Restore 10.5.5 system from a current 10.5.6 using time machine ?????
I have been having major start up problems since upgrading to 10.5.6. Is it possible to restore the system back to 10.5.5 using time machine? If so, how would one do it.
Thanks
Post to the Time Machine forum.
Similar Messages
-
Trouble restoring my playlists to iTunes from either my external hard drive or time machine
Hi,
I've been trying to restore my playlists to iTunes from either my external hard drive or time machine, but have had no success so far. I seem only to have .itl files in both places. When I restore iTunes to a previous date, none of the playlists reappear. Same when I try to restore from my back up (though I'm not positive I am doing this proper.y)
I've tried restoring and then importing the itl files to itunes, but I keep getting a message saying 'The file “iTunes Library.itl” cannot be imported because it does not appear to be a valid exported file.' This message appears when importing from my time machine and my hard drive.
I am desperate to get my playlists back as many, many hours of love have gone into them. Please help! Thanks!Correction, I can't locate any .itl files in my external hard drive...
-
Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?
If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
I have a new macbook pro and want to transfer my Mail autofill from my old mac. Never used Time Machine or Migration Assistant -- looks complicated. Any easy way to do this?
caitlinfromcambridge wrote:
Thanks -- I would like to try this. I do not know how to reach hard drive from old mac to new. Can you help me with this?
There are two ways - you can boot your old Mac in Target Mode (reboot your Mac, and as soon as you hear the startup chime hold down the T key on the keyboard until you see the yellow/orange Firewire logo on screen). You can then use a FireWire cable to connect your new mac to your old one. The old Mac hard drive will appear on your new Mac as if it is an external hard drive.
Details on Target Disk Mode: http://support.apple.com/kb/ht1661
If you don't have a firewire cable but you do have a home network (i.e. both computers can access the Internet at the same time), you can share the hard drive on your old Mac and then connect to it on your new Mac.
Good article on sharing your hard drive: http://support.apple.com/kb/HT1549
Finally, if the above doesn't thrill you, you can hook an external drive to your old Mac, copy the mail folder over to it, then connect the external drive to your new Mac and copy it over. It's two steps, but if you don't have a firewire cable and aren't comfortable with sharing over a network it will work just as well - you just have to wait for the mail folder to copy twice instead of once.
If you get stuck post back! -
Downgrade from Mavericks to Snow Leopard without using Time Machine
Hello.
I upgraded from Snow Leopard (OSX 10.6.8) and upgraded to Mavericks but the Time Machine was not turned on. Is there anyway to downgrade back to Snow Leopard?
I contacted Apple Support and was told that it is not advisable to format the drive and do a clean install using Snow Leopard installation Cd's since Mavericks made changes to the hardware on the iMac. They advise using time Machine to downgrade, but this option is not available to me. Is this true?? Or can I re-install Snow Leopard with no issues?
Thanks.Mavericks - reverting back from:
https://discussions.apple.com/docs/DOC-6162 -
Transferring data from old imac to new imac using Time Machine.
Old imac is a 2006 that does not take Lion. New Mac just purchased this month is a 27in imac. I tried to set it up using firewire, but old imac wont join new imac to to the different versions of Snow Leopard and Lion. I wnt back in and used the Time machine to start my back up. New imac keeps going to sleep, bu I think it is stilll trasferring. Old imac shows msg that Time Machine is unable to complet this task, but after clicking OK. It continues to march. I think I have 10 hours left on the transfer. Is there an easier way to do this?
you are welcome. and here is a link to a pic of firewire connectors. the one on the left is FW800 and on the right is FW400
http://www.smelectronics.com/images2/FIREWIRE96.jpg -
my document.numbers can not be opened how can i recover the version from yesterday? i was not using time machine and it was not in icloud. is there an app i can buy that might help
Thanks Andy,
I wish I could have told my sister about this as she could not open my homepage back before my new iWeb site. She now can open my site without the yet in case denial window does appear = I thank you.
I think my iWeb site works as Noone has said otherwise from any platform etc...
Alex L
I do agree that should not have to be a consideration for any users so i agree that it would be great if Apple could allow simplicity to run seemlessly.
I have had this problem since Homepage, and here is
what has worked for me. I send out the link, and
then for PC users I send the link with "<" after the address (without quotation
marks. e.g., <http://site.com>).
I also put a note that if that doesn't work, to just
copy and paste the link into a browser. With that I
have only had 1 person say they still can't open.
Everyone else gets it to work.
It's a lot to do and seems like a hassle, but you get
used to it.
Hope this helps!
Andy Martini
PS - APPLE! When are you going to fix this??! It
seems like such a small thing yet you guys have been
stumped for YEARS on this! -
iMac crashed, trying to use Time Machine backup. In Restore From:it only offers Macintosh HD on ..... (grayed). There are backups listed below. When I click on a current backup and click on continue I get a "Select a Destination" with Searching for disk, but nothing comes up.
I am connected to my Passport if that helps, but I think that is where it is getting the backup list.
Any help on how to proceed?
Thanks,Thanks for your help on this. I was trying to restore from a new drive. The problem I have is that Time Machine will not let me do so, so far.
When I go into 'Restore from Time Machine Back up) I can access the Time Machine HD ok. But then when I go onto next page (Select a Back Up) the 'Restore From' option only has the greyed out name of my crashed HD (this seems wrong?). If I continue the process to erase starts and then stops, message says:
An error occurred while adding a recovery system to the destination disk.
it only seems to want me to back up to my crashed HD which I have no intention of using -
Can I transfer system from old macbook to new macbook using same OS with time machine?
I have a MacBook running snow Leopard. Thinking of getting a new Pro but want to just transfer my entire desktop and system to new MacBook using Time Machine restore. Is this possible? If not what are my other options so I do not have to rebuild desktop?
Thanks!You can do it either directly from the older MacBook or from Time Machine. Your new MBP is unlikely to boot to the system on the MB as the newer Pro will have a later OS build and different hardware drivers among other things.
Just use Setup Assistant. When you boot the new MBP, after the welcome video you'll be taken into Setup Assistant; you'll be asked if you want to transfer your Applications, Home Folder and prefences from another source. Choose either 'from another Mac' or 'from a TM backup' as appropriate, and connect the Mac (by firewire) or the TM drive when prompted and let it do it's thing.
That will ensure you get one account with no permissions errors and all your stuff should work just as it did on the MB. -
I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?
dglenn9000 wrote:
I created a new user account just to see if it was my user Library or if there was something wrong with my system. And the new user account is doing most of the same things so I will need to do a full restore anyway.
Not necessarily. I'd suggest downloading and installing the "combo" update. That's a combination (thus the clever name) of all the updates to Leopard since it was first released, so installing it should fix anything that's gone wrong since then, such as with one of the normal "point" updates. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards. -
HT1553 Can I restore only the system, leaving other files untouched, using Time Machine? (OS 10.5.8)
The last time I restarted my Mac, Bluetooth was gone. I want to restore my system, but leave all other files and applications untouched. Is that a possibility using Time Machine?
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
Re-Creating Entire System on New Mac From External Drive Using Time Machine
Hi all -
Sorry if this question has been posted, I've look extensively and haven't seen it in this exact form, and I'm paranoid about this stuff. I also can't get a straight answer from Apple store employees.
I travel extensively with my MacBook, and when I'm home, I use Time Machine to back up all data from my MacBook onto an OWC external hard drive.
My question is, if my MacBook is ever lost, stolen, or damaged, and its internal hard drive is no longer accessible, and I have to buy a new MacBook, can I use Time Machine to access the backup data on my external drive and transfer it to my new MacBook's internal drive, thus re-creating my entire system on my new MacBook, including all settings, preferences, files, absolutely everything exactly as it was on my old MacBook?
This is by far the most likely need I'll ever have for this backup data, so if Time Machine doesn't help me to re-create my system exactly as it was on a new laptop, it's not of much use, and I'll switch backup software.
Related question - I read somewhere that Time Machine keeps making backups on your external hard drive until it runs out of space. Does that mean it literally uses up every bit of space on the external drive? Because overstuffing my old external drive is what killed it, and cost me a huge chunk of change and several weeks to get the recoverable data off the drive. Or does Time Machine know enough to stop backing up when there is only "X" amount of space left on the drive, and if so, at what amount of remaining free space does it stop?
Thanks for your help!If you need to restore everything to a new Mac, you simply have your TM drive connected when you start up the new Mac and during the Welcome routine that runs when you start up a new Mac for the first time you will be presented with the option of migrating your user info, settings, files, applications, etc., from a Time Machine backup. You just click "Yes" and all your backed-up info will be transferred to your new Mac.
Time Machine continuous "cleans up" backups so you do not need to worry about TM pushing a drive to its capacity limits, or even close to that. -
I am trying to restore my old Macbook Pro data using Time Machine to a new Macbook Air from an external hard drive, but when I restore I get two diferrent loggin accounts and I only wnat one loggin account to access all my data/files?
This web site might answer all of your Time machine questions:
http://pondini.org/OSX/Home.html
Ciao. -
How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.
So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946 -
How can I restore files from my old iMac to this new purchased MacBook Air? I am using time machine backup in my old imac.
Hi,
Try Target Disk Mode
OS X Yosemite: Transfer files between two computers using target disk mode
There is also Migration Assistant.
OS X Yosemite: Transfer your info from a computer or storage device
Maybe you are looking for
-
Today I lost my IPad and was FREAKING OUT !!!!! When a couple of store attendants told me to use the ICLOUD find my Iphone option in order to erase all the content just in case it fell into wrong hands. Within an hour via survelance video w
-
hai i am installing sap netweaver 2004s with a IBM DB2 as database.I got an error in Create database phase. INFO 2011-11-28 02:22:06 Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DB6/CENTRAL/AS/createDatabase.clp' to 'C:/Program Files/s
-
After downloading Mountain on my MacPro, just installing my MacBook Pro hard disk cracked
Please why?
-
Adobe acrobat 7 pro not supported?
error message tells me not supported??
-
Translation of standard text urgent
Hi All, I need to translate standard text that I have created in English languague to other languagues. How can I do this. If I have to do this in transaction SE63 then please provide me complete steps to do this. Thanks, shravan G