Restore 10.2.0.4.0 64 bit backup on 10.2.0.1.0 32 bit system
Hi,
i have 10.2.0.4.0 installed on linux 4 system like
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
[oracle@itc-790 ~]$ uname -a
Linux 2.6.9-55.EL #1 Fri Apr 20 16:25:34 EDT 2007 x86_64 x86_64 x86_64 GNU/LinuxI want to take its rman backup and restore it on to a system having detail like
[root@itc-355 data]# uname -a
Linux 2.6.9-55.EL #1 Fri Apr 20 16:35:59 EDT 2007 i686 i686 i386 GNU/Linuxit is 32bit system having oracle 10.2.0.1.0 installed on it.
My question is Is it possible to do it ? any database, 64 to 32 bit version will create an issue.
Thanks
umesh
Re: RMAN Backup 32/64 Bit compatibility
Read the link.
Regards
Asif kabir
Similar Messages
-
Trying to restore iphone 4 on Windows 7, 64-bit. It goes so far and then stalls. Have updated itunes, unplugged other USBs. this is my fourth attempt. Any suggestions?
Disable your firewall and antivirus.
-
Unable to install iTunes 10.5.0.142 on Windows 7 64 bits system
I am not able to install the latest version of itunes, version 10.5.0.142, released by Apple last week.
I think it is important to note that there are three pending updates on my system (Windows 7, 64 bit), which keep on failing again and again no matter what the mode of update (manual via microsoft website or automatic via the program provided by microsoft). These are:
1. Security Update for Windows 7 for x64-based Systems (KB2556532)
2. Security Update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)
3. Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243)
The methods that I have tried to install the latest version of itunes (all have failed as of now):
a. Automatic via the previous version of itunes. This tries to download and install itunes in parts, but ultimately leads to the error originally pointed in this thread. Failed.
b. Uninstalling the previous version of itunes completely as mentioned here: http://support.apple.com/kb/HT1923 and also using Microsoft Fixit and then trying to install the new version. Failed.
c. Uninstalling all but apple software update, and then trying to update manually from the software update file available in c:\Program Files (x86)\Apple Software Update folder. Failed.
d. Uninstalling all the versions of visual c++ (2005 and 2008), and then trying to install the latest version of itunes. Then re-installing the latest versions of c++ (2005, 2008 and 2010) along with updates but three as pointed above, and then trying to install the latest version of itunes. Failed.
e. I have tried various permutations and combinations of keeping the firewall, antivirus and even the internet off and on. Failed.
The combination of errors that I have received:
- An error occurred during the installation of assembly ‘Microsoft.VC80.CRT,version=“8.0.50727.6195″,type=“win32,publicKeyToken=“1fc8b3 b9a1e18e3b”,processorArchitecture=“x86”. Please refer to Help and Support for more information. HRESULT: 0x80073712
- Error 7 indicating installation of microsoft .net framework 4.0 for me (http://support.apple.com/kb/TS3074) and
- Error 2 - "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2)
However, I have seen on some websites that people have been able to install the latest version of itunes on their windows 7 64 bits system (surprising, but yeah).
I would appreciate any pointers as to:
?1 How do I install the latest version of itunes on my system.
?2 If the steps are not included in the solution to ?1, how do I update 1., 2., and 3. mentioned above.
?3 If I am able to install itunes 10.5.0.142 on my windows 7 64 bit, would I be able to successfully my iPad2 to iOS5?
Many thanks.I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
Apple helps you find Original Sin with the Windows. -
Problems with restoring my iTunes library after performing an HP backup and system recovery
Hello,
Last Sunday night/Monday morning, I had to perform a system recovery (from the discs supplied by HP) on my HP Compaq Presario SR5310F 32-bit desktop computer running Windows Vista Home Premium, (on the recommendation of samone at HP) and just backing up my 90+ GB iTunes library took 12 hours (the actual system recovery took only about 2-1/2 hours, the following morning). After the recovery process was complete, I 'restored' the backed-up files by either double-clicking or just opening the first backup file (the one whose file name ends in '.1') and following the prompts, which placed the files into something called the 'System Restore Files' folder. I thought I could just restore my iTunes library by dragging and dropping the music, video and iTunes folder files from this System Restore Files folder back into their original places on my computer, but while the song titles did show up in my iTunes library, whenever I tried to actually play one, an exclamation point would appear beside the song's title and I'd get the error message 'iTunes cannot find the file'; when I clicked on 'Find missing file'--or whatever it's called--the C < Users < [username] < Music folder would open, and it would be completely blank, with only the words 'This folder is empty' appearing in it. (And BTW, before you try to recommend the 'Finding missing content in iTunes' or 'How to find missing music in iTunes' articles to me, I should point out that I did try all of the steps in those articles, but my iTunes library was still completely empty at that point, despite trying those steps; that was why I finally tried 'dragging and dropping all of those files back into the Desktop, Downloads, Documents--yes, some really large download files, not from iTunes, showed up in the Documents folder--and also a couple of downloaded music files--again, not from iTunes--showd up 'loose' [by 'loose', I mean not in one of the folders (e.g., Documents, Downloads etc.) in my [username] subfolder] in my [username] subfolder, after which, I was able to get most of my song and video titles listed in iTunes again, but they just won't PLAY! Also, it appears I'm missing about 5 GB from my iTunes library now, as it's saying that I only have about 85.15 GB worth of files in it, where before I had 90+ GB worth of files in it.)
BTW, I can play the files I moved to Desktop, Downloads, etc. if I right-click on the individual files in these locations and then click on 'Play' or 'Open With', but they just won't play in iTunes.
And one more thing: I stupidly deleted my 2 iTunes podcast file titles after I discovered that these, too, would not play; is there any way I can recover these--and my iTunes library--without performing yet ANOTHER system recovery and starting over 'from scratch'? (But if that's what I'll have to do, I'll do it--or else I'll just give up and start all over again with the new computer I plan to buy over the Labor Day weekend [it'll be a 64-bit Windows 7 computer, I know that much at least], as most of my music was ripped from CDs or else downloaded from places like Bandcamp or Amazon MP3, and these downloads were saved to a series of USB flash drives; I was informed that if worst came to worst, I could redownload my iTunes purchases, but my 2 podcasts will be lost forever, as iTunes doesn't 'keep' those--or words to that effect...)
P.S. The computer I'm using has only a 250 GB hard drive, of which 223 GB were available, I couldn't perform the 'Consolidate' function so I could properly back up my iTunes library, as, what with the accumulated Windows downloads (I got this computer in February 2008) and other programs, I had only a few (< 10) GB free--not enough to consolidate the iTunes library, and second, the computer malfunctioned just prior to my performing the system recovery, so that I could no longer log on in 'normal' mode, only in the various safe modes. A lady at Microsoft told me I could back up my iTunes library by logging on in safe mode with networking (since I could do that, albeit with the error message 'Your account has been loaded with a temporary profile') and pasting my iTunes library to my external hard drive, but when I tried this, I got a message listing my iTunes library as '(empty)' when I clicked on iTunes in 'All Programs', and needless to say, my iTunes library wouldn't even open in any of the safe modes (I don't know whether it was 'just' my computer, or whether the lady didn't know what she was talking about--she does work for Microsoft, after all).OK, before you moved the iTunes folder did the library contain entries for your original files?
This is the normal layout of the iTunes folders. From what you said at the outset it would seem that, as far as that copy of your library is concerned, it thinks the media folder is C:\System Recovery Files\C\Users\<User>\Music\iTunes\iTunes Media
Not quite sure where you have moved the original set of library files to (that is the five files listed above and the Album Artwork folder) but you should move these to C:\System Recovery Files\C\Users\<User>\Music\iTunes, (leaving everything else in place) then click the icon to launch iTunes and immediately press and hold down the left shift key until asked to choose or create a library. Click choose and browse to the library file at C:\System Recovery Files\C\Users\<User>\Music\iTunes\iTunes Library.itl - fingers crossed this will open your old database, which will be able to find your old files. If that goes well we can look to moving them somewhere more sensible.
tt2 -
Arrow keys not working on CS2 64 bit system
Recently purchased a new computer with 64 bit system 4meg ram. I installed CS2 and everything seems to be working except the arrow keys and the control +/- features. Arrow keys are working in other programs like word and publisher. Any suggerstions?
I had the same issue on one machine but not another, so I compared the Photoshop install directories and found that (among other things) Tw10122.dat was different between the two. My only guess is that the version we have is localized to a different country, and this is causing the issue. Perhaps a common pirated version is also localized to a different country and that's why this issue is common among pirated versions, even though ours are not pirated.
...Or maybe they are and we just don't know it! Either way, replacing this file with my other version fixed it for me and maybe it will for you, too. Here's what to do:
Close Photoshop (if opened)
Navigate to your Photoshop install directory. This is c:\Program Files (x86)\Adobe\Adobe Photoshop CS2\ by default on x64 systems or c:\Program Files\Adobe\Adobe Photoshop CS2\ on x32.
Find Tw10122.dat and rename it to Tw10122.dat.bak.
Download my attached Tw10122.dat to your install directory.
Launch Photoshop and test it.
If the issue persists, or anything else seems wrong with Photoshop, restore your old Tw10122.dat by deleting mine and renaming Tw10122.dat.bak to its original filename. Please let us all know if this works for you. -
Is it still true, as it says in the ArchWiki, that Partclone cannot be installed in 64 bit systems? (See: http://wiki.archlinux.org/index.php/Partclone).
How would I know this from looking at AUR? I don't see anything in the entry for Partclone that indicates this? (See: http://aur.archlinux.org/packages.php?ID=23841).
Also, as side question: Can does anyone know if partclone can make an image of the / partition from which the system is currently booted? Or would I have to boot into a live CD or some other environment to make an image of my / partition?
Thanks.It builds on 64-bit here:
==> Tidying install...
-> Compressing man pages...
-> Stripping debugging symbols from binaries and libraries...
==> Creating package...
-> Generating .PKGINFO file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: partclone-svn 213-1 x86_64 (lör apr 4 21:57:54 IST 2009)
[fackamato@fackamato-pc partclone-svn]$ sudo pacman -U partclone-svn-213-1-x86_64.pkg.tar.gz
loading package data...
checking dependencies...
(1/1) checking for file conflicts [######################################################################################################################] 100%
(1/1) installing partclone-svn [######################################################################################################################] 100%
[fackamato@fackamato-pc partclone-svn]$ partclone.
partclone.dd partclone.fat12 partclone.fat32 partclone.hfsp partclone.info partclone.ntfsreloc partclone.restore
partclone.fat partclone.fat16 partclone.hfs+ partclone.hfsplus partclone.ntfs partclone.reiserfs partclone.vfat
[fackamato@fackamato-pc partclone-svn]$ partclone.info
Please give the image file name.
[fackamato@fackamato-pc partclone-svn]$ partclone.dd
(null) v0.1.0 (Rev:213M) www.partclone.org, partclone.nchc.org.tw
Usage: (null) [OPTIONS]
Efficiently clone to a image, device or standard output.
-o, --output FILE Output FILE
-O --overwrite FILE Output FILE, overwriting if exists
-s, --source FILE Source FILE
-c, --clone Save to the special image format
-r, --restore Restore from the special image format
-b, --dd-mode Save to sector-to-sector format
-R, --rescue Continue after disk read errors
-dX, --debug=X Set the debug level to X = [0|1|2]
-C, --no_check Don't check device size and free space
-N, --ncurses Using Ncurses User Interface
-X, --dialog output message as Dialog Format
-F, --force force progress
-h, --help Display this help
[fackamato@fackamato-pc partclone-svn]$ -
I had been updating my Windows Vista 64 bit system and as a result of a problem, had to reboot my system. Afterwards, I was no longer able to access iTunes. I got a message stating that there was a problem with some of the files associated with the application. A phone rep at Apple's Customer Service provided me with emails linking instructions on completely uninstalling and reinstalling iTunes. I did the uninstall, then checked for lingering iTunes files and couldn't completely remove some, but tried intalling the latest version of iTunes. It has been running for roughly 24 hours. The status bar is green all the way across, and when I try to cancel, I get the following message: "Are you sure you want to cancel iTunes installation?" I keep hitting "no," but am staring to wonder if there is a problem with the install. Should it take this long if I have roughly 134 gigs of music? I can still see the music in my computer's C drive, so I am worried that there is an error, perhpas because I didn't clear out all the lingering C:\Program Files\Common Files\Apple\ and all the lingering C:\Program Files\iTunes\. Any thoughts?
It is not just the HP. I have 3 HP computes and 2 Dell computers. 2 of the HP and 1 Dell suffer the iTunes internet block. Took me a while to figure it out also. But, the one thing that is different on the Dell, is that I can leave iTunes installed and not open it and everything works. As soon as I open it, internet access goes down. BUT secure sites (https:) works fine.
-
Having a problem with wireless connection. On my Windows XP 32 bit system and a 6510 printer, initi
On my Dell Latitude D620, Windows XP 32 bit system and my 6510 printer wireless connection (Linksys EA4500) , everything works fine after the computer is booted. After a period of time (usually overnight), I lose connection to the printer (the scanner icon with a red x is shown on my Windows task bar and I can't print. Ran Windows Fix and the HP fix programs. The only thing that solves it is to reboot the computer. A second symptom is that my IE8 stops connecting to the internet at the same time (gives a 'waiting for' response that never changes). Firefox still connects OK when this is happening. So I suspect the problem isn't with the printer, but with my Windows set up. It is a fresh XP SP3 install (hard drive crashed, but it happened before also). I reset IE, checked my proxy, no malware, happens with or without firewalls and security programs.
Hoping that someone else has run into this problem. Been all over Google, and the IE doesn't work / Firefox works is fairly common, but none of the fixes helps.If you want you can reload Firefox 4.0 or the last "old" version is 3.6.16 and is available here:
http://www.mozilla.com/en-US/firefox/all-older.html
Just reinstall your choice of FF. The bookmarks are in a different directory and are NOT overwritten. Some of the Add-ons that worked in 3.6 DO NOT work with 4.0, pay attention and head any warnings when you start 4.0.
I had to disable extensions: Flashblock and WOT
Firefox SafeMode? - A troubleshooting mode.
1.You can open the Firefox 4.0 SafeMode by holding the Shft key when you use the Firefox desktop or Start menu shortcut.
To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.
For more help, see this: http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
Hope this helps you out.
Feedback is appreciated especially if this helps you out. -
How can I restore my EQ settings from a Time Machine backup?
I recently reinstalled Mavericks, and restored my user account from a Time Machine backup. In doing so I appeared to have 'lost' my personal EQ settings in iTunes, of which I had perfected quite a few to suit various headphones and speakers I've found myself using over the years.
I have a pre-reinstallation copy of the com.apple.iTunes.eq.plist file (found in /Users/username/Library/Preferences) that I believe contains my EQ settings; opening it in Textedit I can see references to the EQ settings I created.
Having tried restoring this particular file from Time Machine and restarting and finding iTunes doesn't recognise the [old] custom com.apple.iTunes.eq.plist file, does anyone know a way I can re-import my old EQ settings, or do I have to try and manually create them again? (gah)
Thanks for any light you can shed on this!Enter your Time Machine backup (via the TM icon in the menu bar) and find this file
/Users/username/Library/Preferences/com.apple.iTunes.eq.plist
and hit Restore.
It didn't reflect in iTunes immediately, but after a restart it appears to read the new (old) plist file. You should have your old EQ settings back.
Let me know if it worked for you... -
Java plugin not working on any browser (64-bit system)
Hi there!
I'm having a major problem with running Java plugin on all of my browsers (Opera, Chromium and Firefox) under my Arch Linux 64-bit system. The system is fully up-to-date, and Java plugin is being displayed among other plugins on "about:plugins" screen. The Java Environment was installed from Community
[zbyszek@barca ~]$ yaourt -Qs jre
community/jre 6u24-1
Sun/Oracle's Java Runtime Environment
Any ideas how to solve this?Hi,
Maybe (just maybe, dont shoot me afterwards ) this link can help:
http://plugindoc.mozdev.org/linux-amd64.html#java-sun
Thor -
WIndows 7 64-bit system printing to a Windows 2000 server configured as a print server
Is there any way to configure a new Windows 7 64-bit computer to use a Windows 2000 server configured as a print server ?
The printer that I would like to connect to is an HP 4240n LaserJet. I appears that there is only a 64-bit Universal Print Driver available. The server currently uses HP 32-bit PCL5e or PCL6 drivers for all other connected computers. Connection is through a Hewlett-Packard Network Port, using DLC/LLC transport for the embedded 4240n print server.
Installing the HP 64-bit UPD to the WIndows 7 64-bit system, and then attempting to redirect the local port to the Win2k network print server has not worked.
Thanks for any advice.Hi:
See if this works...
Run msconfig.
In the System Configuration screen, Boot tab, Advanced Options, if there is a check mark in the box next to Maximum memory. Remove that checkmark and save your changes.
Reboot and hopefully Windows recognises all the Ram ( minus the reserved ) after restarting.
Please give that a try, and post back and let us know if that frees up some system memory for you.
Paul -
I'm calling to the NaturalPoint Optitrack SDK using activex controls and am trying to pull tracking data from a trackIR 5. I have connected to the camera and wanted to start by just viewing a captured frame. The Optitrack COM provides a function to draw the frame, but needs a hWnd handle for a window to draw to. I tried to call FindWindow from the user32.dll, but only found FindWindowA, FindWindowExA, FindWindowW, and FindWindowExW. I'm using Labview 8.6 (32-bit) on a Windows 7 64 bit system (trying to figure out how access the universities liscense manger to install LV2010 64 bit). Thanks
JaradThe other functions are variants, depending on how you're dealing with strings:
FindWindowW : Unicode names
FindWindowA: ANSI names
FindWindowEx: Searches child windows for the window that has the specified name. You can provide a parent window handle as a starting point. The "A" and "W" follow the same Unicode/ANSI names as FindWindow.
You'd want to use FindWindowA or FindWindowExA since LabVIEW doesn't support Unicode. -
Crystal Reports XI R2 SP2 on Windows Server 2008 ( 32 bit system)
Hi Forum,
I am trying to run a .NET application on a windows server 2008( 32 bit system) with Crystal Reports X1 R2 SP2 installed.
The application does not run and throws the following error in the event log.
Faulting application w3wp.exe, version 7.0.6002.18005, time stamp 0x49e023cf, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x0171ab98, process id 0x%9, application start time 0x%10.
The same application runs fine on a windows server 2003.Also, the same application runs fine, when i remove the crystal reports code. It loads the .NET pages fine.
Please suggest me if i am missing something. Please let me know how can i debug this issue?Hello,
Crystal reports XIR2 is not supported on Windows server 2008.
Check the supporting platforms guide here.
[Crystal Reports XI Release 2 SP2 - Supported Platform Info|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/7081b21c-911e-2b10-678e-fe062159b453]
Thanks,
Bhushan. -
ITunes could not restore the iPhone "___'s iPhone" because the backup was corrupt or not compatible
Ok so bear with me here, it is somewhat of a long story.
I had been using an iPhone 4 for a while, with an old iTunes account that has all my stuff from over the years on it, on my computer. A week ago, I dropped by iPhone 4 in the sink and it got covered with water, despite quickly pulling it out, putting it in rice under a lamp, the phone was shot, and I was without a phone. My Dad, who is on the same AT&T plan with me, was using an iPhone 3. He was available for an upgrade, so he got a new iPhone, and gave me the iPhone 3. Now i'm not an apple master or anything but I have a good idea of what I am doing, normally, I backup my phone to my computer every few months. Basically everytime I plug it in to my computer which isn't very often because I just charge it with the wall charger. So got my SIM card with the same phone number and all, and obviously, while still being my number, it had my dads apps, messages, contacts and photos on it. So I bring it home, and plug it into my computer, I cancel the intial sync, and right click on the phone on the left side of iTunes and hit "restore from backup" I look through the list of backups, and the most recent one I see is from Dec 11, 2011. Which is surprsing because i'm pretty sure I had backed up since then, but I say whatever i'll still get contacts apps and most pictures back etc. So I hit it, and go through with it, and it tells me there was a more recent date of backing up, relieved, I click on that and continue, the normal bar comes up it says something like estimated time 30 minutes, so I walk away, come back 5 minutes later, and I get an error message saying, "iTunes could not restore the iPhone "____'s iPhone" because the backup was corrupt or is not compatible with the iPhone." Confused, I go back and try again, however this time I click on "old backup (the dec 11th one rather than the newer one) and the same thing happens after a few minutes. I go back a third time, and select a time from August of 2011. And I hit restore, and it goes through. However, this happened to be a backup I made right when I got my new iPhone 4, and therefore I basically restored my phone, to having nothing. Thats where I sit right now, with none of my contacts or pictures. I'm not sure if I backed up to iCloud or not and i'm not sure how to retrieve that. Some extra things: When I try to sync my iTunes library and apps onto the new iphone 3, I need to greatly reduce the number of songs and apps beacuse this iPhone is only an 8gb while the old one was 16, (I don't think that is the reason I am getting the error message though because when I sync it clearly says "Your iPhone does not have enough space). Also, this is obviously an iPhone 3, not an iPhone 4, updated with the most recent iTunes software, which, I believe is 5.1.
Any help would be greatly appreciated as I have over 1,400 pictures saved on my old phone (very important things to me) and a contact list of over 300 including important friends, coaches, teachers and workers.
Thank you very much, if it doesn't say my email on here try me at [email protected]
Thanks again
-Drew
Edit: The current phone is an iPhone 3G, not a 3Gs.ashleyfrg2,
you will need to restore your phone as a new device and NOT from backup. If you've been using your phone as recommended, you should have minimal data loss: Photos should have been imported to your computer right after taking them; contacts should be safe in a cloud service or on your computer. You CANNOT downgrade to 4.3.3. -
Will photos created on a 32 bit Windows Vista Home Premium be readable on a Windows 7 64 bit system?
I have around 25,000 photos in jpeg and tiff and in version sets plus some slide shows and blurb books created in the 32 bit system of Windows Vista Home Premium with PSE 10.0 and Premier and have to change to a 64 bit Windows 7 system since Adobe is discontinuing the Photoshop Elements programs in early April of 2013. Will these photos created in 32 bit be readable and editable in the 64 bit system?
Yes. PSE works on both 32bit and 64 bit systems.
PSE is not being discontinued. The on-line service at Photoshop.com is simply moving to Adobe Revel. -
Is there a way to open photoshop cs6 in 32-bit mode on a windows 7 64-bit system.
I was wondering if there is a way to open photoshop cs6 in 32-bit mode on a windows 7 64-bit system, because photoshop won't recognize the pen pressure on my graphics tablet (yiynova msp19u) I read that some users got it to work in 32-bit mode on macs, and all my other programs like zBrush, art rage, sketch book pro recognize the pen pressure on the tablet.
well I am going to assume that the application marked photoshop is the 32-bit application, since the other on is marked 64-bit and I don't see one 32-bit. in any case it still not recognizing pen pressure and i have the newest drivers. The only thing I can think of now is that wacom drivers are interfering with it some how since they don't get along, although I was pretty sure i got rid of all wacom software.
Sigh, it's starting to look like I have to format my computer
Maybe you are looking for
-
Adding a Yahoo Mail user to Family Sharing?
My child uses Yahoo for mail. How can I establish Family sharing if that is the sole mail application he uses?
-
What version of Data Modeler comes with SQL Developer EA 3.1?
Hi: I've looked but can't find what version of Data Modeler is shipped with SQL Developer 3.1 EA1. Is it Data Modeler EA 3.1 or the production Data Modeler 3.0 version? Thanks, Doc
-
Dynamically table read / write with field symbols
Hi, I like to read dynamically from a table via field symbols. The reading part is working. But now I like to do some changes on the entry and then write it to another table with a similar structure. I use SAP 4.6c There I have two problems: 1. At th
-
IDoc ORDERS01 with different shipping addresses
Hi, we are using IDOC ORDERS01 to create customer orders in the ERP. Which is working fine as long as we are using just a partner number as ship-to-partner in the IDoc. Now it should be possible to also use different ship-to-partner addresses. So the
-
I Downloaded FF4 to my Dell Computer and my Security Sofware Quit working. I Took FF4 off my Computer and Put FF 3.16 back on and everything seems to be backup and running. If I want to update to 4.0 What do I have to do about my Virus Program Securi