI ///////////////////
for (String processId : session.processesGetIds()) {
System.out.println("\n Process: " + processId);
for (InstanceInfo instance : session.processGetInstances(processId) ) {
System.out.println(" -> " + instance.getId());
System.out.println("ActivityName -> " + instance.getActivityName());
System.out.println("ActivityId -> "+ instance.getActivityId());
//Problema: nn vuole ActivityId ma Process Id
session.activityAbort("/CreateEurekaSRService#Default-1.0/eomWait","/CreateEurekaSRService#Default-1.0/1/0@EarOMatic");
/////////////////// Close the session ///////////////////
session.close();
/////////////////// Release API Resources ///////////////////
processService.close();
} catch (CommunicationException e) {
System.out.println("Could not connect to Directory Service");
e.printStackTrace();
} catch (OperationException e) {
System.out.println("Could not perform the requested operation");
e.printStackTrace();
Now, i got the following exception:
Local folder C:/tmp\system\Schema-4154784351820594721\catalogs found.
Loading catalogs from local folder: C:/tmp\system\Schema-4154784351820594721\catalogs
0 jars found locally.
[CatalogMgrCache] =======================
Registering CatalogMgr [EarOMatic] ...CatalogManagerCache 10390580:
Managers:
Counters:
[CatalogMgrCache] =======================
CatalogMgr [EarOMatic] REGISTERED!CatalogManagerCache 10390580:
Managers:
{EarOMatic=fuego.util.LocalCatalogManager@106df95}
Counters:
Process: /AbortInstanceProcessService#Default-1.0
Unreachable Engine Tolerance (seconds):
by default: 0
to be used: 0
This papi client will not cache exceptions which imply that an engine could not be reached.
Changing InstanceCache Entry[processId=/AbortInstanceProcessService#Default-1.0, state=0] to 3
Changing InstanceCache Entry[processId=/AbortInstanceProcessService#Default-1.0, state=3] to 2
Process: /CreateEurekaSRService#Default-1.0
Changing InstanceCache Entry[processId=/CreateEurekaSRService#Default-1.0, state=0] to 3
Changing InstanceCache Entry[processId=/CreateEurekaSRService#Default-1.0, state=3] to 2
-> /CreateEurekaSRService#Default-1.0/1/0
ActivityName -> eomWait
Adding local catalog for project: 1
ActivityId -> /CreateEurekaSRService#Default-1.0/eomWait
Exception in thread "main" fuego.server.exception.InvalidIdRuntimeException: Invalid identification.
Detail:Invalid identification (Identification value: /CreateEurekaSRService#Default-1.0/eomWait)
     at fuego.server.ActiveProcessImpl.getActivity(ActiveProcessImpl.java:632)
     at fuego.server.execution.microactivity.AbstractProcessExecutionHandler.getExecutableActivity(AbstractProcessExecutionHandler.java:58)
     at fuego.server.AbstractProcessBean.abortActivity(AbstractProcessBean.java:3262)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
     at fuego.component.Message.process(Message.java:587)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:778)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:753)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:248)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:837)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
     at fuego.component.CustomExecution.next(CustomExecution.java:172)
     at fuego.component.ExecutorClient.invoke(ExecutorClient.java:118)
     at fuego.papi.impl.rmi.ProcessControlProxy.abortActivity(ProcessControlProxy.java:407)
     at fuego.papi.impl.rmi.ProcessControlProxyWrapper.abortActivity(ProcessControlProxyWrapper.java:683)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at fuego.papi.impl.AbstractProcessControlHandler.invokeInternal(AbstractProcessControlHandler.java:72)
     at fuego.papi.impl.rmi.RMIProcessControlHandler.invoke(RMIProcessControlHandler.java:165)
     at $Proxy23.abortActivity(Unknown Source)
     at fuego.papi.impl.ProcessInstanceOperation.abortActivity(ProcessInstanceOperation.java:726)
     at fuego.papi.impl.ProcessServiceSessionImpl.activityAbort(ProcessServiceSessionImpl.java:184)
     at hp.abort.process.AbortProcess.main(AbortProcess.java:45)
Caused by: fuego.metadata.exception.InvalidIdException: Activity '/CreateEurekaSRService#Default-1.0/eomWait' was not found in process '/CreateEurekaSRService#Default-1.0'.
     at fuego.metadata.Process.getActivity(Process.java:261)
     at fuego.server.ActiveProcessImpl.getActivity(ActiveProcessImpl.java:629)
     at fuego.server.execution.microactivity.AbstractProcessExecutionHandler.getExecutableActivity(AbstractProcessExecutionHandler.java:58)
     at fuego.server.AbstractProcessBean.abortActivity(AbstractProcessBean.java:3262)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
     at fuego.component.Message.process(Message.java:587)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:778)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:753)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:248)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:837)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
I understood that tha activity id's format is not valid, but i obtained it just using the following function: instance.getActivityId()
Are you abel to give me some suggestion? Is it good this method to kill instance?
Thanks a lot, regard Fabio.

Bussiness Process, Integration Process, cc-BPM, BPM

Hello Everybody!!! Please help me!
1) In XI, Business Process = Integration Process = cc-BPM = BPM ??? Are these four the same thing?
2) Please tell me if I'm wrong: we have two types of message exchange in XI, stateless (through simple message exchange) and (ii) statefull (with BPM). There is no other type, ok?
thank you
Julio

Hi Julio,
This is an excerpt from one of the posts:-
BPM- Business Process Management- in XI BPM and ccBPM interchangeably used. for more on BPM- as an SAP standpoint or Business Process level - -/people/thomas.volmering/blog/2005/09/21/welcome-to-the-new-bpm-corner
ccBPM- Cross Component BPM -
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/archive-xi_ppts_internal_etc/sap%20netweaver%20rig%20webinar%20-%20cross-component%20business%20process%20management%20with%20xi%203.0.pdf
http://help.sap.com/saphelp_nw2004s/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
Hope this helps.
Regards.
Praveen

How to start a new process in BPM

There are many ways to start a new process in BPM.However I was wondering whether there is any specific way to kick off an instance in the process with the help of PAPI from external systems.I would be thankful if someone could advise.

Check the PAPI Javadoc & Samples in the [enterprise_install_dir]/client/papi/ directory.
Basically, you must:
a) create a Process Service object
service = ProcessService.create(properties);
b) create a PAPI session with a participant
session = service.createSession(user, pass, "localhost");
c) create an instance:
instance = session.createProcessInstance("/Orders", "BeginIn", arguments);
d) destroy the session
session.close();
Hope this helps!
Fernando

How to create automatic timer process in BPM?

Can anyone tell me how to create an automatic timer process in BPM?
Can I just create an manual process, and drag the timer event into the swam lane, can connect the timer to the service and then to the end event?
Thank you

Hi,
You can make use of Global Automatic activity to kick off your process at a particular time. Place a Global Automatic activity in your process and right click on the Global Automatic activity and select Properties --> General --> Global Automatic Type: Automatic Schedule, Automatic Schedule: <Configure with your requirement>.
Else you can make use of due transition/timer activity to get your task done.
Bibhu

Human interaction process using BPM

Hi Experts,
Is it possible to create Human interaction process using BPM?
Regards
Sara

An insurance analyst has access only access to the backend, not to XI. So send the message to the backend, start a workflow here and send a message back.
You can use ABAP proxy to implement this.
In PI 7.1 there will be human interaction in BPM, but this requires a user in the PI system and is useful only for administrators, as there are no application data in PI which enables the user to decide, whether he should approve or reject the request.
In PI 3.0/7.0 there is no user interaction in BPM.
Regards
Stefan

Migration of GP process to BPM

Hi,
Can we migrate our GP process to BPM ? Do we have any migration tool available? If yes then how and if no then do we have to re-modell our whole process in BPM?
Regards,
Pratik

Hi Pratik,
unfortunately, there is no migration tool to autmatically convert GP processes to SAP NetWeaver BPM.
You will have to re-model them with SAP NetWeaver BPM manually.
Best regards,
Oliver

How to get the assignees for a specific role in process in BPM 11g

Hi, Gurus,
I am using BPM 11g. I am trying to retrieve all the assignees for a a specific role in process. It will be a parameter for a business rule to do further routing rule. But it seems there is no way to get the information. I found that there are Identity Service Functions in Human Task Assignment. But Identity Service Functions are not listed in Business Rule Activity, neither listed in other activities except Human Task Assignment. I cannot get the assignees in my process.
Is there any way to get all the assignees for a role? I also tried to retrieve the assignees out engine with Worklist API, but it cannot get either. Actually we can get all the assignees information in automatic activity in OBPM 10g. Maybe I am still not familiar with 11g. Any advice is appreciated.
FYI:
My scenario:
Suppose we have a role named ApprovalTeam. In this role, there will be several different department manager (BPM User) added in the role through Workspace. At run time, a request (With department info) with go through the approval by ApprovalTeam. A Business Rule Activity with decide which department manager will approve this request. Different department request will be dispatched dedicate managers, not all the managers in the role. I have an external JavaBean to get the department information from LDAP. To do the routing, I also need know all the department managers (BPM User) in the ApprovalTeam role. Then I can compare which department manager is matched with the request and assign the task to him.
Thanks a lot,
James
Edited by: James Piao on May 31, 2010 6:25 PM

or this?
SQL> select text from ALL_VIEWS
2 where VIEW_NAME
3 ='EMP_VIEW';
TEXT
SELECT empno,ename FROM EMP
WHERE empno=10

How to trigger Sequence of processes in BPM

Hi! I am trying to implement process sequencing with BPM.Its like i have to trigger a set of processes(say 1,2 &3 ) if certain flag in input msg is set.If the flag is not set then processes (1,2&4 ).
      the procecess should occur in a sequence like ..if 1 is completed then it should send ackgmnt and start the 2nd process.
If any body has worked on similar scenario , please reply :).
Srinivas
Edited by: Srinivas Subramanyam Karnam on Jul 4, 2008 2:16 PM

I tried using switch control to check the condition (particular element(say JV) in the input msg is 0or 1 ) .But donno how to get ack and based on ack how to start other process.
             Let me take an example to make things clear.
say 1st process is creation of batch No.
       2nd -
do -
of sales order.
       3rd -
do----
of STO.
       4th -
do----
of SOD(SO dispatch).
If JV element in input msg is 1 ...flow should be like(1->2->4)
create BatchNo-> get ack->
if ack positive(:if ack Negative->end.)->create SO
->get ack->if ack positive(:if ack Negative->end.)->create SOD.End.
If JV =0 say...then similarly 1->2->3 end.
Not sure if i have to use while loop .. new to bpm :).Request to Reply with what controls to be used .
with due thanks srinivas.:)

Business process management (BPM)

How do business process mangement implmentation related to SAP BASIS guys.

Hi,
If you are talking about Solution manager BPM(Business Process Monitoring), its upto you how much you can relate, generally we used to do configuration on based upon inputs from fuctional consultants, so in case you dont have any solution mnaager consultant , you can collect the busness scenario related information and map the business process in solman setup , finally need to configre monitring based on scopes.Maximum input should come from business users to map.
Hope it will clear ,
Regards,

Permanent error in BPE inbound processing for BPM Mesg Split

Hi Friends,
i have done the below scenario. i had done everything what theys mentioned in the blog but i am getting the error in smq2 as "Permanent error in BPE inbound processing" sysfail please helpme on this issue.
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure

Hi Uday,
Please check this blog for your error, This is really interesting. Permanent solution for your question.
Delivery Modes in BPM.
Thanks!

Queries on Business Process Monitoring (BPM) & Interface Monitoring

Dear all,
I have got a few queries on the subject and would greatly appreciate any valuable inputs.
Before I proceed, want to clarify that I have downloaded all overtly available documents (PDFs, SIMs) from the following URLs:
http://service.sap.com/rkt-solman
http://service.sap.com/solutionmanager Media Library
http://service.sap.com/bpm Media Library
I may not have read them all though since I come from a Functional angle.
Kindly reply to whatever query you can please. Not all of them are sequential.
Queries:
(1) How are Interfaces with External Systems (beyond the firewall of the enterprise) monitored ?
(2) Is it really worth listing all such External Systems as Logical Components in their own right ? I guess this makes sense if at a Process Step level, one wants to list a 'specific' Logical Component involved instead of 'generic' term like External System. However, it would benefit only if Interface Monitoring is feasible; isn't it ?
(3) There are Interfaces which are built between SAP and External System and serve various Business Processes under various Business Scenarios. In such circumstances, it is not easy to list which Process 'owns' the Interface. Therefore, under a normal Implementation Project structure (SOLAR02), choosing a particular Process Step, getting into 'Development' Tab and listing the Interface Program name may not be feasible, since there is no particular place where it belongs.
Is it therefore a good idea to create namesake Scenario for capturing all interfaces and list a library of all interfaces and store documents right there ? If so, will these namesake processes be of any use in BPM at a later date ?
(4) If my primary objective is to accomplish Interface Monitoring and not Business Process Monitoring per se, is it a good idea to create a new Solution Landscape, and manually create Business Processes that are suited to list Interfaces than to assign Template or Implementation Project to the Solution Landscape, and inherit those Processes ?
(5) What is it that a SAP Competence (Support) Centre will find as a 'major' gain in activating BPM to monitor Interfaces alone - is there something that SolMan's BPM based Interface Monitoring gives more than what PI level reporting may provide them with ?
(6) In Interfaces with Non-SAP Systems (some of them are old/ proprietary legacy systems with Credit Card companies; some of them are like 'Active Directory' servers), is it possible to define Metrics for BPM that such systems will contribute to SolMan, for reporting purposes ? Or, is it too much to hope for
Thanks again, for your patience and advance thanks for your kind responses.
Srini
Bes

Hi,
Welcome to BPM
You have asked too many questions in a single Post, Please read rules of engagement before posting
You can monitor the following without any trouble.
● ALE/EDI
● qRFC
1) Its obvious, if your firewall blocks all your request to external enterprise, it is not possible to monitor.
3) These interfaces are not the one related to development tab in SOLAR02, you have to map them from BPM.
4) Yes, you don't have to depend on any project for your processes, you can add it in your Solution Landscape.
5) Post a Separate Thread!!!
6) Post a Separate Thread!!!
Hope this gives a better idea.
Feel free to revert back.
--Ragu

Restarting process in BPM

Similar Messages

Maybe you are looking for