Restirct single values in selection screen

Hi,
I module pool have a input field. This field is called thru COMPLEX_SELECTIONS_DIALOG and have restricted the range values (only single values can be entered) Now users can enter any number of single value in the input field. My requirement is to restrict users to enter only 5 values in the input field.
I have checked the function module SELECT_OPTIONS_RESTRICT but there is option to restrict the number of enteries in single values.
How to restrict ?
Thanks for your replies.

Hi,
You can control the select-option entries through the parameter  (EXCLUDED_OPTIONS   = RSOPTIONS ) in the fn. module COMPLEX_SELECTIONS_DIALOG. With this you can make sure that only single values are entered. ( You can take out the ranges here).
You can restrict the entries for the single ranges by checking the count of records in the return internal table for ranges.(TABLES : RANGE).You can throw a message by checking the count of this table as all the entered values will be available.
Hope this helps..
Regards
Deepu.

Similar Messages

  • Excluding single values on selection screen

    Hi,
    I'm using standard PCH logical database on a selection screen. Im running the report for multiple org unit, lets say A,B and C.
    Within org unit A are more org unit e.g 1a, 1b, 1c and i want to exlude 1c. I added it to the negative single values of the multiple selection but its still coming out on the report.
    Any ideas? Listing out all the ones, e.g. 1a, 1b, 2a, 2b, 2c etc isnt really an option of there as hundred and hundreds of them
    Thanks.

    Hi,
    Use FM SELECT_OPTIONS_RESTRICT. Pl. check the sample code:
    *& Report  Z_TEST_JG
    REPORT  Z_TEST_JG.
    tables: vbak.
    TYPE-POOLS: sscr.
    DATA:
         v_restrict       TYPE sscr_restrict,
         v_opt_list       TYPE sscr_opt_list,
              v_asn            TYPE sscr_***.
    select-options: s_vbeln for vbak-vbeln no intervals.
    INITIALIZATION.
      PERFORM sub_restrict_option.
    FORM sub_restrict_option .
      CHECK v_restrict-opt_list_tab[] IS INITIAL.
      CLEAR v_opt_list.
      v_opt_list-name       = 'EQ'.
      v_opt_list-options-eq = 'X'.
      APPEND v_opt_list TO v_restrict-opt_list_tab.
      CLEAR v_asn.
      v_asn-kind            = 'S'.
      v_asn-name            = 'S_VBELN'.
      v_asn-sg_main         = 'I'.
      v_asn-sg_addy         = space.
      v_asn-op_main         = 'EQ'.
      v_asn-op_addy         = 'EQ'.
      APPEND v_asn TO v_restrict-***_tab.
      CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
        EXPORTING
          restriction            = v_restrict
        EXCEPTIONS
          too_late               = 0
          repeated               = 0
          selopt_without_options = 0
          selopt_without_signs   = 0
          invalid_sign           = 0
          empty_option_list      = 0
          invalid_kind           = 0
          repeated_kind_a        = 0
          OTHERS                 = 0.
    ENDFORM.                    " sub_restrict_option

  • How to add default value to the Exclude single value in selection screen..

    Hi Experts,
    i have searched in sdn, but not able to get proper results,
    in my report i have a selection screen, in that there is a Select-option like status, for this status i need to exclude '02'
    for this i need to add the default value under exclude singale values option, not in lower and upper limit.
    can anyone help me...
    Regards,
    Sudha.
    Moderator message: please search for available information/documentation before asking, don't just claim you did.
    Edited by: Thomas Zloch on Oct 27, 2010 2:50 PM

    Hi,
    you can use the function module SELECT_OPTIONS_RESTRICT .
    This function module simplifies the handling of SELECT-OPTIONS on the selection screen by restricting possible selection options and signs.
    By calling this function module, you can restrict the number of selectio options available for the chosen selection field. You can also disable the function allowing users to enter values to be excluded from the selection (SIGN = 'E').
    Regards,
    S.Velsankar

  • Difference between Multiple single values and Selection option variables

    Hi !
    Can any one tell me the difference between variable types:
    Multiple single values and Selection option?
    I used each one of them for selecting values for a characteristic but could not notice a difference in choosing values.
    Is there some difference in functionality or can they be used interchageably?
    Regards,
    Sri Harsha

    Harsha,
    When you go for slection option, in the variable input screen you will be having a button in the last where you can give your slections. There you can maintain either multiple single values and Multiple intervals or else not equal to also..
    Just check out there... you will be having tabs for each..
    Assign Points if it helps
    Gattu

  • How to refresh value in selection screen field

    Hi Experts,
    I have a requirement to refresh the value in selection screen.while i run the report in selection screen i selecting one variant for look the output if i use some other field value with same variant without save its working fine i am avle to see the data but while i come back to again selection screen and selecting some other variant that extra add value is not getting refresh its showing with new variant.Its happening for only one variant not for all if i select some other variant then its getting refresh value in same field.Any one can help me for this issue.
    Thanks.

    Hi,
    That means, I believe - the value that is "not changing" is saved in the particular variant. You can easily verify it by starting the report without variant and then selecting the variant in question. Remove the value from screen and save the variant again. Don't forget to check of variant needs to be transported from development system...
    cheers
    Janis

  • How to pass a default value in selection screen of logical database pnpce

    Dear All,
    Can any one tell me how to pass a default value in selection screen of logical database pnpce .
    Regards
    Rakesh Singh

    Hi Rakesh,
    Go to SE36 (logical database Builder).First enter PNPCE in Logical Database and press documentation,here you will get the details of exactly what is PNPCE and how it works.After that select selections in subojects in se36 only and enter display ,there you have the include from where you acn get the idea.
    Regards,
    Rahul

  • Problem in getting parameter value from selection screen in web dynpro abap

    Hi,
    I am facing problem in getting parameter value from selection screen.
    Please find my code below:
    DATA LT_PAR_ITEM TYPE IF_WD_SELECT_OPTIONS=>TT_SELECTION_SCREEN_ITEM.
    FIELD-SYMBOLS:<FS_PAR_ITEM> LIKE LINE OF LT_PAR_ITEM,
                                 <FS_OBJ_USAGE>    TYPE REF TO data.
      WD_THIS->M_HANDLER->GET_PARAMETER_FIELDS( IMPORTING ET_FIELDS = LT_PAR_ITEM ).
      LOOP AT LT_PAR_ITEM ASSIGNING <FS_PAR_ITEM>.
        CASE <FS_PAR_ITEM>-M_ID.
          WHEN `OBJ_USAGE`.
             ASSIGN <FS_PAR_ITEM>-M_VALUE->* TO <FS_OBJ_USAGE>.      
    [ Here, sy-subrc is 4,  <FS_OBJ_USAGE> is not assigning.]
        ENDCASE.
      ENDLOOP. 
    So, can any one solve this problem.
    Thanks in advance,
    Radhika

    Hi Radhika,
    Try using GET_RANGE_TABLE_OF_SEL_FIELD...
    Please Refer below code..
       DATA: NODE_FLIGHTS TYPE REF TO IF_WD_CONTEXT_NODE.
      DATA: RT_CARRID TYPE REF TO DATA.
      DATA: ISFLIGHT TYPE TABLE OF SFLIGHT.
      DATA: WSFLIGHT TYPE SFLIGHT.
      FIELD-SYMBOLS: <FS_CARRID> TYPE TABLE.
    Retrieve the data from the select option
      RT_CARRID = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
    Assign it to a field symbol
      ASSIGN RT_CARRID->* TO <FS_CARRID>.
      CLEAR ISFLIGHT. REFRESH ISFLIGHT.
      SELECT * INTO CORRESPONDING FIELDS OF TABLE ISFLIGHT FROM SFLIGHT
                           WHERE CARRID IN <FS_CARRID>.
      NODE_FLIGHTS = WD_CONTEXT->GET_CHILD_NODE( NAME = `FLIGHTS` ).
      NODE_FLIGHTS->BIND_ELEMENTS( ISFLIGHT ).
    Thanks,
    Regards,
    Kiran

  • Default value on Selection Screen

    Hi experts,
    I want to put sy-datum + 1 as a default value on selection screen.
    I tried this but it didnt work. Please help me.
    DATA : tarih like sy-datum.
    initialization.
    tarih = sy-datum  + 1.
    SELECTION-SCREEN BEGIN OF BLOCK 3 WITH FRAME TITLE TEXT-002.
    parameters : h_tarih like sy-datum obligatory default tarih.
    SELECTION-SCREEN END OF BLOCK 3.
    Thanks

    Hi,
    Do it in INITIALIZATION event.
    SELECTION-SCREEN BEGIN OF BLOCK 3 WITH FRAME TITLE TEXT-002.
    parameters : h_tarih like sy-datum obligatory default tarih.
    SELECTION-SCREEN END OF BLOCK 3.
    INITIALIZATION.
    h_tarih = sy-datum + 1.
    In this case no need to have one more extra variable. U can directly assign to ur parameter.
    In data declaration u can only default hard coded values. But not calculated values. This is because first selection screen will be triggered and later ur calculations. So at the time of selection screen is triggered ur variable dont have any value. Thats why it was not working. Change ur code to like above. It will work fine.
    Thanks,
    Vinod.
    Edited by: Vinod Reddy Vemuru on Jun 27, 2008 12:37 PM

  • How to put values from selection screen to  ztable

    hi all,
    i have created a ztable.
    now i want to put data through se38.
    i have given 5 parameters in selection screen same as there in ztable.
    now if i put values in selection screen then it should put that values to my ztable .
    how can i put values into my ztable.
    i used insert but not workiing.

    Hi,
    Try this.
    TABLES : ztable.
    SELECTION-SCREEN:BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
    PARAMETER : p_field1 TYPE field1_in_ztable,
                            p_field2 TYPE field2_in_ztable.
                            p_field3 TYPE field3_in_ztable.
                            p_field4 TYPE field4_in_ztable.
                            p_field5 TYPE field5_in_ztable.
    SELECTION-SCREEN:END OF BLOCK b1.
    DATA : itab TYPE TABLE ztable,
                 wa_itab TYPE ztable.
    AT SELECTION-SCREEN.
          MOVE p_field1 TO wa_itab-field1.
          MOVE p_field2 TO wa_itab-field2.
          MOVE p_field3 TO wa_itab-field3.
          MOVE p_field4 TO wa_itab-field4.
          MOVE p_field5 TO wa_itab-field5.
    INSERT ztable FROM wa_itab.
    IF sy-subrc = 0.
    MESSAGE 'Successfully saved' TYPE 'I'.
    ENDIF.
    Thanks,
    Sri.
    Edited by: Sri on Jul 28, 2009 4:15 PM

  • Default value for selection screen field

    Hi all,
      I am using LDB PNPCE. I want to give default value for field Personnel area on selection screen.
    How can I do it?
    Thanks
    Rahul

    Hi Rahul,
    In the INITIALIZATION event we can set the default values for selection screen fields.
    INITIALIZATION.
    loop at screen.
    if screen-name = 'S_MATNR-LOW'.
    CLEAR S_MATNR.
    s_matnr-low = '1234'.
    s_matnr-option = 'EQ'.
    s_matnr-sign = 'I'.
    append s_matnr.
    CLEAR S_MATNR.
    s_matnr-high = '5678'.
    s_matnr-option = 'EQ'.
    s_matnr-sign = 'I'.
    append s_matnr
    clear s_matnr.
    endif.
    endloop.
    Hope it helps.
    Mark if useful
    Regards,
    Saumya

  • Populate values at selection screen

    Hi All,
    My requirement is:
    There are 2 radio buttons and 2 parameter fields.
    By default, one radio button is selected and the two fields are populated with some values at the selection screen.
    If the other radio button is selected, we need to pass different values to the two parameter fields.
    Can you please suggest me how to populate values at selection screen.
    I have tried populating them using AT SELECTION SCREEN OUTPUT, but didn't work.
    Any pointers are helpful.
    Thanks & Regards
    Gowthami

    Hi Gowthami,
        Try it this way:
    PARAMETERS:
      R1 RADIOBUTTON group rad USER-COMMAND ABC default 'X',
      R2 RADIOBUTTON group rad.
    Parameters:
      char1(10) type c,
      char2(10) type c.
    Initialization.
      char1 = 'radio1'.
      char2 = 'radio1'.
    At Selection-screen output.
      if r2 = 'X'.
    *    loop at screen.
          char1 = 'radio2'.
          char2 = 'radio2'.
    *      modify screen.
    *    endloop.
      elseif r1 = 'X'.
    *    loop at screen.
          char1 = 'radio1'.
          char2 = 'radio1'.
    *      modify screen.
    *    endloop.
      endif.
    With luck,
    Pritam.
    Edited by: Pritam Ghosh on Feb 24, 2009 11:54 AM

  • Passing the values from selection screen to screen painter

    Hello Friends,
    I'm making one report program in which im calling  one screen which i have designed, in my selection screen there is a select option for customer  tht accepts value range now i want to select all the customers entered in select options and pass these values in screen(screen painter).
    pls guide me how this can be done.
    Regards,
    Sunny

    Screen painter is a tool in ABAP dev workbench used to create the screens using the
    T-code SE51. In the screen painter, you can define the following interface elements with their associated attributes.
    1. Input/Output Fields
    2. Field Names
    3. Checkboxes
    4. Radio Buttons
    5. Group Boxes
    6. Sub screens.
    7. Pushbuttons with No Fixed Position
    Create a Z program in tcode SE38.
    Go to transaction SE51.
    Enter the created program name and screen number.
    Click on flowlogic tab. 
    Uncomment the statement u201C MODULE STATUS_0100 u201C. 
    CASE SY-UCOMM.
        WHEN 'EXIT'.
          LEAVE PROGRAM.
        WHEN 'BACK'.
          LEAVE PROGRAM.
        WHEN 'DISPLAY'.
          SELECT SINGLE Fileds to selsct
               INTO (interanl table or tablename-fileds)
          WHERE Condition.    WHEN 'CLEAR'.
          CLEAR table.
      ENDCASE.
    ENDMODULE.

  • How to get option select single Values in select options

    Hello All,
    I have a requirement where, in select-options i should avoid the range selection and should have only select single values option. User wanted to give the list of 10000 materials by using copy and paste as we have in normal abap with pase clip board option.
    Please let me know if you need any further clarification. your quick response would be highly appreciated.
    Thanks
    Raj.

    Thanks for the reply, I have already done this but when you add values to it at a time 1000 material information we can not add.
    so you go to selection screen and you have only one input box with arrowe button. click on the arrow and then you will get the screen where it will ask you to add five records and that to ranges.
    but if you click the same arrow in normal selection screen of SAP you get 4 tabs in which first tab will be select single values.
    and there by using copy from notepad option we can add how many entries we want.
    Let me know if you need any further clarification to understant the requirement.
    Thanks,
    RaJ.

  • Hide the high value in selection screen range

    In the selection screen of an ABAP Program, I need to use a field where I have to restrict the users from entering a range of values, but still need to enter a list of values.  I tried using 'no intervals' in the select-options, but still it lets me enter range.  How can I accomplish this?
    Thanks

    You need to use the function module SELECT_OPTIONS_RESTRICT additionally to the simpler NO INTERVALS addition for this.
    That way, besides of restricting the "TO" input field from appearing, you also restrict the tabs in the extension screen (yellow arrow button).
    Check this code and adapt to yours:
    DATA:
      wa_restrict TYPE sscr_restrict,
      wa_opt_list TYPE sscr_opt_list,
      wa_***      TYPE sscr_***.
        wa_opt_list-name = 'OBJECTKEY1'.
        wa_opt_list-options-eq = 'X'. "Enabling only single inclusion lists
        APPEND wa_opt_list TO wa_restrict-opt_list_tab.
        wa_***-kind = 'S'.
        wa_***-name = 'S_CONOCI'. "Replace with your select option name
        wa_***-sg_main = 'I'.
        wa_***-sg_addy = space.
        wa_***-op_main = 'OBJECTKEY1'.
        APPEND wa_*** TO wa_restrict-***_tab.
        CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
             EXPORTING
                  restriction            = wa_restrict
             EXCEPTIONS
                  too_late               = 1
                  repeated               = 2
                  selopt_without_options = 3
                  selopt_without_signs   = 4
                  invalid_sign           = 5
                  empty_option_list      = 6
                  invalid_kind           = 7
                  repeated_kind_a        = 8
                  OTHERS                 = 9.
        IF sy-subrc <> 0.
          MESSAGE e013.
        ENDIF.
    Hope this helps.
    Regards
    Edited by: Alejandro Bindi on Sep 4, 2008 12:57 PM

  • Cannot enter value in selection screen for Hierarchy variable.

    Hi All,
    I have a hierarchy variable on the selection screen for Org unit.
    When i execute the report via Bex or RSRT i am able to enter the value directly into the selection screen input field without going for F4 help and then selecting the value.
    But when the same query is used in web template and executed the input field for the variable on the selection screen is greyed out and doesnt allow to type in the value. Only way to fill in the value is via F4 help.
    Can anyone tell why is this happening and is there any way this can be changed?
    Thanks in advance.
    -RJ

    Hi Prakash,
    I am not able to select or click on the input field of the selection screen before and after selecting the value
    CTRL+K doesnt work for me.
    The display field is populated only when i select a node from the F4 help screen.
    When executed from RSRT the field is highlighted and i am able to enter the value unlike when executed on web browser.
    The variable is Mandatory multiple single value readu for input.
    I found an article saying that for hierarchy node variables the values are forced by F4 value help as the values that are entered manually might not be unique.
    This is the link
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/15839190-0201-0010-adb1-d2edd9857b0a
    I would like to know if there is a work around or setting that can be made to make it work?
    -RJ

Maybe you are looking for