Restoration Incomplete

Encountered the following message after the notebook completed reading from all 6 Recovery disk for my HP Envy4-1101TX notebook Win8 recovery:
Restoration Incomplete
The restoration did not complete.
Please select one of the following buttons:....
Managed to extract the logs:
[ 1:00:33.02] Required [CoreCountrySpecific]. But, Base OS is [Single Language] edition...
[ 1:00:33.02] Wrong edition is required...
[ 1:00:33.02] This is Customer image... CTO PANIC,    .
Component: Windows 8 Preinstall Diagnostic Tools - TDC
Timing: FactoryUpdate
Error: Cannot upgrade OS edition to China for non-China image
Error: Action is not allowed
Next Step: Please reset your localization code or Win8 Configuration value via EEPROM
[ 1:03:04.34] ------------------------------------------------------------------------------------------
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[ 1:03:04.34] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[ 1:03:04.34] ------------------------------------------------------------------------------------------
[ 0:59:48.54] Start BBOffline.cmd...
UPDrv=[C:]
[ 0:59:48.57] Set UIA Error Code to 951
[ 0:59:48.74] Delete [FBI] folder.
[ 0:59:48.74] WinPE is 64bit.
[ 0:59:55.22] Starts [FixUps].
[ 0:59:55.25] ---------------------------------------------------------------------
[ 0:59:55.25] FixUps.cmd...
[ 0:59:57.77] FixUps.cmd completed...
[ 0:59:57.77] ---------------------------------------------------------------------
[ 0:59:57.77] Starts [Tweaks for SSRD].
[ 0:59:57.80] ---------------------------------------------------------------------
[ 0:59:57.80] SSRD Tweaks to change user default locale...
[ 0:59:57.80] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
[ 0:59:58.03] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US ".
[ 1:00:05.73] ---------------------------------------------------------------------
[ 1:00:05.75] Launch PININST.exe for Offline ...
[ 1:00:20.89] Starts [Sleep 10 sec].
[ 1:00:30.92] Starts [Create RStoneFUpdate.INI].
[ 1:00:31.60] Starts [create 1GB Pagefile for offline].
Volume in drive C has no label.
Volume Serial Number is 3EDD-B459
Directory of C:\System.sav\bbv
06/02/2014 01:00 AM     1,073,741,824 pagefile.sys
               1 File(s) 1,073,741,824 bytes
               0 Dir(s) 32,564,887,552 bytes free
[ 1:00:31.66] Brand detection.
[ 1:00:31.68] Customize error handling for Specialize ~ BBV1.
        0 file(s) copied.
[ 1:00:31.71] ---------------------------------------------------------------------
[ 1:02:26.40] Check Win 8 configuration...
[ 1:02:27.40] Check system ID...
[ 1:02:28.46] Check OS SKU...
[ 1:02:29.50] Check option code...
[ 1:02:30.52] Check brand name...
SKU_DEF_COUNTRY=[215]
SKU_DEF_SYS_LOC=[en-SG]
Reset country in administrator...
Reset country in Default user...
Reset System locale
Deployment Image Servicing and Management tool
Version: 6.2.9200.16384
Image Version: 6.2.9200.16384
Reporting offline international settings.
Default system UI language : en-US
System locale : en-SG
Default time zone : Pacific Standard Time
User locale for default user : en-US
Location : Singapore (GEOID = 215)
Active keyboard(s) : 0409:00000409
Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)
Installed language(s): en-US
Type : Fully localized language.
Installed language(s): zh-CN
Type : Partially localized language, MUI type.
Fallback Languages en-US
The operation completed successfully.
Updated System Locale info...
[ 1:02:43.55] Start PIN Tweaks...
[ 1:02:44.58] ---------------------------------------------------------------------
[ 1:02:44.58] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
[ 1:02:44.58] ----------------------------------------
[ 1:02:44.58] Tweaks for OOBE's Unattend.xml
[ 1:02:44.58] to pick up the proper file...
[ 1:02:44.58] ----------------------------------------
[ 1:02:44.58] rename unattend.org to unattend.or_
[ 1:02:44.62] ----------------------------------------
[ 1:02:44.62] without Light Sensor..
[ 1:02:44.65] ----------------------------------------
[ 1:02:44.65] This is Restored image [RImage.flg]...
[ 1:02:44.65] ---------------------------------------------------------------------
[ 1:02:45.58] Start MIR Tweaks...
[ 1:02:46.58] ---------------------------------------------------------------------
[ 1:02:46.58] [MIR Tweaks] ...
[ 1:02:46.58] ---------------------------------------------------------------------
[ 1:02:47.60] Start Factory Update(s)...
[ 1:02:59.63] Start QFE Offline installation...
[ 1:03:04.21] PININST_OFF: PASSED...
[ 1:03:04.25] Type C:\System.sav\Logs\BBFindEr.log...
[ 1:03:04.26] Type C:\System.sav\Logs\BBFindE0.log...
---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
Result=PASSED
[ 1:03:04.26] There was no QFE installation...
[ 1:03:04.26] Check FUList.log if there is duplicate Desc...
No duplication.
[ 1:03:04.32] No Duplicated Desc is found... PASSED.
[ 1:03:04.32] There was no Factory Update...
there might be unexpected reboot during BBV Clean or Last...
The process will cause CTO panic because the image might not be normal...
Anyone has a solution for it?
Thanks!

Product: Pavilion G6 2301ax
Pre-installed: Win 8 Home basic single language
Recovery drive inside: Removed
Recovery Dvd's : I have made before removing recovery drive
Current OS: Windows 7 Ultimate
want to install : Minimum recovery from Recovery Dvds
Error Detail:
1. Intallation completes upto first reboot correctly.
2. When restarts it starts Installing Drivers.
3. But suddenly error appears:
" Restoration Incomplete.
Please select one of following."
My Laptop Battery is completly dead. and when laptop restarts while battery in it takes upto 2-3 minutes to show active screen and that starts from just boot. can that be a problem.
it restarts normally while battery is not used. (i have not tried installing windows without battery yet!)
so what are my options?

Similar Messages

HP Pavilion dv6-6b47dx gets "Restoration Incomplete" from Recovery Manager.

I got my son's older HP Laptop, and decided to restore it before using it for myself. Previously it was working OK. An HP Pavilion dv6-6b47dx gets "Restoration Incomplete" from the Recovery Manager. I have tried running the recovery manager from both the HD partion and the DVD media I created. The HD and Memory pass. The wireless f12 key is off, and can not be turned back on from the keyboard. Some previous post have suggested the wireless being off could be a problem. Any suggestions would be greatly appreciated, Thanks!

Hi
No that Recovery media won't work in your laptop.
ISO file can be used to clean install. You'll have to get all the 25 character alphanumeric product activation key printed on the COA label on the back of your laptop to be clearly & legibly readable for activation of ISO after install.
Tutorial: http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html
For additional drivers you can get them here:
https://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&os=4063&product=5197401&soft...
AMD chipset driver :
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
Download, save them to a USB and install them from there during/after Win 7 installation.
You have to first install chipset, restart system - then audio driver-restart, graphic driver- restart, ethernet controller(LAN), network controller(WLAN & Bluetooth), card reader, touchpad , Protect smart hard drive protection driver, quick launch software in order.
I could see that your model came with Windows 7 Home Premium (64-bit) pre installed.
Here is the ISO file:
http://msft.digitalrivercontent.net/win/X17-58997.iso
Windows 7 Home Premium x64 English
Size: 3,243,070KB, MD5 hash: a319b5826162829c436306bebea7f0ff
Source: http://www.w7forums.com/threads/official-windows-7-sp1-iso-image-downloads.12325/page-2#post-124821
Download , save it to another PC, then make a bootable DVD/USB by mounting this ISO on to it by using software like Imgburn (choose lowest speed while burning to DVD).
Imgburn : http://www.imgburn.com/
This will be your Windows 7 installation disc.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

After disk recovery, restoration incomplete error - error during PININST_BBV - and can't access BIOS

Hi I haad got :Ultrabook HP ENVY 6-1103el
I performed a disk recovery (with disks made myself) to wipe the hard drive. Got to disk 4 of 4 when HP Recovery Manager window appeared with following error message when I click the Details button:
ctoerror.flg file
[21:12:12.07] ChkErrBB.CMD : Detect some error during PININST_BBV.
[21:12:12.07] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[21:12:12.07] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
[21:12:12.08] ----------------------------------------
[21:12:12.08] Critical error condition was detected at BBV1...
[21:12:12.08]
[21:12:12.08] Refer the following file if exists.
[21:12:12.08] - c:\system.sav\Logs\BurnBootWarn.log
[21:12:12.08] - c:\system.sav\Logs\BurnBoot.log
[21:12:12.08]
[21:12:12.08] Switch to 2ndCap's WinPE and show [Recovery Manager]'s Incomplete dialog.
[21:12:12.08] because RM's dialog can't appear on [Start] screen on Win8 environment.
[21:12:12.08] customer may not notice RM already shows Error dialog.
[21:12:12.08]
[21:12:12.08] ----------------------------------------
there might be unexpected reboot during BBV Clean or Last...
The process will cause CTO panic because the image might not be normal...
There are 3 options, Save Log, Details, Retry. When I try 'Retry' it asks for recovery media. I've put my recovery disk 6 and disk 1 in, but nothing happens. Oddly enough, the command prompt (cmd.exe) is open at this point. Now whenever I restart the laptop it goes to the same restoration error screen with the command prompt open and minimized in the lower left hand corner.
Pressing F10 (BIOS Setup) or F11 (System Recovery) after starting doesn't do anything, it just goes straight the the Restoration Incomplete message. Pressing Esc during start goes to the Startup menu, but pressing F10 or F11 there just does the same thing. F2 System Diagnostics works. I ran quick memory check, everything passed. I ran the long hard drive check. Overall it passed, and each one passed except for optimized dst it said 'not available'. When I choose BIOS Management from Diagnostics UEFI, and try either a BIOS Update or BIOS Rollback, I get 'The selected BIOS image was not available.' My system's BIOS ID is F.23. When I try to select a BIOS Image to apply, I've clicked through the file trees and there's nothing there to choose.
I tried recovering the BIOS pressing Windows and b key when starting. The screen stayed blank and the caps lock light kept flashing but nothing happened. The screen just stayed blank and no bios update screen appeared.
Did my BIOS become corrupted during the system restoration from disk?
Any suggestions or options?
Thanks.

Hi larag,
Thank you for your reply.
As I stated in my original post, I suggest you contact HP support and explain in detail the events that happened, when you tried to do the recovery. The contact information is in my original post.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Restoration incomplete message after factory restore

After performing a factory restore I am getting the following mesage. Restoration Incomplete . I have retried full factory and system image restore multiple times and after it completes and the computer restarts the restoration incomplete message comes back. Here is what it says when click on the details button.There might be unexpected reboot during factory update. The process will cause CTO panic because the image might not be normal. and then it states the time.The computer is out of warenty and I do not have factory recovery disk and HP says none are availabe from them. I can axcess the full start up menu including F10 Bios Setup. Any help will be greatly appreciated. Thanks Robert Fuller

Hi Rod Good luck on that one, I did not even get to a recovery manager to start with.I ended up formatting the HDD and reloading with with our Win7 Pro install disc. I used the license I use for my desktop and that sorted my issue. No more problem.

HP Envy m6-1178sa Restoration Incomplete

My laptop came pre-installed with Windows 8, purchased October 2012.
So I was trying to restore my computer because, unfortunately, I had some annoying malware on it.
I ran the HP Recovery Manager to do a full system restore, and towards the end of the reinstallation of software, I get the message:
"Restoration Incomplete
The restoration did not complete.
Please select one of the following buttons:
Save Log, Details, Retry"
I hit retry in the hopes that it might manage it the second time around.
Nope.
After that I tried to Reset using Windows 8's options. It did complete but it wasn't right. It kind of seemed like the software wasn't reinstalled right.
I spoke to my colleagues from work and one of them suggested I tried the discs I had made after purchasing the laptop.
Unfortunately, back to square one. Restoration Incomplete.
So any help would be much appreciated! It's getting quite bothersome. I have noticed a recurring theme of "Was your machine pre-installed with 8" It makes me feel like there is some really big problem on the newest OS.

Exactly the same issue on exactly the same model of laptop, also resolved using your suggestion. So thank you very much!

After USB recovery, restoration incomplete error - error during PININST_BBV.

I performed a USB recovery with USB made by Creating Recovery to wipe the hard drive.following error message when I click the Details button:
ctoerror.flg file
[ 1:06:44.60] ChkErrBB.CMD : Detect some error during PININST_BBV.
[ 1:06:44.60] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[ 1:06:44.60] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
[ 1:06:44.60] ----------------------------------------
[ 1:06:44.60] Critical error condition was detected at BBV1...
[ 1:06:44.60]
[ 1:06:44.60] Refer the following file if exists.
[ 1:06:44.60] - c:\system.sav\Logs\BurnBootWarn.log
[ 1:06:44.60] - c:\system.sav\Logs\BurnBoot.log
[ 1:06:44.60]
[ 1:06:44.60] Switch to 2ndCap's WinPE and show [Recovery Manager]'s Incomplete dialog.
[ 1:06:44.60] because RM's dialog can't appear on [Start] screen on Win8 environment.
[ 1:06:44.60] customer may not notice RM already shows Error dialog.
[ 1:06:44.60]
[ 1:06:44.60] ----------------------------------------
there might be unexpected reboot during BBV Clean or Last...
The process will cause CTO panic because the image might not be normal...
Laptop purchase on July 2013. System updated to 8.1. When recovered from USB to win8, errored. Tried to change BIOS time, didn't work

Hi @John90 ,
Here is a link that might help. The only other thing you could try is borrowing a copy of the exact same Windows 8 version as yours.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Time machine restore incomplete on new hard drive?

My seagate hard drive started to fail on my 2010 27" iMac (S.M.A.R.T fault, unfortunately not covered by the recall) and I have Best Buy geek squad warranty. I also have a 2T Time Capsule with backups, so I wasnt worried about losing any data (lots of pictures and tons of movies loaded into itunes). After waiting for the local best buy to send my machine off to get the HD replaced, getting it back and re-downloading the latest OSX, I restored it from my TC. The restore took about 30 hours (~450 Gb via wifi). Once it was complete I looked at a few things and was satisfied it restored my iMac back to the way it was just before I sent it off. After closer inspection, I noticed that about 1/3 of my movies were missing from iTunes. I thought, no problem, ill just go back 1 day in the time machine and get them. I guess since my hard drive is new, it didn't treat my iMac like it is the same computer. I can't scroll back in time on the time machine, or find a way to get my missing data back. Any help would be appreciated.

Drat.
Try the things in #E4 of Time Machine - Troubleshooting.

Windows 10 update killed my laptop, P2PP BurnBoot Check Failed( restoration incomplete)

I tryed to update to windows 10, but I was in audit mode and could not, I rebooted my laptop out of audit mode and had to restore some software and settings, the restore failed and gave me this BurnBoot error.
I have already tried resetting the BIOS, changing time, putting it in legacy mode etc, still did not work, please help me!

I suggest to try performing a system recovery but set your expectation that this will remove everything that you have from your laptop and will set it up just like a brand new one again, then if you still have plans of going to WIndows 10 upgrade I strongly recommend to run all updates first through WIndows Update and HP SUpport Assistant Here's the guide to perform System Recovery http://support.hp.com/us-en/document/c03489643 Hope this helps

A new twist restoration incomplete but dvd/cd player does not work

contacted virus not sure where I think swagbucks, could not fix tried to do system recovery wound up trying system recovery. Unfortunately my cd player has never worked which was no big deal since I never use it, and of course now I need it and cant use it,
I wanted to download onto a flash drive and try that but really saw nothing in the blog that offers a solution to my problems, any suggestions? thanks for this blog and all that contribute first time I have ever been here very intresting site.

First step is to do the troubleshooting for DVD drive.
https://www.youtube.com/watch?v=8GtKiDFp9ks
Then you may get a recovery USB from HP if the RCD doesn't work.
You can also use an external Optical drive for the recovert CD installation
I'm an HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Click the “Kudos Thumbs Up" on the left if my post helped you.

HP pavilion dv6 restoration incomplete after recovery

I recently try to facotry reset my Hp pavilion dv6 using the recovery usb I make with the HP program when I brought this laptop, but it said "restoration incomplete".
I have ran the hard drive check and mem test at the BIOS and there isnt any problem. I also did a full format on the hard drive and it works. So I dont think there are any bad sector on hard drive.
I did factory reset, miniimze windows install...all the option I can had on the recovery problem but It doesnt work.
Once It finish the installation and laptop is restart, it automatically boot into the HP recovery program and said "restoration incomplete".
I am wondering how can I find my license product key so I can install a windows 7 or any other solution?
Thank you

Sorry no solution for you but I to have a DV6 that no longer allows the DVD drive, bluetooth, web cam, wi-di and probably a load of other things to work to work. I've never been able to make back ups of my settings so like you want to start again. Please HP answer this question as I'd love to try Windows 7 also. P.s. never had so much trouble with a laptop!!!! Runs hot, can't system restore, can't use the simple things I'm used to on any other laptop!!

Recovery incomplete

envy j001tx
I performed a disk recovery (with disks made myself) to wipe the hard drive. Got to disk 6 of 6 when HP Recovery Manager window appeared with following error message when I click the Details button:
ctoerror.flg file
[21:12:12.07] ChkErrBB.CMD : Detect some error during PININST_BBV.
[21:12:12.07] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[21:12:12.07] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
[21:12:12.08] ----------------------------------------
[21:12:12.08] Critical error condition was detected at BBV1...
[21:12:12.08]
[21:12:12.08] Refer the following file if exists.
[21:12:12.08] - c:\system.sav\Logs\BurnBootWarn.log
[21:12:12.08] - c:\system.sav\Logs\BurnBoot.log
[21:12:12.08]
[21:12:12.08] Switch to 2ndCap's WinPE and show [Recovery Manager]'s Incomplete dialog.
[21:12:12.08] because RM's dialog can't appear on [Start] screen on Win8 environment.
[21:12:12.08] customer may not notice RM already shows Error dialog.
[21:12:12.08]
[21:12:12.08] ----------------------------------------
there might be unexpected reboot during BBV Clean or Last...
The process will cause CTO panic because the image might not be normal...
There are 3 options, Save Log, Details, Retry. When I try 'Retry' it asks for recovery media. I've put my recovery disk 6 and disk 1 in, but nothing happens. Oddly enough, the command prompt (cmd.exe) is open at this point. Now whenever I restart the laptop it goes to the same restoration error screen with the command prompt open and minimized in the lower left hand corner.
Pressing F10 (BIOS Setup) or F11 (System Recovery) after starting doesn't do anything, it just goes straight the the Restoration Incomplete message. Pressing Esc during start goes to the Startup menu, but pressing F10 or F11 there just does the same thing. F2 System Diagnostics works. I ran quick memory check, everything passed. I ran the long hard drive check. Overall it passed, and each one passed except for optimized dst it said 'not available'. When I choose BIOS Management from Diagnostics UEFI, and try either a BIOS Update or BIOS Rollback, I get 'The selected BIOS image was not available.' My system's BIOS ID is F.23. When I try to select a BIOS Image to apply, I've clicked through the file trees and there's nothing there to choose.
I tried recovering the BIOS pressing Windows and b key when starting. The screen stayed blank and the caps lock light kept flashing but nothing happened. The screen just stayed blank and no bios update screen appeared.
Did my BIOS become corrupted during the system restoration from disk? I've been in contact with HP tech support and am under warranty. They said if I passed all my diagnostic tests they would send recovery disks, but I'm not sure if that will even work since I can't even get into BIOS. Should I try to restore the BIOS from a USB flash drive? Any other suggestions or options? I'll probably go ahead and have the HP recovery disks sent, just in case.
Thanks. My fourth HP laptop and the first time any of this has happened.

Try this which has worked for many. Enter BIOS and change the date to 1/01/2012. Save & Exit. Boot from Recovery Discs again and let it run throught the process. If it makes it to the first attempt to reboot- enter BIOS again and ensure date is still set. If not change it to 2012 again. If it is let boot resume.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How to restore a older backup with a new SIM

Hi everyone!
I have a problem. I have a Iphone 4, which I bought with a contract in the UK. I recently went to a shop to unblock it (I live in France now)
Before I unlocked it I made a back up (i am new to this stuff) and now my phone is working with a new SIM card but when I do a back up from the Itunes, nothing comes back. I only see the apps that I downloaded in my Itunes, but no texts/emails/messages/photos. I made a newer back up/sync after that by mistake. But that wouldnt be a problem right? I can choose an older back up but it doesnt do much....
I tried it once before I dropped my phone at a shop to unlock it, and I could restore it but it took 3 hours so I cancelled. If I restore my backups now, it only takes a few seconds. So I think it is lost??
So somebody, please help me. I dont know what to do! I lost all my contacts etc...
Please...!
Cheers
Marie

Restore from iCloud Backup
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork

How to restore a particular backup to new ipad?

My problem is that I had to have my ipad air replaced by Apple as my original ipad air developed a fault. I had backed up my original ipad to my W7 PC thru itunes before I got the new one.
Unfortunately my new ipad's name was set to be exactly the same as the original.
When I connected my new ipad to itunes, I tried to restore all the apps etc from my original ipad to my new one.
Somehow Itunes (or me) confused the ipad names and when I reid a restore backup from a computer, it didn't work. To cut a long story short, I can see the backup I want to retore in my Windows backup directory (file name is 0b68edc697a550c9b977b77cd012fa9a0557dfcb).
Can I use this file to restore to my new ipad and restore all the books, music, movies etc that were on the original ipad?

Restore from iCloud Backup
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork

How do you know when icloud restore is finished

Hello,
I am trying to restore an iCloud backup from a phone running iOS6 to an iPad with iOS7. There is about 2.5GB of data, I believe. The apps quickly appeared, but the mail accounts have not. Mail just acts like a brand new setup, with no accounts. And there are no Photos. It's been 3 or 4 hours and nothing seems to be happening.
But in the settings it says that the backup is still being restored.
Is this true? How can I tell if it is doing anything? I don't know whether to tell it to stop restoring and maybe to try again,
Thanks
Bob

Restore from iCloud Backup step by step
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork

HT4759 How can I restore my data (photos) in my ipat?

I made a force shut down in my ipat via my iPhone. I did not have store photos in the iCloud and now I can not restore my photos

Restore from iCloud Backup (if you have backed up to iCloud)
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork

Restoration Incomplete

Similar Messages

Maybe you are looking for