Restiction of material types based on the industry sector?

I have developed specific industry sector for my client and also developed specific material types (Z*) for them.
But then i cannot prevent my user from creating the material master with the incorrect industry sector and also they are able to create material types choosing the incorrect material type?
Can somebody please advise how to restric this.
Thanks
Regards

In the MM01 trxn ..
Enter Industry sector & Material Type.
then Click > Defaults > Industry Sector > Put tick to Industry sector ..
So, that the Z* Industry sector will become Default..
As user will not see Industry sector , there is no Question of changing..
Pls do it for All Users..

Similar Messages

Material Statuses based on the Purchase order Document type

Hi Experts,
We need to maintain the Plant material status based on the purchase order document type.
Example - If I am using NB for normal purchase orders and ZB for STO procurement then, there should be a material status which should give warning message - 'do not use ' for ZB STO purchase orders and it should allow to create NB purchase orders for that same materials.
Please advise what are the possibilities?
Thanks
Regards
MM

Hi Gurus,
Thank you for your reply, Please find my replies below
@@ - Mallinath - We need this restrictions for some type of materials ( with specific Material types) which should not be procured through inter company STO process, buying plant should use the normal purchase. for other Material types they should be able to use the inter company STO process.
@@ DEV - We are already using the Spl. Procurement keys for inter company STO process.
Example - Material type ZXYX should not use the inter company STO process, but it should be allowed all other processes.
Please advise how we can control this process?
Thanks
Regards
Raja

Ignificance of the Industry Sector selection in the Material Master

hi all,
We need information on the significance of the Industry Sector selection in the Material Master field. I understand that it can influence field selection and the screen sequence of the material master record. We are particularly interested to know the influence of the industry sector u201CPharmaceutical Industryu201D .
Any inputs would be greatly appreciated.

Hi
Please check follwoing links
[MM01- Industry Sector;
[http://help.sap.com/saphelp_46c/helpdata/en/ff/515b3149d811d182b80000e829fbfe/content.htm]
1. Define Industry Sectors and Industry-Sector-Specific Field Selection (transaction OMS3) -> assign a field reference to field selection
2. Maintain Field Selection for Data Screens (transaction OMS9) -> define a specific field selection for a field selection group (for example, depending on industry sector (the field reference appears on the lower table control).
Like the material type, the industry sector also has a control function. When you create a material master record, the industry sector determines:
Which screens appear and in which order
Which industry-specific fields appear on each screen
The industry sector you assign to a material cannot subsequently be changed. In Customizing, you can define new industry sectors and maintain the field reference for field selection control according to your enterprise-specific requirements.
Most data in the material master record can be maintained directly by the user. But some information is automatically updated by the system. When you enter goods movements, for example, the system updates the stock and consumption data. Statistical information, such as the date of original creation and that of the last change, can be invoked with , with the quick-info text Information on material.
Some data in the material master is used for information purposes only, for example, description, size, and dimensions. Other material data has a controlling function in an application. For example, the MRP type controls the MRP procedure and the price control indicator determines which material valuation procedure is used
Regards
Kailas ugale

How to find the industry sector of a material?

Dear all,
Is it possible to find the industry sector of an existing material?
Thanks, Jerome

Dear Jerome Zhao,
Using Table MARA in T code SE16, give the input as the material for which
you want to find out the Industry sector type for the field MBRSH.
If its a small notation For example M - Mechanical Engg,check the expantion for
this alphabet using T Code OMT3E.
Reward points if useful.
Regards
Mangal

How to change the Industry sector of a material

Hi,
We made a Material Number with wrong Industry sector. How can i change it to right Industry sector.
Industry sector should be Electrical inplace of Chemical Industry.
Plz guide..

Please check these links out for details:
Re: change industry sector
Re: change the Industry Sector
Change industry sector
Edited by: Afshad Irani on Apr 24, 2010 12:50 PM

Change   the Industry Sector

Hello,everybody!
        After the material master data have been created,can we make a change of the Industry Sector ? If do, how to realize it?
       Thanks in advance !

HI,Stephen and Yogesh:
Thanks for your replies!
The reason I want to change the industry sector is that:
We filled the industry sectors of all materials with different labels (e.g., A and B).
Now we want unify them to the same label.
It seems this change is impossible according to your information.
Thanks!

How to find the list of material variant based on the characteristics value

Hi
We are creating materials variants for FERT Material Type in material master in MRP-3 view .There we configure the variant by attaching characteristics value
Now we want to have a report , which can give the list of material variants , if char value is given in selection
Can somebody guide me if there is standard report for this OR what is the linkage in Table , so that we can develop a report
rgds
Sandeep

I couldn't find a standard report to get the material variants based on characteristic values (the nearest I could find was CT12) but I wrote a report some time back here's the table join logic for the main select statement.
select a~matnr
        e~atwrt
        h~atwtb
into table i_tab
      from MARC as a
      inner join IBIN as b
      on b~instance eq a~cuobj
      inner join IBIB as c
      on c~ibase eq b~ibase
      inner join IBINVALUES as d
      on d~in_recno eq b~in_recno
      inner join IBSYMBOL as e
      on e~symbol_id eq d~symbol_id
      inner join CABN as f
      on f~atinn eq e~atinn
      inner join CAWN as g
      on g~atinn eq e~atinn
      and g~atwrt eq e~atwrt
      inner join CAWNT as h
      on h~atinn eq g~atinn
      and h~atzhl eq g~atzhl
     where     a~matnr in s_matnr
            and e~atinn in s_atinn
            and e~atwrt in s_atwrt
           and b~valto eq '99991231235959'. "This is important condition
I included bare minimum fields to suite your requirement needs you can add whatever other field you want . Though I tested the table join, I suggest you to test it again before writing your own ABAP program using SE16N.

Material Valuated based on the % content

Hi experts,
I have a business scenario where I buy a raw material from a vendor which will be managed in batches.
When goods receipt is made accounting documents are created based on the active component (in %) available in the batch.
For e.g.: if the batch is 100% pure, then the GR is made at the PO price.
if the batch is 50% pure, then the GR is made at half the PO price.
I have created class and characteristics and attached to the material.
But when I make a GR I am getting an error "No proportion valuations exist for material XXX in valuation area XXX".
Expecting Ur guidance,
Adhi.

Hi
In class have you maintained organizational area "S"?. And there are many check points you need to check.
See the below link. it will help you
http://help.sap.com/saphelp_46c/helpdata/en/dd/6a5c580f6011d383720000e8a5eb64/content.htm
Regards
Antony

GR Output type based on the different PO

Hi,
When the user do the GR based on the Different Purchase Order Say Eg: NB, ZNB, ZCO. The GR should print in the Different Printer Say Printer A for Document Type NB, Printer B for Doc Type -ZNB and Printer C for document Type ZCO.
How to do the Configuration Setting Output Types for Goods Receipt.
Pls help me on this.....Ugrent..!!!

try using t code omj3 and mn21

Raw material procurement based on the LTP Plan

Dear Friends,
How can I create a procurement proposals based on the LTP Plan. For example for material A, I am doing the LTP planning for entire Year. As per the LTP plan I got the Raw material requirements. I don't want to make the total plan as active. That means I don't want to create PIRs for my finished material A for the entire year. But as per the LTP plan of finished material A... I want to create a procurement proposals for the raw materials for the entire month through schedule lines... How can we do it?
If any further clarification is required... please let me know.
Regards.

Hi,
Based on the forecast for the material A, the simulative planned orders will generated for its raw material duirng the LTP run.
If you want to convert hte planned proposal into PR then you can run MD43 for the particular Raw material.
Before running MD43, in MS04 - set firming date and then run MD43, planned orders will get converted to PR (firmed). Then run LTP again using MS02 (then the planned orders get deleted)
Please check and come back if you need any clarification
Thanks,
JK

Hide the content type based on the roles

Hi All,
Here my question...I hard to make like shopping by using sharepoint.
I can't make the user to see what their cannot see based on the roles.
How to solve it??
Thank you

Hi Ck,
Can you tell us more details of your problem?
Based on experience,
limit the number of items based on the value of the SPChoiceField by using the SPContentType.Hidden property.
Anythings, please refer to this problem or leave your message here.
Thanks

Reg: material type according to the unrestricted stock equals to zero.

Hi gurus,
how to use alv for this .
regards,
vivek

Hi,
Are you talking about the KMAT purchases should be always sales order specific, if yes then In MRP4 view of material master, enter Individual/Collective as "1" (Individual Stock)
And now, if you want the Stock Valuation of Sales Order then check following points;
1. Go to VA03 - Here under "Procurement" Tab, get the RqTy (Requirement Type, for e.g. KE)
2. Go to OVZH - Here get the Requirement Class assigned to this Requirement Type (for e.g. 040)
3. Go to OVZG - Here go to details of Requirement Class (for e.g. 040) and check following under "Account Assignment" Tab,
Acct.assig.cat. - M
Valuation - Blank
Here Valuation should be "M" i.e. Separate valuation with ref. to sales document/project
If it is blank, then you can not enter "M" here in this screen.
4. Go to SPRO > Sales and Distribution > Basic Functions > Account Assignment/Costing > Maintain Requirements Classes For Costing/Account Assignment > Here for Requirement Class (for e.g. 040), maintain Valuation as "M" i.e. Separate valuation with ref. to sales document/project
Now run a complete new cycle and check.

Relationship between material type and industry sector

Hi experts
when using t-code mm01,there are two fields material type and industry setor in screen.Is there any relationship between material type and industry sector? I want to know if user be able to see the material type related to particular industry sector?
thanks in advance!

Hello
There is no direct relationship between the material type and the industry sector.
The industry sector is used only for field sttus maintenance (fields in display/optional/requierd entry) in transactions.
We will assign seperate field reference groups to industry sectors and deopending on how we configure the field references, the fields will appear for the materials created for that industry sector.
regards

MM01-Industry sector

Hi all,
While creating material code using MM01 i have wrongly put industry sector as OILl.Now i need to change the industry sector. specify which Trasancation Code to be used.
or specify some procedure.

Hi
Industry Sectors
Use
When you create a material master record, you are required to classify the material according to
industry sector and material type.
Like material types, industry sectors have control functions in the R/3 System. For example, it is
a factor determining the screen sequence and field selection [Page 97] in a material master
record. Once you have assigned an industry sector to a material, you cannot change the industry
sector again afterwards.CChheemmiiccaall iinndduussttrryy
MMeecchhaanniiccaall eennggiinneeeerriinngg
Features
The standard R/3 System contains the following industry sectors. The ID used to identify the
industry sector internally appears in parentheses.
Plant engineering and construction (A)
Chemical industry (C)
Mechanical engineering (M)
Pharmaceuticals (P)
The other sectors are for retail.
Activities
Your system administrator can define other industry sectors in Customizing for the Material
Master in Define Industry Sectors and Industry-Sector-Specific Field Selection [Ext.].
This is MM tutorial notes
Industru sector cannot be changed in std SAP
Raja

Industry sector of the Material

Hi there!
Do we have any way out to find out the 'Industry Sector' for the material (irrespective of any material type) which is already created and available in the system.
Ex: Material - XYZ - Is created in the system a year back.
I want to know the which industry sector does it belong to?
Is there any way out? If Yes, What are the ways to find out this.
Regards,
Suresh

Dear,
Use MARA table.
Enter SE16 t-code.
Here enter table MARA and press enter.
Then enter your material codes and click on execute.
You will get material wise industry list
Regards,
Mahesh Wagh

Restiction of material types based on the industry sector?

Similar Messages

Maybe you are looking for