Restarting slideshow from beginning

I just bought a DPF-VR100. When it is turned off then on, it seems to restart the slideshow wherever it stopped last time. I want it to start from the beginning each time. How do I do that? I couldn't find that setting or any instructions in the manual. I have the photos and music in memory. The photos are ordered in the index the way I want them to appear.
Thanks!
Solved!
Go to Solution.

Hello, and welcome to the forums.
This is normal operation. If you turn the photo frame off during slide-show and back on, the slide-show restarts from the last image viewed. Unfortunately there is no setting for the slide-show to automatically restart after next power on.

Similar Messages

  • Restarting project from beginning after failing quiz

    I have set up an exam at the end of my Captivate 7 project, but I am having trouble getting the performance that I need. I was hoping someone could give me some insight into achieving the performance I want.
    I have been able to achieve the following:
    -I am allowing the user 3 attempts to pass the quiz
    -If they pass any of the attempts, the course is considered complete (and/or passed)
    However, I have not been successful at getting this outcome:
    If the user fails all 3 attempts, I need the course to be considered complete but failed
    Our requirement is that if the user fails the quiz all 3 times, then they must retake the entire course. What I have experienced is that when the user exits after failing, when they try to retake the course, it will take them to the last bookmarked location of the current attempt (in my case, the page after the quiz results slide that lets the user know they failed). It is considering the course Incomplete (and therefore bookmarking to the end) rather than considering it Complete and Failed (and allowing them to repeat the course from a fresh start).
    I have tried the following preferences with no luck:
    Complete, Success/Completion Criteria: Slide views and/or quiz, with Quiz is passed or the quiz attempt limit is reached. This resulted in the user getting a "complete" status and certificate for the course, even if they failed all 3 times.
    Passed/Failed, Success/Completion Criteria: Quiz is passed. This results in the course getting stuck in an Incomplete state after failure. When they exit they don't have the option to retake from the beginning and keep getting bookmarked to the last slide of the project.
    Any ideas on how I can set the preferences? I was considering using the Project End Option of Looping the project, but I'm not sure how this will perform. Or maybe I need to use JavaScript to force this? We use SCORM 1.2 / Meridian LMS.
    Thanks for considering,
    Holly

    Thanks Rod!
    Your comments were very helpful. I think your advice on avoiding using Javascript to force the issue was a great tip.
    Just as a follow up, I wanted to let you know what my team and I came up with upon further brainstorming. We ended up using some navigation and advanced actions to reset the course internally, without having to involve or upgrade the SCORM.
    Here's the solution we are going with:
    We allow the user infinite attempts at the exam (under preferences), but are using advanced actions to reset the course if the user fails three times in a row.
    From the exam results page, when the user clicks the Continue button, the slide just after the results page has a conditional action that executes On Enter of the page. The action has 3 types of decisions - what happens if they pass, what happens if they fail, and what happens if they fail on an attempt that is a multiple of 3.
    If the user passes the exam (if the variable cpQuizInfoTotalCorrectAnswers is greater or equal to 4), then it jumps them to a page letting them know they passed (and under preferences, the course is considered complete once they pass).
    If the user fails the exam (cpQuizInfoTotalCorrectAnswers is less than 4), and it is not an attempt on a multiple of three (cpQuizInfoAttempts does not equal 3, does not equal 6, does not equal 9, and does not equal 12), then it jumps to a slide with a button we created called "Retake Exam." The button jumps them back to the introduction to the exam.
    If the user fails the exam (cpQuizInfoTotalCorrectAnswers is less than 4), and it is their 3rd attempt, it jumps them to a page that has a "Restart Course" button. This button executes a big advanced action that jumps them to slide 1, resets any user variables to 0, and shows or hides and thing that became unlocked as the user progressed through the course the first time.
    We set the actions up so that after 3, 6, 9, or 12 attempts, it will make take them to the "Restart Course" page, figuring by the 12th attempt they should have passed.
    Just food for thought and wanted to share the solution.
    Thanks for all your help!

  • Keynote 6.0 Play Slideshow from Beginning

    Is there a way to play from the beginning of the presentation other than selecting the first slide? Was hold down option key and press play button in 5.3.

    I was teaching my first class post-Mavericks upgrade and was having a fit finding out, in front of my class of 33 graduate students, that my projection set-up wasn't working. I had read something about getting rid of the menu bar on a secondary display in Mavericks and decided to try it. Since then, I've also read that assigning Keynote to all desktops, with the "Displays have separate spaces" box checked, might also do the trick, but I won't have a chance to test this until Monday afternoon. Glad you got it working!

  • How can I "clear" my old IPad? I'll sell it and must restart it from the begining as new, create new Apple ID,etc?

    How can I "clear" my old IPad ? I'll sell it and must restart it from the begining as a new one. To leve it as when I had purchased it.

    Settings>General>Reset>Erase All Content and Settings

  • How to restart a message from beginning

    Hi,
    in our test-xi we have 10.000 failed message because of a mapping error. The problem is, that the receiver determination was wrong so the wrong interface mapping was startet.
    If I restart the failed messages, only the step "message mapping" is running (because this step failed) - But I need to restart the message from beginning because the step "receiver determination" should run again.
    We need the thousands of messages for testing.
    How can I restart the message from beginning of the pipline?
    Is there a (dirty) possibility?
    Thanx and regards
    Wolfgang

    Hi!
    You can do in the below mentioned ways.
    1. You can copy the pay load and test the message in the RWB>Component Monitoring>Test MEssage and Paste your payload and resend.
    2. Go to the SMQ1 and SMq2 and resend all those quesues one by one and not all at a time.
    3. Go to SXMB_MONI select ur messages and and try to send again.
    *4. The most important thing is you can also manage such messages in the detailed manner either in Async mode or Syn mode and also you can cancel or Resend all those message in the below linnk which shows MESSAGE DISPLAY TOOL.
    [http://Host:Port/MessagingSystem/monitor/systemStatus.jsp]*
    Note:: Kindly make a note that do not send all the bulk of messages at time so that it may strucks in the queues and also if any respective message is strucked intially before sending first clear that message and then go for a new trial ok
    Regards::
    Amar Srinivas Eli

  • I've set up an album in iPhotos; when I click on the slideshow it begins with the last photo.  How do I get to run from the 1st photo like it use to?

    I've set up an album in iPhotos; when I click on the slideshow it begins with the last photo.  How do I get to run from the 1st photo like it use to?

    If you're referring to the iPhoto application on a Mac then read Léonie's post in this topic and see if it might apply to your situation: iPhoto slideshow shown in reverse order: Apple Support Communities
    Happy New Year

  • Start slideshow from manually chosen slide

    There are 50 slides in my project.
    How can I manually choose any of these slides and begin the slideshow there (e.g. choosing slide number 14 and beginning the slideshow from there)? 
    I can do this easily in iPhoto, but it doesn't work in Aperture - when I select, for example, slide 14 and try to start the slideshow from that slide, it always begins only from the beginning (i.e. slide 1).

    Have you considered to export your Slideshow as a High Definition Quicktime movie for the presentation? Then you might use iMovie to add chapter markers. However, exporting takes a long time for rendering and will need plenty of aditional disk space.
    But if you still have iPhoto that will be the best option for your needs.
    Regards
    Léonie

  • In alv report , how to reserve 20 lines from beginning of page

    hi experts
    in alv report , how to reserve 20 lines from beginning of page.
    regards
    subhasis.

    If by reserve you mean should not move on scrolling then make them KEY from fieldcatalog.
    But I think maximum of 10-12 can be handled by that.
    Regards,
    Amit
    Reward all helpful replies.

  • Importing slideshow from iMovie 09

    I don't know if it is a brain cramp or what, but I am having difficulty importing my slideshow from iMovie 09 into iDVD. I carry out all of the steps when in iMovie and then when I go to the media tab, my movie is not there. Can someone please help???

    This is actually quite simple. I'm assuming you want it on a DVD? To do this go into iMovie and got to your slideshow. Click the Share tab and then iDVD. This brings up iDVD and you go on and create your main menu and burn a disc.

  • How can I export a slideshow from iPhoto to iMovie 09.  I try but it only lets me import 211 out of the 311 photos I have in the slideshow.

    How can I export a slideshow from iPhoto to iMovie 09.  I try, but it only exports 211 out of the 311 photos I have in the slideshow I made on iPhoto.

    how do i change the format to the right one?
    Before you can decide what to do, you have to know what you are starting with. Sony MPEG-1 files would be converted one way while DivX or WMV files would likely be handled in another. Extraneous tracks can be removed directly with QT Pro but if you don't have QT Pro then there may or may not be other work around possibilities depending on the specific audio and video compression formats in use. The best place to start would normally be to double-clic the source file in iPhoto to open it in the QT Player. When it opens in the QT Player, check the "Inspector" window to see what it says on the "Format:" lines. This will tell you the type of audio and video content you are dealing with here. Then come and tell us so we can offer some specific conversion solutions.

  • How can I export a slideshow from iPhoto 9.5.1 ..........

    How can I export a slideshow from iPhoto 9.5.1 as Quick Time Movie? It exports now as m4v.

    That's a Quicktime movie these days. What format did you want?

  • Why is it when I add photos from iPhoto onto an iMovie project, it is not displayed when I play the movie from beginning to end, although I can see it in the (edit) format?

    Hi everyone,
    I'm just wondering why is it that when I place an image from iPhoto to an iMovie project, it is not displayed when I play it from beginning to end in fullscreen playback mode? However, when I exit it on the timeline, it is shown. All I did as drag it from the iPhoto column and place on at the beginning. I would really appreciate someones help because I really need to be able to place images onto my projects. Thanks!

    Sounds like your talking about iMovie for Mac?
    This is the iOS version, repost here:
                                                      iMovie

  • Why does my playhead return to the initial position when pausing/stopping playback after playing from beginning?

         How do I prevent the playhead from returning to it's original position after pausing or stopping with the spacebar or k button?  With either the skimmer on or off, whenever I pause or stop the **** playhead will always return to the position it was last at.  I don't understand why neither of the shortcuts would just stop the playhead at the point that is being played at.  This may seem like an extremely edgy way to go about editing, but I might actually wish to pause the playhead at any given moment and position my playhead nearby said moment before creating an edit point (without having to add a marker and return to it with the blade tool, or take note of the specific duration and use the duration control to go to that specific point or any other unnecessary steps when doing a rough cut).  I simply would like the playhead to pause/stop at the moment I press either keyboard shortcut.  After the many attempts at trying to make FCP X work for me and the many "workarounds" by FCPX enthusiasts, it's disheartening to know that most other editors in my circle who make a living doing paid commercial work are wondering why I've decided to take a break from using CS6 (and it's integration with the industry-standard AE) to give FCP X a shot, all to make very simple tasks like the one aforementioned a mystery...  any help in this matter would be greatly appreciated.

    Thank you for your response Luis and for your previous help (regarding multiple selections being added to the timeline in reverse order when working in list view in the event browser).
    Yes i've trashed my preferences, but I should be more specific as to what I am actually doing.  Because I am working from my macbook pro and do not have a "home button" which was the original shortcut to "play from/go to beginning" and because I did not like the replacement shortcut in FCP X to play from beginning (without a home button it was something like Function + Shift something else on a laptop) I became used to Adobe Premiere CS6 and made the return key my "play from beginning" shortcut.  It was available and did not have a use by itself (only to confirm changes/choices), did not effect it's use in conjunction with other shorctus so I choose enter as my "play from/go to beginning"...
    So when I play from the beginning and attempt to pause or stop the playhead, regardless of how I choose to do it (spacebar or k) it does not stop at that specific instance and always returns to where it previously was.  This seems very confusing and inconvenient, I would hope at least one of these shortcuts would actually stop the playhead where it was at that moment where I press stop or pause.  It's extremely frustrating knowing that I cannot pause the playhead where it's playing if I choose my "play from beginning" shortcut.
    Also since you seem to be a guru and an expert, i'd like to know if you cut with FCPX on a laptop and what shortcut you use whenever you'd like the playhead to go to the beginning of the timeline, end, etc since there are no "home" or "end" buttons on a laptop....
    Thanks a million, talk soon...
    Anthony

  • TS3623 IN THE MIDDLE OF A MOVIE ... APPLE TV STOPS WORKING. I HAVE YET TO WATCH A MOVIE FROM BEGINNING TO END WITHOUT APPLE TV LOSING ITS CONNECTION TO MY NETWORK

    I PURCHASED MY APPLE TV ON FEBRUARY 7, 2012. I HAVE YET BEEN ABLE TO WATCH AN ITUNES PURCHASED MOVIE FROM BEGINNING TO END WITHOUT IT LOSING ITS CONNECTION TO MY NETWORK.

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • I've burnt a slideshow of my photos onto a DVD disc but it will not play on my DVD player. It plays ok on my acer laptop. I burnt the same disc with slideshow from my old dell computer

    I've burnt a slideshow of my photos on my Apple Mac to a DVD+REW disc but it will not play on my DVD player or on a combined DVD/TV. However it will play on my wife's Acer laptop. I then erased the disc & burned another slideshow from my ancient Dell computer onto the same disc &it played just fine on everything. So it seems the problem ids somewhere in the Apple Mac process. Any ideas?
    Keith C

    Gary Scotland wrote:
    If you want to play material on a dedicated DVD Video hardware player, you must create a DVD video disc, and you must use a DVD authoring application.The software creates files that the DVD video player can play and will burn them to a recordable DVD disc. Examples of applications are:
    Roxio Toast and iSky DVD Creator
    Mac's used to be supplied with iDVD authoring software but Apple discontinued it in 2011.
    Thanks for that.  Will need to check iSkysoft out.  I am in the process of looking for a VisualHub replacement/backup.  Especially when it comes to ease of use.  Toast is ok.  Just looking for something along the lines of VH. 

Maybe you are looking for